Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “aqueous processing”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,621 records · Page 90

Exploring dimethyl sulfide (DMS) oxidation and implications for global aerosol radiative forcing

Abstract. Aerosol indirect radiative forcing (IRF), which characterizes how aerosols alter cloud formation and properties, is very sensitive to the preindustrial (PI) aerosol burden. Dimethyl sulfide (DMS), emitted from the ocean, is a dominant natural precursor of non-sea-salt sulfate in the PI and pristine present-day (PD) atmospheres. Here we revisit the atmospheric oxidation chemistry of DMS, particularly under pristine conditions, and its impact on aerosol IRF. Based on previous laboratory studies, we expand the simplified DMS oxidation scheme used in the Community Atmospheric Model version 6 with chemistry (CAM6-chem) to capture the OH-addition pathway and the H-abstraction pathway and the associated isomerization branch. These additional oxidation channels of DMS produce several stable intermediate compounds, e.g., methanesulfonic acid (MSA) and hydroperoxymethyl thioformate (HPMTF), delay the formation of sulfate, and, hence, alter the spatial distribution of sulfate aerosol and radiative impacts. The expanded scheme improves the agreement between modeled and observed concentrations of DMS, MSA, HPMTF, and sulfate over most marine regions, based on the NASA Atmospheric Tomography (ATom), the Aerosol and Cloud Experiments in the Eastern North Atlantic (ACE-ENA), and the Variability of the American Monsoon Systems (VAMOS) Ocean-Cloud-Atmosphere-Land Study Regional Experiment (VOCALS-REx) measurements. We find that the global HPMTF burden and the burden of sulfate produced from DMS oxidation are relatively insensitive to the assumed isomerization rate, but the burden of HPMTF is very sensitive to a potential additional cloud loss. We find that global sulfate burden under PI and PD emissions increase to 412 Gg S (+29 %) and 582 Gg S (+8.8 %), respectively, compared to the standard simplified DMS oxidation scheme. The resulting annual mean global PD direct radiative effect of DMS-derived sulfate alone is −0.11 W m−2. The enhanced PI sulfate produced via the gas-phase chemistry updates alone dampens the aerosol IRF as anticipated (−2.2 W m−2 in standard versus −1.7 W m−2, with updated gas-phase chemistry). However, high clouds in the tropics and low clouds in the Southern Ocean appear particularly sensitive to the additional aqueous-phase pathways, counteracting this change (−2.3 W m−2). This study confirms the sensitivity of aerosol IRF to the PI aerosol loading and the need to better understand the processes controlling aerosol formation in the PI atmosphere and the cloud response to these changes.

54 ENVIRONMENTAL SCIENCES↗

Pilot-Scale Studies of Lignin-Derived Ionic Liquids for Biomass Pretreatment

The polymers found in plant cell walls represent the largest reserves of renewable carbon on Earth - it has been estimated that the United States has approximately 1.3 billion tons of plant biomass available per year. Ionic liquids (ILs) are salts with melting points less than 100oC, typically containing organic cations, that possess a wide range of extraordinary properties as compared to traditional organic solvents. The unusual catalytic and solvation properties of ionic liquids have attracted the biofuel and biomass communities because IL-pretreatment provides higher fermentable sugar yields than those obtained by acid- or alkali-pretreatment under similar severities. This research used lignin, a major by-product of the biofuel and pulping industries, as raw material for IL synthesis. The goal is to lower the cost of IL production, and enable a more "closed-loop" biorefinery. The lignin is oxidatively depolymerized, purified, and used to prepare a new class of renewable ILs. Biomass pretreatment was the target application for the lignin-derived ILs, while we continue to investigate additional applications within the growing IL market - process chemistry, biotechnology and materials recycling. When comparing our corn stover pretreatment data to recently published reports, we have shown comparable glucose and xylose yields by using neat and 10% aqueous solutions of lignin-derived ILs.

