Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “cross section”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,621 records · Page 90

S-193 scatterometer backscattering cross section precision/accuracy for Skylab 2 and 3 missions

Procedures for measuring the precision and accuracy with which the S-193 scatterometer measured the background cross section of ground scenes are described. Homogeneous ground sites were selected, and data from Skylab missions were analyzed. The precision was expressed as the standard deviation of the scatterometer-acquired backscattering cross section. In special cases, inference of the precision of measurement was made by considering the total range from the maximum to minimum of the backscatter measurements within a data segment, rather than the standard deviation. For Skylab 2 and 3 missions a precision better than 1.5 dB is indicated. This procedure indicates an accuracy of better than 3 dB for the Skylab 2 and 3 missions. The estimates of precision and accuracy given in this report are for backscattering cross sections from -28 to 18 dB. Outside this range the precision and accuracy decrease significantly.

Krishen, K.↗

Thermal Cross Section Measurements At The RPI LINAC

Recently, a cold moderator was designed and developed for use at the Rensselaer Polytechnic Institute Linear Accelerator (RPI LINAC). This cold moderator proved to easily and safely couple to an existing neutron producing target, while enhancing neutron flux below 0.02 eV by up to a factor of 8 by cooling polyethylene down to 29 K. This cold moderator capability allowed for significantly improved counting statistics below 0.02 eV not previously possible due to a poor signal to background ratio. Additionally, testing was performed to characterize the energy resolution of the new cold moderator system and found the system easily capable of resolving resonances in Ta-181 at 4 and 10 eV, while also clearly resolving the Bragg edges found in Be metal below 0.01 eV. Furthermore, following the design and development of a cold polyethylene moderator, a series of thermal total cross section measurements were performed for polyethylene, polystyrene, Plexiglas and yttrium hydride in the thermal region. These measurements serve to help validate thermal scattering law (TSL) evaluations in the 0.0005 – 1 eV energy range. For polyethylene and polystyrene, two sets of experiments were performed – one with the Enhanced Thermal Target (ETT) and another with the ETT plus the new cold moderator capability (ETTC). The yttrium hydride and Plexiglas measurements were only performed with the ETTC. The measurements for polyethylene help to validate the data processing methodology when using the ETTC, while extending the measured range of polyethylene down to 0.0005 eV. Two different Plexiglas, Plexiglas G and Plexiglas G-UVT, and two different concentrations of yttrium hydride, H/Y = 1.85 and 1.68, were measured. Overall, all materials had generally good agreement with their ENDF/B-VIII.0 TSL evaluations, though some discrepancies were noticed. In the case of the yttrium hydride, the high energy oscillations in the hydrogen cross section and the low energy Bragg edges in the yttrium cross section were clearly seen. These measurements represent the first total cross section measurements that encompass the entire thermal region from 0.0005 – 1 eV for polystyrene and yttrium hydride.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Radar cross section reduction by absorber covering

Radar cross section (RCS) reduction by absorber covering is experimentally studied by employing microwave diversity imaging. Experimental results show that broadband absorber covering is not effective at reducing the co-polarized (the transmitting and receiving antennas have opposite sense of circular polarization) RCS of a plate when the incident wave approximates the edge-on direction but is effective at reducing the cross-polarized (both the transmitting and receiving antennas have the same sense of circular polarization) RCS for all incident directions. The surface current absorber covering is effective at reducing the nonspecular energy and multiple bounces regardless of the polarization status of the measurement.

Li, H. J.↗

Status of the Muon Neutrino Charged-Current Zero Mesons Cross Section at the NOvA Near Detector

NOvA is a long-baseline accelerator neutrino experiment at Fermilab whose physics goals include precision neutrino oscillation as well as cross-section measurements. We present the status of the measurement of a muon neutrino charged-current cross section with zero mesons in the final state at the NOvA near detector. This measurement is being made with respect to the kinematics of the final state muon. The chosen interaction channel is especially sensitive to quasielastic and meson exchange current interactions and aims to provide experimental constraints for the development of models of neutrino interactions. It will also provide a handle for constraining cross section systematic uncertainties in oscillation analyses in current and future experiments. For particle identification, we use a convolutional neural network (CNN) trained on individual particles simulated in the NOvA near detector that allows us to select the desired signal while reducing the potential bias from neutrino interaction modeling. Charged pion background constraining is further improved via Michel electron tagging.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Fragmentation cross sections of 28Si at 14.5 GeV/nucleon

We used CR39 plastic nuclear track detectors (C12H18O7) in combination with automatic track measurement techniques to determine total charge changing and partial cross sections for the production of fragments of charge ZF = 6 to ZF = 13 in collisions of 28Si beam nuclei at 14.5 GeV/nucleon in targets H, C, CR39, (C18H38O), Al, Cu, Ag, and Pb. By application of factorization rules, measured partial cross sections are separated into pure nuclear and electromagnetic components. The cross sections for electromagnetic dissociation agree with theoretical models. The results are consistent with a Z2 dependence of virtual photon spectra.

