Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “PHOSPHORUS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,621 records · Page 90

Gallium hole traps in irradiated KTiOPO{sub 4}:Ga crystals

Nominally pure and gallium doped single crystals of potassium titanyl phosphate (KTiOPO{sub 4}) have been studied by Electron Paramagnetic Resonance at low temperatures before and after irradiation. Irradiation with 20 MeV electrons performed at room temperature and liquid nitrogen temperature caused an appearance of electrons and holes. Gallium impurities act as hole traps in KTiOPO{sub 4} creating Ga{sup 4+} centers. Two different Ga{sup 4+} centers were observed, Ga1 and Ga2. The Ga1 centers are dominant in Ga-doped samples. For the Ga1 center, a superhyperfine structure with one nucleus with nuclear spin ½ was registered and attributed to the interaction of gallium electrons with a phosphorus nucleus or proton in its surrounding. In both Ga1 and Ga2 centers, Ga{sup 4+} ions substitute for Ti{sup 4+} ions, but with a preference to one of two electrically distinct crystallographic positions (site selective substitution). The Ga doping eliminates one of the shortcomings of KTP crystals—ionic conductivity of bulk crystals. However, this does not improve significantly the resistance of the crystals to electron and γ-radiation.

36 MATERIALS SCIENCE↗

Pt silicide/poly-Si Schottky diodes as temperature sensors for bolometers

Platinum silicide Schottky diodes formed on films of polycrystalline Si doped by phosphorus are demonstrated to be efficient and manufacturable CMOS-compatible temperature sensors for microbolometer detectors of radiation. Thin-film platinum silicide/poly-Si diodes have been produced by a CMOS-compatible process on artificial Si{sub 3}N{sub 4}/SiO{sub 2}/Si(001) substrates simulating the bolometer cells. Layer structure and phase composition of the original Pt/poly-Si films and the Pt silicide/poly-Si films synthesized by a low-temperature process have been studied by means of the scanning transmission electron microscopy; they have also been explored by means of the two-wavelength X-ray structural phase analysis and the X-ray photoelectron spectroscopy. Temperature coefficient of voltage for the forward current of a single diode is shown to reach the value of about −2%/ °C in the temperature interval from 25 to 50 °C.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Figure correction of a metallic ellipsoidal neutron focusing mirror

An increasing number of neutron focusing mirrors is being adopted in neutron scattering experiments in order to provide high fluxes at sample positions, reduce measurement time, and/or increase statistical reliability. To realize a small focusing spot and high beam intensity, mirrors with both high form accuracy and low surface roughness are required. To achieve this, we propose a new figure correction technique to fabricate a two-dimensional neutron focusing mirror made with electroless nickel-phosphorus (NiP) by effectively combining ultraprecision shaper cutting and fine polishing. An arc envelope shaper cutting method is introduced to generate high form accuracy, while a fine polishing method, in which the material is removed effectively without losing profile accuracy, is developed to reduce the surface roughness of the mirror. High form accuracy in the minor-axis and the major-axis is obtained through tool profile error compensation and corrective polishing, respectively, and low surface roughness is acquired under a low polishing load. As a result, an ellipsoidal neutron focusing mirror is successfully fabricated with high form accuracy of 0.5 μm peak-to-valley and low surface roughness of 0.2 nm root-mean-square.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Passivation of c-Si surfaces by sub-nm amorphous silicon capped with silicon nitride

