Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “STAR MODELS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,621 records · Page 90

RAPID TeV VARIABILITY IN BLAZARS AS A RESULT OF JET-STAR INTERACTION

We propose a new model for the description of ultra-short flares from TeV blazars by compact magnetized condensations (blobs), produced when red giant stars cross the jet close to the central black hole. Our study includes a simple dynamic model for the evolution of the envelope lost by the star in the jet and its high-energy nonthermal emission through different leptonic and hadronic radiation mechanisms. We show that the fragmented envelope of the star can be accelerated to Lorentz factors up to 100 and effectively radiate the available energy in gamma rays predominantly through proton synchrotron radiation or external inverse Compton scattering of electrons. The model can readily explain the minute-scale TeV flares on top of longer (typical timescales of days) gamma-ray variability as observed from the blazar PKS 2155-304. In the framework of the proposed scenario, the key parameters of the source are robustly constrained. In the case of proton synchrotron origin of the emission, a mass of the central black hole of M{sub BH} Almost-Equal-To 10{sup 8} M{sub Sun }, a total jet power of L{sub j} Almost-Equal-To 2 Multiplication-Sign 10{sup 47} erg s{sup -1}, and a Doppler factor of the gamma-ray emitting blobs of {delta} {>=} 40 are required. For the external inverse Compton model, parameters of M{sub BH} Almost-Equal-To 10{sup 8} M{sub Sun }, L{sub j} Almost-Equal-To 10{sup 46} erg s{sup -1}, and {delta} {>=} 150 are required.

79 ASTRONOMY AND ASTROPHYSICS↗

MODELS OF KILONOVA/MACRONOVA EMISSION FROM BLACK HOLE–NEUTRON STAR MERGERS

Black hole–neutron star (BH–NS) mergers are among the most promising gravitational-wave sources for ground-based detectors, and gravitational waves from BH–NS mergers are expected to be detected in the next few years. The simultaneous detection of electromagnetic counterparts with gravitational waves would provide rich information about merger events. Among the possible electromagnetic counterparts from BH–NS mergers is the so-called kilonova/macronova, emission powered by the decay of radioactive r-process nuclei, which is one of the best targets for follow-up observations. We derive fitting formulas for the mass and the velocity of ejecta from a generic BH–NS merger based on recently performed numerical-relativity simulations. We combine these fitting formulas with a new semi-analytic model for a BH–NS kilonova/macronova lightcurve, which reproduces the results of radiation-transfer simulations. Specifically, the semi-analytic model reproduces the results of each band magnitude obtained by the previous radiation-transfer simulations within ∼1 mag. By using this semi-analytic model we found that, at 400 Mpc, the kilonova/macronova is as bright as 22–24 mag for cases with a small chirp mass and a high black hole spin, and >28 mag for a large chirp mass and a low black hole spin. We also apply our model to GRB 130603B as an illustration, and show that a BH–NS merger with a rapidly spinning black hole and a large neutron star radius is favored.

79 ASTRONOMY AND ASTROPHYSICS↗

Improve the Search of Very Metal-poor Stars Using the Deep Learning Method

Very metal-poor (VMP) stars have [Fe/H] < -2.0 dex. They are among the oldest stars in the universe, and their unique metallicity can help explore the enrichment mechanism and evolutionary history of the chemical elements of stars in the early universe. However, most current stellar parameter estimation methods do not perform well in determining the stellar parameters of VMP stars, which limits our ability to discover and exploit the properties of VMP stars. In this study, we propose a new model based on a convolutional neural network to determine the stellar atmospheric parameters of VMP stars. We tested our model on the LAMOST spectra; our model can determine the effective temperature (T {sub eff}), surface gravity (log g), metallicity ([Fe/H]), and carbon abundance ([C/Fe]) of the LAMOST spectra with precisions σ(T {sub eff}) = 134.82 K, σ(log g) = 0.33 dex, σ ([Fe/H]) = 0.20 dex, and σ([C/Fe]) = 0.35 dex. Furthermore, our model can distinguish VMP stars from normal stars with an accuracy of 88.65%. We also compared this model with other widely used methods, and found that this method performs better than other methods. It can be applied to the stellar parameter pipelines of upcoming large surveys such as 4MOST, WEAVES, and MOONS to search for VMP stars and identify carbon-enhanced metal-poor stars.

