Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Multiple”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,621 records · Page 90

Annoyance due to multiple airplane noise exposure

A laboratory study was conducted to investigate the annoyance effects of multiple aircraft noise exposure in which 250 subjects judged the annoyance of half-hour periods of airplane noise simulative of typical indoor home exposures. The variables of the aircraft noise exposure were the peak noise level of flyovers, which was constant within each period, and the number of flyovers. Each subject judged 5 of the possible 25 factorial combinations of level and number. Other variables investigated included the experience of the test subjects in making annoyance judgments and their home exposure to airplane noise. The annoyance judgments increased with both noise level and number of flyovers. The increased annoyance produced by doubling the number of flyovers was found to be the equivalent of a 4 to 6 db increase in noise level. The sensitivity of the subjects to changes in both noise level and number of flyovers increased with laboratory experience. Although the means of the annoyance judgments made in the laboratory were found to decrease with the subjects' home exposure to aircraft noise, the subjects' sensitivities to changes in both level and number were unaffected by their home exposure.

Powell, C. A.↗

Report for simultaneous, multiple independently steered beam study for Airborne Electronically Steerable Phased Array (AESPA) program

Design concepts of an array for the formation of multiple, simultaneous, independently pointed beams for satellite communication links were investigated through tradeoffs of various approaches which were conceived as possible solutions to the problem. After the preferred approach was selected, a more detailed design was configured and is presented as a candidate system that should be given further consideration for development leading to a preliminary design. This array uses an attenuator and a phase shifter with every element. The aperture excitation necessary to form the four beams is calculated and then placed across the array using these devices. Pattern analysis was performed for two beam and four beam cases with numerous patterns being presented. Parameter evaluation shown includes pointing accuracy and beam shape, sidelobe characteristics, gain control, and beam normalization. It was demonstrated that a 4 bit phase shifter and a 6 bit, 30 dB attenuator were sufficient to achieve adequate pattern performances. The phase amplitude steered multibeam array offers the flexibility of 1 to 4 beams with an increase in gain of 6 dB if only one beam is selected.

Source record↗

Multiple band circularly polarized microstrip antenna

A multiple antenna assembly for communicating electromagnetic radiation is disclosed. An antenna element stack is constructed of a plurality of elliptical lamina antenna elements mutally separated by layers of dielectric material, and separated from a ground plane by dielectric material. The antenna assembly is coupled through a feed line in contact with the top antenna element. A conductor joins the remaining antenna elements to the ground plane. Each individual antenna element is operable for communication reception and transmission within a frequency band determined by the size of the particular antenna element. The sizes of the antenna elements may be selected to provide electromagnetic radiation communication over several distinct frequency bands, or to connect the individual bands into a broad band.

Yu, I. P.↗

On the multiplicity of solutions of the inverse problem for a vibrating beam

The paper considers a specific inverse problem for a vibrating beam with three nonsympathetic spectra. More specifically, the spectral data consist of the natural frequencies of vibration of the beam in the following three configurations: (1) clamped-clamped, (2) clamped-supported, and (3) clamped-free. The basic equations for an inhomogeneous discrete beam are derived, where this simple mechanical system provides valuable insight into the inverse problem. All the necessary ingredients for a consideration of the inverse problem are given. Attention is given to an analysis of the particular inverse problem for which the spectral data are associated with the natural frequencies of vibrations in the above configurations. It is shown that with such data, the inverse problem has a 2exp(N-1)-fold multiplicity of solutions.

Barcilon, V.↗

Multiple scattering of solar resonance radiation in the nearby interstellar medium. I

The paper presents approximate solutions obtained for a radiative transfer problem that represents a highly-idealized description of the multiple scattering of solar resonance radiation in the nearby interstellar medium. The problem of a point source in the center of a spherically symmetric cavity imbedded in an infinite uniform medium is solved for a range of cavity radii. First and second-order scattering contributions are calculated, and the Eddington approximation is used to estimate the higher order components of the radiation field. It is shown that for coherent scattering at very large cavity radii, the backscattered intensity from the cavity approaches three times the value deduced from the optically thin solution, in agreement with previous work. It is concluded that an accurate analysis of sky background will require including not only the frequency redistribution, but also the correct spatial distribution of density.

