Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Parameter estimation using data”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,621 records · Page 90

Pragmatic Uncertainty Quantification and Propagation in Inverse Estimation of Structural Dynamics Parameters given Material Property Uncertainties and Limited Sensor Data

In this report we demonstrate some relatively simple and inexpensive methods to effectively account for various sources of epistemic lack-of-knowledge type uncertainty in inverse problems. The demonstration problem involves inverse estimation of six parameters of a bolted joint that attaches a kettlebell shaped object to a thick plate. The parameters are efficiently inverted in a modal-based model calibration using gradient-based optimization. Two material properties of the kettlebell are treated as uncertain to within given epistemic uncertainty bounds. We apply and test interval and sparse-sample probabilistic approaches to account for uncertainty in the estimated parameters (and various scalar functionals of the parameters as generic quantities of interest, QOIs) due to uncertainties in the material properties. We also investigate the error effects of limited numbers of vibration sensors (accelerometers) on the kettlebell and plate, and therefore abbreviated excitation/response information in the parameter inversions. We propose and demonstrate a Leave-K-Sensors-Out “cross-prediction” UQ approach to estimate related uncertainties on the parameters and QOI functionals. We indicate how uncertainties from material properties and limited sensors are treated in a combined manner. The economical combined UQ approach involves just three to five samples (i.e. three to five inverse simulations), with no added complication or error/uncertainty from use of surrogate models for affordability. Finally, we describe a related economical UQ approach for handling potential parameter solution non-uniqueness and numerical optimization related precision uncertainties in the estimated parameter values. Indicated further research is identified.

36 MATERIALS SCIENCE↗

End-to-End Differentiable Modeling and Management of the Environment

Focal Area: (2) Data acquisition and assimilation enabled by machine learning, AI, and advanced methods including experimental/network design/optimization. We emphasize the importance of leveraging optimization techniques from AI/machine learning (ML) to solve challenging problems in Earth system modeling. Science Challenge: Automatic differentiation has had a transformative effect on ML by allowing the calculation of gradients of arbitrary functions in an incredibly large class of models. We can potentially realize similar improvements in parameter estimation and control for Earth system models (ESMs) by reimplementing them in computational frameworks from ML. Practitioners working with large (>10 7 parameters) models in ML and AI can obtain good predictive performance in a range of spatiotemporal tasks by making use of optimization via stochastic gradient descent and incorporating prior knowledge at multiple levels. We propose writing ESMs in open-source computational frameworks such as Torch, Tensorflow, and JAX to greatly expand the scope of environmental forecasting and management challenges, which can be addressed by leveraging automatic differentiation and gradient descent-like algorithms. We do not call for a wholesale replacement of physical models with data-driven surrogates, but rather advocate for interleaving physical and empirical equations in a manner that is most faithful to the extent of our scientific knowledge and observational data. Central to this topic is the merging of differentiable physical simulations with differentiable optimization layers, which are now both beginning to come to the forefront.

54 ENVIRONMENTAL SCIENCES↗

Forecasting Multi-Wave Epidemics Through Bayesian Inference

We present a simple, near-real-time Bayesian method to infer and forecast a multiwave outbreak, and demonstrate it on the COVID-19 pandemic. The approach uses timely epidemiological data that has been widely available for COVID-19. It provides short-term forecasts of the outbreak’s evolution, which can then be used for medical resource planning. The method postulates one- and multiwave infection models, which are convolved with the incubation-period distribution to yield competing disease models. The disease models’ parameters are estimated via Markov chain Monte Carlo sampling and information-theoretic criteria are used to select between them for use in forecasting. The method is demonstrated on two- and three-wave COVID-19 outbreaks in California, New Mexico and Florida, as observed during Summer-Winter 2020. We find that the method is robust to noise, provides useful forecasts (along with uncertainty bounds) and that it reliably detected when the initial single-wave COVID-19 outbreaks transformed into successive surges as containment efforts in these states failed by the end of Spring 2020.

