Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “closure model”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,621 records · Page 90

Small Scale Response and Modeling of Periodically Forced Turbulence

The response of the small scales of isotropic turbulence to periodic large scale forcing is studied using two-point closures. The frequency response of the turbulent kinetic energy and dissipation rate, and the phase shifts between production, energy and dissipation are determined as functions of Reynolds number. It is observed that the amplitude and phase of the dissipation exhibit nontrivial frequency and Reynolds number dependence that reveals a filtering effect of the energy cascade. Perturbation analysis is applied to understand this behavior which is shown to depend on distant interactions between widely separated scales of motion. Finally, the extent to which finite dimensional models (standard two-equation models and various generalizations) can reproduce the observed behavior is discussed.

Bos, Wouter↗

Assessing CLUBB PDF Closure Assumptions for a Continental Shallow-to-Deep Convective Transition Case Over Multiple Spatial Scales

Assumed-PDF (probability density function) higher-order turbulence closures (APHOCs) are now widely used for parameterizing boundary layer turbulence and shallow convection in Earth system models (ESMs). A better understanding of the resolution-dependent behavior of APHOCs is essential for improving the performance of next-generation ESMs with intended horizontal resolutions finer than 10 km. In this study, we evaluate the PDF family of Analytic double-Gaussian 1 implemented in Cloud Layers Unified By Binormals (CLUBB) over a range of spatial scales (Dx) from 2 to 100 km. A 120-km-wide large eddy simulation (LES) for a continental convection case during 2016 Holistic Interactions of Shallow Clouds, Aerosols, and Land-Ecosystems (HI-SCALE) field campaign serves as benchmark to evaluate the PDF closure using an off-line approach. We find during the shallow convection period, the CLUBB PDF closure tends to produce positive biases of cloud properties and liquid water flux near cloud base for all scales of analysis. It produces negative biases for these variables near cloud top that are more severe for Dx larger than 25 km. Results show that replacing the CLUBB-parameterized moisture and temperature skewnesses with LES-derived ones can fix most of the biases if clipping of input moments is allowed to prevent the occurrence of unrealizable solutions. Overall, the performance of the PDF closure is better for smaller Dx = 2–5 km than for larger Dx = 50–100 km; for a given grid spacing, it is better when the convective clouds become deeper in the late afternoon. Likely causes for the resolution dependence and implications for improving the PDF closure are discussed.

54 ENVIRONMENTAL SCIENCES↗

Single-Channel Current Through Nicotinic Receptor Produced by Closure of Binding Site C-Loop

We investigated the initial coupling of agonist binding to channel gating of the nicotinic acetylcholine receptor using targeted molecular-dynamics (TMD) simulation. After TMD simulation to accelerate closure of the C-loops at the agonist binding sites, the region of the pore that passes through the cell membrane expands. To determine whether the structural changes in the pore result in ion conduction, we used a coarse-grained ion conduction simulator, Biology Boltzmann transport Monte Carlo, and applied it to two structural frames taken before and after TMD simulation. The structural model before TMD simulation represents the channel in the proposed resting state, whereas the model after TMD simulation represents the channel in the proposed active state. Under external voltage biases, the channel in the active state was permeable to cations. Our simulated ion conductance approaches that obtained experimentally and recapitulates several functional properties characteristic of the nicotinic acetylcholine receptor. Thus, closure of the C-loop triggers a structural change in the channel sufficient to account for the open channel current. This approach of applying Biology Boltzmann transport Monte Carlo simulation can be used to further investigate the binding to gating transduction mechanism and the structural bases for ion selection and translocation.

