Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “R MATRIX”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,621 records · Page 90

The dynamics and control of large flexible space structures, part 7

A preliminary Eulerian formulation of the in-plane dynamics of the proposed spacecraft control laboratory experiment configuration is undertaken when the mast is treated as a cantilever type beam and the reflector as a lumped mass at the end of the beam. Frequency and mode shapes are obtained for the open loop model of the beam system and the stability of closed loop control systems is analyzed by both frequency and time domain techniques. Environmental disturbances due to solar radiation pressure are incorporated into models of controlled large flexible orbiting platforms. Thermally induced deformations of simple beam and platform type structures are modelled and expressions developed for the disturbance torques resulting from the interaction of solar radiation pressure. Noise effects in the deterministic model of the hoop/column antenna system are found to cause a degradation in system performance. Appropriate changes in the ratio of plant noise to the measurement noise and/or changes in the control weighting matrix elements can improve transient and steady state performance.

Bainum, P. M.↗

A new layered mineral from the Mighei carbonaceous chondrite

The poorly characterized phase (PCP) of the Mighei CM2 carbonaceous chondrite is investigated using high-resolution TEM. Electron-microprobe analyses of samples from both olivine chondrules and the matrix are included in a table. Chondrule PCP is found to have higher concentrations of S and Ni and lower concentrations of Si, Mg, and Al than matrix PCP. TEM shows that PCP in this chondrite is an intergrowth of three phases (in various proportions): a major component containing Fe, S, Ni, and O in wavy rolled layers spaced about 5.4 A apart, an Fe-rich serpentinelike phyllosilicate with 7-A layer spacing, and submicron grains of magnetite, chromite, and phosphate. It is proposed that chondrule PCP contains mainly the 5-A phase with some grains, while matrix PCP consists mostly of the 5-A and 7-A phases.

Tomeoka, K.↗

A 4-node Bilinear Isoparametric Element in Rockwell NASTRAN

The development and evaluation of the Rockwell NASTRAN four node quadrilateral (QUAD4) element is presented. The element derivation utilizes bilinear isoparametric techniques both for membrane and bending characteristics. The QUAD4 element coordinate system, membrane properties, lumped mass matrix, and treatment of warping are based upon the COSMIC/NASTRAN QDMEMI element while the bending characteristics are based on a paper by T. J. R. Hughes. The effects of warping on the bending stiffness, consistent mass, and geometric stiffness are based upon a paper by R. H. MacNeal. Numerical integration is accomplished by Gaussian quadrature on a 2 x 2 grid. Practical user support features include variable element thickness, thermal analysis and layered composite material definitions.

Liao, C.↗

A finite element method for the thermochemical decomposition of polymeric materials. I - Theory

The governing differential equations are developed to model the thermomechanical behavior of chemically decomposing, polymeric materials. These equations account for thermal and gaseous diffusion through a poroelastic, transversely isotropic solid. The Bubnov-Galerkin finite element method is applied to the governing equations to cast the coupled set into a single matrix equation. A method for solving these equations simultaneously at each time step is discussed.

Sullivan, R. M.↗

Proposed framework for thermomechanical life modeling of metal matrix composites

The framework of a mechanics of materials model is proposed for thermomechanical fatigue (TMF) life prediction of unidirectional, continuous-fiber metal matrix composites (MMC's). Axially loaded MMC test samples are analyzed as structural components whose fatigue lives are governed by local stress-strain conditions resulting from combined interactions of the matrix, interfacial layer, and fiber constituents. The metallic matrix is identified as the vehicle for tracking fatigue crack initiation and propagation. The proposed framework has three major elements. First, TMF flow and failure characteristics of in situ matrix material are approximated from tests of unreinforced matrix material, and matrix TMF life prediction equations are numerically calibrated. The macrocrack initiation fatigue life of the matrix material is divided into microcrack initiation and microcrack propagation phases. Second, the influencing factors created by the presence of fibers and interfaces are analyzed, characterized, and documented in equation form. Some of the influences act on the microcrack initiation portion of the matrix fatigue life, others on the microcrack propagation life, while some affect both. Influencing factors include coefficient of thermal expansion mismatch strains, residual (mean) stresses, multiaxial stress states, off-axis fibers, internal stress concentrations, multiple initiation sites, nonuniform fiber spacing, fiber debonding, interfacial layers and cracking, fractured fibers, fiber deflections of crack fronts, fiber bridging of matrix cracks, and internal oxidation along internal interfaces. Equations exist for some, but not all, of the currently identified influencing factors. The third element is the inclusion of overriding influences such as maximum tensile strain limits of brittle fibers that could cause local fractures and ensuing catastrophic failure of surrounding matrix material. Some experimental data exist for assessing the plausibility of the proposed framework.