Keller, H. U.↗

Packet communications in satellites with multiple-beam antennas and signal processing

A communication satellite with a multiple-beam antenna and onboard signal processing is considered for use in a 'message-switched' data relay system. The signal processor may incorporate demodulation, routing, storage, and remodulation of the data. A system user model is established and key functional elements for the signal processing are identified. With the throughput and delay requirements as the controlled variables, the hardware complexity, operational discipline, occupied bandwidth, and overall user end-to-end cost are estimated for (1) random-access packet switching; and (2) reservation-access packet switching. Other aspects of this network (eg, the adaptability to channel switched traffic requirements) are examined. For the given requirements and constraints, the reservation system appears to be the most attractive protocol.

Davies, R.↗

An experimental 20/30 GHz communications satellite conceptual design employing multiple-beam paraboloid reflector antennas

An experimental 20/30 GHz communications satellite conceptual design is described which employs multiple-beam paraboloid reflector antennas coupled to a TDMA transponder. It is shown that the satellite employs solid state GaAs FET power amplifiers and low noise amplifiers while signal processing and switching takes place on-board the spacecraft. The proposed areas to be served by this satellite would be the continental U.S. plus Alaska, Hawaii, Puerto Rico, and the Virgin Islands, as well as southern Canada and Mexico City. Finally, attention is given to the earth stations which are designed to be low cost.

Goldman, A. M., Jr.↗

Investigation of numerical properties of Hovenier's exit function equation for multiple scattering of light

A technique of deriving Hovenier's exit function equation (1978) for multiple scattering, starting with a set of invariant imbedding equations, is presented. The feasibility of the exit function equation as a means to obtain reflection and transmission functions is investigated for isotropic, Rayleigh, and Henyey-Greenstein phase functions with emphasis on the numerical stability, accuracy and timing. It is possible to compute the reflection function rather accurately with an efficiency comparable to that of the standard doubling technique for the same phase functions with moderate anisotropy. The resulting transmission is slightly less accurate than the reflection function, but it may be acceptable for practical purposes.

Kawabata, K.↗

Form-drag instability, multiple equilibria and propagating planetary waves in baroclinic, orographically forced, planetary wave systems

A two-layer baroclinic model is used to study the planetary-scale motions of a thermally driven atmosphere in the presence of topography, and in doing so to extend previous results obtained with a barotropic model. Highly truncated spectral equations are used to obtain multiple wavelike stationary equilibrium states, to examine the instabilities that produce them, and to study the instabilities that feed on them and give rise to traveling planetary waves. Although the equilibria cannot exist without orography, their energy comes from the potential energy of the mean flow, not from kinetic energy transfer via the mountain torque. Low-index (blocking) equilibria as well as high-index equilibria require a large thermal driving and are associated with both orographic and baroclinic instability of the Hadley circulation. It is suggested that blocking in nature is a quasi-stable circulation arising from orographic instability with strong thermal driving; and that observed low-frequency, propagating planetary waves are due to instabilities of the quasi-stationary, topographically forced equilibria.

Charney, J. G.↗

A new method for optimizing multiple flyby trajectories

A new procedure has been developed which minimizes total impulsive Delta V for multiple flyby trajectories with constraints on flyby parameters and maneuver times. The method involves solving a bounds-constrained parameter optimization problem with a Newton algorithm utilizing analytic first and second derivatives. Each trajectory segment connecting consecutive maneuver points is found by first targeting from the preceding maneuver point to the parameters of the upcoming flyby and then propagating the resulting trajectory to the next maneuver point. Multi-conic techniques are used for trajectory propagation and for computation of the state transition matrix. This procedure has successfully optimized Galileo satellite tours containing up to 11 flybys.

Damario, L. A.↗

Ku-band multiple beam antenna

The frequency reuse capability is demonstrated for a Ku-band multiple beam antenna which provides contiguous low sidelobe spot beams for point-to-point communications between any two points within the continental United States (CONUS), or regional coverage beams for direct broadcast systems. A spot beam antenna in the 14/21 GHz band which provides contiguous overlapping beams covering CONUS and two discrete beams covering Hawaii and Alaska were designed, developed, and tested. Two reflector antennas are required for providing contiguous coverage of CONUS. Each is comprised of one offset parabolic reflector, one flat polarization diplexer, and two separate planar array feeds. This antenna system provides contiguous spot beam coverage of CONUS, utilizing 15 beams. Also designed, developed and demonstrated was a shaped contoured beam antenna system which provides contiguous four time zone coverage of CONUS from a single offset parabolic reflector incorporating one flat polarization diplexer and two separate planar array feeds. The beams which illuminate the eastern time zone and the mountain time zone are horizontally polarized, while the beams which illuminate the central time zone and the pacific time zone are vertically polarized. Frequency reuse is achieved by amplitude and polarization isolation.