59 BASIC BIOLOGICAL SCIENCES↗

Linking pyrometry to porosity in additively manufactured metals

Porosity in additively manufactured metals can reduce material strength which is generally considered undesirable. Although studies have shown relationships between process parameters and porosity, monitoring strategies for defect detection and pore formation are still needed. In this paper, instantaneous anomalous conditions are detected in-situ via pyrometry during laser powder bed fusion additive manufacturing and correlated with voids observed using post-build micro-computed tomography. Large two-color pyrometry data sets were used to estimate instantaneous temperatures, melt pool orientations and aspect ratios. Machine learning algorithms were then applied to processed pyrometry data to detect outlier images and conditions. It is shown that melt pool outliers are good predictors of voids observed post-build. With this approach, real time process monitoring can be incorporated into systems to detect defect and void formation. Alternatively, using the methodology presented here, pyrometry data can be post processed for porosity assessment.

36 MATERIALS SCIENCE↗

Extended real-time voltage instability identification method based on synchronized phasor measurements

This paper presents an extended adaptive approach designed to accurately estimate the Thévenin equivalent parameters using phasor measurements at a given bus for measurements lying in any of four quadrants of the PQ-plane. The improvement is achieved by using a new condition to properly update the estimated parameters after an initial guess. Based on an adaptive philosophy, the proposed approach can correctly account for the intrinsic nonlinearities of a power system, can provide a real-time estimation of Thévenin parameters, and does not require network topology knowledge. The method is validated using the Kundur 2-area system, showing estimation improvements compared to the current adaptive approach and the classical recursive least-squares method. The proposed approach is able to estimate both sides of the system with respect to the measurement bus. In addition, a data-driven voltage stability index is developed. To illustrate the performance of the proposed approach in a larger power system, a voltage stability assessment is carried out on the IEEE 39-bus system, considering the action of overexcitation limiters of generators and nonlinear loads. The proposed approach is suitable for applications that require an accurate Thévenin equivalent estimation in real-time, such as for voltage stability assessment. The new approach provides a reliable tool for the system operators to make proper and timely decisions.

42 ENGINEERING↗

Evaluation of clear-sky and satellite-derived irradiance data for determining the degradation of photovoltaic system performance

Knowing the degradation in performance of a photovoltaic (PV) system over time is important for estimating the lifetime energy produced and the financial return. A key parameter for normalizing performance and determining degradation is the plane-of-array (POA) irradiance. Because accurate long-term POA measurements are not always readily available, three methods of providing irradiance data for determining the degradation rate of PV systems were evaluated—a method using irradiance data modeled with the Ineichen clear-sky model and monthly Linke turbidity coefficients, a method using the supplemental clear-sky irradiance data from the National Solar Radiation Data Base (NSRDB), and a method using the NSRDB solar irradiance data for both cloudy and clear-sky conditions (all-sky). The irradiance data from the three methods were evaluated using measured irradiance data from 1998 through 2018 for the seven-station SURFRAD network and for 3-, 5-, and 10-year periods that might be used for evaluating PV system performance. Only the two clear-sky methods for the 10-year periods had less uncertainty with respect to determining PV system degradation than the expected median degradation rate for PV systems of -0.5%/year to -0.6%/year. Shorter periods and the all-sky method had larger uncertainties, making their use questionable for determining the degradation rates of PV systems.

14 SOLAR ENERGY↗

Estimation of Interfacial Tension between Organic Liquid Mixtures and Water

Knowledge of IFT values for chemical mixtures helps guide the design and analysis of various processes, including NAPL remediation with surfactants or alcohol flushing, enhanced oil recovery, and chemical separation technologies, yet available literature values are sparse. A comprehensive comparison of thermodynamic and empirical models for estimating interfacial tension (IFT) of organic chemical mixtures with water is conducted, mainly focusing on chlorinated organic compounds for 14 ternary, three quaternary, and one quinary systems. Emphasis is placed on novel results for systems with three and four organic chemical compounds, and for systems with composite organic compounds like lard oil and mineral oil. Seven models are evaluated: the ideal and nonideal monolayer models (MLID and MLNID), the ideal and nonideal mutual solubility models (MSID and MSNID), an empirical model for ternary systems (EM), a linear mixing model based on mole fractions (LMMM), and a newly developed linear mixing model based on volume fractions of organic mixtures (LMMV) for higher order systems. The two ideal models (MLID and MSID) fit ternary systems of chlorinated organic compounds without surface active compounds relatively well. However, both ideal models did not perform well for the mixtures containing a surface active compound. However, for these systems, both the MLNID and MSNID models matched the IFT data well. It is shown that the MLNID model with a surface coverage value (0.00341 mmol/m2) obtained in this study can practically be used for chlorinated organic compounds. The LMMM results in poorer estimates of the IFT as the difference in IFT values of individual organic compounds in a mixture increases. The EM, with two fitting parameters, provided accurate results for all 14 ternary systems including composite organic compounds. The new LMMV method for quaternary and higher component systems was successfully tested. This study shows that the LMMV may be able to be used for higher component systems and it can be easily incorporated into compositional multiphase flow models using only parameters from ternary systems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Geochemistry of clathrate-derived methane in Arctic Ocean waters