Halford, Gary R.↗

Human osteoblast-like cells respond to mechanical strain with increased bone matrix protein production independent of hormonal regulation

Exposure of osteosarcoma cell lines to chronic intermittent strain increases the activity of mechano-sensitive cation (SA-cat) channels. The impact of mechano-transduction on osteoblast function has not been well studied. We analyzed the expression and production of bone matrix proteins in human osteoblast-like osteosarcoma cells, OHS-4, in response to chronic intermittent mechanical strain. The OHS-4 cells exhibit type I collagen production, 1,25-Dihydroxyvitamin D-inducible osteocalcin, and mineralization of the extracellular matrix. The matrix protein message level was determined from total RNA isolated from cells exposed to 1-4 days of chronic intermittent strain. Northern analysis for type I collagen indicated that strain increased collagen message after 48 h. Immunofluorescent labeling of type I collagen demonstrated that secretion was also enhanced with mechanical strain. Osteopontin message levels were increased several-fold by the application of mechanical load in the absence of vitamin D, and the two stimuli together produced an additive effect. Osteocalcin secretion was also increased with cyclic strain. Osteocalcin levels were not detectable in vitamin D-untreated control cells. However, after 4 days of induced load, significant levels of osteocalcin were observed in the medium. With vitamin D present, osteocalcin levels were 4 times higher in the medium of strained cells compared to nonstrained controls. We conclude that mechanical strain of osteoblast-like cells is sufficient to increase the transcription and secretion of matrix proteins via mechano-transduction without hormonal induction.

NASA Discipline Number 40-40↗

Temporal expression and immunogold localization of Plodia interpunctella granulosis virus structural proteins

Monospecific antisera were produced against four structural proteins (VP12, VP17, VP31, and granulin) of the Plodia interpunctella granulosis virus using polypeptides derived by sodium dodecyl sulfate-polyacrylamide gel electrophoresis or acid extraction. The antisera were shown to be specific on immunoblots of SDS-PAGE separated granulosis virus and were further used to detect structural proteins in infected fat body lysates. Immunoblots of fat body lysates from early stages of infection indicated that VP12, VP17, VP31, and granulin were expressed by 2.5 days post-infection. Immunogold labeling of the virus using the monospecific antisera and electron microscopy confirmed earlier reports that granulin is located in the protein matrix, V17 is an envelope protein, and VP31 is a capsid protein.

Non-NASA Center↗

Life Limiting Behavior in Interlaminar Shear of Continuous Fiber-Reinforced Ceramic Matrix Composites at Elevated Temperatures

Interlaminar shear strength of four different fiber-reinforced ceramic matrix composites was determined with doublenotch shear test specimens as a function of test rate at elevated temperatures ranging from 1100 to 1316 C in air. Life limiting behavior, represented as interlaminar shear strength degradation with decreasing test rate, was significant for 2-D crossplied SiC/MAS-5 and 2-D plain-woven C/SiC composites, but insignificant for 2-D plain-woven SiC/SiC and 2-D woven Sylramic (Dow Corning, Midland, Michigan) SiC/SiC composites. A phenomenological, power-law delayed failure model was proposed to account for and to quantify the rate dependency of interlaminar shear strength of the composites. Additional stress rupture testing in interlaminar shear was conducted at elevated temperatures to validate the proposed model. The model was in good agreement with SiC/MAS-5 and C/SiC composites, but in poor to reasonable agreement with Sylramic SiC/SiC. Constant shear stress-rate testing was proposed as a possible means of life prediction testing methodology for ceramic matrix composites subjected to interlaminar shear at elevated temperatures when short lifetimes are expected.

Choi, Sung R.↗

Nanocomposite thin films for optical gas sensing

The disclosure relates to a plasmon resonance-based method for gas sensing in a gas stream utilizing a gas sensing material. In an embodiment the gas stream has a temperature greater than about 500.degree. C. The gas sensing material is comprised of gold nanoparticles having an average nanoparticle diameter of less than about 100 nanometers dispersed in an inert matrix having a bandgap greater than or equal to 5 eV, and an oxygen ion conductivity less than approximately 10.sup.-7 S/cm at a temperature of 700.degree. C. Exemplary inert matrix materials include SiO.sub.2, Al.sub.2O.sub.3, and Si.sub.3N.sub.4 as well as modifications to modify the effective refractive indices through combinations and/or doping of such materials. Changes in the chemical composition of the gas stream are detected by changes in the plasmon resonance peak. The method disclosed offers significant advantage over active and reducible matrix materials typically utilized, such as yttria-stabilized zirconia (YSZ) or TiO.sub.2.

