Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “density”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,621 records · Page 90
All sourcesNASA NTRSDOE OSTI
NASA NTRS1977

Measurements of copper ground-state and metastable level population densities in a copper-chloride laser

The population densities of both the ground and the 2D(5/2) metastable states of copper atoms in a double-pulsed copper-chloride laser are correlated with laser energy as a function of time after the dissociation current pulse. Time-resolved density variations of the ground and excited copper atoms were derived from measurements of optical absorption at 324.7 and 510.6 nm, respectively, over a wide range of operating conditions in laser tubes with diameters of 4 to 40 mm. The minimum delay between the two current pulses at which lasing was observed is shown to be a function of the initial density and subsequent decay of the metastable state. Similarly, the maximum delay is shown to be a function of the initial density and decay of the ground state.

Nerheim, N. M.↗
NASA NTRS1977

Technological development of cylindrical and flat shaped high energy density capacitors

Cylindrical wound metallized film capacitors rated 2 micron F 500 VDC that had an energy density greater than 0.3 J/g, and flat flexible metallized film capacitors rated at 2 micron F 500 VDC that had an energy density greater than 0.1 J/g were developed. Polysulfone, polycarbonate, and polyvinylidene fluoride (PVF2) were investigated as dielectrics for the cylindrical units. PVF2 in 6.0 micron m thickness was employed in the final components of both types. Capacitance and dissipation factor measurements were made over the range 25 C to 100 C, and 10 Hz to 10 kHz. No pre-life-test burning was performed, and six of ten cylindrical units survived a 2500 hour AC plus DC lift test. Three of the four failures were infant mortality. All but two of the flat components survived 400 hours. Finished energy densities were 0.104 J/g at 500 V and 0.200 J/g at 700 V, the energy density being limited by the availability of thin PVF2 films.

Zelik, J. A.↗
NASA NTRS1977

X-ray clusters of galaxies - Correlations with optical morphology and galaxy density

The entire sample of 37 X-ray clusters of galaxies detected by the Ariel 5 satellite at high latitudes is analyzed optically. Morphological types (for all clusters) and central galaxy densities (for all clusters with measured redshifts) are determined, and the positions, redshifts, and richness groups of the set of Southern Hemisphere X-ray clusters are estimated. The X-ray luminosity is found to be correlated with both cluster morphology and central galaxy density. The observed correlations are consistent with a thermal-bremsstrahlung model in which the hot intracluster gas density is proportional to the galaxy density, and the temperature is proportional to the galaxy velocity dispersion.

Bahcall, N. A.↗
NASA NTRS1977

Wintertime density perturbations near 50 km in relation to latitude

Standard and reference atmospheres which depict the horizontal distribution of air density in the stratosphere and mesosphere are not realistic in that they do not provide information on the large departures from standard that may occur during a given month, nor on the time- and space-scales of atmospheric perturbations responsible for these departures. In the present paper, it is shown how this information can be obtained from a special analysis of satellite radiance measurements. Plots of the mean zonal radiance, obtained with the VTPR instrument, and the corresponding 50-km density show not only the expected strong poleward gradient of density, but also a strong density surge from late December to early January, affecting all latitudes.

Quiroz, R. S.↗
NASA NTRS1978

Power density in direct nuclear-pumped He-3 lasers

The interaction of neutron beams with He-3 gas is of interest for nuclear pumped lasers. The effects of spectral dependence of the neutron beam, neutron attenuation in the gas-filled laser tube, and transport of the charged-particle He-3(n, p)He-3 reaction products are treated in detail. An expression for the energy density as a function of position within the tube, tube radius, operating pressure, and neutron fluence is given. The maximum energy density within the optical cavity is achieved when the tube radius is 3.26/P where P (atm) is the operating pressure. The variation of radius by 50% above and below optimum will change the energy density at most by 10%, although performance degrades quickly for radii outside this range. If the optimum tube radius is used for each operating pressure, then the power density on the centerline (kW/cu cm) is given as 9.3 x 10 to the -18th power times the operating pressure times flux in a thermal neutron environment of flux (n/sq cm sec).

Wilson, J. W.↗
NASA NTRS1979

Primordial inhomogeneities in the expanding universe. I - Density and velocity distributions of galaxies in the vicinities of rich clusters

The density profiles and Hubble flow deviations in the vicinities of rich galaxy clusters are derived for a variety of models of initial density and velocity perturbations at the recombination epoch. The galaxy correlation function, measured with respect to the Abell clusters, is used to normalize the theoretical models. The angular scales of the required primordial inhomogeneities are calculated. It is found that the resulting density profiles around rich clusters are surprisingly insensitive to the shape of the initial perturbations and also to the cosmological density parameter, Omega. However, it is shown that the distribution of galaxy radial velocities can provide a possible means of deriving Omega.