60 APPLIED LIFE SCIENCES↗

Effects of pressure gradients on turbulent premixed flames

The influence of a constant acceleration on a turbulent premixed flame is studied by direct numerical simulation. This acceleration induces a mean pressure gradient across the flame brush, leading to a modification of the turbulent flame structure due to differential buoyancy mechanisms between heavy cold fresh and light hot burnt gases. Such a pressure gradient may be encountered in practical applications in ducted flames. A favorable pressure gradient, i.e. the pressure decreases from unburnt to burnt gases, is found to decrease the flame wrinkling, the flame brush thickness, and the turbulent flame speed. A favorable pressure gradient also promotes counter-gradient turbulent transport. On the other hand, adverse pressure gradients tend to increase the flame brush thickness and turbulent flame speed, and promote classical gradient turbulent transport. The balance equation for the turbulent flux of the Favre averaged progress variable is also analyzed. The first results show that the fluctuating pressure term, cannot be neglected as generally assumed in models. Simple models assuming that a high mean pressure gradient may only be balanced by the cross-dissipation term seem too approximate. This analysis has to be continued to compare simulation data and closure schemes proposed for the transport equation. The analysis developed by Veynante et al.(1995) has been extended to imposed acceleration and mean pressure gradients. A simple model for the turbulent flux is proposed and validated from simulation data. Then, a modified criterion is derived to delineate between counter-gradient and gradient turbulent diffusion. In fact, counter-gradient diffusion may occur in most practical applications, especially for ducted flames.

Veynante, D.↗

Simplifying the Tracking of Waste Disposal Inventories: Process Improvement for Rapid Data Interpretation and Reduced Errors - 16143

Tracking the inventory of low-level radioactive waste at an operating disposal facility offers unique challenges. At the Savannah River Site's Saltstone Disposal Facility (SDF) the inventory used in Performance Assessment modeling is determined based on radionuclide concentrations from the aqueous waste in a feed tank and the volume of the waste that is transferred from the feed tank to the Saltstone Production Facility (SPF). These inputs are reported quarterly. As such, the disposal inventories are also updated quarterly; however, due to decay and ingrowth, the inventory values for some radionuclides can be misrepresented if the data is not tracked appropriately. Additionally, it is not feasible to analyze the feed tank samples for every possible radionuclide; therefore, a series of adjustments are necessary to estimate the concentrations of radionuclides that are not explicitly measured but still pose a potential dose risk. Prior to 2015, the SDF disposal inventories were updated using a series of spreadsheets that required users to perform a significant number of steps (including manually transferring data back and forth between a separate decay and ingrowth calculation software). Despite this labor intensive approach, the process only provided single point-in-time results. With multiple steps, minimal automation, and limited result data, this approach to inventory tracking was not ideal and minor mistakes were often identified during the equally cumbersome review process. As a process improvement, the simplified SDF Waste Inventory Disposed Estimator (SDF-WIDE) Model was developed using GoldSim software. The software allows users to identify specific dates to define the duration of the simulation, from the beginning of operations until the time of future facility closure, and provides graphical interfaces for displaying data over time. Further, GoldSim's Contaminant Transport Module is used to perform the decay and ingrowth calculations, making the model completely self-contained (i.e., there is no need to transfer intermediate data back and forth between different programs). GoldSim also includes model 'versioning' features that significantly reduce the time needed to perform the appropriate quality assurance reviews as required for each quarterly inventory update. By transitioning from the complex spreadsheets to the simplified SDFWIDE model, the time needed to perform updates to the SDF inventory has been reduced from days to hours, the risk of making human errors has been greatly mitigated, and users are able to quickly observe trends in the data over time. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Modeling seven years of event horizon telescope observations with radiatively inefficient accretion flow models

An initial three-station version of the Event Horizon Telescope, a millimeter-wavelength very-long baseline interferometer, has observed Sagittarius A* (Sgr A*) repeatedly from 2007 to 2013, resulting in the measurement of a variety of interferometric quantities. Of particular importance is that there is now a large set of closure phases measured over a number of independent observing epochs. We analyze these observations within the context of a realization of semi-analytic radiatively inefficient disk models, implicated by the low luminosity of Sgr A*. We find a broad consistency among the various observing epochs and between different interferometric data types, with the latter providing significant support for this class of model of Sgr A*. The new data significantly tighten existing constraints on the spin magnitude and its orientation within this model context, finding a spin magnitude of a=0.10{sub −0.10−0.10}{sup +0.30+0.56}, an inclination with respect to the line of sight of θ=60{sup ∘}{sub −8{sup ∘}−13{sup ∘+5{sup {sup ∘+10{sup {sup ∘}}}}}}, and a position angle of ξ=156{sup ∘}{sub −17{sup ∘}−27{sup ∘+10{sup {sup ∘+14{sup {sup ∘}}}}}} east of north. These are in good agreement with previous analyses. Notably, the previous 180° degeneracy in the position angle has now been conclusively broken by the inclusion of the closure-phase measurements. A reflection degeneracy in the inclination remains, permitting two localizations of the spin vector orientation, one of which is in agreement with the orbital angular momentum of the infrared gas cloud G2 and the clockwise disk of young stars. This may support a relationship between Sgr A*'s accretion flow and these larger-scale features.