47 OTHER INSTRUMENTATION↗

Measurement of the t-channel single top quark cross section in proton-proton collisions at $\sqrt{s}=5.02$ TeV

The single top quark t-channel production cross section is measured in proton-proton collisions at the CERN LHC at $\sqrt{s}=5.02$ TeV, using data recorded with the CMS detector in 2017, corresponding to an integrated luminosity of 302 pb −1 , and resulting in the first CMS measurement of the process at that energy. Events with one electron or muon and two or more jets, among which at least one is identified as originating from a b quark fragmentation, are analyzed. The combined cross section of single top quark (tq) and single top antiquark ($\overline{\mathrm{t}}\mathrm{q}$) production is $\sigma \left(\mathrm{tq}+\overline{\mathrm{t}}\mathrm{q}\right)={25.5}_{-3.5}^{+3.6}{\left(\mathrm{stat}\right)}_{-3.9}^{+4.2}\left(\mathrm{syst}\right)\pm 0.5\left(\mathrm{lumi}\right)$ pb. The individual cross sections are measured to be $\sigma \left(\mathrm{tq}\right)={17.7}_{-2.7}^{+2.9}{\left(\mathrm{stat}\right)}_{-2.4}^{+2.6}\left(\mathrm{syst}\right)\pm 0.3\left(\mathrm{lumi}\right)$ pb and $\sigma \left(\overline{\mathrm{t}}\mathrm{q}\right)={6.7}_{-1.6}^{+2.4}{\left(\mathrm{stat}\right)}_{-2.5}^{+2.1}\left(\mathrm{syst}\right)\pm 0.1\left(\mathrm{lumi}\right)$ pb. Their ratio is measured to be ${\mathcal{R}}_{\mathrm{t}-\mathrm{ch}}={2.7}_{-0.8}^{+1.5}{\left(\mathrm{stat}\right)}_{-0.3}^{+1.2}\left(\mathrm{syst}\right)$. The absolute value of the Cabibbo-Kobayashi-Maskawa matrix element is found to be |f LV V tb | = 0.92 ± 0.09(exp) ± 0.01(theo). The measurements are in good agreement with the standard model predictions at next-to-next-to-leading order accuracy in quantum chromodynamics.

Hadron-Hadron Scattering↗

Realization of optical bistability and multistability in Landau-quantized graphene

The solution of input-output curves in an optical ring cavity containing Landau-quantized graphene is theoretically investigated taking the advantage of density-matrix method. It is found that under the action of strong magnetic and infrared laser fields, one can efficiently reduce the threshold of the onset of optical bistability (OB) at resonance condition. At non-resonance condition, we observed that graphene metamaterial can support the possibility to obtain optical multistability (OM), which is more practical in all-optical switching or coding elements. We present an analytical approach to elucidate our simulations. Due to very high infrared optical nonlinearity of graphene stemming from very unique and unusual properties of quantized Landau levels near the Dirac point, such controllability on OB and OM may provide new technological possibilities in solid state quantum information science.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

SU-G-201-15: Nomogram as an Efficient Dosimetric Verification Tool in HDR Prostate Brachytherapy

Purpose: Nomogram as a simple QA tool for HDR prostate brachytherapy treatment planning has been developed and validated clinically. Reproducibility including patient-to-patient and physician-to-physician variability was assessed. Methods: The study was performed on HDR prostate implants from physician A (n=34) and B (n=15) using different implant techniques and planning methodologies. A nomogram was implemented as an independent QA of computer-based treatment planning before plan execution. Normalized implant strength (total air kerma strength Sk*t in cGy cm{sup 2} divided by prescribed dose in cGy) was plotted as a function of PTV volume and total V100. A quadratic equation was used to fit the data with R{sup 2} denoting the model predictive power. Results: All plans showed good target coverage while OARs met the dose constraint guidelines. Vastly different implant and planning styles were reflected on conformity index (entire dose matrix V100/PTV volume, physician A implants: 1.27±0.14, physician B: 1.47±0.17) and PTV V150/PTV volume ratio (physician A: 0.34±0.09, physician B: 0.24±0.07). The quadratic model provided a better fit for the curved relationship between normalized implant strength and total V100 (or PTV volume) than a simple linear function. Unlike the normalized implant strength versus PTV volume nomogram which differed between physicians, a unique quadratic model based nomogram (Sk*t)/D=−0.0008V2+0.0542V+1.1185 (R{sup 2}=0.9977) described the dependence of normalized implant strength on total V100 over all the patients from both physicians despite two different implant and planning philosophies. Normalized implant strength - total V100 model also generated less deviant points distorting the smoothed ones with a significantly higher correlation. Conclusion: A simple and universal, excel-based nomogram was created as an independent calculation tool for HDR prostate brachytherapy. Unlike similar attempts, our nomogram is insensitive to implant style and does not rely on reproducing dose calculations using TG-43 formalism, thus making it a truly independent check.