Alterations to the composition of seawater are estimated for microbial oxidation of methane from large polar clathrate destabilizations, which may arise in the coming century. Gas fluxes are taken from porous flow models of warming Arctic sediment. Plume spread parameters are then used to bracket the volume of dilution. Consumption stoichiometries for the marine methanotrophs are based on growth efficiency and elemental/enzyme composition data. The nutritional demand implied by extra CH{sub 4} removal is compared with supply in various high latitude water masses. For emissions sized to fit the shelf break, reaction potential begins at one hundred micromolar and falls to order ten a thousand kilometers downstream. Oxygen loss and carbon dioxide production are sufficient respectively to hypoxify and acidify poorly ventilated basins. Nitrogen and the monooxygenase transition metals may be depleted in some locations as well. Deprivation is implied relative to existing ecosystems, along with dispersal of the excess dissolved gas. Physical uncertainties are inherent in the clathrate abundance, patch size, outflow buoyancy and mixing rate. Microbial ecology is even less defined but may involve nutrient recycling and anaerobic oxidizers.

54 ENVIRONMENTAL SCIENCES↗

The Atacama Cosmology Telescope: DR6 power spectrum foreground model and validation

We discuss the model of astrophysical emission at millimeter wavelengths used to characterize foregrounds in the multi-frequency power spectra of the Atacama Cosmology Telescope (ACT) Data Release 6 (DR6), expanding on Louis et al. (2025) (2503.14452). We detail several tests to validate the capability of the DR6 parametric foreground model to describe current observations and complex simulations, and show that cosmological parameter constraints are robust against model extensions and variations. We demonstrate consistency of the model with pre-DR6 ACT data and observations from Planck and the South Pole Telescope. We evaluate the implications of using different foreground templates and extending the model with new components and/or free parameters. In all scenarios, the DR6 ΛCDM and ΛCDM+N eff cosmological parameters shift by less than 0.5σ relative to the baseline constraints. Some foreground parameters shift more; we estimate their systematic uncertainties associated with modeling choices. From our constraint on the kinematic Sunyaev-Zel'dovich power, we obtain a conservative limit on the duration of reionization of Δz rei < 4.4, assuming a reionization midpoint consistent with optical depth measurements and a minimal low-redshift contribution, with varying assumptions for this component leading to tighter limits. Finally, we analyze realistic non-Gaussian, correlated microwave sky simulations containing Galactic and extragalactic foreground fields, built independently of the DR6 parametric foreground model. Processing these simulations through the DR6 power spectrum and likelihood pipeline, we recover the input cosmological parameters of the underlying cosmic microwave background field, a new demonstration for small-scale CMB analysis. These tests validate the robustness of the ACT DR6 foreground model and cosmological parameter constraints.

CMBR experiments↗

SU-E-I-25: Determining Tube Current, Tube Voltage and Pitch Suitable for Low- Dose Lung Screening CT

Purpose: The quality of a computed tomography (CT) image and the dose delivered during its acquisition depend upon the acquisition parameters used. Tube current, tube voltage, and pitch are acquisition parameters that potentially affect image quality and dose. This study investigated physicians' abilities to characterize small, solid nodules in low-dose CT images for combinations of current, voltage and pitch, for three CT scanner models. Methods: Lung CT images was acquired of a Data Spectrum anthropomorphic torso phantom with various combinations of pitch, tube current, and tube voltage; this phantom was used because acrylic beads of various sizes could be placed within the lung compartments to simulate nodules. The phantom was imaged on two 16-slice scanners and a 64-slice scanner. The acquisition parameters spanned a range of estimated CTDI levels; the CTDI estimates from the acquisition software were verified by measurement. Several experienced radiologists viewed the phantom lung CT images and noted nodule location, size and shape, as well as the acceptability of overall image quality. Results: Image quality for assessment of nodules was deemed unsatisfactory for all scanners at 80 kV (any tube current) and at 35 mA (any tube voltage). Tube current of 50 mA or more at 120 kV resulted in similar assessments from all three scanners. Physician-measured sphere diameters were closer to actual diameters for larger spheres, higher tube current, and higher kV. Pitch influenced size measurements less for larger spheres than for smaller spheres. CTDI was typically overestimated by the scanner software compared to measurement. Conclusion: Based on this survey of acquisition parameters, a low-dose CT protocol of 120 kV, 50 mA, and pitch of 1.4 is recommended to balance patient dose and acceptable image quality. For three models of scanners, this protocol resulted in estimated CTDIs from 2.9–3.6 mGy.

60 APPLIED LIFE SCIENCES↗

Production of delta isobars on tantalum nuclei in CTa collisions at a projectile momentum of 4.2 GeV/c per nucleon

A procedure that relies on analyzing the angle between the momenta of the proton and the pion originating from CTa interaction at a projectile momentum of 4.2 GeV/c per nucleon was used to investigate for the first time the production of {Delta}{sup 0} and {Delta}{sup ++} resonances in such interactions and to determine their parameters. The criterion of stability in the parameter a characterizing the background contribution was presented for the first time and was used to reconstruct the mass distributions of {Delta}{sup 0} and {Delta}{sup ++} resonances. The contributions of {Delta}{sup 0}- and {Delta}{sup ++}-resonance decays to the production of charged pions were estimated. The results of this study are compared with similar data obtained by using the analogous procedure for {Delta}{sup 0} and {Delta}{sup ++} resonances produced on carbon nuclei in CC and {sup 4}HeC collisions at a projectile momentum of 4.2 GeV/c per nucleon and in {pi}{sup -12}C interactions at a projectile momentum of 40 GeV/c.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Influence of Size Effects on the Electronic Structure of Hexagonal Gallium Telluride

Using methods of the density functional theory, the electronic band structure of a hexagonal modification of the layered GaTe semiconductor has been calculated. The structural parameters of a bulk crystal with the β-polytype symmetry have been determined taking into account van der Waals interactions and agree with experimental data for polycrystalline films within 2%. Estimates for the position of extrema of the upper valence band and the lower conduction band have been obtained with respect to the vacuum level for bulk β-GaTe and for ultrathin plates with the number of elementary layers ranging from 1 to 10, which corresponds to a thickness range of 0.5–8 nm. The calculations demonstrate that hexagonal GaTe is an indirect band gap semiconductor with a forbidden band width varying from 0.8 eV in the bulk material to 2.3 eV in the monolayer.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Lg-Wave Cross Correlation and Epicentral Double-Difference Location in and near China

In this paper, we perform epicentral relocations for a broad area using cross-correlation measurements made on Lg waves recorded at regional distances on a sparse station network. Using a two-step procedure (pairwise locations and cluster locations), we obtain final locations for 5623 events—3689 for all of China from 1985 to 2005 and 1934 for the Wenchuan area from May to August 2008. These high-quality locations comprise 20% of a starting catalog for all of China and 25% of a catalog for Wenchuan. Of the 1934 events located for Wenchuan, 1662 (86%) were newly detected. The final locations explain the residuals 89 times better than the catalog locations for all of China (3.7302–0.0417 s) and 32 times better than the catalog locations for Wenchuan (0.8413–0.0267 s). The average semimajor axes of the 95% confidence ellipses are 420 m for all of China and 370 m for Wenchuan. The average azimuthal gaps are 205° for all of China and 266° for Wenchuan. 98% of the station distances for all of China are over 200 km. The mean and maximum station distances are 898 and 2174 km. The robustness of our location estimates and various trade-offs and sensitivities is explored with different inversion parameters for the location, such as starting locations for iterative solutions and which singular values to include. Finally, our results provide order-of-magnitude improvements in locations for event clusters, using waveforms from a very sparse far-regional network for which data are openly available.

58 GEOSCIENCES↗

System Study: Residual Heat Removal 1998-2022

This report presents an unreliability evaluation of the residual heat removal (RHR) system in two modes of operation (low-pressure injection in response to a large loss-of-coolant accident and in response to post-trip shutdown cooling) at 93 U.S. commercial operating nuclear reactors. New Standardized Plant Analysis Risk (SPAR) models with the most recent SPAR parameter update results were used in this report. Demand, run hour, and failure data from 1998–2022 for selected components were obtained from the Institute of Nuclear Power Operations (INPO) Industry Reporting and Information System (IRIS), formerly the INPO Consolidated Events Database. The unreliability results are trended for the most recent 10-year period while yearly estimates for system unreliability are provided for the entire active period. No statistically significant increasing or decreasing trends were identified in the RHR results.

