Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “SEA LEVEL”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,621 records · Page 90

Ride quality flight testing

The ride quality experienced by passengers is a function of airframe rigid-body, elastic dynamic responses, autopilot, and stability augmentation system control inputs. A frequency response method has been developed to select sinusoidal elevator input time histories yielding vertical load factor distributions, within a given limit, as a function of fuselage station. The numerical technique is illustrated by applying two-degree-of-freedom short-period and first symmetric mode equations of motion to a B-1 aircraft at Mach 0.85 during sea level flight conditions.

Swaim, R. L.↗

Measurements of earth-space attenuation at 230 GHz

Measurements of attenuation at 230 GHz through the total atmosphere due to the presence of oxygen and water vapor molecules, clouds, and rain are presented. The measurements were carried out using a specially designed superheterodyne receiver mounted on a sun tracker. Simultaneous measurements were also carried out at 13 GHz. For a measuring site close to sea level at Holmdel, NJ, the 'clear-sky' zenith attenuation was found as a function of the measured ground water vapor density. When the ground temperature was below about 7 C, most cloud and overcast gave less than 0.5-dB attenuation, whereas with a ground temperature greater than 13 C, cloud attenuation was 8-10 times greater. Calculations of zenith attenuation in the 230-GHz atmospheric window were also made using the Gross analytic line shape, Schulze-Tolbert empirical line shape, and an empirically modified Gross line shape. These calculations were based on determinations of water vapor density and temperature made at the measurement site, and on radiosonde measurements made at a distance of 80 km away.

Wrixon, G. T.↗

Design and verification of a turbofan swirl augmentor

The paper discusses the details of the design and verification testing of a full-scale turbofan 'swirl' augmentor at sea level and altitude. No flameholders are required in the swirl augmentor since the radial motion of the hot pilot gases and subsequent combustion products provides a continuous ignition front across the stream. Results of rig testing of this full-scale swirl augmentor on an F100 engine, which are very encouraging, and future development plans are presented. The results validate the application of the centrifugal-force swirling flow concept to a turbofan augmentor.

Egan, W. J., Jr.↗

Ice sheet topography by satellite altimetry

The measured time between the transmission and rzturn of 13.9 GHz radar pulses from the GEOS 3 satellite (at a mean altitude of 844.5 km and an inclination of 114 deg 52 min) is used to determine the thickness of the Greenland ice cap, with an accuracy in surface elevation on the order of 2 m. Attention is given to changes in ice thickness as an indicator of climatic change in general, and change in mean sea level in particular. Each elevation data point obtained by the satellite represents an average along 0.67 km of ground track, and three-dimensional maps are presented to illustrate the data.

Brooks, R. L.↗

Evaporative water loss in man in a gravity-free environment

Daily evaporative water losses (EWL) during the three Skylab missions were measured indirectly using mass and water-balance techniques. The mean daily values of EWL for the nine crew members who averaged 1 hr of daily exercise were: preflight 1,750 + or - 37 (SE) ml or 970 + or - 20 ml/sq m and inflight 1,560 + or - 26 ml or 860 + or - 14 ml/sq m. Although it was expected the EWL would increase in the hypobaric environment of Skylab, an average decrease from preflight sea-level conditions of 11% was measured. The results suggest that weightlessness decreased sweat losses during exercise and possibly reduced insensible skin losses. The weightlessness environment apparently promotes the formation of an observed sweat film on the skin surface during exercise by reducing convective flow and sweat drippage, resulting in high levels of skin wettedness that favor sweat suppression.

Leach, C. S.↗

Infrared suppressor effect on T63 turboshaft engine performance

Tests were conducted to determine if there are performance penalties associated with the installation of infrared (IR) suppressors on the T63-A-700 turboshaft engine. The testing was done in a sea-level, static test cell. The same engine (A-E402808 B) was run with the standard OH-58 aircraft exhaust stacks and with the ejector-type IR suppressors in order to make a valid comparison. Repeatability of the test results for the two configurations was verified by rerunning the conditions over a period of days. Test results showed no measurable difference in performance between the standard exhaust stacks and the IR suppressors.

