Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Physics regularization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,621 records · Page 90

Stark parameter dependence of the rest core charge of the emitters for multiply charged ions spectral lines

Stark width and shift simultaneous dependence on the upper level ionization potential and rest core charge of the emitter has been evaluated and discussed. It has been verified that the found relations, connecting Stark broadening parameters with upper level ionization potential and rest core charge of the emitters for particular electron temperature and density, can be used for prediction of Stark line width and shift data in case of ions for which observed data, or more detailed calculations, are not yet available. Stark widths and shifts published data are used to demonstrate the existence of other kinds of regularities within similar spectra of different elements and their ionization stages. The emphasis is on the Stark parameter dependence on the upper level ionization potential and on the rest core charge for the lines from similar spectra of multiply charged ions. The found relations connecting Stark widths and shift parameters with upper level ionization potential, rest core charge and electron temperature were used for a prediction of new Stark broadening data, thus avoiding much more complicated procedures.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Calculation of high-order harmonic generation spectrum and Floquet resonance states using the dynamical symmetry

The Floquet resonance states of a periodically driven system are obtained using a special weighted power method which forces the dynamical symmetry into regular wave propagation methods. We demonstrate the utility of this method for the calculation of high harmonic generation spectra in rare gases. By using this method the resonance Floquet state which dominates the spectrum is obtained directly at a low computational cost. This may allow the calculation of resonance Floquet states in parameter regimes not accessible before. Implementation involves only slight adjustments to the standard wave propagation codes. The method's unique advantage is explained and demonstrated.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Interaction of a finite train of short pulses with an atomic ladder system

When a train of optical pulses interacts with a medium, the time between pulses and the pulse-to-pulse phase jump have a profound effect on the outcome of the interaction. For a near-infinite train of regularly separated pulses having a constant pulse-to-pulse phase jump, as in the output of a frequency comb laser interacting with a ladder system, excitation of that system has been previously calculated and compared with experiment. In that case, the number of pulses in the train is very large, and the energy per pulse is very small. In the present work, the other extreme is experimentally examined: A small number of regularly spaced optical pulses are made to interact with a three-level ladder system in atomic rubidium. The pulses have been amplified, possibly placing the interactions into a nonperturbative regime. The experimental results are compared to a simple intuitive model and found to be in good general agreement. However, some aspects of the experimental results seem to be at odds with the simple model.

74 ATOMIC AND MOLECULAR PHYSICS↗

Kinetic Theory for Distribution Functions of Wave-Particle Interactions in Plasmas

The evolution of a charged particle distribution function under the influence of coherent electromagnetic waves in a plasma is determined from kinetic theory. For coherent waves, the dynamical phase space of particles is an inhomogeneous mix of chaotic and regular orbits. The persistence of long time correlations between the particle motion and the phase of the waves invalidates any simplifying Markovian or statistical assumptions--the basis for usual quasilinear theories. The generalized formalism in this Letter leads to a hierarchy of evolution equations for the reduced distribution function. The evolution operators, in contrast to the quasilinear theories, are time dependent and nonsingular and include the rich phase space dynamics of particles interacting with coherent waves.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

On gauge amplitudes first appearing at two loops

We study scattering amplitudes in massless non-abelian gauge theory where all outgoing gluons have positive helicity. It has been argued recently by Costello that for a particular fermion representation (8 fundamentals plus one antisymmetric-tensor representation in SU(N)) the one-loop amplitudes vanish identically. We show that this vanishing leads to previously-observed identities among one-loop color-ordered partial amplitudes. We then turn to two loops, where Costello has computed the all-plus amplitudes for this theory, as rational functions of the kinematics for any number of gluons using the celestial chiral algebra (CCA) bootstrap. We show that in dimensional regularization, these two-loop amplitudes are not rational, and they are not even finite as ϵ → 0. However, the finite remainder for four gluons agrees with the formula by Costello. In addition, we provide a mass regulator for the infrared-divergent loop integrals; with this regulator, the CCA bootstrap formula is recovered exactly. Finally, we use the CCA bootstrap to compute the double-trace terms in the theory at two loops for an arbitrary number of gluons.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Formation and annihilation of intrinsic defects induced by electronic excitation in high-purity crystalline SiO{sub 2}