79 ASTRONOMY AND ASTROPHYSICS↗

Self-contained filtered density function

The filtered density function (FDF) closure is extended to a “self-contained” format to include the subgrid-scale (SGS) statistics of all of the hydro-thermo-chemical variables in turbulent flows. These are the thermodynamic pressure, the specific internal energy, the velocity vector, and the composition field. In this format, the model is comprehensive and facilitates large-eddy simulation (LES) of flows at both low and high compressibility levels. A transport equation is developed for the joint pressure-energy-velocity-composition filtered mass density function (PEVC-FMDF). In this equation, the effect of convection appears in closed form. The coupling of the hydrodynamics and thermochemistry is modeled via a set of stochastic differential equation for each of the transport variables. This yields a self-contained SGS closure. We demonstrated how LES is conducted of a turbulent shear flow with transport of a passive scalar. Finally, the consistency of the PEVC-FMDF formulation is established, and its overall predictive capability is appraised via comparison with direct numerical simulation (DNS) data.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Review of mixing length estimates and effects of toroidicity in a fluid model for turbulent transport in tokamaks

Basic aspects of turbulent transport in toroidal magnetized plasmas are discussed. In particular the fluid closure has strong effects on zonal flows which are needed to create an absorbing boundary for long wave lengths and also to obtain the Dimits nonlinear upshift. The fluid resonance in the energy equation is found to be instrumental for generating the L–H transition, the spin-up of poloidal rotation in internal transport barriers, as well as the nonlinear Dimits upshift. The difference between the linearly fastest growing mode number and the corresponding longer nonlinear correlation length is also addressed. It is found that the Kadomtsev mixing length result is consistent with the non-Markovian diagonal limit of the transport at the nonlinearly obtained correlation length.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

On the effect of subgrid drag closures

The effect of two subgrid drag closures on the flow of air and Geldart group A particles is presented in this study. A subgrid drag model based on fitting simulation data obtained from finely resolved simulations and a drag model based on the energy minimization approach are both used to solve a gas-solids flow in the riser section of a circulating fluidized bed. The numerical results using a coarse computational grid obtained with these subgrid models are compared with those using a standard drag model as well as experimental data obtained in a pilot-scale riser. Numerical predictions using both subgrid models showed higher solids holdup in the riser indicated by the radial solids density and axial pressure drop profiles in the 2D and 3D system geometries considered in this study. These subgrid models are demonstrated to be both needed and useful as large-scale numerical simulations commonly use coarse computational grids that are unable to resolve the smallest heterogeneous structures observed in the fluidization of small particles.

97 MATHEMATICS AND COMPUTING↗

Relating Convection to GCM Grid-Scale Fields Using Cloud-Resolving Model Simulation of a Squall Line Observed during MC3E Field Experiment

In this study, a WRF (Weather Research and Forecasting) model is used as a cloud-resolving model to simulate a squall line observed on 20 May 2011 in the Southern Great Plains (SGP) of the United States. The model output is then used to examine the relationships between convective precipitation and coarse-grained variables averaged over a range of subdomain sizes equivalent to various global climate model horizontal resolutions. The objective is to determine to what extent convection within the subdomains can be related to these “large-scale” variables, thus that they can potentially serve as closure in convective parameterization. Results show that convective precipitation is well correlated with the vertical velocity at 500 hPa, column integrated moisture convergence and CAPE change due to large-scale advective forcing (dCAPE) for various subdomain sizes, but the correlation decreases with decreasing subdomain size. dCAPE leads convective precipitation for all subdomain sizes examined; however, the lead time decreases with decreasing subdomain size. Moisture convergence leads convective precipitation for subdomain sizes greater than 32 km but has no lead time for smaller subdomain sizes. Mid-tropospheric vertical velocity has no lead time or slightly lags convective precipitation. The lead/lag composite analysis with respect to maximum precipitation time indicates that peaks of large-scale variables increase with decreasing subdomain size. The peaks of 500 hPa vertical velocity and column integrated moisture convergence occur at the same time as maximum precipitation, but maximum dCAPE leads maximum precipitation by twelve minutes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A Dual Spring Modeling Approach for Static and Fatigue Failure Assessments of Carbon/Epoxy Composite Sub-Elements