Bailey, E. E.↗

Effects of laminar flow control on the performance of a large span-distributed-load flying-wing cargo airplane concept

The effects of laminar flow control (LFC) on the performance of a large span-distributed-load flying-wing cargo airplane concept having a design payload of 2.669 MN and range of 5.93 Mm were determined. Two configurations were considered. One employed laminarized flow over the entire surfaces of the wing and vertical tails, with the exception of the estimated areas of interference due to the fuselage and engines. The other case differed only in that laminar flow was not applied to the flaps, elevons, spoilers, or rudders. The two cases are referred to as the 100 percent and 80 percent laminar configurations, respectively. The utilization of laminar flow control results in reductions in the standard day, sea level installed maximum static thrust per engine from 240 kN for the non-LFC configuration to 205 kN for the 100 percent laminar configuration and 209 kN for the 80 percent case. Weight increases due to the LFC systems cause increases in the operating empty weights of approximately 3 to 4 percent. The design takeoff gross weights decrease approximately 3 to 5 percent. The FAR-25 takeoff field distances for the LFC configurations are greater by about 6 to 7 percent. Fuel efficiencies for the respective configurations are increased 33 percent and 23 percent.

Jernell, L. S.↗

JT8D revised high-pressure turbine cooling and other outer air seal program

The JT8D high pressure turbine was revised to reduce leakage between the blade tip shrouds and the outer air seal, and engine testing was performed to determine the effect on performance. The addition of a second knife-edge on the blade tip shroud, the extension of the honeycomb seal land to cover the added knife-edge and an existing spoiler on the shroud, and a material substitution in the seal support ring to improve thermal growth characteristics are included. A relocation of the blade cooling air discharge to insure adequate cooling flow is required. Significant specific fuel consumption and exhaust gas temperature improvements were demonstrated with the revised turbine in sea level and simulated altitude engine tests. Inspection of the revised seal hardware after these tests showed no unusual wear or degradation.

Gaffin, W. O.↗

A turbojet-boosted two-stage-to-orbit space transportation system design study

The concept to use twin turbo-powered boosters for acceleration to supersonic staging speed followed by an all rocket powered orbiter stage was proposed. A follow-on design study was then made of the concept with the performance objective of placing a 29,483 Kg payload into a .2.6 X 195.3 km orbit. The study was performed in terms of analysis and trade studies, conceptual design, utility and economic analysis, and technology assessment. Design features of the final configuration included: strakes and area rule for improved take off and low transonic drag, variable area inlets, exits and turbine, and low profile fixed landing gear for turbojet booster stage. The payload required an estimated GLOW of 1,270,000 kg for injection in orbit. Each twin booster required afterburning turbojet engines each with a static sea level thrust rating of 444,800 N. Life cycle costs for this concept were comparable to a SSTO/SLED concept except for increased development cost due to the turbojet engine propulsion system.

Hepler, A. K.↗

Distribution of pulmonary ventilation and perfusion during short periods of weightlessness

Airborne experiments were conducted on four trained normal male subjects (28-40 yr) to study pulmonary function during short periods (22-27 sec) of zero gravity obtained by flying a jet aircraft through appropriate parabolic trajectories. The cabin was always pressurized to a sea-level altitude. The discussion is limited to pulmonary ventilation and perfusion. The results clearly demonstrate that gravity is the major factor causing nonuniformity in the topographical distribution of pulmonary ventilation. More importantly, the results suggest that virtually all the topographical nonuniformity of ventilation, blood flow, and lung volume observed under 1-G conditions are eliminated during short periods of zero gravity.

Michels, D. B.↗

The Space Shuttle

The Space Transportation System (STS) consisting of the Space Shuttle, Spacelab and the Upper Stages is described, together with the Shuttle's projected missions, test programs and costs. The Orbiter, due to be launched late in 1979, is roughly the size of a DC-9, with weight dry empty of about 75,000 kg, and is reusable, as are the two external fuel tanks. The shape and size of the cargo bay (unobstructed cylindrical compartment, 4.6 m in diameter and 18.3 m long), the engine structure (three rocket engines, fueled by liquid oxygen and liquid hydrogen, each capable of developing 1,668,080 N of thrust), the atmospheric condition in the Orbiter's cabin at sea level pressure, the surface insulation material of coated silica-fiber tiles and reinforced carbon-carbon material with a protection capability of up to 1650 C are discussed in detail. The Spacelab, designed by ESA to fit in the Orbiter's cargo bay for scientific research, and the Upper Stages, intended for inserting payloads in high-energy earth orbits, are also analyzed, as are the two-frequency band communication systems and the on board hardware.

