Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “SUBSTRATES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,621 records · Page 90

Influence of substrate miscut angle on surface morphology and luminescence properties of AlGaN

The influence of substrate miscut on Al{sub 0.5}Ga{sub 0.5} N layers was investigated using cathodoluminescence (CL) hyperspectral imaging and secondary electron imaging in an environmental scanning electron microscope. The samples were also characterized using atomic force microscopy and high resolution X-ray diffraction. It was found that small changes in substrate miscut have a strong influence on the morphology and luminescence properties of the AlGaN layers. Two different types are resolved. For low miscut angle, a crack-free morphology consisting of randomly sized domains is observed, between which there are notable shifts in the AlGaN near band edge emission energy. For high miscut angle, a morphology with step bunches and compositional inhomogeneities along the step bunches, evidenced by an additional CL peak along the step bunches, are observed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Stimulated emission and optical gain in AlGaN heterostructures grown on bulk AlN substrates

Optical gain spectra for ∼250 nm stimulated emission were compared in three different AlGaN-based structures grown on single crystalline AlN substrates: a single AlGaN film, a double heterostructure (DH), and a Multiple Quantum Well (MQW) structure; respective threshold pumping power densities of 700, 250, and 150 kW/cm{sup 2} were observed. Above threshold, the emission was transverse-electric polarized and as narrow as 1.8 nm without a cavity. The DH and MQW structures showed gain values of 50–60 cm{sup −1} when pumped at 1 MW/cm{sup 2}. The results demonstrated the excellent optical quality of the AlGaN-based heterostructures grown on AlN substrates and their potential for realizing electrically pumped sub-280 nm laser diodes.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Note: Large area deposition of Rh single and Rh/W/Cu multilayer thin films on stainless steel substrate by pulsed laser deposition technique

Mirror like thin films of single layer Rh and multilayer Rh/W/Cu are deposited on highly polished 50 mm diameter stainless steel substrate by Pulsed Laser Deposition (PLD) technique for first mirror application in fusion reactors. For this, the conventional PLD technique has been modified by incorporating substrate rastering stage for large area deposition via PLD. Process optimization to achieve uniformity of deposition as estimated from fringe visibility and thickness is also discussed.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

The effects of the substrate surface roughness on graphene plasmons

We investigate the effects of variation in the gap size between mono-layer graphene and a substrate with a randomly rough surface on the linear response of graphene’s π electron bands within the approximation of Dirac fermions. We adopt the electrostatic Green’s function developed by Rahman and Maradudin [Phys. Rev. B 21, 2137–2143 (1980)] for the surface of a dielectric medium, which exhibits a Gaussian distributed height profile and combine it with the polarization function of graphene described as a zero-thickness planar layer at a fixed distance from the mean position of the substrate surface. We specifically consider the effects of a random gap size on the two-dimensional sheet plasmon mode in heavily doped graphene, both on its dispersion relation in the long-wavelength limit and its broadening due to Landau damping in the continuum of inter-band electron-hole excitations at shorter wavelengths.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Structural effects of field emission from GaN nanofilms on SiC substrates

GaN nanofilms (NFs) with different structures are grown on SiC substrates by pulsed laser deposition under different conditions. The synthesized GaN NFs are studied by X-ray diffraction, field-emission (FE) scanning electron microscopy, X-ray photoelectron spectroscopy, and atomic force microscopy. The GaN NFs are composed of diversified GaN nanoparticles with a diameter of 9–38 nm, thickness of 10–50 nm, and roughness of 0.22–13.03 nm. FE from the GaN NFs is structure dependent, which is explained by stress changing the band gap of the NFs. By structure modulation, the turn-on field of GaN NFs can be as low as 0.66 V/μm at a current density of 1 μA/cm{sup 2}, with a current density of up to 1.1 mA/cm{sup 2} at a field of 4.18 V/μm. Fowler-Nordheim curves of some samples contain multiple straight lines, which originate from the structural change and diversification of GaN nanoparticles under an applied field. Overall, our results suggest that GaN NFs with excellent FE properties can be prepared on SiC substrates, which provides a new route to fabricate high-efficiency FE nanodevices.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Enhanced photoacoustic detection using photonic crystal substrate

