Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Optical properties”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,621 records · Page 90

Influence of Sm2O3 addition on Judd-Ofelt parameters, thermal and optical properties of the TeO2-Li2O-ZnO-Nb2O5 glass system

Highlights: • Synthesis of Sm{sub 2}O{sub 3} doped TeO{sub 2}-Li{sub 2}O-ZnO-Nb{sub 2}O{sub 5} glass to be used in optical devices. • Area under the peak calculations of FTIR and Raman display higher presence of BOs. • DSC plots indicate high stability and high rigidity of prepared glass samples. • Judd-Ofelt analysis shows the ionic nature of Sm{sup 3+} ions with neighboring atoms. • Higher branching ratio values obtained from {sup 6}H{sub 5/2} → {sup 6}F{sub 5/2} emission transition. - Abstract: A series of transparent and light yellow color samples composed of Sm{sub 2}O{sub 3} doped tellurium oxide glasses with chemical composition 75TeO{sub 2}-5Li{sub 2}O-10ZnO-(10-X) Nb{sub 2}O{sub 5}-XSm{sub 2}O{sub 3} was prepared by conventional melt-quenching technique. Rare earth (Sm{sub 2}O{sub 3}) was added to improve all glass properties. From obtained radiative properties, the samples which prepared with above composition can be considered as a prospect application for laser design due to higher branching ratio. The physical properties including sample density, molar volume, and OPD were measured. The glassy nature is approved by XRD analysis. The structural modification of glass forming units with introducing Sm{sub 2}O{sub 3} was studied by FTIR and Raman spectra. The intensity ratio of TeO{sub 4}/TeO{sub 3} was measured to determine the ratio of bridging/non-bridging oxygen exists in glass network. Glass thermal stability, glass transition temperature, and melting temperature were obtained from DSC plots. The UV–vis-NIR absorption spectra display 9 peaks. Optical parameters including optical band gap E{sub Opt}, Urbach energy ΔE and refractive index n were determined. From absorption spectra, Judd-Ofelt intensity parameters (Ω{sub λ} and λ = 2, 4, 6) have been derived to study bonding nature. A spectroscopic quality factor was calculated. Branching ratio (β{sub r}) and lifetime (τ) have been calculated using JO parameters. Absorption and emission cross-sections were determined to measure the probability of an absorption or emission process. Finally, we propose that these prepared samples can be used in optical devices and other applications.

36 MATERIALS SCIENCE↗

Asymptotic Solutions for Optical Properties of Large Particles with Strong Absorption

For scattering calculations involving nonspherical particles such as ice crystals, we show that the transverse wave condition is not applicable to the refracted electromagnetic wave in the context of geometric optics when absorption is involved. Either the TM wave condition (i.e., where the magnetic field of the refracted wave is transverse with respect to the wave direction) or the TE wave condition (i.e., where the electric field is transverse with respect to the propagating direction of the wave) may be assumed for the refracted wave in an absorbing medium to locally satisfy the electromagnetic boundary condition in the ray tracing calculation. The wave mode assumed for the refracted wave affects both the reflection and refraction coefficients. As a result, a nonunique solution for these coefficients is derived from the electromagnetic boundary condition. In this study we have identified the appropriate solution for the Fresnel reflection/refraction coefficients in light scattering calculation based on the ray tracing technique. We present the 3 x 2 refraction or transmission matrix that completely accounts for the inhomogeneity of the refracted wave in an absorbing medium. Using the Fresnel coefficients for an absorbing medium, we derive an asymptotic solution in an analytical format for the scattering properties of a general polyhedral particle. Numerical results are presented for hexagonal plates and columns with both preferred and random orientations. The asymptotic theory can produce reasonable accuracy in the phase function calculations in the infrared window region (wavelengths near 10 micron) if the particle size (in diameter) is on the order of 40 micron or larger. However, since strong absorption is assumed in the computation of the single-scattering albedo in the asymptotic theory, the single scattering albedo does not change with variation of the particle size. As a result, the asymptotic theory can lead to substantial errors in the computation of single-scattering albedo for small and moderate particle sizes. However, from comparison of the asymptotic results with the FDTD solution, it is expected that a convergence between the FDTD results and the asymptotic theory results can be reached when the particle size approaches 200 micron. We show that the phase function at side-scattering and backscattering angles is insensitive to particle shape if the random orientation condition is assumed. However, if preferred orientations are assumed for particles, the phase function has a strong dependence on scattering azimuthal angle. The single-scattering albedo also shows very strong dependence on the inclination angle of incident radiation with respect to the rotating axis for the preferred particle orientations.