09 BIOMASS FUELS↗

Protonation Dynamics of Confined Ethanol–Water Mixtures in H-ZSM-5 from Machine Learning-Driven Metadynamics

Zeolites are indispensable heterogeneous catalysts in industrial chemical processes, valued for their strong Brønsted acidity, well-defined microporous frameworks, and tunable pore structures. Their catalytic activity arises primarily from Brønsted acid sites (BAS), typically present as bridging hydroxyl groups (Si–OH–Al). Under aqueous reaction conditions, these protons interact dynamically with water and alcohol molecules, leading to complex solvation and protonation behavior within confined pores. In this study, we investigate the protonation equilibrium occurring between ethanol and water at the BAS of acidic zeolites under varying hydration levels, i.e., C2H5OH–(H2O)n, n=1–4. Local structure was analyzed through an adaptive-learning global optimization algorithm, while enhanced sampling molecular dynamics simulations with Well-Tempered Metadynamics (WMetaD) and machine learning interatomic potentials (MLPs) provide free-energy surfaces (FES) at variable hydration levels. The results reveal a strong dependence of proton localization on the degree of hydration. At low hydration (1 water molecule), the proton resides predominantly on ethanol; with 2 water molecules, it shifts toward water, and at higher hydration (3 or more water molecules), it becomes extensively delocalized over the water cluster. These findings underscore the critical role of solvation in modulating acid site behavior and suggest that a minimum of three water molecules is necessary to fully stabilize the proton on water within the zeolite framework. This solvation threshold has significant implications for catalytic processes, particularly in biomass conversion reactions where alcohol protonation is a key step in dehydration mechanisms.

machine learning↗

Bench-Scale Evaluation of Hydrothermal Processing Technology for Conversion of Wastewater Solids to Fuels

Hydrothermal Liquefaction (HTL) and Catalytic Hydrothermal Gasification (CHG) proof-of-concept bench-scale tests were performed to assess the potential of hydrothermal treatment for handling municipal wastewater sludge. HTL tests were conducted at 300-350°C and 20 MPa on three different feeds: primary sludge, secondary sludge, and digested solids. Corresponding CHG tests were conducted at 350°C and 20 MPa on the HTL aqueous phase output using a ruthenium based catalyst. Biocrude yields ranged from 25-37%. Biocrude composition and quality were comparable to biocrudes generated from algae feeds. Subsequent hydrotreating of biocrude resulted in a product with comparable physical and chemical properties to crude oil. CHG product gas methane yields on a carbon basis ranged from 47-64%. Siloxane concentrations in the CHG product gas were below engine limits. The HTL-CHG process resulted in a chemical oxygen demand (COD) reduction of > 99.9% and a reduction in residual solids for disposal of 94-99%.

biocrude↗

The Mechanical Properties of Chitosan Fibers Obtained in Different Spinning Conditions by Coagulation Method

The chitosan fibers have been obtained by coagulation method from an aqueous solution of 2% acetic acid into an ethanol–alkaline mixture. The influence of the chitosan molecular mass, the polymer solution feed rate, and the stretching ratio on the mechanical properties of the obtained filaments has been investigated. It is found that the viscosity of the chitosan solution depends on the chitosan molecular mass: with increasing molecular mass, the viscosity of the solution increases and, hence, the concentration of chitosan in the solution required for processing decreases. The optimal parameters of the spinning process have been determined. Polyfilament fibers with different diameters of elementary filaments and their number have been obtained.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Machinability of a Stainless Steel by Electrochemical Discharge Microdrilling

Due to the chemical elements included in their structure for ensuring an increased resistance to the environment action, the stainless steels are characterized by a low machinability when classical machining methods are applied. For this reason, sometimes non-traditional machining methods are applied, one of these being the electrochemical discharge machining. To obtain microholes and to evaluate the machinability by electrochemical discharge microdrilling, test pieces of stainless steel were used for experimental research. The electrolyte was an aqueous solution of sodium silicate with different densities. A complete factorial plan was designed to highlight the influence of some input variables on the sizes of the considered machinability indexes (electrode tool wear, material removal rate, depth of the machined hole). By mathematically processing of experimental data, empirical functions were established both for stainless steel and carbon steel. Graphical representations were used to obtain more suggestive vision concerning the influence exerted by the considered input variables on the size of the machinability indexes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Photodegradation of aniline by goethite doped with boron under ultraviolet and visible light irradiation

