Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Trajectory analysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,621 records · Page 90
All sourcesNASA NTRSDOE OSTI
NASA NTRS1986

Titan Probe navigation analysis

In the proposed Cassini mission, a combined Saturn Orbiter/Titan Probe spacecraft will be launched from the Space Shuttle to arrive at Saturn around 2002, by means of a delta-VEGA trajectory. After Saturn-orbit insertion and a pericrone raise maneuver, the probe will be released to enter the Titan atmosphere and impact onto its surface. During its descent phase and impact onto Titan, the probe will maintain radio contact with the orbiter. Since the Titan-probe experimental phase lasts for only about four hours, probe-orbiter geometry and probe-delivery accuracy are critical to successful completion of this part of the mission. From a preliminary navigation analysis for probe delivery accuracy, it seems feasible to deliver the probe within 50 km (1-sigma value) of the desired aim-point in the Titan B-plane. The covariance study, however, clearly indicates the need for optical data, in addition to radio metric data. A Monte Carlo study indicates that a Delta-V capability of 98 m/sec for trajectory correction maneuvers will be sufficient to cover 99 percent of all contingencies during the segment from Saturn-orbit insertion to Titan-probe release.

Vijayaraghavan, A.↗
NASA NTRS1998

1-D Numerical Analysis of RBCC Engine Performance

An RBCC engine combines air breathing and rocket engines into a single engine to increase the specific impulse over an entire flight trajectory. Considerable research pertaining to RBCC propulsion was performed during the 1960's and these engines were revisited recently as a candidate propulsion system for either a single-stage-to-orbit (SSTO) or two-stage-to-orbit (TSTO) launch vehicle. There are a variety of RBCC configurations that had been evaluated and new designs are currently under development. However, the basic configuration of all RBCC systems is built around the ejector scramjet engine originally developed for the hypersonic airplane. In this configuration, a rocket engine plays as an ejector in the air-augmented initial acceleration mode, as a fuel injector in scramjet mode and the rocket in all rocket mode for orbital insertion. Computational fluid dynamics (CFD) is a useful tool for the analysis of complex transport processes in various components in RBCC propulsion systems. The objective of the present research was to develop a transient 1-D numerical model that could be used to predict flow behavior throughout a generic RBCC engine following a flight path.

Han, Samuel S.↗
NASA NTRSDate not supplied

LOFTID Aeroshell Thermal Response Uncertainty Analysis Utilizing the End-to-End Monte Carlo Approach

A probabilistic thermal margin process has been performed to design the flexible thermal protection system (FTPS) and select entry trajectory constraints given an acceptable risk level for the Low-Earth Orbit Flight Test of and Inflatable Decelerator (LOFTID) project. Uncertainties exist in atmospheric entry aeroheating environments and the predicted thermal response of thermal protection system (TPS) material. Entry vehicle TPS is often over-sized to mitigate uncertainty by combining conservative bounding scenarios together. The probabilistic thermal margin process allows engineers to make informed aeroshell design, flight design, and FTPS performance risk trades while preventing excessive FTPS margin from being applied. This paper describes the uncertainty analysis methodology used to carry out a probabilistic thermal margin process used for LOFTID’s aeroshell and explains how the calculated probability of exceeding flight allowable temperatures is used to design the FTPS and establish nominal flight design constraints. This probabilistic thermal margin process had never been applied to entry, decent, and landing design for a flown entry vehicle and it is one of the LOFTID project’s goals to demonstrate its merits.

Steven Andrew Tobin↗
NASA NTRS2015

The Orbital Design of Alpha Centauri Exoplanet Satellite (ACESat)

Exoplanet candidates discovered by Kepler are too distant for biomarkers to be detected with foreseeable technology. Alpha Centauri has high separation from other stars and is of close proximity to Earth, which makes the binary star system 'low hanging fruit' for scientists. Alpha Centauri Exoplanet Satellite (ACESat) is a mission proposed to Small Explorer Program (SMEX) that will use a coronagraph to search for an orbiting planet around one of the stars of Alpha Centauri. The trajectory design for this mission is presented here where three different trajectories are considered: Low Earth Orbit (LEO), Geosynchronous Orbit (GEO) and a Heliocentric Orbit. Uninterrupted stare time to Alpha Centauri is desirable for meeting science requirements, or an orbit that provides 90% stare time to the science target. The instrument thermal stability also has stringent requirements for proper function, influencing trajectory design.