This paper demonstrates the enhanced photoacoustic sensing of surface-bound light absorbing molecules and metal nanoparticles using a one-dimensional photonic crystal (PC) substrate. The PC structure functions as an optical resonator at the wavelength where the analyte absorption is strong. The optical resonance of the PC sensor provides an intensified evanescent field with respect to the excitation light source and results in enhanced optical absorption by surface-immobilized samples. For the analysis of a light absorbing dye deposited on the PC surface, the intensity of photoacoustic signal was enhanced by more than 10-fold in comparison to an un-patterned acrylic substrate. The technique was also applied to detect gold nanorods and exhibited more than 40 times stronger photoacoustic signals. The demonstrated approach represents a potential path towards single molecule absorption spectroscopy with greater performance and inexpensive instrumentation.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Growth-substrate induced performance degradation in chemically synthesized monolayer MoS{sub 2} field effect transistors

We report on the electronic transport properties of single-layer thick chemical vapor deposition (CVD) grown molybdenum disulfide (MoS{sub 2}) field-effect transistors (FETs) on Si/SiO{sub 2} substrates. MoS{sub 2} has been extensively investigated for the past two years as a potential semiconductor analogue to graphene. To date, MoS{sub 2} samples prepared via mechanical exfoliation have demonstrated field-effect mobility values which are significantly higher than that of CVD-grown MoS{sub 2}. In this study, we will show that the intrinsic electronic performance of CVD-grown MoS{sub 2} is equal or superior to that of exfoliated material and has been possibly masked by a combination of interfacial contamination on the growth substrate and residual tensile strain resulting from the high-temperature growth process. We are able to quantify this strain in the as-grown material using pre- and post-transfer metrology and microscopy of the same crystals. Moreover, temperature-dependent electrical measurements made on as-grown and transferred MoS{sub 2} devices following an identical fabrication process demonstrate the improvement in field-effect mobility.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Interaction of Sn atoms with defects introduced by ion implantation in Ge substrate

The interaction of Sn atoms with defects induced by Sn implantation of Ge substrates with antimony (Sb) as an n-type dopant and the impact of H{sub 2} annealing on these defects were investigated by comparison with defects induced by Ge self-implantation. In the Ge samples implanted with either Sn or Ge, and annealed at temperatures of less than 200 °C, divacancies, Sb-vacancy complexes with single or double acceptor-like states, and defects related to Sb and interstitial Ge atoms were present. On the other hand, after annealing at 500 °C in an N{sub 2} or H{sub 2} atmosphere, defects with different structures were observed in the Sn-implanted samples by deep level transition spectroscopy. The energy levels of the defects were 0.33 eV from the conduction band minimum and 0.55 eV from the valence band maximum. From the capacitance-voltage (C-V) characteristics, interaction between Sn atoms and defects after annealing at 500 °C was observed. The effect of H{sub 2} annealing at around 200 °C was observed in the C-V characteristics, which can be attributed to hydrogen passivation, and this effect was observed in both the Ge- and Sn-implanted samples. These results suggest the presence of defects that interact with Sn or hydrogen atoms. This indicates the possibility of defect control in Ge substrates by Sn or hydrogen incorporation. Such defect control could yield high-performance Ge-based devices.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Tailoring broadband light trapping of GaAs and Si substrates by self-organised nanopatterning

We report on the formation of high aspect ratio anisotropic nanopatterns on crystalline GaAs (100) and Si (100) substrates exploiting defocused Ion Beam Sputtering assisted by a sacrificial self-organised Au stencil mask. The tailored optical properties of the substrates are characterised in terms of total reflectivity and haze by means of integrating sphere measurements as a function of the morphological modification at increasing ion fluence. Refractive index grading from sub-wavelength surface features induces polarisation dependent anti-reflection behaviour in the visible-near infrared (VIS-NIR) range, while light scattering at off-specular angles from larger structures leads to very high values of the haze functions in reflection. The results, obtained for an important class of technologically relevant materials, are appealing in view of photovoltaic and photonic applications aiming at photon harvesting in ultrathin crystalline solar cells.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Self-assembly of triangular quantum dots on (111)A substrates by droplet epitaxy

We report the self-assembly of triangular GaAs quantum dots (QDs) on (111)A substrates using droplet epitaxy. Shape transition from hexagonal to triangular QDs is observed with increasing crystallizing temperature. The mechanism of the morphological change is discussed in terms of different growth rates of step edges on a (111)A substrate.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Microscopic mechanisms of graphene electrolytic delamination from metal substrates