Yang, Ping↗

Correlation of Predicted and Observed Optical Properties of Multilayer Thermal Control Coatings

Thermal control coatings on spacecraft will be increasingly important, as spacecraft grow smaller and more compact. New thermal control coatings will be needed to meet the demanding requirements of next generation spacecraft. Computer programs are now available to design optical coatings and one such program was used to design several thermal control coatings consisting of alternating layers of WO3 and SiO2. The coatings were subsequently manufactured with electron beam evaporation and characterized with both optical and thermal techniques. Optical data were collected in both the visible region of the spectrum and the infrared. Predictions of solar absorptance and infrared emittance were successfully correlated to the observed thermal control properties. Functional performance of the coatings was verified in a bench top thermal vacuum chamber.

Jaworske, Donald A.↗

Optical properties of thin gold films applied to Schottky barrier solar cells

The Schottky barrier solar cell is considered a possible candidate for converting solar to electrical energy both for space and terrestrial applications. Knowledge of the optical constants of the ultrathin metal film used in the cell is essential for analyzing and designing higher efficiency Schottky barrier cells. The optical constants of 7.5 -nm (75-A) gold films on gallium arsenide have been obtained. In addition, the absolute collection efficiency of Schottky barrier solar cells has been determined from measured spectral response and optical constants of the gold film.

YEH Y. M.↗

Assessment of MODIS-Derived Visible and Near-IR Aerosol Optical Properties and their Spatial Variability in the Presence of Mineral Dust

Mineral dust aerosol is among the most difficult aerosol species to measure quantitatively from space. In this paper, we evaluate MODIS retrievals of spectral aerosol optical depth (AOD) from the visible to the near-IR off the US West Coast using measurements taken by the NASA Ames Airborne Tracking Sunphotometer, AATS-14, during the EVE (Extended-MODIS-lambda Validation Experiment, 2004) campaign in April of 2004. In EVE, a total of 35 and 49 coincident over-ocean suborbital measurements at the nominal level-2 retrieval scale of 10 km x 10 km were collected for Terra and Aqua, respectively. For MODIS-Terra about 80% of the AOD retrievals are within the estimated uncertainty, DELTA tau = plus or minus 0.03 plus or minus 0.05 tau; this is true for both the visible (here defined to include 466-855 nm) and near-IR (here defined to include 1243-2119 nm) retrievals. For MODIS-Aqua about 45% of the AOD retrievals are within DELTA tau = plus or minus 0.03 plus or minus 0.05 tau; the fraction of near-IR retrievals that fall within this uncertainty range is about 27%. We found an rms difference of 0.71 between the sunphotometer snd MODIS-Aqua estimates of the visible (553-855 nm) Angstrom exponent, while the MODIS-Terra visible Angstrom exponents show an rms difference of only 0.29 when compared to AATS. The cause of the differences in performance between MODIS-Terra and MODIS-Aqua could be instrument calibration and needs to be explored further. The spatial variability of AOD between retrieval boxes as derived by MODIS is generally larger than that indicated by the sunphotometer data.