A dual spring model is developed for the static and fatigue damage predictions of laminates interface in composite structures. Stress concentrations can be induced by the defects formed in the fabrication or service process. A conventional S-N based fatigue damage model may not be accurate to predict the fatigue life of a structure with high stress concentration. With the dual spring model, static delamination failure can be simulated using springs of cohesive type material model while fatigue delamination development can be predicted using linear springs, where the crack driving force is computed based on virtual crack closure technique (VCCT). A Paris law type fatigue growth law with its mode mixity is applied for fatigue crack growth prediction. After verified using benchmark examples, including Double Cantilever Beam (DCB), End-Notched Flexure (ENF) and Mix-Mode Bending (MMB), the proposed dual spring model is applied in the static and fatigue damage prediction of NASA/Boeing sub-elements and UTC sub-elements.

Cui, Xiaodong↗

ELECTRON HEAT FLUX IN THE SOLAR WIND: ARE WE OBSERVING THE COLLISIONAL LIMIT IN THE 1 AU DATA?

Using statistically significant data at 1 AU, it has recently been shown (Bale et al.) that in the solar wind, when the Knudsen number K {sub T} (the ratio between the electron mean free path and the electron temperature scale height) drops below about 0.3, the electron heat flux q intensity rapidly approaches the classical collisional Spitzer-Härm limit. Using a fully kinetic model including the effect of Coulomb collisions and the expansion of the solar wind with heliocentric distance, we observe that the heat flux strength does indeed approach the collisional value for Knudsen numbers smaller than about 0.3 in very good agreement with the observations. However, closer inspection of the heat flux properties, such as its variation with the heliocentric distance and its dependence on the plasma parameters, shows that for Knudsen numbers between 0.02 and 0.3 the heat flux is not conveniently described by the Spitzer-Härm formula. We conclude that even though observations at 1 AU seem to indicate that the electron heat flux intensity approaches the collisional limit when the Knudsen drops below ∼0.3, the collisional limit is not a generally valid closure for a Knudsen larger than 0.01. Moreover, the good agreement between the heat flux from our model and the heat flux from solar wind measurements in the high-Knudsen number regime seems to indicate that the heat flux at 1 AU is not constrained by electromagnetic instabilities as both wave-particle and wave-wave interactions are neglected in our calculations.

79 ASTRONOMY AND ASTROPHYSICS↗

Numerical and Experimental Studies of Particle Settling in Real Fracture Geometries

In this study, proppant is a vital component of hydraulic stimulation operations, improving conductivity by maintaining fracture aperture. While correct placement is a necessary part of ensuring that proppant performs efficiently, the transport behavior of proppant in natural rock fractures is poorly understood. In particular, as companies pursue new propping strategies involving new types of proppant, more accurate models of proppant behavior are needed to help guide their deployment. A major difficulty with simulating reservoir-scale proppant behavior is that continuum models traditionally used to represent large-scale slurry behavior loose applicability in fracture geometries. Particle transport models are often based on representative volumes that are at the same scale or larger than fractures found in hydraulic fracturing operations, making them inappropriate for modeling these types of flows. In the absence of a first-principles approach, empirical closure relations are needed. However, even such empirical closure relationships are difficult to derive without an accurate understanding of proppant behavior on the particle level. Thus, there is a need for experiments and simulations capable of probing phenomena at the sub-fracture scale. In this paper, we present results from experimental and numerical studies investigating proppant behavior at the sub-fracture level, in particular, the role of particle dispersion during proppant settling. In the experimental study, three-dimensional printing techniques are used to accurately reproduce the topology of a fractured Marcellus shale sample inside a particle-flow cell.