Alpha Centauri↗
NASA NTRS2011

Time Domain Tool Validation Using ARES I-X Flight Data

The ARES I-X vehicle was launched from NASA's Kennedy Space Center (KSC) on October 28, 2009 at approximately 11:30 EDT. ARES I-X was the first test flight for NASA s ARES I launch vehicle, and it was the first non-Shuttle launch vehicle designed and flown by NASA since Saturn. The ARES I-X had a 4-segment solid rocket booster (SRB) first stage and a dummy upper stage (US) to emulate the properties of the ARES I US. During ARES I-X pre-flight modeling and analysis, six (6) independent time domain simulation tools were developed and cross validated. Each tool represents an independent implementation of a common set of models and parameters in a different simulation framework and architecture. Post flight data and reconstructed models provide the means to validate a subset of the simulations against actual flight data and to assess the accuracy of pre-flight dispersion analysis. Post flight data consists of telemetered Operational Flight Instrumentation (OFI) data primarily focused on flight computer outputs and sensor measurements as well as Best Estimated Trajectory (BET) data that estimates vehicle state information from all available measurement sources. While pre-flight models were found to provide a reasonable prediction of the vehicle flight, reconstructed models were generated to better represent and simulate the ARES I-X flight. Post flight reconstructed models include: SRB propulsion model, thrust vector bias models, mass properties, base aerodynamics, and Meteorological Estimated Trajectory (wind and atmospheric data). The result of the effort is a set of independently developed, high fidelity, time-domain simulation tools that have been cross validated and validated against flight data. This paper presents the process and results of high fidelity aerospace modeling, simulation, analysis and tool validation in the time domain.

Hough, Steven↗
NASA NTRS2004

Aerothermal Performance Constraint Analysis of Sharp Nosecaps and Leading Edges

The main objective of this work is to predict the Aerothermal Performance Constraint (APC) for a class of Crew Transfer Vehicles (CTV) with shap noses and wing leading edges made out of UHTC which is a family of Ultra High Temperature Ceramics materials developed at NASA Ames. The APC is based on the theoretical temperature limit of the material which is usually encountered at the CTV nose or wing leading edge. The APC places a lower limit on the trajectory of the CTV in the altitude velocity space. The APC is used as one of the constraints in developing reentry and abort trajectories for the CTV. The trajectories are then used to generate transient thermal response of the nosecaps and wing leading edges which are represented as either a one piece of UHTC or two piece (UHTC + RCC) with perfect axial contact. The final paper will include more details about the analysis procedure and will also include results for reentry and abort design trajectories.

Rizk, Yehia↗
NASA NTRS2007

General Mission Analysis Tool (GMAT) Architectural Specification. Draft

Early in 2002, Goddard Space Flight Center (GSFC) began to identify requirements for the flight dynamics software needed to fly upcoming missions that use formations of spacecraft to collect data. These requirements ranged from low level modeling features to large scale interoperability requirements. In 2003 we began work on a system designed to meet these requirement; this system is GMAT. The General Mission Analysis Tool (GMAT) is a general purpose flight dynamics modeling tool built on open source principles. The GMAT code is written in C++, and uses modern C++ constructs extensively. GMAT can be run through either a fully functional Graphical User Interface (GUI) or as a command line program with minimal user feedback. The system is built and runs on Microsoft Windows, Linux, and Macintosh OS X platforms. The GMAT GUI is written using wxWidgets, a cross platform library of components that streamlines the development and extension of the user interface Flight dynamics modeling is performed in GMAT by building components that represent the players in the analysis problem that is being modeled. These components interact through the sequential execution of instructions, embodied in the GMAT Mission Sequence. A typical Mission Sequence will model the trajectories of a set of spacecraft evolving over time, calculating relevant parameters during this propagation, and maneuvering individual spacecraft to maintain a set of mission constraints as established by the mission analyst. All of the elements used in GMAT for mission analysis can be viewed in the GMAT GUI or through a custom scripting language. Analysis problems modeled in GMAT are saved as script files, and these files can be read into GMAT. When a script is read into the GMAT GUI, the corresponding user interface elements are constructed in the GMAT GUI. The GMAT system was developed from the ground up to run in a platform agnostic environment. The source code compiles on numerous different platforms, and is regularly exercised running on Windows, Linux and Macintosh computers by the development and analysis teams working on the project. The system can be run using either a graphical user interface, written using the open source wxWidgets framework, or from a text console. The GMAT source code was written using open source tools. GSFC has released the code using the NASA open source license.