99 GENERAL AND MISCELLANEOUS↗

Investigating Camera Calibration Methods for Naturalistic Driving Studies

Naturalistic driving studies typically utilize a variety of sensors, including radar, kinematic sensors, and video cameras. While the main objective of such sensors is typically safety focused, with a goal of recording accidents and near accidents for later review, the instrumentation provides a valuable resource for a variety of transportation research. Some applications, however, require additional processing to improve the utility of the data. In this work, we describe a computer vision procedure for calibrating front view cameras for the Second Strategic Highway Research Project. A longitudinal stability study of the estimated parameters across a small sample set of cameras is presented along with a proposed procedure for calibrating a larger number of cameras from the study. A simple use case is presented as one example of the utility of this work. Finally, we discuss plans for calibrating the complete set of approximately 3000 cameras from this study.

Paone, Jeffrey R.↗

Analysis of the Amplitude of the Sunyaev–Zel’dovich Effect out to Redshift z = 0.8

The interaction of the cosmic microwave background (CMB) with the hot gas in clusters of galaxies, the so-called Sunyaev–Zel’dovich (SZ) effect, is a very useful tool that allows us to determine the physical conditions in such clusters and fundamental parameters of the cosmological models. In this work, we determine the dependence of the SZ surface brightness amplitude with redshift and mass of the clusters. We have used PLANCK+IRAS data in the microwave-far-infrared and a catalog with ≳10{sup 5} clusters of galaxies extracted from the SDSS by Wen et al. We estimate and subtract the dust emission from those clusters. From the residual flux, we extract its SZ flux densities. The absolute value of the SZ amplitude indicates that the gas mass is around 10% of the total mass for cluster masses of M∼10{sup 14} M{sub ⊙}. This amplitude is compatible with no evolution with redshift and proportional to M{sup 2.70±0.37} (using X-ray derived masses) or M{sup 2.51±0.38} (using weak-lensing derived masses), with some tension regarding the expectations of the self-similar dependence (amplitude proportional to M{sup 5/3}). Other secondary products of our analysis include that clusters have a dust emission with emissivity index β∼2 and temperature T∼25 K; we confirm that the CMB temperature agrees with a dependence of T{sub 0}(1+z) with clusters of much lower mass than those explored previously; and we find that the cluster masses derived by Wen et al. from a richness-mass relationship are biased by a factor of (1+z){sup −1.8} with respect to the X-ray and weak-lensing measurements.

79 ASTRONOMY AND ASTROPHYSICS↗

Fracture mechanics approach to estimate fatigue lives of welded lap-shear specimens

A full range of stress intensity factor solutions for a kinked crack with finite length is developed as a function of weld width and the sheet thickness. When used with the main crack solutions (global stress intensity factors) in terms of the applied load and the specimen geometric parameters, the fatigue lived of the kinked crack can be estimated for the laser-welded lap-shear specimens. The predicted curve for the load range-fatigue life passes through the cluster of experimental data and is in good agreement. A classical solution associated with an infinitesimal kink is also employed. Furthermore, its life prediction tends to overestimate the actual fatigue life. In addition, the traditional fatigue life estimation based on structural stress is performed for completeness. As a result, this non-fracture mechanics approach only agrees well with the experimental data under high cyclic load conditions.

42 ENGINEERING↗

Estimation and Identification of Time-Varying Long-Term Fading Channels via the Particle Filter and the EM Algorithm

In this paper, we are concerned with the estimation and identification of time-varying wireless long-term fading channels. The dynamics of the fading channels are captured using a mean-reverting linear stochastic differential equation driven by a Brownian motion. Recursive estimation and identification algorithms solely from received signal strength data are developed. These algorithms are based on combining the particle filter (PF) with the expectation maximization (EM) algorithm that estimate and identify the power path-loss of the channel and its parameters, respectively. Numerical results are provided to evaluate the accuracy of the proposed algorithms.

99 GENERAL AND MISCELLANEOUS↗