36 MATERIALS SCIENCE↗

Quark matter symmetry energy and quark stars

We extend the confined-density-dependent-mass (CDDM) model to include isospin dependence of the equivalent quark mass. Within the confined-isospin-density-dependent-mass (CIDDM) model, we study the quark matter symmetry energy, the stability of strange quark matter, and the properties of quark stars. We find that including isospin dependence of the equivalent quark mass can significantly influence the quark matter symmetry energy as well as the properties of strange quark matter and quark stars. While the recently discovered large mass pulsars PSR J1614–2230 and PSR J0348+0432 with masses around 2 M {sub ☉} cannot be quark stars within the CDDM model, they can be well described by quark stars in the CIDDM model. In particular, our results indicate that the two-flavor u-d quark matter symmetry energy should be at least about twice that of a free quark gas or normal quark matter within the conventional Nambu-Jona-Lasinio model in order to describe PSR J1614–2230 and PSR J0348+0432 as quark stars.

79 ASTRONOMY AND ASTROPHYSICS↗

A scattering function of star polymers including excluded volume effects

In this work we present a new model for the form factor of a star polymer consisting of self-avoiding branches. This new model incorporates excluded volume effects and is derived from the two point correlation function for a star polymer.. We compare this model to small angle neutron scattering (SANS) measurements from polystyrene (PS) stars immersed in a good solvent, tetrahydrofuran (THF). It is shown that this model provides a good description of the scattering signature originating from the excluded volume effect and it explicitly elucidates the connection between the global conformation of a star polymer and the local stiffness of its constituent branch.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The Role of Strong Gravity and the Nuclear Equation of State on Neutron-star Common-envelope Accretion

Common-envelope evolution is important in the formation of neutron star binaries within the isolated binary formation channel. As a neutron star inspirals within the envelope of a primary massive star, it accretes and spins up. Because neutron stars are in the strong-gravity regime, they have a substantial relativistic mass deficit, i.e., their gravitational mass is less than their baryonic mass. This effect causes some fraction of the accreted baryonic mass to convert into neutron star binding energy. The relativistic mass deficit also depends on the nuclear equation of state, since more compact neutron stars will have larger binding energies. We model the mass growth and spin-up of neutron stars inspiraling within common-envelope environments and quantify how different initial binary conditions and hadronic equations of state affect the post-common-envelope neutron star's mass and spin. From these models, we find that neutron star mass growth is suppressed by ≈15%–30%. We also find that for a given amount of accreted baryonic mass, more compact neutron stars will spin-up faster while gaining less gravitational mass, and vice versa. Here, this work demonstrates that a neutron star's strong gravity and nuclear microphysics plays a role in neutron-star-common-envelope evolution, in addition to the macroscopic astrophysics of the envelope. Strong gravity and the nuclear equation of state may thus affect both the population properties of neutron star binaries and the cosmic double neutron star merger rate.

79 ASTRONOMY AND ASTROPHYSICS↗

Cosmology with hypervelocity stars

In the standard cosmological model, the merger remnant of the Milky Way and Andromeda (Milkomeda) will be the only galaxy remaining within our event horizon once the Universe has aged by another factor of ten, ∼ 10{sup 11} years after the Big Bang. After that time, the only extragalactic sources of light in the observable cosmic volume will be hypervelocity stars being ejected continuously from Milkomeda. Spectroscopic detection of the velocity-distance relation or the evolution in the Doppler shifts of these stars will allow a precise measurement of the vacuum mass density as well as the local matter distribution. Already in the near future, the next generation of large telescopes will allow photometric detection of individual stars out to the edge of the Local Group, and may target the ∼ 10{sup 5±1} hypervelocity stars that originated in it as cosmological tracers.