A sub-nm hydrogenated amorphous silicon (a-Si:H) film capped with silicon nitride (SiN{sub x}) is shown to provide a high level passivation to crystalline silicon (c-Si) surfaces. When passivated by a 0.8 nm a-Si:H/75 nm SiN{sub x} stack, recombination current density J{sub 0} values of 9, 11, 47, and 87 fA/cm{sup 2} are obtained on 10 Ω·cm n-type, 0.8 Ω·cm p-type, 160 Ω/sq phosphorus-diffused, and 120 Ω/sq boron-diffused silicon surfaces, respectively. The J{sub 0} on n-type 10 Ω·cm wafers is further reduced to 2.5 ± 0.5 fA/cm{sup 2} when the a-Si:H film thickness exceeds 2.5 nm. The passivation by the sub-nm a-Si:H/SiN{sub x} stack is thermally stable at 400 °C in N{sub 2} for 60 min on all four c-Si surfaces. Capacitance–voltage measurements reveal a reduction in interface defect density and film charge density with an increase in a-Si:H thickness. The nearly transparent sub-nm a-Si:H/SiN{sub x} stack is thus demonstrated to be a promising surface passivation and antireflection coating suitable for all types of surfaces encountered in high efficiency c-Si solar cells.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Synchrotron-based investigation of transition-metal getterability in n-type multicrystalline silicon

Solar cells based on n-type multicrystalline silicon (mc-Si) wafers are a promising path to reduce the cost per kWh of photovoltaics; however, the full potential of the material and how to optimally process it are still unknown. Process optimization requires knowledge of the response of the metal-silicide precipitate distribution to processing, which has yet to be directly measured and quantified. To supply this missing piece, we use synchrotron-based micro-X-ray fluorescence (μ-XRF) to quantitatively map >250 metal-rich particles in n-type mc-Si wafers before and after phosphorus diffusion gettering (PDG). We find that 820°C PDG is sufficient to remove precipitates of fast-diffusing impurities and that 920°C PDG can eliminate precipitated Fe to below the detection limit of μ-XRF. Thus, the evolution of precipitated metal impurities during PDG is observed to be similar for n- and p-type mc-Si, an observation consistent with calculations of the driving forces for precipitate dissolution and segregation gettering. Measurements show that minority-carrier lifetime increases with increasing precipitate dissolution from 820°C to 880°C PDG, and that the lifetime after PDG at 920°C is between the lifetimes achieved after 820°C and 880°C PDG.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Two dimensional WS{sub 2} lateral heterojunctions by strain modulation

“Strain engineering” has been widely used to tailor the physical properties of layered materials, like graphene, black phosphorus, and transition-metal dichalcogenides. Here, we exploit thermal strain engineering to construct two dimensional (2D) WS{sub 2} in-plane heterojunctions. Kelvin probe force microscopy is used to investigate the surface potentials and work functions of few-layer WS{sub 2} flakes, which are grown on SiO{sub 2}/Si substrates by chemical vapor deposition, followed by a fast cooling process. In the interior regions of strained WS{sub 2} flakes, work functions are found to be much larger than that of the unstrained regions. The difference in work functions, together with the variation of band gaps, endows the formation of heterojunctions in the boundaries between inner and outer domains of WS{sub 2} flakes. This result reveals that the existence of strain offers a unique opportunity to modulate the electronic properties of 2D materials and construct 2D lateral heterojunctions.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Spatial luminescence imaging of dopant incorporation in CdTe Films

State-of-the-art cathodoluminescence (CL) spectrum imaging with spectrum-per-pixel CL emission mapping is applied to spatially profile how dopant elements are incorporated into Cadmium telluride (CdTe). Emission spectra and intensity monitor the spatial distribution of additional charge carriers through characteristic variations in the CL emission based on computational modeling. Our results show that grain boundaries play a role in incorporating dopants in CdTe exposed to copper, phosphorus, and intrinsic point defects in CdTe. Furthermore, the image analysis provides critical, unique feedback to understand dopant incorporation and activation in the inhomogeneous CdTe material, which has struggled to reach high levels of hole density.