NASA Discipline Number 04-10↗

Aqueous harvesting of 88 Zr at a radioactive-ion-beam facility for cross-section measurements

Isotope harvesting is a method of collecting the long-lived radioisotopes that build up during the operation of ion-beam facilities in a way that is useful for subsequent research. As a demonstration of this method for the collection of a group IV metal at a fragmentation facility, the high-energy Zr 88 secondary beam produced from a 140-MeV/u Mo 92 primary beam at the National Superconducting Cyclotron Laboratory (NSCL) was stopped in a water target. The setup aimed to mimic the aqueous beam dump that will be implemented at the Facility for Rare Isotope Beams (FRIB). The collected Zr 88 and accompanying Y 88 decay daughter were radiochemically extracted from the solution and made into target samples suitable for neutron-capture cross-section measurements. These samples were then irradiated at two reactor facilities, and the Zr 88 average thermal-neutron-capture cross section ( σ T ) and resonance integral ( I ) were determined to be σ T = ( 8.04 ± 0.63 ) × 10 5 b and I = ( 2.53 ± 0.28 ) × 10 6 b. The σ T value agrees well with previous results and I , determined for the first time here, was found to be the largest measured resonance integral by two orders of magnitude. The Y 88 thermal-neutron-capture cross section was determined to be less than 1.8 × 10 4 b. This work demonstrates the steps needed to make cross-section measurements with samples produced via aqueous isotope harvesting.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗

Measurement of Compton scattering cross section at a few GeV electron energy

Electron Compton scattering is the best known fundamental QED process, however, a precision measurement of its cross section for a beam energy above 1 GeV has been lacking up to now. An updated high precision measurement of the neutral pion lifetime via the Primakoff effect (PrimEx-II) experiment was performed in Hall B of Jefferson Lab in 2010. The experiment used small angle coherent photoproduction of π 0 ’s in the Coulomb field of a nucleus, i:e: the Primakoff effect, to determine the lifetime with a precision of less than 1:5% . It therefore requires thorough understanding of the underlying systematic uncertainties. To facilitate that data for well known electromagnetic processes were taken concurrently with the photoproduction data. This analysis pertains to measuring the Compton scattering cross section, which occurs with similar kinematics to the primary process. The combination of the well established theory for this process with large collected statistics allowed to extract this cross section with high precision in an energy region of 4-5 GeV for 12 C and 28 Si targets. The results of this analysis will be presented.

Ye, Li↗

Neutron physics of the Re/Os clock. II. The (n,n{sup '}) cross section of {sup 187}Os at 30 keV neutron energy

The inelastic neutron-scattering cross section of {sup 187}Os has been determined in a time-of-flight experiment at the Karlsruhe 3.7-MV Van de Graaff accelerator. An almost monoenergetic beam of 30-keV neutrons was produced at the threshold of the {sup 7}Li(p,n){sup 7}Be reaction. Information on the inelastic channel is required for reliable calculations of the so-called stellar enhancement factor, by which the laboratory cross section of {sup 187}Os must be corrected in order to account for the thermal population of low-lying excited states at the temperatures of s-process nucleosynthesis, in particular of the important state at 9.75 keV. This correction represents a crucial step in the interpretation of the {sup 187}Os/{sup 187}Re pair as a cosmochronometer.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Cross section and transverse single-spin asymmetry of muons from open heavy-flavor decays in polarized p + p collisions at s = 200 ? ? GeV

The cross section and transverse single-spin asymmetries of μ - and μ + from open heavy-flavor decays in polarized p+p collisions at √s = 200 GeV were measured in this paper by the PHENIX experiment during 2012 at the Relativistic Heavy Ion Collider. Because heavy-flavor production is dominated by gluon-gluon interactions at √s = 200 GeV, these measurements offer a unique opportunity to obtain information on the trigluon correlation functions. The measurements are performed at forward and backward rapidity (1.4 < |y| < 2.0) over the transverse momentum range of 1.25 < p T < 7 GeV/c for the cross section and 1.25 < p T < 5 GeV/c for the asymmetry measurements. The obtained cross section is compared to a fixed-order-plus-next-to-leading-log perturbative-quantum-chromodynamics calculation. Finally, the asymmetry results are consistent with zero within uncertainties, and a model calculation based on twist-3 three-gluon correlations agrees with the data.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Status of the muon neutrino charged-current zero mesons cross section measurement in the NOvA near detector