In this paper, hydrogen bubbling delamination of graphene (Gr) from copper using a strong electrolyte (KOH) water solution was performed, focusing on the effect of the KOH concentration (C{sub KOH}) on the Gr delamination rate. A factor of ∼10 decrease in the time required for the complete Gr delamination from Cu cathodes with the same geometry was found increasing C{sub KOH} from ∼0.05 M to ∼0.60 M. After transfer of the separated Gr membranes to SiO{sub 2} substrates by a highly reproducible thermo-compression printing method, an accurate atomic force microscopy investigation of the changes in Gr morphology as a function of C{sub KOH} was performed. Supported by these analyses, a microscopic model of the delamination process has been proposed, where a key role is played by graphene wrinkles acting as nucleation sites for H{sub 2} bubbles at the cathode perimeter. With this approach, the H{sub 2} supersaturation generated at the electrode for different electrolyte concentrations was estimated and the inverse dependence of t{sub d} on C{sub KOH} was quantitatively explained. Although developed in the case of Cu, this analysis is generally valid and can be applied to describe the electrolytic delamination of graphene from several metal substrates.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Incorporation of La in epitaxial SrTiO{sub 3} thin films grown by atomic layer deposition on SrTiO{sub 3}-buffered Si (001) substrates

Strontium titanate, SrTiO{sub 3} (STO), thin films incorporated with lanthanum are grown on Si (001) substrates at a thickness range of 5–25 nm. Atomic layer deposition (ALD) is used to grow the La{sub x}Sr{sub 1−x}TiO{sub 3} (La:STO) films after buffering the Si (001) substrate with four-unit-cells of STO deposited by molecular beam epitaxy. The crystalline structure and orientation of the La:STO films are confirmed via reflection high-energy electron diffraction, X-ray diffraction, and cross-sectional transmission electron microscopy. The low temperature ALD growth (∼225 °C) and post-deposition annealing at 550 °C for 5 min maintains an abrupt interface between Si (001) and the crystalline oxide. Higher annealing temperatures (650 °C) show more complete La activation with film resistivities of ∼2.0 × 10{sup −2} Ω cm for 20-nm-thick La:STO (x ∼ 0.15); however, the STO-Si interface is slightly degraded due to the increased annealing temperature. To demonstrate the selective incorporation of lanthanum by ALD, a layered heterostructure is grown with an undoped STO layer sandwiched between two conductive La:STO layers. Based on this work, an epitaxial oxide stack centered on La:STO and BaTiO{sub 3} integrated with Si is envisioned as a material candidate for a ferroelectric field-effect transistor.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

The electronic and magnetic properties of La{sub 0.85}Zr{sub 0.15}MnO{sub 3} deposited on SrTiO{sub 3} and MgO substrates

The electronic and magnetic properties of tetravalent-ion-doped La{sub 0.85}Zr{sub 0.15}MnO{sub 3} (LZMO) thin films that were epitaxially grown on SrTiO{sub 3} (STO) and MgO substrates were studied using temperature-dependent x-ray diffraction (XRD), x-ray absorption near-edge structure, x-ray linear dichroism, and x-ray magnetic circular dichroism at the Mn L{sub 3,2}- and K-edge. XRD studies reveal that the LZMO thin films have compressive and tensile strains (along the c-axis) on the STO and MgO substrates, respectively. As the temperature is reduced from room temperature to below magnetic transition temperature, the preferentially occupied Mn majority-spin e{sub g} orbital changes from the in-plane d{sub x}{sup 2}{sub -y}{sup 2} to the out-of-plane d{sub 3z}{sup 2}{sub -r}{sup 2} orbital for LZMO/STO, and vice versa for LZMO/MgO. Experimental results suggest that the new hopping path that is mediated by the Mn{sup 2+} ions triggers a stronger d{sub 3z}{sup 2}{sub -r}{sup 2} orbital ordering of Mn{sup 3+} ions and enhances the ferromagnetic coupling between the Mn spin moments of t{sub 2g} electrons in LZMO/STO, whereas the strong tensile strain stabilizes the d{sub x}{sup 2}{sub -y}{sup 2} orbital by inducing lattice distortions of the MnO{sub 6} octahedra in LZMO/MgO.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Growth of InGaAs/GaAsP multiple quantum well solar cells on mis-orientated GaAs substrates