14 SOLAR ENERGY↗

Multi-frequency spin manipulation using rapidly tunable superconducting coplanar waveguide microresonators

In this work, we demonstrate the use of frequency-tunable superconducting NbTiN coplanar waveguide microresonators for multi-frequency pulsed electron spin resonance (ESR) experiments. By applying a bias current to the center pin, the resonance frequency (~7.6 GHz) can be continuously tuned by as much as 95 MHz in 270 ns without a change in the quality factor of 3000 at 2 K. We demonstrate the ESR performance of our resonators by measuring donor spin ensembles in silicon and show that adiabatic pulses can be used to overcome magnetic field inhomogeneities and microwave power limitations due to the applied bias current. We take advantage of the rapid tunability of these resonators to manipulate both phosphorus and arsenic spins in a single pulse sequence, demonstrating pulsed double electron-electron resonance. Our NbTiN resonator design is useful for multi-frequency pulsed ESR and should also have applications in experiments where spin ensembles are used as quantum memories.

42 ENGINEERING↗

p-type doping efficiency in CdTe: Influence of second phase formation

Cadmium telluride (CdTe) high purity, bulk, crystal ingots doped with phosphorus were grown by the vertical Bridgman melt growth technique to understand and improve dopant solubility and activation. We report that large net carrier densities have been reproducibly obtained from as-grown ingots, indicating successful incorporation of dopants into the lattice. However, net carrier density values are orders of magnitude lower than the solubility of P in CdTe as reported in literature, 10 18 /cm 3 to 10 19 /cm 3 [J. H. Greenberg, J. Cryst. Growth 161, 1–11 (1996) and R. B. Hall and H. H. Woodbury, J. Appl. Phys. 39(12), 5361–5365 (1968)], despite comparable starting charge dopant densities. Growth conditions, such as melt stoichiometry and post growth cooling, are shown to have significant impacts on dopant solubility. This study demonstrates that a significant portion of the dopant becomes incorporated into second phase defects as compounds of cadmium and phosphorous, such as cadmium phosphide, which inhibits dopant incorporation into the lattice and limits maximum attainable net carrier density in bulk crystals. In this paper, we present an extensive study on the characteristics of these second phase defects in relation to their composition and formation kinetics while providing a pathway to minimize their formation and enhance solubility.

36 MATERIALS SCIENCE↗

Recombination activity of grain boundaries in high-performance multicrystalline Si during solar cell processing

Here in this work, we applied internal quantum efficiency mapping to study the recombination activity of grain boundaries in High Performance Multicrystalline Silicon under different processing conditions. Wafers were divided into groups and underwent different thermal processing, consisting of phosphorus diffusion gettering and surface passivation with hydrogen rich layers. After these thermal treatments, wafers were processed into heterojunction with intrinsic thin layer solar cells. Light Beam Induced Current and Electron Backscatter Diffraction were applied to analyse the influence of thermal treatment during standard solar cell processing on different types of grain boundaries. The results show that after cell processing, most random-angle grain boundaries in the material are well passivated, but small-angle grain boundaries are not well passivated. Special cases of coincidence site lattice grain boundaries with high recombination activity are also found. Based on micro-X-ray fluorescence measurements, a change in the contamination level is suggested as the reason behind their increased activity. Published by AIP Publishing.

36 MATERIALS SCIENCE↗

Beyond Graphene: Low-Symmetry and Anisotropic 2D Materials

Low-symmetry 2D materials—such as ReS 2 and ReSe 2 monolayers, black phosphorus monolayers, group-IV monochalcogenide monolayers, borophene, among others—have more complex atomistic structures than the honeycomb lattices of graphene, hexagonal boron nitride, and transition metal dichalcogenides. The reduced symmetries of these emerging materials give rise to inhomogeneous electron, optical, valley, and spin responses, as well as entirely new properties such as ferroelasticity, ferroelectricity, magnetism, spin-wave phenomena, large nonlinear optical properties, photogalvanic effects, and superconductivity. Novel electronic topological properties, nonlinear elastic properties, and structural phase transformations can also take place due to low symmetry. Lastly, the “Beyond Graphene: Low-Symmetry and Anisotropic 2D Materials” Special Topic was assembled to highlight recent experimental and theoretical research on these emerging materials.