Highlights: {yields} Goethite modified by boron was prepared by sol-gel method in presence of boron acid at the low temperature. {yields} B-goethite has slight red shift in the band gap transition beside their stronger light absorption compared with pristine goethite. {yields} The results showed that semiconductor photocatalytic reaction mechanism should exist in the process of aniline degradation with goethite and B-goethite as photocatalyst. -- Abstract: In the present study, goethite and goethite doped with boron (B-goethite) were employed to detect the presence or absence of semiconductor photocatalytic reaction mechanism in the reaction systems. B-goethite was prepared by sol-gel method in presence of boron acid in order to improve its photocatalystic efficiency under the ultraviolet and visible light irradiation. The optical properties of goethite and B-goethite were characterized by ultraviolet and visible absorption spectra and the result indicated that B-goethite has slight red shift in the band gap transition beside their stronger light absorption compared with pristine goethite. Degradation of aniline was investigated in presence of goethite and B-goethite in aqueous solution. It was found that the B-goethite photocatalyst exhibited enhanced ultraviolet and visible light photocatalytic activity in degradation of aniline compared with the pristine goethite. The photocatalytic degradation mechanism of B-goethite was discussed.

36 MATERIALS SCIENCE↗

Numerical simulation experiments on the long-term evolution of a CO2 plume under a sloping caprock

We have used the TOUGH2-MP/ECO2N code to perform numerical simulation studies of the long-term behavior of CO{sub 2} stored in an aquifer with a sloping caprock. This problem is of great practical interest, and is very challenging due to the importance of multi-scale processes. We find that the mechanism of plume advance is different from what is seen in a forced immiscible displacement, such as gas injection into a water-saturated medium. Instead of pushing the water forward, the plume advances because the vertical pressure gradients within the plume are smaller than hydrostatic, causing the water column to collapse at the plume tip. Gas saturations and updip CO{sub 2} fluxes are nearly constant, independent of time and position, in the upper, mobile portions of the plume. The CO{sub 2} plume becomes thinner as it advances, yet the speed of advancement remains constant over the entire simulation period of up to 400 years, with migration distances of more than 80 km. Our simulation includes dissolution of CO{sub 2} into the aqueous phase and associated density increase, and molecular diffusion. However, no convection develops in the aqueous phase because it is suppressed by the relatively coarse (sub-)horizontal gridding required in a regional-scale model. A first crude sub-grid-scale model was implemented to represent convective enhancement of CO{sub 2} dissolution. This process is found to greatly reduce the thickness of the CO{sub 2} plume, but does not affect the speed of plume advancement.

54 ENVIRONMENTAL SCIENCES↗

Iron mobilization in North African dust.

Iron is an essential nutrient for phytoplankton. Although iron-containing dust mobilized from arid regions supplies the majority of the iron to the oceans, the key flux in terms of the biogeochemical response to atmospheric deposition is the amount of soluble or bioavailable iron. Atmospheric processing of mineral aerosols by anthropogenic pollutants (e.g. sulfuric acid) may transform insoluble iron into soluble forms. Previous studies have suggested higher iron solubility in smaller particles, as they are subject to more thorough atmospheric processing due to a longer residence time than coarse particles. On the other hand, the specific mineralogy of iron in dust may also influence the particulate iron solubility in size. Compared to mineral dust aerosols, iron from combustion sources could be more soluble, and found more frequently in smaller particles. Internal mixing of alkaline dust with iron-containing minerals could significantly reduce iron dissolution in large dust aerosols due to the buffering effect, which may, in contrast, yield higher solubility in smaller particles externally mixed with alkaline dust (Ito and Feng, 2010). Here, we extend the modeling study of Ito and Feng (2010) to investigate atmospheric processing of mineral aerosols from African dust. In contrast to Asian dust, we used a slower dissolution rate for African dust in the fine mode. We compare simulated fractional iron solubility with observations. The inclusion of alkaline compounds in aqueous chemistry substantially limits the iron dissolution during long-range transport to the Atlantic Ocean: only a small fraction of iron (<0.2%) dissolves from illite in coarsemode dust aerosols with 0.45% soluble iron initially. In contrast, a significant fraction (1-1.5%) dissolves in fine-mode dust aerosols due to the acid mobilization of the iron-containing minerals externally mixed with carbonate minerals. Consequently, the model generally reproduces higher iron solubility in smaller particles as suggested by measurements over the Atlantic Ocean. Our results imply that the dissolution of iron in African dust is generally slower than that in Asian dust. Conventionally, dust is assumed as the major supply of bioavailable iron with a constant solubility at 1-2% to the remote ocean. Therefore, the timing and location of the atmospheric iron input to the ocean with detailed modeling of atmospheric processing could be different from those previously assumed. Past and future changes in aerosol supply of bioavailable iron might play a greater role in the nutrient supply for phytoplankton production in the upper ocean, as global warming has been predicted to intensify stratification and reduce vertical mixing from the deep ocean. Thus the feedback of climate change through ocean uptake of carbon dioxide as well as via aerosol-cloud interaction might be modified by the inclusion of iron chemistry in the atmosphere.

54 ENVIRONMENTAL SCIENCES↗

Cold-cap formation from a slurry feed during nuclear waste vitrification

The time-temperature history of waste slurry feed during melting strongly affects various kinetic processes, such as reaction or dissolution rates, and, consequently, the melting rate. To analyze the time-temperature history of the feed in a cold-cap during nuclear waste vitrification, this work focuses on understanding how the main coldcap body forms, how the aqueous feed slurry interacts with the cold-cap, and estimating the cold-cap heat conductivity. To simulate the conditions during cold-cap formation, samples were prepared by rapid water evaporation from slurry feed. After water evaporated from the sample, a fresh slurry with tracer was poured onto the dry sample. X-ray fluorescence was then used to investigate the degree of penetration and/or mixing between the incoming slurry and the original sample. We show that the slurry does not interact or mix with the previously dry cold-cap crust, but that water-soluble components concentrate at the bottom of the boiling pools, where most of the water evaporates. Further, using the rate of water evaporation, the heat conductivity of the cold-cap was calculated from the measured temperature profile. The resulting conductivity is significantly higher than the values obtained in previous studies. We discuss the implications of the results for the cold-cap formation in the melter and for the development of the cold-cap mathematical model.

Hujova, Miroslava↗

New hybrid materials as Zn(II) sorbents in water samples

Mesoporous silicas have been chemically modified with 5-mercapto-1-methyltetrazole (MTTZ) obtaining hybrid materials denominated MTTZ-MSU-2 and MTTZ-HMS. These materials were employed as Zn(II) sorbents from aqueous media at room temperature. The effect of several variables (stirring time, pH, presence of other metals) has been studied using batch and column techniques. Flame atomic absorption spectrometry (FAAS) was used to determinate Zn(II) concentration in the filtrate or in the eluted solution after the adsorption process. The results indicate that under pH 8, the maximum adsorption value was 0.94 {+-} 0.01 and 0.72 {+-} 0.01 mmol Zn(II)/g for MTTZ-MSU-2 and MTTZ-HMS, respectively. In tap water samples, a preconcentration factor of 200 was obtained. On the basis of these results, it can be concluded that it is possible to modify chemically MSU-2 and HMS with 5-mercapto-1-methyltetrazole and to use the resulting modified mesoporous silica as an effective adsorbent for Zn(II) in aqueous media.