The effects of growth temperature on the properties of InGaAs/GaAsP multiple quantum well (MQW) solar cells on various mis-orientated GaAs substrates were studied using metalorganic vapor phase epitaxy. Thickness modulation effect caused by mismatch strain of InGaAs/GaAsP could be suppressed by low growth temperature. Consequently, abrupt MQWs with strong light absorption could be deposited on mis-oriented substrates. However, degradation in crystal quality and impurity incorporation are the main drawbacks with low temperature growth because they tend to strongly degraded carrier transport and collection efficiency. MQW solar cells grown at optimized temperature showed the better conversion efficiency. The further investigation should focus on improvement of crystal quality and background impurities.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Cost effective nanostructured copper substrates prepared with ultrafast laser pulses for explosives detection using surface enhanced Raman scattering

Ultrafast laser pulses induced surface nanostructures were fabricated on a copper (Cu) target through ablation in acetone, dichloromethane, acetonitrile, and chloroform. Surface morphological information accomplished from the field emission scanning electron microscopic data demonstrated the diversities of ablation mechanism in each case. Fabricated Cu substrates were utilized exultantly to investigate the surface plasmon (localized and propagating) mediated enhancements of different analytes using surface enhance Raman scattering (SERS) studies. Multiple utility of these substrates were efficiently demonstrated by collecting the SERS data of Rhodamine 6G molecule and two different secondary explosive molecules such as 5-amino-3-nitro-l,2,4-triazole and trinitrotoluene on different days which were weeks apart. We achieved significant enhancement factors of >10{sup 5} through an easily adoptable cleaning procedure.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Influence of composition and substrate miscut on the evolution of (105)-terminated in-plane Si{sub 1−x}Ge{sub x} quantum wires on Si(001)

Isolated in-plane wires on Si(001) are promising nanostructures for quantum transport applications. They can be fabricated in a catalyst-free process by thermal annealing of self-organized Si{sub 1−x}Ge{sub x} hut clusters. Here, we report on the influence of composition and small substrate miscuts on the unilateral wire growth during annealing at 570 °C. The addition of up to 20% of Si mainly affects the growth kinetics in the presence of energetically favorable sinks for diffusing Ge atoms, but does not significantly change the wire base width. For the investigated substrate miscuts of <0.12°, we find geometry-induced wire tapering, but no strong influence on the wire lengths. Miscuts <0.02° lead to almost perfect quantum wires terminated by virtually step-free (105) and (001) facets over lengths of several 100 nm. Generally, the investigated Si{sub 1−x}Ge{sub x} wires are metastable: Annealing at ≥600 °C under otherwise identical conditions leads to the well-known coexistence of Si{sub 1−x}Ge{sub x} pyramids and domes.

36 MATERIALS SCIENCE↗

Alumina nanoparticle/polymer nanocomposite dielectric for flexible amorphous indium-gallium-zinc oxide thin film transistors on plastic substrate with superior stability

In this study, the Al{sub 2}O{sub 3} nanoparticles were incorporated into polymer as a nono-composite dielectric for used in a flexible amorphous Indium-Gallium-Zinc Oxide (a-IGZO) thin-film transistor (TFT) on a polyethylene naphthalate substrate by solution process. The process temperature was well below 100 °C. The a-IGZO TFT exhibit a mobility of 5.13 cm{sup 2}/V s on the flexible substrate. After bending at a radius of 4 mm (strain = 1.56%) for more than 100 times, the performance of this a-IGZO TFT was nearly unchanged. In addition, the electrical characteristics are less altered after positive gate bias stress at 10 V for 1500 s. Thus, this technology is suitable for use in flexible displays.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Towards large size substrates for III-V co-integration made by direct wafer bonding on Si

We report the first demonstration of 200 mm InGaAs-on-insulator (InGaAs-o-I) fabricated by the direct wafer bonding technique with a donor wafer made of III-V heteroepitaxial structure grown on 200 mm silicon wafer. The measured threading dislocation density of the In{sub 0.53}Ga{sub 0.47}As (InGaAs) active layer is equal to 3.5 × 10{sup 9} cm{sup −2}, and it does not degrade after the bonding and the layer transfer steps. The surface roughness of the InGaAs layer can be improved by chemical-mechanical-polishing step, reaching values as low as 0.4 nm root-mean-square. The electron Hall mobility in 450 nm thick InGaAs-o-I layer reaches values of up to 6000 cm{sup 2}/Vs, and working pseudo-MOS transistors are demonstrated with an extracted electron mobility in the range of 2000–3000 cm{sup 2}/Vs. Finally, the fabrication of an InGaAs-o-I substrate with the active layer as thin as 90 nm is achieved with a Buried Oxide of 50 nm. These results open the way to very large scale production of III-V-o-I advanced substrates for future CMOS technology nodes.

36 MATERIALS SCIENCE↗