2D materials↗

Non-Equilibrium Doping of Poly-Si:Ga/SiOx Passivating Contacts Solar Cells

In this contribution, we show that Ga-hyperdoped poly-Si/SiOx contacts are realized by pulsed laser annealing and post-hydrogenation. The motivation behind this work is to improve the inferior performance of boron-doped poly- Si/SiOx contacts when compared to the phosphorus-doped contacts. Here we used Ga as a novel p-type dopant to replace B, as B is known to accumulate at the interface between the oxide and the crystalline silicon and cause recombination. Due to a high diffusivity of Ga in oxide and a much higher segregation coefficient (Si:SiOx), Ga is shown to be immune to the oxide pileup phenomenon. However, Ga has a low solid solubility limit in Si (5x10^19 cm-3), which is not enough to form a low resistivity contact. To overcome this problem, we explored pulsed laser annealing via excimer laser by varying the laser energy densities and pulses. The passivation and electrical properties are studied systematically using photoluminescence (PL), secondary ion mass spectrometry (SIMS), and Van der Pauw-Hall measurements. We show an active Ga doping concentration above 1x10^20 cm^-3, which is above the solid solubility limit of Ga in Si. Good passivation quality is demonstrated with the highest implied Voc (iVoc) of 721 mV on single side polished samples. Furthermore, a low diode contact resistivity of ~22 m..omega.. cm^2 is obtained using Ti/Ag contacts, with minimal metal-to-semiconductor contact resistivity of 0.9 m..omega.. cm^2.

non-equilibrium doping↗

Charge-transfer-enhanced d – d emission in antiferromagnetic NiPS3

The d electron plays a significant role in determining and controlling the properties of magnetic materials. However, the d electron transitions, especially d–d emission, have rarely been observed in magnetic materials due to the forbidden selection rules. Here, we report an observation of d–d emission in antiferromagnetic nickel phosphorus trisulfides (NiPS3) and its strong enhancement by stacking it with monolayer tungsten disulfide (WS2). We attribute the observation of the strong d–d emission enhancement to the charge transfer between NiPS3 and WS2 in the type-I heterostructure. The d–d emission peak splits into two peaks, D1 and D2, at low temperature below 150 K, from where an energy splitting due to the trigonal crystal field is measured as 105 meV. Moreover, we find that the d–d emissions in NiPS3 are nonpolarized lights, showing no dependence on the zigzag antiferromagnetic configuration. These results reveal rich fundamental information on the electronic and optical properties of emerging van der Waals antiferromagnetic NiPS3.

Physics↗

Nature of contaminants introduced in silicon wafers during molecular beam epitaxy chamber annealing

Epitaxial monolithic III–V/Si tandem solar cells are one of the most promising technologies to be adopted by the industry after the efficiency of the current market dominating single junction silicon solar cell saturates at its fundamental limit. One of the key limitations of this technology is the degradation of silicon wafers during in situ annealing in the molecular beam epitaxy chamber. Determining the nature of contaminants in this process is key to improve the efficiency of epitaxial tandem solar cells. However, to date, the nature of contaminants from molecular beam epitaxy chambers remains unknown. In this work, we use photoluminescence imaging, lifetime spectroscopy, and deep level transient spectroscopy to measure the electronic properties of extrinsic impurities incorporated during annealing in the molecular beam epitaxy chamber. Photoluminescence images reveal that at least two impurities diffuse into silicon wafers during molecular beam epitaxy annealing. One is highly localized, while the other one is distributed uniformly across the whole wafer. Phosphorus diffusion is found to confine the localized impurity within the diffused layer but is ineffective at preventing the indiffusion of other impurities. Lifetime spectroscopy shows that metastable impurities with characteristic similar to Cr and CrB in our molecular beam epitaxy annealed silicon wafers. No evidence of Fe or FeB was observed. The emission rates and concentrations of the electrically active defects were measured with deep-level transient spectroscopy: The emission rates of detected defects do not match that of known Cr-related defects.