Chen, C. C.↗

Experiments on multiple vortices in a side dump gas generator ramjet

The role of multiple vortices in the flame stabilization process of a 4 inlet side dump ramjet was determined. Very rich propane air mixtures were injected at the head to simulate a gas generator ramjet. Swirl was introduced by canting the inlets at the dump station. The inlet angle, swirl angle, and the distance of the head from the dump station were varied over a wide range to determine the importance of the vortices located at the dump stations and at the head. It is shown that with proper design, the vortex at the head can be made to perform as a pilot burner allowing a great deal of versatility of operation and it appears to provide all the criteria of pollution free operation.

Choudhury, P. R.↗

Multiple-scale turbulence modeling of boundary layer flows for scramjet applications

As part of an investigation into the application of turbulence models to the computation of flows in advanced scramjet combustors, the multiple-scale turbulence model was applied to a variety of flowfield predictions. The model appears to have a potential for improved predictions in a variety of areas relevant to combustor problems. This potential exists because of the partition of the turbulence energy spectrum that is the major feature of the model and which allows the turbulence energy dissipation rate to be out of phase with turbulent energy production. The computations were made using a consistent method of generating experimentally unavailable initial conditions. An appreciable overall improvement in the generality of the predictions is observed, as compared to those of the basic two-equation turbulence model. A Mach number-related correction is found to be necessary to satisfactorily predict the spreading rate of the supersonic jet and mixing layer.

Fabris, G.↗

Stochastic analysis of multiple-passband spectral classifications systems affected by observation errors

The classification of targets viewed by a pushbroom type multiple band spectral scanner by algorithms suitable for implementation in high speed online digital circuits is considered. A class of algorithms suitable for use with a pipelined classifier is investigated through simulations based on observed data from agricultural targets. It is shown that time distribution of target types is an important determining factor in classification efficiency.

Tsokos, C. P.↗

Multiple crossings of a very thin plasma sheet in the Earth's magnetotail

High resolution magnetic field, plasma and energetic particle data from the IMP-8 spacecraft were studied for multiple crossings of the Earth's magnetotail plasma sheet when it becomes thin during magnetospheric substorms. Traversals recur on a time scale of several minutes and they are associated with high velocity plasma flows that are usually directed tailward but are occasionally directed earthward for brief intervals. Observations are explained by rapid oscillations of a plasma sheet that is only a few thousand km thick, a dimension comparable to the gyroradius of energetic protons. Differences in the angular distributions of the two energies indicate that the higher energy protons are preferentially located on field lines deeper in the tail lobe. A neutral line acceleration model is supported tailward streaming energetic electrons which are occasionally present at the lobe plasma sheet interface.

Fairfield, D. H.↗

Repeatable, multiple-peaked structure in Type I X-ray bursts

A distinct, identifiable, multiple-peaked structure has been observed in Type I X-ray bursts from three sources. At energies below 6 keV, the light curves look like typical Type I bursts. At higher energies, the burst is double-peaked, with both the depth of the dip and the separation between the peaks increasing with energy. A light curve of the energy-integrated intensity shows no distinct double peak, suggesting that only a single energy release occurs. Blackbody fits to the evolving burst spectra yield changing radii and temperatures, inversely correlated, during the early part of the burst. The physical interpretation of these changes is uncertain. Burst decay spectra yield relatively constant radii with decreasing temperatures. It is proposed that Compton scattering may be responsible for the dips in the higher-energy light curves by shifting photons to lower energies.

Hoffman, J. A.↗

Large volume multiple path nuclear lasing of /He-3/-Ar

Output power of 550 W has been achieved from a nuclear-pumped multiple path laser system containing (He-3)-Ar by using the (He-3)(n, p)3(H) nuclear reaction for power deposition. Lasing was achieved in Ar at 1790 nm. The complex beam profile was resolved by an InAs array detector. Laser output was directly proportional to thermal neutron flux, and also increased proportionally with increasing (He-3) pressure up to 292.6 kPa. The variation of the laser output power with the number of passes through the excited medium was found to peak at 5-7 passes.

De Young, R. J.↗

Satellite multiple access systems for mobile communication

This paper considers multiple access techniques for a mobile radio system which incorporates a geosynchronous orbiting satellite repeater through which mobile terminals communicate. The communication capacities of FDMA, TDMA and CDMA systems are examined for a 4 MHz bandwidth system to serve up to 10,000 users. An FDMA system with multibeam coverage is analyzed in detail. The system includes an order-wire network for demand-access control and reassignment of satellite channels. