Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “VERIFICATION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,621 records · Page 90
All sourcesNASA NTRSDOE OSTI
NASA NTRS1975

Experimental verification of film-cooling concepts on a turbine vane

An investigation was conducted to verify some film cooling concepts applied to gas turbine vanes. The film cooling air was ejected from a single row of holes on the convex surface and a double row of holes of the concave surface. Tests were conducted at a gas temperature of 1260 K, a gas pressure of 3 atmospheres, and a coolant temperature of 280 K. Mass-velocity ratios were varied between 0 and 2.0. Data were taken without film-cooling holes, with film-cooling holes but without blowing, and with blowing. A small amount of blowing into a nonturbulent boundary layer caused an increase in vane temperatures. Film cooling when combined with convection cooling was verified to be more effective than either film or convective cooling alone.

Gladden, H. J.↗
NASA NTRS1976

Wind estimates from cloud motions - Phase 1 of an in situ aircraft verification experiment

An initial experiment has been conducted to verify geostationary-satellite-derived cloud motion wind estimates with in situ aircraft wind velocity measurements. Case histories of 1/2 to 2 h were obtained for 3-10 km diameter cumulus cloud systems on 6 days. Also, one cirrus cloud case was obtained. In most cases the clouds were discrete enough that both the cloud motion and the ambient wind could be measured with the same aircraft Inertial Navigation System (INS). Since the INS drift error is the same for both the cloud motion and wind measurements, the drift error drops out of the relative motion determinations. The magnitude of the vector difference between the cloud motion and the ambient wind at the cloud base averaged 1.2 m/sec. The wind vector at higher levels in the cloud layer differed by about 3 to 5 m/sec from the cloud motion vector.

Hasler, A. F.↗
NASA NTRS1976

Verification of the principle of equivalence for massive bodies

Analysis of 1389 measurements, accumulated between 1970 and 1974, of echo delays of laser signals transmitted from earth and reflected from cube corners on the moon shows gravitational binding energy to contribute equally to earth's inertial and passive gravitational masses to within the estimated uncertainty of 1.5%. The corresponding restriction on the Eddington-Robertson parameters is 4(beta) - gamma 3 = -0.001 plus or minus 0.015. Combination with other results, as if independent, yields values for beta and gamma in accord with general relativity.

Shapiro, I. I.↗
NASA NTRS1976

Wind estimates from cloud motions - Preliminary results from phases I, II and III of an in situ aircraft verification experiment

The accuracy of wind estimates derived from cloud motion is under investigation. Aircraft measurements of the ambient wind field have been compared with simultaneous inertial navigation system descriptions of the extent and motion of 40 tropical cumulus and 5 cirrus clouds. Preliminary results indicate that cloud-motion wind estimates are sufficiently accurate to be used in sensitive divergence, vorticity, and vertical motion calculations. The magnitude of the vector difference between the cirrus cloud velocity and the mean wind of the cloud layer was found to be about 1.6 m/sec. The major source of error is thought to be in determination of the position of the cloud. In the case of cumulus clouds, the magnitude of the vector difference between the aircraft-measured cloud motion and the cloud-base wind is less than 1.3 m/sec.

Hasler, A. F.↗
NASA NTRS1976

Construction and verification of a model of passenger response to STOL aircraft characteristics

A technique for evaluating passenger acceptance of a transportation system's environment has been developed. This includes a model of passenger reaction to the vehicle, as well as the relative satisfaction compared to other system attributes. The technique is applied to two commercial airline operations - a U.S. commuter, and the Canadian Airtransit STOL system. It is demonstrated that system convenience and aircraft interior seating can play a large role in satisfying the passenger.

Jacobson, I. D.↗
NASA NTRS1976

Structural analyses for the modification and verification of the Viking aeroshell

The Viking aeroshell is an extremely lightweight flexible shell structure that has undergone thorough buckling analyses in the course of its development. The analytical tools and modeling technique required to reveal the structural behavior are presented. Significant results are given which illustrate the complex failure modes not usually observed in simple models and analyses. Both shell-of-revolution analysis for the pressure loads and thermal loads during entry and a general shell analysis for concentrated tank loads during launch were used. In many cases fixes or alterations to the structure were required, and the role of the analytical results in determining these modifications is indicated.

Stephens, W. B.↗
NASA NTRS1976

Results of a carrier aircraft (model AX13191-4) verification test in the Boeing transonic wind tunnel using a 0.03-scale 747 CAM/orbiter model 45-0 (CA6), volume 1

Force and moment data were obtained on each vehicle both mated and separated. The investigation included the effects of orbiter incidence, orbiter tail cone, orbiter strut fairings, elevon, and body flap settings. Analysis of the data indicated the 747 is suitable as a carrier of the orbiter in both the ALT launch and ferry mode. The effect of configuration changes on drag and stability was determined.