79 ASTRONOMY AND ASTROPHYSICS↗

Two binary cycles of GX 301-2

The slow X-ray pulsar, GX 301-2, has been observed throughout two full binary cycles of 41.5 days in the energy range 13-170 keV by the UCSD/MIT Hard X-Ray and Low Energy Gamma-Ray Experiment aboard HEAO 1. Increased intensity and variability was observed for about four days near periastron during the two binary cycles, which were separated by six months in 1978. The spectral shape was not observed to vary with binary phase, with the possible exception of a steepening of the continuum above 20 keV near superior conjunction in one of the two observing epochs. Evidence for a spectral line was found in the data at the 1-percent confidence level, but not confirmed in the remaining data. The temporal variability of GX 301-2 was not consistent with simple models of X-ray production by interaction of the stellar wind with the neutron star, implying that future modeling must include effects on wind density and speed caused by shocks in the wind, the X-ray flux from the neutron star, the gravitational influence of the neutron star, and possible mass accumulation near the neutron star.

Rothschild, Richard E.↗

PROBING THE ROLE OF DYNAMICAL FRICTION IN SHAPING THE BSS RADIAL DISTRIBUTION. I. SEMI-ANALYTICAL MODELS AND PRELIMINARY N-BODY SIMULATIONS

We present semi-analytical models and simplified N-body simulations with 10{sup 4} particles aimed at probing the role of dynamical friction (DF) in determining the radial distribution of blue straggler stars (BSSs) in globular clusters. The semi-analytical models show that DF (which is the only evolutionary mechanism at work) is responsible for the formation of a bimodal distribution with a dip progressively moving toward the external regions of the cluster. However, these models fail to reproduce the formation of the long-lived central peak observed in all dynamically evolved clusters. The results of N-body simulations confirm the formation of a sharp central peak, which remains as a stable feature over time regardless of the initial concentration of the system. In spite of noisy behavior, a bimodal distribution forms in many cases, with the size of the dip increasing as a function of time. In the most advanced stages, the distribution becomes monotonic. These results are in agreement with the observations. Also, the shape of the peak and the location of the minimum (which, in most of cases, is within 10 core radii) turn out to be consistent with observational results. For a more detailed and close comparison with observations, including a proper calibration of the timescales of the dynamical processes driving the evolution of the BSS spatial distribution, more realistic simulations will be necessary.

79 ASTRONOMY AND ASTROPHYSICS↗

Blind Modeling Validation Exercises Using the Horizontal Dry Cask Simulator

The U.S. Department of Energy (DOE) established a need to understand the thermal-hydraulic properties of dry storage systems for commercial spent nuclear fuel (SNF) in response to a shift towards the storage of high-burnup (HBU) fuel (> 45 gigawatt days per metric ton of uranium, or GWd/MTU). This shift raises concerns regarding cladding integrity, which faces increased risk at the higher temperatures within spent fuel assemblies present within HBU fuel compared to low-burnup fuel (≤ 45 GWd/MTU). A dry cask simulator (DCS) was built at Sandia National Laboratories (SNL) in Albuquerque, New Mexico to produce validation-quality data that can be used to test the accuracy of the modeling used to predict cladding temperatures. These temperatures are critical to evaluating cladding integrity throughout the storage cycle of commercial spent nuclear fuel. A model validation exercise was previously carried out for the DCS in a vertical configuration. Lessons learned during the previous validation exercise have been applied to a new, blind study using a horizontal dry cask simulator (HDCS). Three modeling institutions – the Nuclear Regulatory Commission (NRC), Pacific Northwest National Laboratory (PNNL), and Empresa Nacional del Uranio, S.A., S.M.E. (ENUSA) – were granted access to the input parameters from the DCS Handbook, SAND2017-13058R, and results from a limited data set from the horizontal BWR dry cask simulator tests reported in the HDCS update report, SAND2019-11688R. With this information, each institution was tasked to calculate peak cladding temperatures and air mass flow rates for ten HDCS test cases. Axial as well as vertical and horizontal transverse temperature profiles were also calculated. These calculations were done using modeling codes (ANSYS/Fluent, STAR-CCM+, or COBRA-SFS), each with their own unique combination of modeling assumptions and boundary conditions. For this validation study, the ten test cases of the horizontal dry cask simulator were defined by three independent variables – fuel assembly decay heat (0.5 kW, 1 kW, 2.5 W, and 5 kW), internal backfill pressure (100 kPa and 800 kPa), and backfill gas (helium and air). The plots provided in Chapter 3 of this report show the axial, vertical, and horizontal temperature profiles obtained from the dry cask simulator experiments in the horizontal configuration and the corresponding models used to describe the thermal-hydraulic behavior of this system. The tables provided in Chapter 3 illustrate the closeness of fit of the model data to the experiment data through root mean square (RMS) calculations of the error in peak cladding temperatures (PCTs), PCT axial locations, axial temperature profiles, vertical and horizontal temperature profiles at two different axial locations, and air mass flow rates for the ten test cases, normalized by the experimental results. The model results are assigned arbitrary model numbers to retain anonymity. Due to the relatively flat axial temperature profiles, small temperature gradients resulted in large deviations of all models’ PCT axial location from the experimental PCT axial location. When the PCT axial location error is excluded in the calculation of the combined RMS of the normalized errors that considers PCT, the temperature profiles, and the air mass flow rates, the model data fits the experimental data to within 5%. When the vault information is excluded, the model data fits the experimental data to within 2.5%. An error analysis was developed further for one model, using the model and experimental uncertainties in each validation parameter to calculate validation uncertainties. The uncertainties for each parameter were used to define quantifiable validation criteria. For this analysis, the model was considered validated for a given comparison metric if the normalized error in that metric divided by the validation uncertainty was less than or equal to 1. When considering the combined RMS of the normalized errors of all metrics divided by their validation uncertainties, the model was found to have satisfied the criterion for model validation.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