Formation and thermal annihilation of intrinsic defects in {alpha}-quartz were examined using high-purity samples, while minimizing the contributions of reactions involving metallic impurities. Electronic excitation with {sup 60}Co {gamma}-rays was employed to avoid radiation-induced amorphization. The results clearly show that formation of oxygen vacancies (Si-Si bonds) as a result of decomposition of regular Si-O-Si bonds (Frenkel process) is the dominant intrinsic defect process. Compared with amorphous SiO{sub 2}, in {alpha}-quartz, the formation yield of Si-Si bonds is an order of magnitude smaller, the 7.6 eV optical absorption band is less broadened, and their thermal annihilation is complete at a lower temperature, around the {alpha}-{beta} quartz transition. In contrast, radiation-induced interstitial oxygen atoms practically do not form interstitial oxygen molecules.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

The charge conserving Poisson-Boltzmann equations: Existence, uniqueness, and maximum principle

The present article is concerned with the charge conserving Poisson-Boltzmann (CCPB) equation in high-dimensional bounded smooth domains. The CCPB equation is a Poisson-Boltzmann type of equation with nonlocal coefficients. First, under the Robin boundary condition, we get the existence of weak solutions to this equation. The main approach is variational, based on minimization of a logarithm-type energy functional. To deal with the regularity of weak solutions, we establish a maximum modulus estimate for the standard Poisson-Boltzmann (PB) equation to show that weak solutions of the CCPB equation are essentially bounded. Then the classical solutions follow from the elliptic regularity theorem. Second, a maximum principle for the CCPB equation is established. In particular, we show that in the case of global electroneutrality, the solution achieves both its maximum and minimum values at the boundary. However, in the case of global non-electroneutrality, the solution may attain its maximum value at an interior point. In addition, under certain conditions on the boundary, we show that the global non-electroneutrality implies pointwise non-electroneutrality.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Atoms confined by very thin layers

The Hamiltonian of an atom with N electrons and a fixed nucleus of infinite mass between two parallel planes is considered in the limit when the distance a between the planes tends to zero. We show that this Hamiltonian converges in the norm resolvent sense to a Schrödinger operator acting effectively in L{sup 2}(R{sup 2N}) whose potential part depends on a. Moreover, we prove that after an appropriate regularization this Schrödinger operator tends, again in the norm resolvent sense, to the Hamiltonian of a two-dimensional atom (with the three-dimensional Coulomb potential-one over distance) as a → 0. This makes possible to locate the discrete spectrum of the full Hamiltonian once we know the spectrum of the latter one. Our results also provide a mathematical justification for the interest in the two-dimensional atoms with the three-dimensional Coulomb potential.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Low secondary electron yield engineered surface for electron cloud mitigation

Secondary electron yield (SEY or δ) limits the performance of a number of devices. Particularly, in high-energy charged particle accelerators, the beam-induced electron multipacting is one of the main sources of electron cloud (e-cloud) build up on the beam path; in radio frequency wave guides, the electron multipacting limits their lifetime and causes power loss; and in detectors, the secondary electrons define the signal background and reduce the sensitivity. The best solution would be a material with a low SEY coating and for many applications δ < 1 would be sufficient. We report on an alternative surface preparation to the ones that are currently advocated. Three commonly used materials in accelerator vacuum chambers (stainless steel, copper, and aluminium) were laser processed to create a highly regular surface topography. It is shown that this treatment reduces the SEY of the copper, aluminium, and stainless steel from δ{sub max} of 1.90, 2.55, and 2.25 to 1.12, 1.45, and 1.12, respectively. The δ{sub max} further reduced to 0.76–0.78 for all three treated metals after bombardment with 500 eV electrons to a dose between 3.5 × 10{sup −3} and 2.0 × 10{sup −2} C·mm{sup −2}.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Atomic-scale friction modulated by potential corrugation in multi-layered graphene materials