NOvA is a long-baseline accelerator neutrino experiment at Fermilab whose physics goals include precision neutrino oscillation as well as cross-section measurements. We present the status of the measurement of muon neutrino charged-current cross section with zero mesons in the final state at the NOvA near detector. This measurement will be made with respect to the kinematics of the final state particles. Our chosen interaction channel is especially sensitive to quasielastic and meson exchange current interactions and will provide a handle for constraining the cross section systematic uncertainties in oscillation analyses in current and future experiments. For particle identification, we use a convolutional neural network (CNN) trained on individual particles simulated in the NOvA near detector that allows us to select the desired signal while reducing the potential bias from neutrino interaction modeling. Charged pion background constraining is further improved via Michel electron tagging.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Measurement of the $WW+WZ$ production cross section in a semileptonic decay mode at CDF

The measurement of the WW + WZ production cross section in a semileptonic decay mode is presented. The measurement is carried out with 4.6 fb -1 of integrated luminosity collected by the CDF II detector in √s = 1.96 TeV proton-antiproton collisions at the Tevatron. The main experimental challenge is identifying the signal in the overwhelming background from W+jets production. The modeling of the W+jets background is carefully studied and a matrix element technique is used to build a discriminant to separate signal and background. The cross section of WW + WZ production is measured to be σ(p$\bar{p}$ → WW + WZ) = 16.5 -3.0 +3.3 pb, in agreement with the next-to-leading order theoretical prediction of 15.1 ± 0.9 pb. The significance of the signal is evaluated to be 5.4σ. This measurement is an important milestone in the search for the Standard Model Higgs boson at the Tevatron.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Measurement of differential cross-sections of a single top quark produced in association with a W boson at $\sqrt{s}={13}{\text {TeV}}$ with ATLAS

The differential cross-section for the production of a W boson in association with a top quark is measured for several particle-level observables. The measurements are performed using 36.1fb -1 of pp collision data collected with the ATLAS detector at the LHC in 2015 and 2016. Differential cross-sections are then measured in a fiducial phase space defined by the presence of two charged leptons and exactly one jet matched to a b-hadron, and are normalised with the fiducial cross-section. Results are found to be in good agreement with predictions from several Monte Carlo event generators.

43 PARTICLE ACCELERATORS↗

Measurement of the e{sup +}e{sup –} → ηπ{sup +}π{sup –} cross section in the center-of-mass energy range 1.22–2.00 GeV with the SND detector at the VEPP-2000 collider

In the experiment with the SND detector at the VEPP-2000 e+e– collider the cross section for the process e{sup +}e{sup –} → ηπ{sup +}π{sup –} has been measured in the center-of-mass energy range from 1.22 to 2.00 GeV. Obtained results are in agreement with previous measurements and have better accuracy. The energy dependence of the e{sup +}e{sup –} → ηπ{sup +}π{sup –} cross section has been fitted with the vector-meson dominance model. From this fit the product of the branching fractions B(ρ(1450) → ηπ{sup +}π{sup –})B(ρ(1450) → π{sup +}π{sup –}) has been extracted and compared with the same products for (ρ(1450) → ωΠ{sup 0} and (ρ(1450) → π{sup +}π{sup –} decays. The obtained cross section data have been also used to test the conservation of vector current hypothesis.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Spectral-average cross section validation in LR-0 reactor spectrum of {sup 55}Mn(n,2n), {sup 90}Zr(n,2n) and {sup 127}I(n,2n) reactions - 25362

This article deals with the validation of spectral average cross-sections (SACS) of {sup 55}Mn(n,2n){sup 54}Mn, {sup 90}Zr(n,2n){sup 89}Zr and {sup 127}I(n,2n){sup 126}I reactions in well-defined LR-0 reactor spectrum. The measurement of SACS for selected reactions is of high interest because they are used for the practical reactor dosimetry and also for refinement of prompt fission neutron spectra of {sup 235}U in the region of higher energies. Various experiments for description of neutron field in reactor and detector characterization, which are necessary for validation, are described. The spectral average cross-sections are derived from Net Peak Areas of irradiated samples measured using a semiconductor high purity germanium detector. The spectral average cross section in {sup 235}U prompt fission neutron spectrum was experimentally determined to be 0.239 ± 0.015 mb for {sup 55}Mn, 1.209 ± 0.052 mb for {sup 127}I and 0.107 ± 0.005 mb for {sup 90}Zr. The obtained results were compared with MCNP6 calculations using ENDF/B-VII.0, ENDF/B-VII.1, JEFF-3.1, JEFF-3.2, JENDL-3.3, JENDL-4, ROSFOND-2010, CENDL-3.1 and IRDFF-1.05 nuclear data libraries. Notable discrepancies were found in {sup 90}Zr(n,2n){sup 89}Zr and {sup 127}I(n,2n){sup 126}I reactions. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