Hughes, Steven P.↗
NASA NTRS1981

Research analysis of Space Shuttle Orbiter entry aerothermodynamic flight data at the NASA Langley Research Center

The methods used to analyze the aerothermodynamic data gathered from the Shuttle protoflights are reviewed. Trajectory and atmospheric reconstruction allow an accurate definition of the freestream environment through which the Shuttle has flown. The reconstructions, combined with aerodynamic coefficient and convective heating rate determinations, provide predictive capability for comparison with future flights. Data are acquired by operational instrumentation (12,000 parameters), development flight instrumentation (4500 measurements), and Orbiter experiments instrumentation; tracking and meteorological data are also included in the analyses. The aerothermodynamic and aerodynamic technology base for large, winged, lifting body entry vehicles is being expanded by the analysis efforts. Sensor locations on the Shuttle and data management techniques are described.

Throckmorton, D. A.↗
NASA NTRS1972

Basic parameters for low thrust mission and system analysis.

Development of a basic set of normalized parameters to represent low-thrust system characteristics. The conditions which must be met to obtain trajectory and performance data which are invariant with the launch vehicle characteristics, the selected power, the specific mass of the low-thrust vehicle, and the efficiency of the ion propulsion system are derived. This normalized representation of mission characteristics frees the analyst from having to rerun the trajectories if any of the aforementioned parameters are varied. Examples pertaining to a low-thrust Jupiter flyby and comet Encke rendezvous are given to demonstrate the utility of the method of presentation.

Barber, T. A.↗
NASA NTRS1988

Simulation and analysis of image-based navigation system for rotorcraft low-altitude flight

The automation of helicopter NOE flight entails the modification of nominal trajectories on the basis of the detection and location of obstacles by means of onboard sensors. This process is presently studied using a sequence of images from a passive sensor mounted at the helicopter's center of gravity and oriented with the viewing axis along the rotorcraft's longitudinal body-axis. Three different Kalman filters are used to estimate the location of an object on the ground during the course of various simulated helicopter maneuvers; two of the three filters are found to yield good object location estimates.

Sridhar, Banavar↗
NASA NTRS1991

Error analysis of combined stereo/optical-flow passive ranging

The motion of an imaging sensor causes each imaged point of the scene to correspondingly describe a time trajectory on the image plane. The trajectories of all imaged points are reminiscent of a flow (e.g., of liquid) which is the source of the term 'optical flow'. Optical-flow ranging is a method by which the stream of two-dimensional images obtained from a forward-looking forward-moving passive sensor is used to compute depth (or range) to points in the field of view. Another well-known ranging method consists of triangulation based on stereo images obtained from at least two stationary sensors. In this paper we analyze the potential accuracies of a combined optical flow and stereo passive-ranging system in the context of helicopter nap-of-the-earth obstacle avoidance. The Cramer-Rao lower bound is developed for the combined system under the assumption of an unknown angular bias error common to both cameras of a stereo pair. It is shown that the depth accuracy degradations caused by a bias error is negligible for a combined optical-flow and stereo system as compared to a monocular optical-flow system.

Barniv, Yair↗
NASA NTRS2019

Orbit determination sensitivity analysis for th Europa Clipper Mission tour

This paper will assess the sensitivity of OD delivery and knowledge performance for the current Europa Mission trajectory through parametric variation of a baseline tour navigation strategy.2 Variations of several parameters are run, one at a time, to determine the impact on spacecraft ephemeris uncertainties at OD knowledge, delivery, and encounter reconstruction times. There are two basic categories of sensitivity runs considered: variations of tracking data type and amount, and variations to dynamic parameters. The results of these parameter and data variations are compared against the values necessary to achieve accurate instrument pointing and observation planning.

Young, Brian↗
NASA NTRS2018

Mission Design for the Exploration of Ice Giants, Kuiper Belt Objects and Their Moons Using Kilopower Electric Propulsion

The exploration of Ice Giants, Kuiper Belt Objects (KBOs) and their moons pose unique challenges from a mission design standpoint. NASA is currently developing a scalable 1-10 kilowatt electric class in-space fission reactor, known as Kilopower. The focus of this paper is to investigate the applicability of Kilopower Electric Propulsion to orbiting missions to Uranus, Neptune, and Pluto. This effort is broken into two pieces for each destination. First, a broad search of interplanetary trajectories with multiple gravity assists is completed to identify a range of mission opportunities from 2025 to 2045. Second, preliminary analysis is completed to understand the accessibility of various destination orbits, including elliptical orbits around the primary body and circular orbits around the largest moons. Results suggest that orbital missions to Uranus and Neptune are feasible with reasonable time of flight. Further work is necessary to achieve similar success with Pluto missions, but preliminary results are promising.