Friction is an important issue that has to be carefully treated for the fabrication of graphene-based nano-scale devices. So far, the friction mechanism of graphene materials on the atomic scale has not yet been clearly presented. Here, first-principles calculations were employed to unveil the friction behaviors and their atomic-scale mechanism. We found that potential corrugations on sliding surfaces dominate the friction force and the friction anisotropy of graphene materials. Higher friction forces correspond to larger corrugations of potential energy, which are tuned by the number of graphene layers. The friction anisotropy is determined by the regular distributions of potential energy. The sliding along a fold-line path (hollow-atop-hollow) has a relatively small potential energy barrier. Thus, the linear sliding observed in macroscopic friction experiments may probably be attributed to the fold-line sliding mode on the atomic scale. These findings can also be extended to other layer-structure materials, such as molybdenum disulfide (MoS{sub 2}) and graphene-like BN sheets.

36 MATERIALS SCIENCE↗

Octet and decuplet baryon σ terms and mass decompositions

We present a comprehensive analysis of the SU(3) octet and decuplet baryon masses and σ terms using high-precision lattice QCD data and chiral SU(3) effective theory with finite range regularization. The effects of various systematic uncertainties, including from the scale setting of the lattice data and the regularization prescriptions, are quantified. We find the pion-nucleon and strange nucleon σ terms to be σ πN = 44(3)(3) MeV and σ Ns = 50(6)(1) MeV, respectively. Furthermore, the results provide constraints on the energy-momentum tensor mass decompositions of the SU(3) octet and decuplet baryons, where we find that the trace anomaly and quark-gluon energies decrease for strange baryons due to their larger strange σ terms.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

The Mechanism of Influence of Disperse Nanoparticles on Parameters of the Martensitic Transitions in Alloys with the Shape Memory Effect

Within the diffuse martensitic transition theory based on the thermodynamic and kinetic equations and relations, the mechanism of influence of disperse nanoparticles on the parameters of martensitic transitions in alloys with the shape memory effect (SME) is analyzed. The objects of the analysis are the TiNi alloy with the varied sizes of Ti{sub 3}Ni{sub 4} particle at their constant volume concentration, and the NiMnGaTb alloy with Tb precipitate particles with constant sizes and variation of volume concentration of the precipitates. Information about these alloys is available in the literature. The analysis has shown that, due to the coherent coupling of the Ti{sub 3}Ni{sub 4} particles with the substrate, the temperature width of the transition R–B19' depends on the particle sizes, which confirms the earlier established regularity of the local interior strain influence on this parameter. Concerning the NiMnGaTb alloy, the analysis has shown that, due to the presence of interior local strains associated with the Tb particles, the temperature width of the martensitic transformations increases linearly alongside the growth of the particle concentration in the alloy. The existence of the critical value of the particle concentration, above which the temperature width of the transition becomes indefinitely large, and the martensitic transformation in the alloy is blocked, is shown.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

WEC-Sim Modeling of Laminar Scientific's Patented Seesaw Wave Energy Converter: Preprint

Laminar Scientific's patented seesaw wave energy converter was modeled in WEC-Sim to predict performance. The device operates by utilizing ocean surface waves to rotate a truss in pitch about a pivot. The pivot is located at the top of two pylons, which are embedded in the seafloor. The seesaw has a float on either end, and the buoyancy forces from each float cause the system to rise or fall with passing waves. Device performance relies upon seesaw length and ocean wavelength creating an antiphase effect. The seesaw truss has an adjustable length intended to achieve this effect. The operation method enforces a narrow band of wavelengths which induce the largest rotational motion from the device. The hydrodynamic analysis of the device was performed using Capytaine, and the results confirmed that the device operates best in a narrow frequency band. Four float-to-float spacing cases and three pylon radii were examined. The hydrodynamic results indicate a match between the model and the physical expectations for the device, and that varying the pylon radii by 0.1-m increments for three instances creates minimal changes in hydrodynamic properties. Power matrices for three float spacing cases of the device were simulated with Joint North Sea Wave Project spectra waves and optimal power take-off damping in WEC-Sim. The maximum average power production for the 15-m spacing case was 14.1 kW with a 5.0-s peak wave period and 4-m significant wave heights. Plots of capture-width ratios indicated that the device performance was linear and confirmed that the device is optimal in a narrow frequency band. The maximum percentage of the available wave power produced by the 15-m device was approximately 16%. Simulations of the device in regular waves were used to produce plots of average power compared to a ratio of float spacing to wavelength. These plots indicate that the power production is maximized at a ratio of 0.5, and further confirm that the device has a narrow frequency response. The device was simulated at an example field location, where the device produced an annual average power rating of 1.6 kW given an average omnidirectional wave climate of 10.3 kW m-1 and an optimal, linearized power take-off model. While the maximum predicted device performance is reliant upon a narrow band of wave frequencies, the conducted analysis provides an opportunity to improve device design prior to prototyping and testing. Modifying the design to respond to a broader frequency range would improve device performance.