Redemann, J.↗

Synthesis, Characterization, and Optical Properties of a Cyano-Functionalized 4,5,9,10-tetraaryl-l,6-dioxapyrene

5,10-Di(4-cyanophenyl)-4,9-di(4-methylphenyl)-1,6-dioxapyrene ( CN-diox), a symmetrically substituted 4,5,9,10-tetraaryldioxapyrene, was synthesized in seven steps from 1,4-dihydroxynaphthalene. The synthetic methodology incorporated a base-catalyzed ring-closure process followed by dehydration to introduce the first tetraaryl- 1,6-dioxapyrene. Crystal structure and electrochemical analysis were performed to directly compare the properties of CN-diox to previously reported dioxapyrene derivatives, specifically 1,6-dioxapyrene (Diox) and 4,9-diethyl-2,7-dimethyl- 1,6-dioxapyrene (Alkyl-diox). Optical spectroscopy studies were performed to evaluate the potential of the 1,6-dioxapyrenes as fluorescent probes. CN-diox revealed a broad absorption centered near 450 nm (epsilon = 31,900/M/cm) in THF with a corresponding fluorescence at 619 nm (Phi(sub f) = 0.011). This was in sharp contrast to both Diox and Alkyl-diox which displayed broad absorption bands near 400 nm (epsilon approx. 5,000-10,000/M/cm) in THF with corresponding fluorescence near 500 nm (Phi(sub f) = 0.059 and 0.082 for Diox and Alkyl-diox, respectively). The luminescence of CN-diox was found to be solvatochromic (lambda(sub max) = 619 nm-644 nm) with single exponential lifetimes of less than 1.3 ns. Neither Diox nor Alkyl-diox showed solvatochromic properties.

Tyson, Daniel S.↗

Comparison of surface-derived and ISCCP cloud optical properties

One objective of the FIRE Project is to validate the cloud parameters given on ISCCP tapes. ISCCP first defines whether or not a region is clear or has clouds based on two threshold algorithms. If the region has clouds, then a cloud optical depth is given as well as a cloud height. Special high resolution ISCCP CX tapes were created for the time period of the Wisconsin FIRE experiment. These tapes did not include the cloud height product, however, other parameters used to make up the standard ISCCP Cl products were available. The ISCCP cloud/no cloud and cloud depth parameters are compared with surface derived values for the Wisconsin FIRE region during the October 27 and 28 case study days.

Whitlock, C. H.↗

Optical properties of ITO films obtained by high-frequency magnetron sputtering with accompanying ion treatment

A variation in the properties of indium-tin-oxide (ITO) films obtained by the method of reactive magnetron sputtering with simultaneous ion treatment is reported. The ITO films feature the following parameters in the optical range of 450-1100 nm: a transmission coefficient of 80%, band gap of 3.50-3.60 eV, and a refractive index of 1.97-2.06. All characteristics of the films depend on the ion-treatment current. The latter, during the course of deposition, reduces the resistivity of the ITO films with the smallest value of the resistivity being equal to 2 Multiplication-Sign 10{sup -3} {Omega} cm. The degradation of films with a high resistivity when kept in air is observed.

36 MATERIALS SCIENCE↗

Probing the optical properties and toxicological profile of zinc tungstate nanorods

Zinc tungstate is a semiconductor known for its favorable photocatalytic, photoluminescence, and scintillation properties, coupled with its relatively low cost, reduced toxicity, and high stability in biological and catalytic environments. In particular, zinc tungstate evinces scintillation properties, namely the ability to emit visible light upon absorption of energetic radiation such as x rays, which has led to applications not only as radiation detectors but also for biomedical applications involving the delivery of optical light to deep tissue, such as photodynamic therapy and optogenetics. Here, we report on the synthesis of zinc tungstate nanorods generated via an optimized but facile method, which allows for synthetic control over the aspect ratio of the as-synthesized anisotropic motifs via rational variation of the solution pH. Additionally, we investigate the effect of aspect ratio on their resulting photoluminescent and radioluminescent properties. We further demonstrate the potential of these zinc tungstate nanorods for biomedical applications, such as photodynamic therapy for cancer treatment, by analyzing their toxicological profile within cell lines and neurons.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Interpretable ensemble learning unveils main aerosol optical properties in predicting cloud condensation nuclei number concentration