60 APPLIED LIFE SCIENCES↗

Molecular dynamical simulation of the behavior of early precipitated stage in aging process in dilute Cu-Cr alloy

The aging behaviors of Cu-Cr alloys in the early stage at different temperatures are investigated by molecular dynamics simulations. First principles potentials are used for the interactions between Cu and Cr atoms. The initial behavior of precipitation is characterized by transmission electron microscope and electron energy disperse spectroscopy. The results showed that Cu-Cr supersaturated solid solution is thermodynamically unstable. The mean-square displacements of the atoms are used to describe the diffusivity. At room temperature, the atoms only show harmonic vibrations near the equilibrium positions. The mutual diffusion at 873 K is different from the unidirectional diffusion in low temperatures. The calculation shows that aging process is accelerated with increasing temperature, which is not only due to the lower diffusion activation energy of Cr at higher temperature, but also because Cu atoms are also participated in the aging process. When ''aging'' at 1073 K, the precipitation of Cr element is dissolved again into Cu matrix, which is an ''over-aging'' state of Cu-Cr alloy at high temperature.

36 MATERIALS SCIENCE↗

Pseudoscalar mesons in the SU(3) linear sigma model with Gaussian functional approximation

We study the SU(3) linear sigma model for the pseudoscalar mesons in the Gaussian functional approximation (GFA). We use the SU(3) linear sigma model Lagrangian with nonet scalar and pseudoscalar mesons, including symmetry breaking terms. In the GFA, we take the Gaussian Ansatz for the ground state wave function and apply the variational method to minimize the ground state energy. We derive the gap equations for the dressed meson masses, which are actually just variational parameters in the GFA method. We use the Bethe-Salpeter equation for meson-meson scattering, which provides the masses of the physical nonet mesons. We construct the projection operators for the flavor SU(3) in order to work out the scattering T matrix in an efficient way. In this paper, we discuss the properties of the Nambu-Goldstone bosons in various limits of the chiral U{sub L}(3)xU{sub R}(3) symmetry.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Impact of kerogen heterogeneity on sorption of organic pollutants. 2. Sorption equilibria

Phenanthrene and naphthalene sorption isotherms were measured for three different series of kerogen materials using completely mixed batch reactors. Sorption isotherms were nonlinear for each sorbate-sorbent system, and the Freundlich isotherm equation fit the sorption data well. The Freundlich isotherm linearity parameter n ranged from 0.192 to 0.729 for phenanthrene and from 0.389 to 0.731 for naphthalene. The n values correlated linearly with rigidity and aromaticity of the kerogen matrix, but the single-point, organic carbon-normalized distribution coefficients varied dramatically among the tested sorbents. A dual-mode sorption equation consisting of a linear partitioning domain and a Langmuir adsorption domain adequately quantified the overall sorption equilibrium for each sorbent-sorbate system. Both models fit the data well, with r{sup 2} values of 0.965 to 0.996 for the Freundlich model and 0.963 to 0.997 for the dual-mode model for the phenanthrene sorption isotherms. The dual-mode model fitting results showed that as the rigidity and aromaticity of the kerogen matrix increased, the contribution of the linear partitioning domain to the overall sorption equilibrium decreased, whereas the contribution of the Langmuir adsorption domain increased. The present study suggested that kerogen materials found in soils and sediments should not be treated as a single, unified, carbonaceous sorbent phase.