Silk, J.↗
NASA NTRS1979

The seasonal variation of ozone density in the Martian atmosphere

A one-dimensional, time-dependent model has been developed to investigate seasonal variations in ozone density in the Martian atmosphere. The model utilizes data for atmospheric temperature, pressure, and water vapor abundance observed by Viking. The results indicate that a high ozone density is not produced near the winter solstice but is in rather late winter, when the amount of water vapor is still small and the solar radiation can penetrate more deeply. A similar condition met in early winter does not necessarily produce a high ozone density because of the predicted higher HO2 density. Seasonal variations in ozone abundance are discussed in terms of the abundances of H2O and H2 and the seasonal variations in their reaction products H2O2 and HOx. The roles of transport, the effects of ozone loss to the surface, and the differences between northern and southern hemisphere ozone distributions are also discussed.

Shimazaki, T.↗
NASA NTRS1979

XUV electron density diagnostics for solar flares

Potential electron-density diagnostics for the high-temperature component of solar flares are studied with reference to the wavelength region from 171 to 630 A. The specific ions discussed include Fe IX through Fe XV, Ni XI through Ni XVII, and ions in the beryllium, boron, carbon, and nitrogen isoelectronic sequences. Line ratios that could be useful as density indicators under solar-flare conditions are indicated, available data for the ions considered are reviewed, and several theoretical intensity ratios are plotted. The results are employed to determine the electron-density distribution as a function of electron temperature for several spectra from two flares. For these flares it is found that the electron density increases from 10 billion to 500 billion per cu cm for a temperature increase from 1 million to 10 million K.

Dere, K. P.↗
NASA NTRS1980

The unique determination of density from high-order potentials

The existence of higher-order potentials is postulated, and that the density function can be determined from this set of potentials is demonstrated. Moreover, it is shown that there is a one-to-one correspondence between such potentials and the density function, provided it is continuous. Finally, it is noted that this demonstration includes a method of constructing the density function from the set of potentials as well as indicating how to approximate the density from incomplete knowledge of the potentials.

Johnson, G. G.↗
NASA NTRS1979

The N III and O IV intersystem multiplets as density indicators for solar plasmas

The usefulness of the relative intensities of lines within the N III intersystem multiplet near 1750 A as an electron density indicator for solar plasmas is discussed. Although the relative intensities of lines in the multiplet are density sensitive, the intensity ratios should at present be used with caution. Errors of the order of 20% in transition probabilities and excitation rate coefficients can lead to order of magnitude errors in density determinations. It is demonstrated that the intensity ratio of one of the N III intersystem lines and an allowed line from a different ion may also be used as a density indicator in the 10 to the 9th to 10 to the 11th per cu cm regime.

Feldman, U.↗
NASA NTRS1980

Simulation study of geometric shape factor approach to estimating earth emitted flux densities from wide field-of-view radiation measurements

A study was performed on the use of geometric shape factors to estimate earth-emitted flux densities from radiation measurements with wide field-of-view flat-plate radiometers on satellites. Sets of simulated irradiance measurements were computed for unrestricted and restricted field-of-view detectors. In these simulations, the earth radiation field was modeled using data from Nimbus 2 and 3. Geometric shape factors were derived and applied to these data to estimate flux densities on global and zonal scales. For measurements at a satellite altitude of 600 km, estimates of zonal flux density were in error 1.0 to 1.2%, and global flux density errors were less than 0.2%. Estimates with unrestricted field-of-view detectors were about the same for Lambertian and non-Lambertian radiation models, but were affected by satellite altitude. The opposite was found for the restricted field-of-view detectors.

Weaver, W. L.↗
NASA NTRS1980

Solar corona electron density distribution

The paper discusses the three and one-half months of single-frequency time delay data which were acquired from the Helios 2 spacecraft around the time of its solar occultation. The excess time delay due to integrated effect of free electrons along the signal's ray path could be separated and modeled following the determination of the spacecraft trajectory. An average solar corona and equatorial electron density profile during solar minimum were deduced from the time delay measurements acquired within 5-60 solar radii of the sun. As a point of reference at 10 solar radii from the sun, an average electron density was 4500 el/cu cm. However, an asymmetry was found in the electron density as the ray path moved from the west to east solar limb. This may be related to the fact that during entry into occultation the heliographic latitude of the ray path was about 6 deg, while during exit it was 7 deg. The Helios density model is compared with similar models deduced from different experimental techniques.