Variations in cloud condensation nuclei number concentration (N CCN ) significantly influence cloud microphysics, yet direct N CCN measurements remain challenging. Here, we present an N CCN ensemble learning (NEL) model utilizing ensemble learning and interpretability analysis on aerosol optical parameters. Validated at two land sites, two ocean sites and one polar site within the Atmospheric Radiation Measurement program, the mean absolute percentage error range of the NEL model across different environments is from 12% to 36%, demonstrating high accuracy. Key findings reveal that aerosol optical parameters can serve as predictors for N CCN . Aerosol scattering and backscattering coefficients, absorption coefficient, backscatter fraction (BSF), and Ångström exponent (AE) are positively correlated with N CCN , while single scattering albedo shows negative correlations. N CCN prediction at land sites is highly sensitive to BSF, largely driven by the backscattering coefficient, as fine particles dominate in these sites. At ocean sites, N CCN prediction is more sensitive to AE, primarily influenced by the scattering coefficient, due to the higher proportion of larger particles. At the polar site, N CCN prediction shows sensitivity to both BSF and AE, mainly driven by the scattering coefficient, as polar sites are cleaner and contain larger particles. These differences reflect the variation in particle size and number concentration across different environments.

Atmospheric science↗

Optical properties of in-vitro biomineralised silica

Silicon is the second most common element on the Earth’s crust and its oxide (SiO 2 ) the most abundant mineral. Silica and silicates are widely used in medicine and industry as well as in micro- and nano-optics and electronics. However, the fabrication of glass fibres and components requires high temperature and non-physiological conditions, in contrast to biosilica structures in animals and plants. Here, we show for the first time the use of recombinant silicatein-α, the most abundant subunit of sponge proteins catalyzing biosilicification reactions, to direct the formation of optical waveguides in-vitro through soft microlithography. The artificial biosilica fibres mimic the natural sponge spicules, exhibiting refractive index values suitable for confinement of light within waveguides, with optical losses in the range of 5–10 cm –1 , suitable for application in lab-on-chips systems. This method extends biosilicification to the controlled fabrication of optical components by physiological processing conditions, hardly addressed by conventional technologies.

59 BASIC BIOLOGICAL SCIENCES↗

Optical properties of orbital debris

This paper discusses the albedoes and phase angle effects found for 400 members of eight debris swarms using observations obtained in 1990 and 1991 with the NASA Johnson Space Center CCD-equipped portable Schmidt telescope. The mean albedo derived by comparing optical brightnesses with averaged radar cross sections (RCS's) is 10 percent. The standard deviation in log albedo is 0.40 if the RCS's are assumed to contribute equally to the scatter. The RCS's used in this work are the median values obtained by comparing data from 47 separate RCS catalog updates. Forty objects are sufficiently free of tumble or aspect angle effects to yield consistent phase function slopes. These range from specular in nature (zero slope) through Lambertian (moderate slope) to lunar (steep slope) with the mean lying midway between specular and Lambertian.

Henize, Karl G.↗

Optical properties of poly-HCN and their astronomical applications

Matthews (1992) has proposed that HCN "polymer" is ubiquitous in the solar system. We apply vacuum deposition and spectroscopic techniques previously used on synthetic organic heteropolymers (tholins), kerogens, and meteoritic organic residues to the measurement of the optical constants of poly-HCN in the wavelength range 0.05-40 micrometers. These measurements allow quantitative comparison with spectrophotometry of organic-rich bodies in the outer solar system. In a specific test of Matthews' hypothesis, poly-HCN fails to match the optical constants of the haze of the Saturnian moon, Titan, in the visible and near-infrared derived from astronomical observations and standard models of the Titan atmosphere. In contrast, a tholin produced from a simulated Titan atmosphere matches within the probable errors. Poly-HCN is much more N-rich than Titan tholin.

Optics↗