01 COAL, LIGNITE, AND PEAT↗

Measurement of the differential cross-section of highly boosted top quarks as a function of their transverse momentum in s = 8 TeV proton-proton collisions using the ATLAS detector

The differential cross-section for pair production of top quarks with high transverse momentum is measured in 20.3 fb -1 of proton-proton collisions at a center-of-mass energy of 8 TeV. The measurement is performed for t$\bar{t}$t events in the lepton + jets channel. The cross-section is reported as a function of the hadronically decaying top quark transverse momentum for values above 300 GeV. The hadronically decaying top quark is reconstructed as an anti- k t jet with radius parameter R = 1.0 and identified with jet substructure techniques. The observed yield is corrected for detector effects to obtain a cross-section at particle level in a fiducial region close to the event selection. A parton-level cross-section extrapolated to the full phase space is also reported for top quarks with transverse momentum above 300 GeV. The predictions of a majority of next-to-leading-order and leading-order matrix-element Monte Carlo generators are found to agree with the measured cross-sections.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Nuclear deformation and neutrinoless double-{beta} decay of {sup 94,96}Zr, {sup 98,100}Mo, {sup 104}Ru, {sup 110}Pd, {sup 128,130}Te, and {sup 150}Nd nuclei within a mechanism involving neutrino mass

The ({beta}{sup -}{beta}{sup -}){sub 0{nu}} decay of {sup 94,96}Zr, {sup 98,100}Mo, {sup 104}Ru, {sup 110}Pd, {sup 128,130}Te, and {sup 150}Nd isotopes for the 0{sup +}{yields}0{sup +} transition is studied in the projected Hartree-Fock-Bogoliubov framework. In our earlier work, the reliability of HFB intrinsic wave functions participating in the {beta}{sup -}{beta}{sup -} decay of the above-mentioned nuclei has been established by obtaining an overall agreement between the theoretically calculated spectroscopic properties, namely yrast spectra, reduced B(E2:0{sup +}{yields}2{sup +}) transition probabilities, quadrupole moments Q(2{sup +}), gyromagnetic factors g(2{sup +}) as well as half-lives T{sub 1/2}{sup 2{nu}} for the 0{sup +}{yields}0{sup +} transition and the available experimental data. In the present work, we study the ({beta}{sup -}{beta}{sup -}){sub 0{nu}} decay for the 0{sup +}{yields}0{sup +} transition in a mechanism involving neutrino mass and extract limits on effective mass of light as well as heavy neutrinos from the observed half-lives T{sub 1/2}{sup 0{nu}}(0{sup +}{yields}0{sup +}) using nuclear transition matrix elements calculated with the same set of wave functions. Further, the effect of deformation on the nuclear transition matrix elements required to study the ({beta}{sup -}{beta}{sup -}){sub 0{nu}} decay in such a mass mechanism is investigated. It is noticed that the deformation effect on nuclear transition matrix elements is of approximately the same magnitude in ({beta}{sup -}{beta}{sup -}){sub 2{nu}} and ({beta}{sup -}{beta}{sup -}){sub 0{nu}} decay.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Thermoluminescence and phototransferred thermoluminescence dosimetry on mobile phone protective touchscreen glass

Thermoluminescence and phototransferred thermoluminescence measurements of protective glass from smartphones are described. Samples of Gorilla Glass were examined from nine different manufacturers and 40 different phone models. Additionally, 12 glasses believed to be original equipment manufacturer replacements, as well as three glass samples from U.S. finishers, were also studied. Altogether, 99 different Gorilla Glass samples were examined. The radiation-induced thermoluminescence signal produced glow curve shapes specific to the Gorilla Glass generations and could be used to distinguish between them. A background thermoluminescence (and phototransferred thermoluminescence) signal was found in all unirradiated samples. Its intensity and shape were found to be dependent on the Gorilla Glass generation, phone manufacturer, and phone model. The background signal was demonstrated to be produced by ultraviolet light exposure; the shape of the background signal was able to be reproduced by the combined exposure to a broad-spectrum solar simulator and a 302 nm ultraviolet light source. The background signal intensity was found to vary with the location from which it was taken on the glass. It was also found to be dependent on the depth within the Gorilla Glass due to absorption of the ultraviolet light as it traversed the medium. Removal of the glasses’ surface layers was found to be an inadequate method for removing the background signal. In some samples, the background signal intensity was large enough to significantly contribute to the total thermoluminescence (and phototransferred thermoluminescence) signal; therefore, a matrix deconvolution method was introduced to separate the background signal and radiation-induced signal. This method was found to enable dose reconstruction using the radiation-induced signal alone.

61 RADIATION PROTECTION AND DOSIMETRY↗