Source record↗
NASA NTRS1977

Boundary layer integral matrix procedure: Verification of models

The three turbulent models currently available in the JANNAF version of the Aerotherm Boundary Layer Integral Matrix Procedure (BLIMP-J) code were studied. The BLIMP-J program is the standard prediction method for boundary layer effects in liquid rocket engine thrust chambers. Experimental data from flow fields with large edge-to-wall temperature ratios are compared to the predictions of the three turbulence models contained in BLIMP-J. In addition, test conditions necessary to generate additional data on a flat plate or in a nozzle are given. It is concluded that the Cebeci-Smith turbulence model be the recommended model for the prediction of boundary layer effects in liquid rocket engines. In addition, the effects of homogeneous chemical reaction kinetics were examined for a hydrogen/oxygen system. Results show that for most flows, kinetics are probably only significant for stoichiometric mixture ratios.

Bonnett, W. S.↗
NASA NTRS1977

Model verification of large structural systems

A methodology was formulated, and a general computer code implemented for processing sinusoidal vibration test data to simultaneously make adjustments to a prior mathematical model of a large structural system, and resolve measured response data to obtain a set of orthogonal modes representative of the test model. The derivation of estimator equations is shown along with example problems. A method for improving the prior analytic model is included.

Lee, L. T.↗
NASA NTRS1977

Development and verification of real-time, hybrid computer simulation of F100-PW-100(3) turbofan engine

A real time, hybrid computer simulation of a turbofan engine is described. Controls research programs involving that engine are supported by the simulation. The real time simulation is shown to match the steady state and transient performance of the engine over a wide range of flight conditions and power settings. The simulation equations, FORTRAN listing, and analog patching diagrams are included.

Szuch, J. R.↗
NASA NTRS1977

Verification by Viking landers of earlier radio occultation measurements of surface atmospheric pressure on Mars

The landing of Viking 1 in Chryse Planitia on July 20, 1976 provided the first opportunity to obtain measurements of atmospheric pressure directly from the surface of Mars. A computation was conducted to predict the atmospheric pressure at the landing site before the landing itself. The relative altitude between occultation points and the Viking 1 site was obtained with the aid of earth-based planetary radar data taken in 1967. The data cover Martian latitudes from 19 deg N to 24 deg N. The investigation indicates that the radio occultation results from Mariner 9 closely correspond to the actual surface pressure on Mars.

Kliore, A. J.↗
NASA NTRS1977

Experimental verification of the technique for measurement of ablation on the GASJET nose tip

The GASJET nose tip is proposed to reduce the erosion at the apex of a missile nose flying at hypersonic speeds through a rain storm as it reenters the atmosphere. A forward facing sonic jet is directed through the tip introducing a secondary counter-flow which displaces the bow shock and blankets the tip with a protective layer of relatively cool gas. Wind tunnel experiments are described which proved the validity of measuring nose recession in flight by recording the pressure in the blast tube supplying the GASJET.

Donohoe, J. C.↗
NASA NTRS1977

Wind estimates from cloud motions - Results from Phases I, II and III of an in situ aircraft verification experiment

An experiment is in progress to verify geostationary-satellite-derived cloud-motion wind estimates by in-situ aircraft wind-velocity measurements. One or more low-level aircraft equipped with Inertial Navigation Systems (INS) were used to define the vertical extent and horizontal motion of a cloud and to measure the ambient wind field. A high-level aircraft, also equipped with an INS, took photographs to describe the horizontal extent of the cloud field and to measure cloud motion. To date the experiment has been conducted over tropical oceans and in the western Gulf of Mexico. A total of 60 h have been spent tracking some 40 tropical cumulus and five cirrus clouds. Results for tropical cumulus clouds indicate excellent agreement between the cloud motion and the wind at cloud base. The magnitude of the vector difference between the cloud motion and the cloud-base wind is less than 1.3 m/s for 67% of the cases with track lengths of 1 h or longer. Similarly, the vector differences between the cloud motion and the wind at sub-cloud (150 m), mid-cloud, and cloud-top levels are 1.5, 3.6 and 7.0 m/s, respectively. The cirrus cloud motions agreed best with the mean wind in the cloud layer with a vector difference of about 1.6 m/s.

Hasler, A. F.↗
NASA NTRS1978

Verification of redundancy management design

Statistical method checks designs by simulating system operating conditions and adding error factors. Method has potential applicability to commercial and industrial situations where redundancy management system is used to detect and isolate failed components.

Gelderloos, H. C.↗