Malkin, M. S.↗

Influence of the atmospheric masses on the gravitational field of the earth

Seasonal and latitude dependent corrections to the gravity and height anomalies are developed in order to account for the neglect of the atmospheric masses outside the geoid, when using Stokes' equation. It is shown that the atmospheric correction to gravity at sea level is almost constant, equal to 0.871 mgals with a variation of 2 microgals whereas the height anomaly correction varies between -0.1 cm and -1.3 cm. Further, when the combined latitudinal/seasonal dependence is neglected in the atmospheric corrections, the maximum error introduced is on the order of 40 microgals for the gravity corrections and 0.7 cm for the height anomaly corrections.

Christodoulidis, D. C.↗

Momentum spectra and charge ratio of muons as a function of zenith angles

A detailed calculation of both the sea-level muon momentum spectra and charge ratio at angles up to 79 deg shows excellent agreement with available experimental data in the 1-5000 GeV/c range. It shows that there is no need at present to invoke any change in the cosmic ray chemical composition, the proton and helium spectra, or the nature of the hadronic interaction from what is presently observed at proton energies up to about 1500 GeV. If scaling in the relevant energy range holds for hadrons of energies above about 1500 GeV, the present results suggest that the cosmic ray proton and helium spectrum above 100 GeV continues with the same spectral index of 2.75 up to at least about 10 TeV.

Badhwar, G. D.↗

Test verification of a turbofan partial swirl afterburner

Flamespreading velocities exceeding conventional turbulent flamespreading values were demonstrated in a strong centrifugal flow field. This centrifugal flow field flamespreading concept was integrated into an F100 turbofan engine afterburner by introducing swirling airflow into the afterburner. Successful tests were conducted on F100 Engine P072 at sea level and at altitude conditions in a test chamber. This paper summarizes the design approach, engine design verification tests and performance data. Engine tests showed the swirl afterburner increased fuel-air capability improving combustion stability at adverse conditions for combustion in the engine flight envelope. No engine performance or durability degradation was observed.

Hanloser, K. J.↗

Holocene submergence of southern Long Island, New York

Samples of basal peat from south-central Long Island have been dated by the radiocarbon method, and a local curve of submergence has been obtained for the past 8,000 yr. The submergence curve indicates that from 7,000 and 3,000 yr BP the Long Island coast was being submerged at a rate of about 25 cm per 100 yr, a rate which slowed markedly to about 10 cm per 100 yr during the past 3,000 yr. Sea-level data for before 7,000 yr show considerable scatter. Samples from the fringing and mid-bay marsh areas of the Great South Bay taken at depths of -1.1 and -0.3 m MSL gave radiocarbon ages of about 1,015 and 300 yr, respectively. The inception of these marshes is estimated to have occurred at about 2,000 yr BP. It seems likely that the change from open lagoon to saltmarsh was initiated in the Great South Bay by a decrease in the rate of submergence at about 3,000 yr BP, which allowed sedimentation to build the floor of the lagoon to a level suitable for colonization by marsh grasses.

Rampino, M. R.↗

The response of an RC line MWPC to primary cosmic rays

A simple 50 x 50 sq cm MWPC plane was arranged as an RC-line and flown on a balloon flight with the MSFC-UAH Cosmic Ray experiment. Positions of primary cosmic ray tracks in the RC-line were determined by the risetime method and compared with the expected position as indicated by a best line fitted through four planes of the conventional MWPC hodoscope. Mean errors were estimated for sea-level muons, and CNO group and iron group particles. It is believed that the delta-rays accompanying the primaries degraded the position resolution. Measured standard deviations allowing for uncertainty in the true track position are of the order of 1 cm or less in the primary charge region between 7 and 26.

Gregory, J. C.↗