36 MATERIALS SCIENCE↗

Enhanced photocatalytic degradation of phenol over Ag3PO4-BiOCl1−xBrx composites

Highlights: • Ag{sub 3}PO{sub 4}-BiOCl{sub 1−x}Br{sub x} composites were successfully synthesized and characterized. • The band energy of composites can be tunable by solid-solution strategy. • Appropriate band-gap structure facilitates charge separation property and light absorption. - Abstract: In this paper, a series of Ag{sub 3}PO{sub 4}-BiOCl{sub 1−x}Br{sub x} composites with adjustable band gap has been fabricated by using a facile two-step synthetic method. The photocatalytic activity of Ag{sub 3}PO{sub 4}-BiOCl{sub 1−x}Br{sub x} was evaluated by photocatalytic decomposition of phenol aqueous solution under simulated solar light irradiation. The result shows that Ag{sub 3}PO{sub 4}-BiOCl{sub 0.75}Br{sub 0.25} (1:5) composite possesses the best photocatalytic activity among all the as-prepared samples. The photocatalytic activity of Ag{sub 3}PO{sub 4}-BiOCl can be enhanced mainly owing to the strong light absorption ability by loading Ag{sub 3}PO{sub 4} on the surface of BiOCl, while the photocatalytic activities of Ag{sub 3}PO{sub 4}-BiOCl{sub 1−x}Br{sub x} (x = 0.25, 0.5, 0.75 and 1) composites could be enhanced by restraining the recombination of photo-generated electron-hole pairs. The enhanced solar-light photocatalytic activities of Ag{sub 3}PO{sub 4}-BiOCl{sub 1−x}Br{sub x} composites could be ascribed to the adjustable energy band structure, which facilitates the separation of photoinduced carriers. In addition, superoxide radicals (O{sub 2}{sup −}), holes (h{sup +}) and OH are considered to dominate the photocatalytic degration process. Moreover, a possible mechanism of deep understanding on the base of experimental results was proposed.

36 MATERIALS SCIENCE↗

Quantitatively controlled electrophoretic deposition of nanocrystal films from non-aqueous suspensions

This study presents a novel method to correlate the mass and charge transfer kinetics during the electrophoretic deposition of nanocrystal films by using a purpose-built double quartz crystal microbalance combined with simultaneous current-measurement. Our data support a multistep process for film formation: generation of charged nanocrystal flux, charge transfer at the electrode, and polarization of neutral nanocrystals near the electrode surface. The polarized particles are then subject to dielectrophoretic forces that reduce diffusion away from the interface, generating a sufficiently high neutral particle concentration at the interface to form a film. The correlation of mass and charge transfer enables quantification of the nanocrystal charge, the fraction of charged nanocrystals, and the initial sticking coefficient of the particles. These quantities permit calculation of the film thickness, providing a theoretical basis for using concentration and voltage as process parameters to grow films of targeted thicknesses.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Hard x-ray phase contrast imaging of black lipid membranes

We report hard x-ray phase contrast imaging of black lipid membranes, freely suspended over a micromachined aperture in an aqueous solution. Biomolecular and organic substances can thus be probed in hydrated environments by parallel beam propagation imaging, using coherent multi-kilo-electronvolt x-ray radiation. The width of the thinning film can be resolved from analysis of the intensity fringes in the Fresnel diffraction regime down to about 200 nm. The thinning process, in which solvent is expelled from the space in between two opposing monolayers, is monitored, and the domain walls between coexisting domains of swollen and thinned membrane patches are characterized.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Controlling Proton Delivery with Catalyst Structural Dynamics