15 GEOTHERMAL ENERGY↗

Drake passage and central american seaway controls on the distribution of the oceanic carbon reservoir

A coupled carbon/climate model is used to explore the impact of Drake Passage opening and Central American Seaway closure on the distribution of carbon in the global oceans. We find that gateway evolution likely played an important role in setting the modern day distribution of oceanic dissolved inorganic carbon (DIC), which is currently characterized by relatively low concentrations in the Atlantic ocean, and high concentrations in the Southern, Indian, and Pacific oceans. In agreement with previous studies, we find a closed Drake Passage in the presence of an open Central American Seaway results in suppressed Atlantic meridional overturning and enhanced southern hemispheric deep convection. Opening of the Drake Passage triggers Antarctic Circumpolar Current flow and a weak Atlantic meridional overturning circulation (AMOC). Subsequent Central American Seaway closure reinforces the AMOC while also stagnating equatorial Pacific subsurface waters. These gateway-derived oceanographic changes are reflected in large shifts to the global distribution of DIC. An initially closed Drake Passage results in high DIC concentrations in the Atlantic and Arctic oceans, and lower DIC concentrations in the Pacific/Indian/Southern oceans. Opening Drake Passage reverses this gradient by lowering mid-depth Atlantic and Arctic DIC concentrations and raising deep Pacific/Indian/Southern Ocean DIC concentrations. Central American Seaway closure further reinforces this trend through additional Atlantic mid-depth DIC decreases, as well as Pacific mid-depth DIC concentration increases, with the net effect being a transition to a modern distribution of oceanic DIC.

54 ENVIRONMENTAL SCIENCES↗

A review of pressure anisotropy caused by electron trapping in collisionless plasma, and its implications for magnetic reconnection

From spacecraft data, it is evident that electron pressure anisotropy develops in collisionless plasmas. This is in contrast to the results of theoretical investigations, which suggest this anisotropy should be limited. Common for such theoretical studies is that the effects of electron trapping are not included; simply speaking, electron trapping is a non-linear effect and is, therefore, eliminated when utilizing the standard methods for linearizing the underlying kinetic equations. Here, we review our recent work on the anisotropy that develops when retaining the effects of electron trapping. A general analytic model is derived for the electron guiding center distribution f(v{sub ∥},v{sub ⊥}) of an expanding flux tube. The model is consistent with anisotropic distributions observed by spacecraft, and is applied as a fluid closure yielding anisotropic equations of state for the parallel and perpendicular components (relative to the local magnetic field direction) of the electron pressure. In the context of reconnection, the new closure accounts for the strong pressure anisotropy that develops in the reconnection regions. It is shown that for generic reconnection in a collisionless plasma nearly all thermal electrons are trapped, and dominate the properties of the electron fluid. A new numerical code is developed implementing the anisotropic closure within the standard two-fluid framework. The code accurately reproduces the detailed structure of the reconnection region observed in fully kinetic simulations. These results emphasize the important role of pressure anisotropy for the reconnection process. In particular, for reconnection geometries characterized by small values of the normalized upstream electron pressure, β{sub e∞}, the pressure anisotropy becomes large with p{sub ∥}≫p{sub ⊥} and strong parallel electric fields develop in conjunction with this anisotropy. The parallel electric fields can be sustained over large spatial scales and, therefore, become important for electron acceleration.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