Uranus↗
NASA NTRS2001

An Assessment of the Ozone Loss During the 1999-2000 SOLVE Arctic Campaign

Ozone observations from ozonesondes, the lidars aboard the DC-8, in situ ozone measurements from the ER-2, and satellite ozone measurements from Polar Ozone and Aerosol Measurement III (POAM) were used to assess ozone loss during the Sage III Ozone Loss and Validation Experiment (SOLVE) 1999-2000 Arctic campaign. Two methods of analysis were used. In the first method a simple regression analysis is performed on the ozonesonde and POAM measurements within the vortex. In the second method, the ozone measurements from all available ozone data were injected into a free running diabatic trajectory model and carried forward in time from December 1 to March 15. Vortex ozone loss was then estimated by comparing the ozone values of those parcels initiated early in the campaign with those parcels injected later in the campaign. Despite the variety of observational techniques used during SOLVE, the measurements provide a fairly consistent picture. Over the whole vortex, the largest ozone loss occurs between 550 and 400 K potential temperatures (approximately 23-16 km) with over 1.5 ppmv lost by March 15, the end of the SOLVE mission period. An ozone loss rate of 0.04-0.05 ppmv/day was computed for March 15. Ozonesondes launched after March 15 suggest that an additional 0.5 ppmv or more ozone was lost between March 15 and April 1. The small disagreement between ozonesonde and POAM analysis of January ozone loss is found to be due to biases in vortex sampling. POAM makes most of its solar occultation measurements at the vortex edge during January 2000 which bias samples toward air parcels that have been exposed to sunlight and likely do experience ozone loss. Ozonesonde measurements and the trajectory technique use observations that are more distributed within the interior of the vortex. Thus the regression analysis of the POAM measurements tends to overestimate mid-winter vortex ozone loss. Finally, our loss calculations are broadly consistent with other loss computations using ER-2 tracer data and MLS satellite data, but we find no evidence for the 1992 high mid-January loss reported using the Match technique.

Schoeberl, Mark R.↗
DOE OSTI2024

Analysis and Grading of the Test Performance of PS Modules for the CMS Phase-2 Outer Tracker Upgrade

The Outer Tracker of the CMS experiment provides information about the trajectory of charged particles produced in proton-proton collisions at the LHC. During the High Luminosity LHC upgrade, scheduled for the late 2020s, the Outer Tracker will be replaced with new modules capable of transmitting data to the L1 Trigger. These modules are being assembled at several facilities around the world, including Fermilab, necessitating coordinated standards of module quality. Here I discuss the development of POTATO (Phase-2 Outer Tracker Analyzer of Test Outputs), a C++ software which provides a standardized procedure for analyzing and grading test results of the Outer Tracker modules. The particular focus of this poster is on the analysis and grading of the PS (pixel-strip) modules in POTATO.

Riggall, Caroline↗
NASA NTRS1976

Optimal reusable-tug and expendable-kickstage trajectories for high-energy planetary missions including correction for nodal precession

Equations are derived by using branched trajectory optimization techniques and the maximum principle to maximize the payload capability of a reusable tug/expendable kickstage vehicle configuration for planetary missions. The two stages and the payload are launched into a low earth orbit by a single space shuttle. The analysis includes correction for precession of the orbit. This correction is done by the tug. The tug propels the payload and the kickstage to an energy beyond earth escape and returns within a specified time to the precessed orbit. After separating from the tug, the kickstage accelerates the payload to the required injection conditions. Planetary injection conditions are specified by the mission energy and a fixed declination and right ascension of the outgoing asymptote. The multipoint boundary value problem resulting from the analysis is solved by a Newton-Raphson iteration technique. Partial derivatives of the boundary conditions are obtained by perturbing the initial conditions one at a time, integrating the trajectory and adjoint equations, and observing the changes in boundary conditions. Maximum payload capability is derived for two typical mission energies. In addition, the variations of several mission and stage parameters are also examined.

Borsody, J.↗
DOE OSTI2022

Running Primal-Dual Gradient Method for Time-Varying Nonconvex Problems

This paper focuses on a time-varying constrained nonconvex optimization problem, and considers the synthesis and analysis of online regularized primal-dual gradient methods to track a Karush-Kuhn-Tucker (KKT) trajectory. The proposed regularized primal-dual gradient method is implemented in a running fashion, in the sense that the underlying optimization problem changes during the execution of the algorithms. In order to study its performance, we first derive its continuous-time limit as a system of differential inclusions. We then study sufficient conditions for tracking a KKT trajectory, and also derive asymptotic bounds for the tracking error (as a function of the time-variability of a KKT trajectory). Further, we provide a set of sufficient conditions for the KKT trajectories not to bifurcate or merge, and also investigate the optimal choice of the parameters of the algorithm. Illustrative numerical results for a time-varying nonconvex problem are provided.

differential inclusion↗