numerical modeling↗

Impurity transport in the model of a dual-porosity regularly heterogeneous medium with colloids

The problem of impurity advection in a channel surrounded by a weakly permeable medium with drifting colloidal particles present in the channel is solved. A regime in which the front of the impurity cloud moves with a constant velocity and the concentration behind the front decreases as a power law is established due to the impurity adsorption on colloids and its diffusive exchange with the matrix on moderate time scales. On long time scales, the transport in the channel is quasi-diffusive as a result of the impurity desorption and its eventual escape into the matrix.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

WO x supported on γ-Al 2 O 3 with different morphologies as model catalysts for alkanol dehydration

The distinctive morphological and surface characteristics of platelet-like γ-Al2O3 were compared to a regular, commercial γ-Al2O3. γ-Al2O3 platelets display dominant (110) surface facets and higher densities of coordinative unsaturated penta-coordinate Al3+ (Al3+penta) sites than regular γ-Al2O3, as measured by solid-state magic-angle spinning nuclear magnetic resonance spectroscopy (MAS NMR). Such Al3+penta sites are also the preferred surface anchoring sites for tungsten oxide (WOx) species consistent with NMR analysis indicating that these sites are consumed upon WOx adsorption. The higher Al3+penta density on γ-Al2O3 platelets leads to greater WOx dispersion (or smaller WOx clusters), as demonstrated by scanning transmission electron microscopy and ultraviolet–visible spectroscopy, and WOx species at intermediate WOx surface concentration are the most active for the probe reaction of 2-butanol dehydration. WOx on γ-Al2O3 platelets approaches the highest turnover rates at higher surface densities than WOx on regular γ-Al2O3, yet with similar highest rate values for both series of catalysts. This indicates that different Al2O3 supports mainly affect the dispersion of supported WOx rather than the intrinsic reactivity of individual WOx clusters with similar size.

Environmental Molecular Sciences Laboratory↗

Streaked radiography measurements of convergent ablator performance (invited)

The velocity and remaining ablator mass of an imploding capsule are critical metrics for assessing the progress toward ignition of an inertially confined fusion experiment. These and other ablator rocket parameters have been measured using a single streaked x-ray radiograph. A regularization technique has been used to determine the ablator density profile {rho}(r) at each time step; moments of {rho}(r) then provide the areal density, average radius, and mass of the unablated, or remaining, ablator material, with the velocity determined from the time derivative of the average radius. The technique has been implemented on experiments at the OMEGA laser facility.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Observation of a high-energy tail in ion energy distribution in the cylindrical Hall thruster plasma

A novel method is presented to determine populations and ion energy distribution functions (IEDFs) of individual ion species having different charge states in an ion beam from the measured spectrum of an E × B probe. The inversion of the problem is performed by adopting the iterative Tikhonov regularization method with the characteristic matrices obtained from the calculated ion trajectories. In a cylindrical Hall thruster plasma, an excellent agreement is observed between the IEDFs by an E × B probe and those by a retarding potential analyzer. The existence of a high-energy tail in the IEDF is found to be mainly due to singly charged Xe ions, and is interpreted in terms of non-linear ion acceleration.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