BEYOND MIXING-LENGTH THEORY: A STEP TOWARD 321D

We examine the physical basis for algorithms to replace mixing-length theory (MLT) in stellar evolutionary computations. Our 321D procedure is based on numerical solutions of the Navier–Stokes equations. These implicit large eddy simulations (ILES) are three-dimensional (3D), time-dependent, and turbulent, including the Kolmogorov cascade. We use the Reynolds-averaged Navier–Stokes (RANS) formulation to make concise the 3D simulation data, and use the 3D simulations to give closure for the RANS equations. We further analyze this data set with a simple analytical model, which is non-local and time-dependent, and which contains both MLT and the Lorenz convective roll as particular subsets of solutions. A characteristic length (the damping length) again emerges in the simulations; it is determined by an observed balance between (1) the large-scale driving, and (2) small-scale damping. The nature of mixing and convective boundaries is analyzed, including dynamic, thermal and compositional effects, and compared to a simple model. We find that (1) braking regions (boundary layers in which mixing occurs) automatically appear beyond the edges of convection as defined by the Schwarzschild criterion, (2) dynamic (non-local) terms imply a non-zero turbulent kinetic energy flux (unlike MLT), (3) the effects of composition gradients on flow can be comparable to thermal effects, and (4) convective boundaries in neutrino-cooled stages differ in nature from those in photon-cooled stages (different Péclet numbers). The algorithms are based upon ILES solutions to the Navier–Stokes equations, so that, unlike MLT, they do not require any calibration to astronomical systems in order to predict stellar properties. Implications for solar abundances, helioseismology, asteroseismology, nucleosynthesis yields, supernova progenitors and core collapse are indicated.

79 ASTRONOMY AND ASTROPHYSICS↗

Using excitation-energy dependent fission yields to identify key fissioning nuclei in r -process nucleosynthesis

The possibility that nucleosynthesis in neutron star mergers may reach fissioning nuclei introduces significant uncertainties in predicting the relative abundances of $r$-process material from such events. We evaluate the impact of using sets of fission yields given by the 2016 GEF code for spontaneous (sf), neutron-induced $((n, f))$, and $β$-delayed (βdf) fission processes which take into account the approximate initial excitation energy of the fissioning compound nucleus. We further explore energy-dependent fission dynamics in the $r$ process by considering the sensitivity of our results to the treatment of the energy sharing and de-excitation of the fission fragments using the FREYA code. We show that the asymmetric-to-symmetric yield trends predicted by GEF 2016 can reproduce the high-mass edge of the second $r$-process peak seen in solar data and examine the sensitivity of this result to the mass model and astrophysical conditions applied. We consider the effect of fission yields and barrier heights on the nuclear heating rates used to predict kilonova light curves. We find that fission barriers influence the contribution of 254 Cf spontaneous fission to the heating at ~100 d, such that a light curve observation consistent with such late-time heating would both confirm that actinides were produced in the event and imply the fission barriers are relatively high along the 254 Cf β-feeding path. We lastly determine the key nuclei responsible for setting the r-process abundance pattern by averaging over thirty trajectories from a 1.2–1.4 M ⊙ neutron star merger simulation. Finally, we show it is largely the odd-N nuclei undergoing $(Z, N)(n, f)$ and $(Z, N)β$df that control the relative abundances near the second peak. We find the 'hot spots' for β-delayed and neutron-induced fission given all mass models considered and show most of these nuclei lie between the predicted $N$ = 184 shell closure and the location of currently available experimental decay data.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Upper limits for the existence of long-lived isotopes of roentgenium in natural gold

A sensitive search for isotopes of a superheavy element (SHE) in natural gold materials has been performed with accelerator mass spectrometry at the Vienna Environmental Research Accelerator, which is based on a 3-MV tandem accelerator. Because the most likely SHE in gold is roentgenium (Rg, Z = 111), the search concentrated on Rg isotopes. Two different mass regions were explored: (i) For the neutron-deficient isotopes {sup 261}Rg and {sup 265}Rg, abundance limits in gold of 3x10{sup -16} were reached (no events observed). This is in stark contrast to the findings of Marinov et al.[Int. J. Mod. Phys. E 18, 621 (2009)], who reported positive identification of these isotopes with inductively coupled plasma sector field mass spectrometry in the (1-10)x10{sup -10} abundance range. (ii) Theoretical models of SHEs predict a region of increased stability around the proton and neutron shell closures of Z = 114 and N = 184. We therefore investigated eight heavy Rg isotopes, {sup A}Rg, A = 289, 290, 291, 292, 293, 294, 295, and 296. For six isotopes no events were observed, setting limits also in the 10{sup -16} abundance range. For {sup 291}Rg and {sup 294}Rg we observed two and nine events, respectively, which results in an abundance in the 10{sup -15} range. However, pileup of a particularly strong background in these cases makes a positive identification as Rg isotopes--even after pileup correction--unlikely.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