The fastest synthetic molecular catalysts for production and oxidation of H2 emulate components of the active site of natural hydrogenases. The role of controlled structural dynamics is recognized as a critical component in the catalytic performance of many enzymes, including hydrogenases, but is largely neglected in the design of synthetic molecular cata-lysts. In this work, the impact of controlling structural dynamics on the rate of production of H2 was studied for a series of [Ni(PPh2NC6H4-R2)2]2+ catalysts including R = n-hexyl, n-decyl, n-tetradecyl, n-octadecyl, phenyl, or cyclohexyl. A strong correlation was observed between the ligand structural dynamics and the rates of electrocatalytic hydrogen production in acetonitrile, acetonitrile-water, and protic ionic liquid-water mixtures. Specifically, the turnover frequencies correlate inversely with the rates of ring inversion of the amine-containing ligand, as this dynamic process dictates the positioning of the proton relay in the second coordination sphere and therefore governs protonation at either catalytically productive or non-productive sites. This study demonstrates that the dynamic processes involved in proton delivery can be controlled through modifications of the outer coordination sphere of the catalyst, similar to the role of the protein architecture in many enzymes. The present work provides new mechanistic insight into the large rate enhancements observed in aqueous protic ionic liquid media for the [Ni(PPh2NR2)]2+ family of catalysts. The incorporation of controlled structural dynamics as a design parameter to modulate proton delivery in molecular catalysts has enabled H2 production rates that are up to three orders of magnitude faster than the [Ni(PPh2NPh2)]2+complex. The observed turnover frequencies are up to 106 s-1 in acetonitrile-water, and over 107 s-1 in protic ionic liquid-water mixtures, with a minimal increase in overpotential. This material is based upon work supported as part of the Center for Molecular Electrocatalysis, an Energy Frontier Research Center funded by the U.S. Department of Energy, Office of Science, Office of Basic Energy Sciences, and was performed in part using the Molecular Science Computing Facility (MSCF) in the William R. Wiley Environmental Molecular Sciences Laboratory, a DOE national scientific user facility located at Pacific Northwest National Laboratory (PNNL). PNNL is operated by Battelle for DOE.

electrocatalysis, structural dynamics↗

Photocatalytic degradation of methyl orange dye in water solutions in the presence of MWCNT/TiO{sub 2} composites

Highlights: ► MWCNTs/TiO{sub 2} composites were obtained to degrade organic dyes in water. ► MWCNT/TiO{sub 2} composites were analyzed by photocatalysis and structural characterization. ► The photocatalytic shows efficient method for the degradation of dyes from aqueous effluents. - Abstract: The textile and dyestuff industries are the primary sources of the release of synthetic dyes into the environment and usually there are major pollutants in dye wastewaters. Because of their toxicity and slow degradation, these dyes are categorized as environmentally hazardous materials. In this context, carbon nanotubes/TiO{sub 2} (CNTs/TiO{sub 2}) composites were prepared using multi-walled CNTs (MWCNTs), titanium (IV) propoxide and commercial TiO{sub 2} (P25{sup ®}) as titanium oxide sources, to degrade the methyl orange dye in solution through photocatalyst activity using UV irradiation. The composites were prepared by solution processing followed by thermal treatment at 400, 500 and 600 °C. The heterojunction between nanotubes and TiO{sub 2} was confirmed by XRD, specific surface area. The coating morphology was observed with SEM and TEM.

36 MATERIALS SCIENCE↗

A Materials Perspective on Direct Recycling of Lithium-Ion Batteries: Principles, Challenges and Opportunities

As the dominant means of energy storage technology today, the widespread deployment of lithium-ion batteries (LIBs) would inevitably generate countless spent batteries at their end of life. From the perspectives of environmental protection and resource sustainability, recycling is a necessary strategy to manage end-of-life LIBs. Compared with traditional hydrometallurgical and pyrometallurgical recycling methods, the emerging direct recycling technology, rejuvenating spent electrode materials via a non-destructive way, has attracted rising attention due to its energy efficient processes along with increased economic return and reduced CO 2 footprint. This review investigates the state-of-the-art direct recycling technologies based on effective relithiation through solid-state, aqueous, eutectic solution and ionic liquid mediums and thoroughly discusses the underlying regeneration mechanism of each method regarding different battery chemistries. It is concluded that direct regeneration can be a more energy-efficient, cost-effective, and sustainable way to recycle spent LIBs compared with traditional approaches. Additionally, it is also identified that the direct recycling technology is still in its infancy with several fundamental and technological hurdles such as efficient separation, binder removal and electrolyte recovery. Finally, in addressing these remaining challenges, this review proposes an outlook on potential technical avenues to accelerate the development of direct recycling toward industrial applications.

25 ENERGY STORAGE↗