36 MATERIALS SCIENCE↗

Generating accurate density matrices on the tangent space of a Grassmann manifold

Interpolating a density matrix from a set of known density matrices is not a trivial task. This is because a linear combination of density matrices does not necessarily correspond to another density matrix. In this Communication, density matrices are examined as objects of a Grassmann manifold. Although this manifold is not a vector space, its tangent space is a vector space. As a result, one can map the density matrices on this manifold to their corresponding vectors in the tangent space and then perform interpolations on that tangent space. The resulting interpolated vector can be mapped back to the Grassmann manifold, which can then be utilized (1) as an optimal initial guess for a self-consistent field (SCF) calculation or (2) to derive energy directly without time-consuming SCF iterations. Such a promising approach is denoted as Grassmann interpolation (G-Int). The hydrogen molecule has been used to illustrate that the described interpolated method in this work preserves the essential attributes of a density matrix. For phosphorus mononitride and ferrocene, it was demonstrated numerically that reference points for the definition of the corresponding tangent spaces can be chosen arbitrarily. In addition, the interpolated density matrices provide a superior and essentially converged initial guess for an SCF calculation to make the SCF procedure itself unnecessary. Finally, this accurate, efficient, robust, and systematically improved G-Int strategy has been used for the first time to generate highly accurate potential energy surfaces with fine details for the difficult case, ferrocene.

Chemistry↗

Inducing Fe moment in LaFeSi with p-block element substitution

We studied the LaFeSi phase using density functional theory based full-potential linearized augmented plane wave (FP-LAPW) method. Specifically we examined the effect of p-element substitution on the stability and magnetic properties focusing on pathways to induce Fe magnetic moments. We demonstrate that either partial or complete substitutions at the Si 2 c-site by several p-block elements lead to non-zero Fe moments. Our theoretical study shows that partially substituted LaFeSi 1-y Ga y and LaFeSi 1-y Al y are more thermodynamically stable than the fully substituted LaFeGa and LaFeAl. We also found that the P substitutions, either partial or complete, have the most negative formation energies, however the compounds containing phosphorus are non-magnetic. Our work highlights a pathway toward manipulations of the otherwise quenched Fe-moments in LaFeSi-related compounds and help in advancing the potential magnetic functionalities of LaFeX compounds.

36 MATERIALS SCIENCE↗

Structural basis of a histidine-DNA nicking/joining mechanism for gene transfer and promiscuous spread of antibiotic resistance

Relaxases are metal-dependent nucleases that break and join DNA for the initiation and completion of conjugative bacterial gene transfer. Conjugation is the main process through which antibiotic resistance spreads among bacteria, with multidrug-resistant staphylococci and streptococci infections posing major threats to human health. The MOB V family of relaxases accounts for approximately 85% of all relaxases found in Staphylococcus aureus isolates. Here, we present six structures of the MOB V relaxase MobM from the promiscuous plasmid pMV158 in complex with several origin of transfer DNA fragments. A combined structural, biochemical, and computational approach reveals that MobM follows a previously uncharacterized histidine/metal-dependent DNA processing mechanism, which involves the formation of a covalent phosphoramidate histidine-DNA adduct for cell-to-cell transfer. In conclusion, we discuss how the chemical features of the high-energy phosphorus-nitrogen bond shape the dominant position of MOB V histidine relaxases among small promiscuous plasmids and their preference toward Gram-positive bacteria.

59 BASIC BIOLOGICAL SCIENCES↗

The diversity and evolution of microbial dissimilatory phosphite oxidation

Significance Geochemical models of the phosphorus (P) cycle uniquely ignore microbial redox transformations. Yet phosphite is a reduced P source that has been detected in several environments at concentrations that suggest a contemporary P redox cycle. Microbial dissimilatory phosphite oxidation (DPO) converts soluble phosphite into phosphate, and a false notion of rarity has limited our understanding of its diversity and environmental distribution. Here we demonstrate that DPO is an ancient energy metabolism hosted by taxonomically diverse, autotrophic bacteria that exist globally throughout anoxic environments. DPO microorganisms are therefore likely to have provided bioavailable phosphate and fixed carbon to anoxic ecosystems throughout Earth’s history and continue to do so in contemporary environments.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