Esposito, P. B.↗
NASA NTRS1980

Parametric dependence of ion temperature and electron density in the SUMMA hot-ion plasma using laser light scattering and emission spectroscopy

Hot-ion plasma experiments were conducted in the NASA Lewis SUMMA facility. A steady-state modified Penning discharge was formed by applying a radially inward dc electric field of several kilovolts near the magnetic mirror maxima. Results are reported for a hydrogen plasma covering a wide range in midplane magnetic flux densities from 0.5 to 3.37 T. Input power greater than 45 kW was obtained with water-cooled cathodes. Steady-state plasmas with ion kinetic temperatures from 18 to 830 eV were produced and measured spectroscopically. These ion temperatures were correlated with current, voltage, and magnetic flux density as the independent variables. Electron density measurements were made using an unusually sensitive Thomson scattering apparatus. The measured electron densities range from 2.1 x 10 to the 11th to 6.8 x 10 to the 12th per cu cm.

Snyder, A.↗
NASA NTRS1980

Ionospheric density enhancement during relativistic electron precipitation

The temporal evolution of the ionospheric density enhancement produced by a widespread relativistic electron precipitation (REP) has been observed with the Chatanika Radar. The REP was associated with a substorm particle energization event, and both the ionospheric absorption and density perturbation exhibited an approximately 90 min periodicity associated with the particles' longitudinal drift. A 80-keV characteristic energy for the precipitating electrons is deduced from ground-based and satellite data. At the maximum of the event, electrons deposited approximately 50 ergs/sq cm per sec in the ionosphere, producing a peak density of 500,000/cu cm at 89 km altitude. At that time the radar observed densities greater than 100,000/cu cm between 70 km and 110 km altitude and riometer absorption at 30 MHz was approximately 12 db.

Foster, J. C.↗
NASA NTRS1981

A model of temporal variations in ozone density in the Martian atmosphere

Temporal variations of the ozone density profile in the Martian atmosphere at high latitudes are calculated for the course of a Martian year, taking into account seasonal and diurnal variations in temperature, water vapor and solar radiation. Calculations are based on a model including 35 neutral photochemical reactions, and vertical eddy diffusion using a time step of 12 min for the region from the surface to 240 km altitude. Results are found to be in better agreement with Mariner 9 observations of the time and magnitude of the seasonal maximum than previous model calculations. The diurnal variation is predicted to be small near the solstices, with the nighttime ozone density greater than the daytime and the magnitude of the difference dependent on season. Opposite temporal variations are predicted for ozone densities above and below about 25 km, and an ozone density maximum at 35-40 km is obtained. It is suggested that the effects of an aerosol layer may not be important in enhancing predicted ozone concentration, and may even decrease it.

Shimazaki, T.↗
NASA NTRS1980

Melt density and the average composition of basalt

Densities of residual liquids produced by low pressure fractionation of olivine-rich melts pass through a minimum when pyroxene and plagioclase joint the crystallization sequence. The observation that erupted basalt compositions cluster around the degree of fractionation from picritic liquids corresponding to the density minimum in the liquid line of descent may thus suggest that the earth's crust imposes a density fiber on the liquids that pass through it, favoring the eruption of the light liquids at the density minimum over the eruption of denser more fractionated and less fractionated liquids.

Stolper, E.↗
NASA NTRS1981

Quasar number density evolution

A simple model of quasar number density evolution is presented based on the occurrence of quasar-like radio galaxies (i.e., strong optical emission lines and type 2 radio morphology) exclusively in regions of low galaxy and intergalactic medium (IGM) density. This suggests a limit for the IGM density of 10 to the -4th (+ or - 1) per cu cm below which quasars are allowed to form and above which they are not allowed. In the recent past (z not greater than 1), the inferred quasar environments are the outskirts of clusters and near the centers of groups of galaxies. However, models of rich cluster evolution consistent with current X-ray observations predict gas densities of less than 10 to the -4th per cu cm in cluster cores in the more distant past (z between 1 and 5). This suggests that quasars were allowed to form in the cores of rich clusters at those epochs, which explains both the rich absorption spectra of high-redshift quasars and the absence of clusters surrounding quasars at lower redshift.

Stocke, J. T.↗
NASA NTRS1981

Density power spectrum in the local interstellar medium

Observational evidence is presented for the existence of interstellar medium electron density irregularities over a wide range of scale sizes. Radio scattering observations associated with the wavenumber range of about 10 to the -11th to 10 to the -6th/m are consistent with a density spectrum of the wavenumber form -3.7 + or - 0.6. At lower spatial wavenumbers (10 to the -16th to 10 to the -18th/m) the power spectrum can be estimated by (1) computation of the density fluctuations near the outer scale of the spectrum, (2) comparison with density irregularities predicted by theoretical models of the interstellar medium, and (3) comparison with observations of the velocity structure function.

Armstrong, J. W.↗