The White Dwarfs of the Old, Solar-metallicity Open Star Cluster Messier 67: Properties and Progenitors

The old, solar-metallicity open cluster Messier 67 has long been considered a lynchpin in the study and understanding of the structure and evolution of solar-type stars. The same is arguably true for stellar remnants; the white dwarf population of M67 provides crucial observational data for understanding and interpreting white dwarf populations and evolution. In this work, we determine the white dwarf masses and derive their progenitor star masses using high signal-to-noise spectroscopy of warm (≳10,000 K) DA white dwarfs in the cluster. From this, we are able to derive each white dwarf’s position on the initial–final mass relation (IFMR), with an average M {sub WD} = 0.60 ± 0.01 M {sub ⊙} and progenitor mass M {sub i} = 1.52 ± 0.04 M {sub ⊙}. These values are fully consistent with recently published linear and piecewise linear fits to the semiempirical IFMR and provide a crucial, precise anchor point for the IFMR for solar-metallicity, low-mass stars. The mean mass of M67 white dwarfs is also consistent with the sharp narrow peak in the local field white dwarf mass distribution, indicating that a majority of recently formed field white dwarfs come from stars with progenitor masses of ≈1.5 M {sub ⊙}. Our results enable more precise modeling of the Galactic star formation rate encoded in the field white dwarf mass distribution.

47 OTHER INSTRUMENTATION↗

Evolution of close binary systems: Observational aspects

Detached close binary systems define the main sequence band satisfactorily, but very little is known about the masses of giants and supergiants. High dispersion international ultraviolet explorer satellite observations promise an improvement, since blue companions are now frequently found to late type supergiants. Mu Sagittaril and in particular Xi Aurigae are discussed in more detail. The barium star abundance anomaly appears to be due to mass transfer in interacting systems. The symbiotic stars are another type of binary systems containing late type giants; several possible models for the hotter star and for the type of interaction are discussed. The W Serpentis stars appear to be Algols in the rapid phase of mass transfer, but a possible link relating them to the symbiotics is also indicated. Evidence of hot circumstellar plasmas has now been found in several ordinary Algols; there may exist a smooth transition between very quiescent Algols and the W Serpentis stars. Beta Lyrae is discussed in the light of new spectrophotometric results.

