Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “electrode interface”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,621 records · Page 90

Comparison of purity in single walled carbon nanotube gas detectors with Pd and Ti electrodes using low frequency noise techniques

This work deals with oxide traps properties of single walled carbon nanotubes (SWCNTs) based gas sensors using Random telegraph signals (RTS) and low frequency (LF) noise techniques. RTS signals are two or more levels switching events that we observe measuring the drain current of transistors with Ti (RTS{sub 1}) and Pd (RTS{sub 2}) contacts. RTS noise is analyzed in time and frequency domains. Time domain analysis allows us to identifying slow traps (three traps) responsible to RTS noises (energetic position and cross capture section). These traps undetectable by other techniques, e.g. deep level transient spectroscopy (DLTS) technique, are localized in the gate oxide region. The spatial localization of the three traps in the SWCNT/SiO{sub 2} interface are determined using numerical simulations (y{sub Trap1} ≈0.6 nm, y{sub Trap2} ≈0.9 nm and y{sub Trap3} ≈0.3 nm). (RTS{sub 1}) noise is attributed to trap1 and (RTS{sub 2}) to traps 2 and 3. From RTS analysis in frequency domain, are able to extract the cut-off frequencies of a single trap even at very low frequencies (for RTS{sub 1} noise f{sub c} = 10 Hz (trap1) and for RTS{sub 2} noise f{sub c1} = 4 Hz (trap2), f{sub c2} = 50 Hz (trap 3)). These results are in good agreement with those obtained by analysis in time domain and confirm the localization of each trap from the SWCNT/SiO{sub 2} interface. This is the first time that this kind of studies is performed on CNTFETs used as gas sensors and gives us some interesting hints on the potential phenomena related to these new generation of carbon based nanomaterials based devices in the field of electronics.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Microstructure Scale Lithium-Ion Battery Modeling: Part III. When and Where Lithium Plating Occurs and its Correlation with the Electrode Microstructure

Li-ion battery performance and degradation are closely related to the cell’s underlying electrode microstructure. Electrode microstructures are typically characterized with volume-averaged properties that neglect the impact of local heterogeneities. However, local heterogeneities create hot spots that can trigger degradation onset. Herein, a microstructure scale electrochemical model is used to investigate the impact of microstructure heterogeneity on lithium plating. The model predicts lithium plating is not uniform, even when considering a relatively small portion of the electrode (a cross-sectional area of 154×144 µm 2 ), preferring to plate on larger particles as compared to smaller particles. While local heterogeneities control where plating occurs, the model predicts that volume-averaged properties control when plating occurs. Additionally, the model predicts that the active material specific surface area has a linear relationship with the plating onset. However, the linear relationship between increased active material surface area and delayed plating response appears to be sensitive to the microstructure feature used to increase the active interface area. Here, a comparative case-study is explored where the specific surface area is increased by either reducing the active material particle diameter, adding open-porosity cracks, or increasing the active material surface roughness. The model predicts that increasing the specific surface area by reducing the active material particle diameter is the most effective strategy for delaying lithium plating. At 6C, reducing particle size is shown to be 3 and 20 times more effective than, respectively, adding open-porosity cracks and increasing surface roughness. A dual-layer electrode architecture combining gradations both for average properties and uniformities is eventually proposed to improve homogeneous material utilization and reduce degradation at high charge rates.

25 ENERGY STORAGE↗

Triboionization: a Novel Ionization Method by Peeling of Cohesive Substances for Mass Spectrometry

A novel ionization/sampling method termed triboionization was developed. Triboionization is an ionization method that only uses cohesive substances, such as food wrap or sticky tape, and does not require an electrode, electric power supply, heat source, light source, radiation, or gas, unlike most other conventional ambient ionization methods. In this study, the sample compound attached to adhesive tape or plastic wrap was quickly peeled off at a distance of approximately 2 cm from the atmospheric interface of a mass spectrometer. All of the five types of food wrap and 13 types of adhesive tape tested successfully ionized caffeine. Nine out of ten model compounds were detected as the corresponding molecular ions in the positive or negative mode by this ionizing contrivance using an oriented polypropylene adhesive tape. The detected molecular ions were typically protonated molecules or sodium adducts in the positive mode or deprotonated molecules in the negative mode. The elemental compositions of the observed ions were confirmed within 5 ppm by high-resolution mass spectrometry. The triboionization phenomenon was considered to depend on physical and electronic events caused by peeling off a cohesive substance. Triboionization is able to provide a compact ion source using only mechanical mechanisms. Additionally, triboionization allows sticky tape to be used as a convenient sampling device for surface analysis. .

74 ATOMIC AND MOLECULAR PHYSICS↗

Microstructure and martensitic transformation in Si-coated TiNi powders prepared by ball milling

Graphical abstract: - Highlights: • Amorphous Si-coated TiNi powders were prepared successfully by ball milling. • Ti{sub 4}Ni{sub 4}Si{sub 7} was formed at the interface between Si and TiNi after annealing. • Si-coated Ti–Ni powders displayed the R phase after annealing. - Abstract: Si was coated on the surface of Ti–49Ni (at%) alloy powders by ball milling in order to improve the electrochemical properties of the Si electrodes of secondary Li ion batteries and then the microstructure and martensitic transformation behavior were investigated by means of scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS), X-ray diffraction (XRD) and differential scanning calorimetry (DSC). Ti–Ni powders coated with Si were fabricated successfully by ball milling. As-milled powders consisted of highly deformed Ti–Ni powders with the B2 phase and amorphous Si layers. The thickness of the Si layer coated on the surface of the Ti–Ni powders increased from 3–5 μm to 10–15 μm by extending the milling time from 3 h to 48 h. However, severe contamination from the grinding media, ZrO{sub 2} occurred when the ball milling time was as long as 48 h. By heating as-milled powders to various temperatures in the range of 673–873 K, the highly deformed Ti–Ni powders were recovered and Ti{sub 4}Ni{sub 4}Si{sub 7} was formed. Two-stage B2–R–B19′ transformation occurred when as-milled Si-coated Ti–49Ni alloy powders were heated to temperatures below 873 K, above this temperature one-stage B2–B19′ transformation occurred.

36 MATERIALS SCIENCE↗

Interfacial Reactions and Performance of Li 7 La 3 Zr 2 O 12 -Stabilized Li–Sulfur Hybrid Cell

Herein, we report on the characterization of a Li–S hybrid cell containing a garnet solid electrolyte (Li 7 La 3 Zr 2 O 12 , LLZO) and conventional liquid electrolyte. While the liquid electrolyte provided ionically conductive pathways throughout the porous cathode, the LLZO acted as a physical barrier to protect the Li metal anode and prevent polysulfide shuttling during battery operation. This hybrid cell exhibited an initial capacity of 1000 mAh/g(S) and high Coulombic efficiency (>99%). The interface between the liquid electrolyte and LLZO was studied using electrochemical impedance spectroscopy and X-ray photoelectron spectroscopy (XPS). These results indicate that a spontaneous interfacial reaction layer formed between the LLZO and liquid electrolyte. XPS depth profiling experiments indicate that this layer consisted of Li-enriched phases near the surface (e.g., Li 2 CO 3 ) and intermediate Li–La–Zr oxides in subsurface regions. The reaction layer extended well beyond the LLZO surface, and bulk pristine LLZO was not observed even at the deepest sputtering depths used in this study (~90 nm). Overall, these results highlight that developing stable electrode/electrolyte interfaces is critical for solid-state batteries and their hybrids.

36 MATERIALS SCIENCE↗

Photoresponse from noble metal nanoparticles-multi walled carbon nanotube composites

In this Letter, we investigated the photo-response of multi wall carbon nanotube-based composites obtained from in situ thermal evaporation of noble metals (Au, Ag, and Cu) on the nanotube films. The metal deposition process produced discrete nanoparticles on the nanotube outer walls. The nanoparticle-carbon nanotube films were characterized by photo-electrochemical measurements in a standard three electrode cell. The photocurrent from the decorated carbon nanotubes remarkably increased with respect to that of bare multiwall tubes. With the aid of first-principle calculations, these results are discussed in terms of metal nanoparticle-nanotube interactions and electronic charge transfer at the interface.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Autonomous Flow Electrochemistry for Accelerated Catalyst Discovery

Our objective is to develop an Autonomous Chemical Experimentation (ACE) platform that accelerates discovery of new catalytic transformations and other energy-relevant chemical reactions and processes. We intentionally designed ACE to be highly modular, both with respect to its rapid deployment to different chemistries and experimental workflows as well as incorporation of a wide range of different AI algorithms. In addition to the development of the core software architecture, initial efforts were made to incorporate Large Language Models to provide human-interpretable reasoning of the optimizer’s actions, and to develop a user-friendly graphical interface for experimental researchers. ACE was demonstrated using a flow electrocatalysis platform containing an inline FTIR spectrometer for real-time analysis and quantification of the reaction outcome. Human-in-the-loop experiments were performed in which a human researcher conducted an experiment using electrode potentials suggested by ACE, then fed the spectral data back to ACE for decision making. After confirming the successful function of the optimizer, efforts were next directed to automation of the hardware and performed full autonomy tests using three reactions: catalytic oxidation of formate, catalytic oxidation of cyclohexanol, and oxidation of hydroquinone. These studies confirm that ACE can close the loop between reaction execution, analysis, and optimization. They also reveal that more improved product detection methods will be essential for ACE to make well-informed decisions for reactions with low conversions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Fuel cell seal

An example fuel cell seal assembly includes a seal configured to restrict flow of a fuel cell fluid through at least one of an outer lateral edge of a first gas diffusion layer, an outer lateral edge of a membrane electrode assembly, and an outer lateral edge of a second gas diffusion layer. The outer lateral edge of the first gas diffusion layer is laterally spaced from the outer lateral edge of the second gas diffusion layer. An example method of sealing a fuel cell interface includes limiting flow of a fuel cell fluid using a seal configured to restrict flow through an outwardly facing edge of at least one of a first gas diffusion layer and an outwardly facing edge of a second gas diffusion layer. The outwardly facing edge of the first gas diffusion layer is spaced from the outwardly facing edge of the second gas diffusion layer.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Conversion Reaction Mechanisms in Lithium Ion Batteries: Study of the Binary Metal Fluoride Electrodes

Materials that undergo a conversion reaction with lithium (e.g., metal fluorides MF{sub 2}: M = Fe, Cu, ...) often accommodate more than one Li atom per transition-metal cation, and are promising candidates for high-capacity cathodes for lithium ion batteries. However, little is known about the mechanisms involved in the conversion process, the origins of the large polarization during electrochemical cycling, and why some materials are reversible (e.g., FeF{sub 2}) while others are not (e.g., CuF{sub 2}). In this study, we investigated the conversion reaction of binary metal fluorides, FeF{sub 2} and CuF{sub 2}, using a series of local and bulk probes to better understand the mechanisms underlying their contrasting electrochemical behavior. X-ray pair-distribution-function and magnetization measurements were used to determine changes in short-range ordering, particle size and microstructure, while high-resolution transmission electron microscopy (TEM) and electron energy-loss spectroscopy (EELS) were used to measure the atomic-level structure of individual particles and map the phase distribution in the initial and fully lithiated electrodes. Both FeF{sub 2} and CuF{sub 2} react with lithium via a direct conversion process with no intercalation step, but there are differences in the conversion process and final phase distribution. During the reaction of Li{sup +} with FeF{sub 2}, small metallic iron nanoparticles (<5 nm in diameter) nucleate in close proximity to the converted LiF phase, as a result of the low diffusivity of iron. The iron nanoparticles are interconnected and form a bicontinuous network, which provides a pathway for local electron transport through the insulating LiF phase. In addition, the massive interface formed between nanoscale solid phases provides a pathway for ionic transport during the conversion process. These results offer the first experimental evidence explaining the origins of the high lithium reversibility in FeF{sub 2}. In contrast to FeF{sub 2}, no continuous Cu network was observed in the lithiated CuF{sub 2}; rather, the converted Cu segregates to large particles (5-12 nm in diameter) during the first discharge, which may be partially responsible for the lack of reversibility in the CuF{sub 2} electrode.

Wang, Feng↗

Beyond Volume Variation: Anisotropic and Protrusive Lithiation in Bismuth Nanowire

Materials storing energy via an alloying reaction are promising anode candidates in rechargeable lithium-ion batteries (LIBs) due to their much higher energy density than the current graphite anode. Until now, the volumetric expansion of such electrode particles during lithiation has been considered as solely responsible for cycling-induced structural failure. Here, we report different structural failure mechanisms using single-crystalline bismuth nanowires as the alloying-based anode. The Li–Bi alloying process exhibits a two-step transition, that is, Bi–Li 1 Bi and Li 1 Bi–Li 3 Bi. Interestingly, the Bi–Li 1 Bi phase transition occurs not only in the bulk Bi nanowire but also on the particle surface showing its characteristic behavior. The bulk alloying kinetics favors a Bi-(012)-facilitated anisotropic lithiation, whose mechanism and energetics are further studied using the density functional theory calculations. More importantly, the protrusion of Li 1 Bi nanograins as a result of anisotropic Li–Bi alloying is found to dominate the surface morphology of Bi particles. The growth kinetics of Li 1 Bi protrusions is understood atomically with the identification of two different controlling mechanisms, that is, the dislocation-assisted strain relaxation at the Bi/Li 1 Bi interface and the short-range migration of Bi supporting the off-Bi growth of Li 1 Bi. As loosely rooted to the bulk substrate and easily peeled off and detached into the electrolyte, these nanoscale protrusions developed during battery cycling are believed to be an important factor responsible for the capacity decay of such alloying-based anodes at the electrode level.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Characteristics of surface states at the insulator-semiconductor interface in the thin-film electroluminescent structures based on ZnS:Mn

Distributions of the density of occupied surface electron states at the cathode interface between the insulator and phosphor in thin-film electroluminescent emitters are simulated in relation to the energy on the basis of experimental data. The dependences of the above distributions on the conditions of excitation of emitters are obtained. It is shown that these distributions shift to deeper levels of surface states as the frequency of excitation voltage is decreased and the pause between two neighboring switched-on states of emitters is increased, which corresponds to the cascade mechanism of relaxation of electrons captured by surface states. The coefficient of cascade capture of electrons prior to relaxation ((4-5) x 10{sup -12} cm{sup 2}/s), instantaneous lifetime of electrons prior to relaxation (0.2-0.25 s), cross section for capture of electrons to deeper levels of surface states (in excess or on the order of (6.7-8.3) x 10{sup -21} cm{sup 2}), largest values of the densities of occupied surface states at the cathode boundary from which electron tunnel ({approx}2.5 x 10{sup 13} cm{sup -2}), and energy density of above-specified surface states (7 x 1014 cm{sup -2} eV{sup -1}) have been determined. The values of the quasi-equilibrium Fermi level at the surface in the course of the activity of electroluminescent emitters varies in the range from 0.9 to 1.35 eV, depending on conditions of excitation.

36 MATERIALS SCIENCE↗

Self-powered and broadband photodetectors based on graphene/ZnO/silicon triple junctions

A self-powered photodetector with ultrahigh sensitivity, fast photoresponse, and wide spectral detectivity covering from 1000 nm to 400 nm based on graphene/ZnO/Si triple junctions has been designed, fabricated, and demonstrated. In this device, graphene serves as a transparent electrode as well as an efficient collection layer for photogenerated carriers due to its excellent tunability of Fermi energy. The ZnO layer acts as an antireflection layer to trap the incident light and enhance the light absorption. Furthermore, the insertion of the ZnO layer in between graphene and Si layers can create build-in electric field at both graphene/ZnO and ZnO/Si interfaces, which can greatly enhance the charge separation of photogenerated electron and hole pairs. As a result, the sensitivity and response time can be significantly improved. It is believed that our methodology for achieving a high-performance self-powered photodetector based on an appropriate design of band alignment and optical parameters can be implemented to many other material systems, which can be used to generate unique optoelectronic devices for practical applications.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Intrinsic Chemical Reactivity of Silicon Electrode Materials: Gas Evolution

In this work, we explore how the chemical reactivity toward an aprotic battery electrolyte changes as a function of lithium salt and silicon surface termination chemistry. The reactions are highly correlated, where one decomposition reaction leads to a subsequent decomposition reaction. We report the data show that the presence of silicon hydrides (SiH$_x$) promotes the formation of CO gas, while surface oxides SiO$_x$ drive the formation of CO 2 . The extent and rate of oxidation depend on the surface basicity of the SiO 2 surface species. The most acidic surfaces seem to hinder CO 2 generation but not the decomposition of the salt. Indeed, the presence of F-containing salts (LiPF 6 and LiTFSI) promotes the reactions between carbonate electrolyte and silicon surfaces. Surfaces with high Li content seem to be the most passivating to gassing reactions, pointing to a pathway to stabilize the interfaces during cell formation and assembly.

25 ENERGY STORAGE↗

Improving the fast-charging capability of NbWO-based Li-ion batteries

The discovery of Nb-W-O materials years ago marks the milestone of charging a lithium-ion battery in minutes. Nevertheless, for many applications, charging lithium-ion battery within one minute is urgently demanded, the bottleneck of which largely lies in the lack of fundamental understanding of Li + storage mechanisms in these materials. Herein, by visualizing Li + intercalated into representative Nb 16 W 5 O 55 , we find that the fast-charging nature of such material originates from an interesting rate-dependent lattice relaxation process associated with the Jahn-Teller effect. Furthermore, in situ electron microscopy further reveals a directional, [010]-preferred Li + transport mechanism in Nb 16 W 5 O 55 crystals being the “bottleneck” toward fast charging that deprives the entry of any desolvated Li + through the prevailing non-(010) surfaces. Hence, we propose a machine learning-assisted interface engineering strategy to swiftly collect desolvated Li + and relocate them to (010) surfaces for their fast intercalation. As a result, a capacity of ≈ 116 mAh g −1 (68.5% of the theoretical capacity) at 80 C (45 s) is achieved when coupled with a Li negative electrode.

batteries↗

Linking void and interphase evolution to electrochemistry in solid-state batteries using operando X-ray tomography

Despite progress in solid-state battery engineering, our understanding of the chemo-mechanical phenomena that govern electrochemical behavior and stability at solid-solid interfaces remains limited compared to solid-liquid interfaces. Here, we use operando synchrotron X-ray computed microtomography to investigate the evolution of lithium/solid-state electrolyte interfaces during battery cycling, revealing how the complex interplay among void formation, interphase growth, and volumetric changes determines cell behavior. Void formation during lithium stripping is directly visualized in symmetric cells, and the loss of contact that drives current constriction at the interface between lithium and the solid-state electrolyte (Li10SnP2S12) is quantified and found to be the primary cause of cell failure. The interphase is found to be redox-active upon charge, and global volume changes occur due to partial molar volume mismatches at either electrode. Finally, these results provide new insight into how chemo-mechanical phenomena can impact cell performance, which is necessary to understand for the development of solid-state batteries.

42 ENGINEERING↗

Heterostructures based on inorganic and organic van der Waals systems

The two-dimensional limit of layered materials has recently been realized through the use of van der Waals (vdW) heterostructures composed of weakly interacting layers. In this paper, we describe two different classes of vdW heterostructures: inorganic vdW heterostructures prepared by co-lamination and restacking; and organic-inorganic hetero-epitaxy created by physical vapor deposition of organic molecule crystals on an inorganic vdW substrate. Both types of heterostructures exhibit atomically clean vdW interfaces. Employing such vdW heterostructures, we have demonstrated various novel devices, including graphene/hexagonal boron nitride (hBN) and MoS{sub 2} heterostructures for memory devices; graphene/MoS{sub 2}/WSe{sub 2}/graphene vertical p-n junctions for photovoltaic devices, and organic crystals on hBN with graphene electrodes for high-performance transistors.

36 MATERIALS SCIENCE↗