Plavec, M. J.↗

Terrestrial Planet Formation in Binary Star Systems

Most stars reside in binary/multiple star systems; however, previous models of planet formation have studied growth of bodies orbiting an isolated single star. Disk material has been observed around one or both components of various young close binary star systems. If planets form at the right places within such disks, they can remain dynamically stable for very long times. We have simulated the late stages of growth of terrestrial planets in both circumbinary disks around 'close' binary star systems with stellar separations ($a_B$) in the range 0.05 AU $\le a_B \le$ 0.4 AU and binary eccentricities in the range $0 \le e \le 0.8$ and circumstellar disks around individual stars with binary separations of tens of AU. The initial disk of planetary embryos is the same as that used for simulating the late stages of terrestrial planet growth within our Solar System and around individual stars in the Alpha Centauri system (Quintana et al. 2002, A.J., 576, 982); giant planets analogous to Jupiter and Saturn are included if their orbits are stable. The planetary systems formed around close binaries with stellar apastron distances less than or equal to 0.2 AU with small stellar eccentricities are very similar to those formed in the Sun-Jupiter-Saturn, whereas planetary systems formed around binaries with larger maximum separations tend to be sparser, with fewer planets, especially interior to 1 AU. Likewise, when the binary periastron exceeds 10 AU, terrestrial planets can form over essentially the entire range of orbits allowed for single stars with Jupiter-like planets, although fewer terrestrial planets tend to form within high eccentricity binary systems. As the binary periastron decreases, the radial extent of the terrestrial planet systems is reduced accordingly. When the periastron is 5 AU, the formation of Earth-like planets near 1 AU is compromised.

Lissauer, J. J.↗

ARE ALL SHORT-HARD GAMMA-RAY BURSTS PRODUCED FROM MERGERS OF COMPACT STELLAR OBJECTS?

The origin and progenitors of short-hard gamma-ray bursts (GRBs) remain a puzzle and a highly debated topic. Recent Swift observations suggest that these GRBs may be related to catastrophic explosions in degenerate compact stars, denoted as 'Type I' GRBs. The most popular models include the merger of two compact stellar objects (NS-NS or NS-BH). We utilize a Monte Carlo approach to determine whether a merger progenitor model can self-consistently account for all the observations of short-hard GRBs, including a sample with redshift measurements in the Swift era (z-known sample) and the CGRO/BATSE sample. We apply various merger time delay distributions invoked in compact star merger models to derive the redshift distributions of these Type I GRBs, and then constrain the unknown luminosity function of Type I GRBs using the observed luminosity-redshift (L-z) distributions of the z-known sample. The best luminosity function model, together with the adopted merger delay model, is then applied to confront the peak flux distribution (log N-log P distribution) of the BATSE and Swift samples. We find that for all the merger models invoking a range of merger delay timescales (including those invoking a large fraction of 'prompt mergers'), it is difficult to reconcile the models with all the data. The data are instead statistically consistent with the following two possible scenarios. First, that short/hard GRBs are a superposition of compact-star-merger-origin (Type I) GRBs and a population of GRBs that track the star formation history, which are probably related to the deaths of massive stars (Type II GRBs). Second, the entire short/hard GRB population is consistent with a typical delay of 2 Gyr with respect to the star formation history with modest scatter. This may point toward a different Type I progenitor than the traditional compact star merger models.

79 ASTRONOMY AND ASTROPHYSICS↗

Galaxy Size and Rotation Curve Diversity in ΛCDM with Baryons

The observed rotation curves of dwarf galaxies exhibit significant diversity at fixed halo mass, challenging galaxy formation within the cold dark matter (CDM) model. Previous cosmological galaxy formation simulations with baryonic physics fail to reproduce the full diversity of rotation curves, suggesting that there is a flaw in baryonic feedback models, observational bias, or that an alternative to CDM must be invoked. In this work, we use the Marvelous Massive Dwarf zoom-in simulations, a suite of high-resolution dwarf simulations with M 200 ∼ 10 10 –10 11 M ⊙ and M * ∼ 10 7 –10 9 M ⊙ , designed to target the mass range where the galaxy rotation curve diversity is maximized, i.e., between and 100 km s −1 . We add to this a set of low-mass galaxies from the Marvel Dwarf Zoom Volumes to extend the galaxy mass range to lower values. Our fiducial star formation and feedback models produce simulated dwarfs with a broader range of rotation curve shapes, similar to observations. These simulations both create dark matter cores via baryonic feedback, reproducing the slower-rising rotation curves, while also allowing for compact galaxies and steeply rising rotation curves. Our simulated dwarfs also reproduce the observed size–M * relation, including scatter, producing both extended and compact dwarfs for the first time in simulated field dwarfs. However, the slowly rising and high baryon mass fraction, as well as the steeply rising and low baryon mass fraction, remain missing. We explore star formation and feedback models and conclude that previous simulations may have had feedback that was too strong to produce compact dwarfs.

Cruz, Akaxia [Flatiron Institute, New York, NY (Un↗

Modeling of steady, rotational, transonic winds from rotating stars and galaxies

The theory of steady transonic winds from condensed bodies is extended to general, two-dimensional, axisymmetric systems. A stream function is used to reduce the gasdynamics equations to a single, second-order differential equation plus an algebraic equation for the density. The approach extends Parker's (1958) quasi-one-dimensional theory, which uses Bernoulli's theorem, to a complete two-dimensional calculation which includes vorticity and rotation. The conceptual basis of the stream function approach is described in detail, and a numerical method for solving the resulting equations is presented. The applications illustrate solutions for stellar (spherical source surface) and galactic (oblate spheroidal source surface) models. Among other things, it is found that for rapidly rotating stellar models the Coriolis force dominates the centrifugal terms and the streamlines bend toward the rotation axis as a consequence of the axisymmetry. For both the rotating and nonrotating galaxy models, the streamlines bend toward the equator.

Kopriva, D. A.↗

Circumstellar dust around AGB stars and implications for infrared emission from galaxies

Stellar population synthesis (SPS) models are used to infer many galactic properties including star formation histories, metallicities, and stellar and dust masses. However, most SPS models neglect the effect of circumstellar dust shells around evolved stars and it is unclear to what extent they impact the analysis of spectral energy distributions (SEDs). To overcome this shortcoming we have created a new set of circumstellar dust models, using the radiative transfer code DUSTY, for asymptotic giant branch (AGB) stars and incorporated them into the Flexible Stellar Population Synthesis code. The circumstellar dust models provide a good fit to individual AGB stars as well as the IR color–magnitude diagrams of the Large and Small Magellanic Clouds. IR luminosity functions from the Large and Small Magellanic Clouds are not well-fit by the 2008 Padova isochrones when coupled to our circumstellar dust models and so we adjusted the lifetimes of AGB stars in the models to provide a match to the data. We show, in agreement with previous work, that circumstellar dust from AGB stars can make a significant contribution to the IR (≳4 μm) emission from galaxies that contain relatively little diffuse dust, including low-metallicity and/or non-star-forming galaxies. Our models provide a good fit to the mid-IR spectra of early-type galaxies. Circumstellar dust around AGB stars appears to have a small effect on the IR SEDs of metal-rich star-forming galaxies (i.e., when A{sub V} ≳ 0.1). Stellar population models that include circumstellar dust will be needed to accurately interpret data from the James Webb Space Telescope and other IR facilities.

79 ASTRONOMY AND ASTROPHYSICS↗

CLUES ON THE REJUVENATION OF THE S0 GALAXY NGC 404 FROM THE CHEMICAL ABUNDANCE OF ITS OUTER DISK

The oxygen abundance of the outer disk of the nearby S0 galaxy NGC 404, a prototypical early-type galaxy with extended star formation, has been derived from the analysis of H II region spectra. The high mean value found, 12 + log(O/H) = 8.6 {+-} 0.1, equivalent to approximately 80% of the solar value, argues against both the previously proposed cold accretion and recent merger scenarios as viable mechanisms for the assembly of the star-forming gas. The combination of the present-day gas metallicity with the published star formation history of this galaxy favors a model in which the recent star forming activity represents the declining tail of the original one.

79 ASTRONOMY AND ASTROPHYSICS↗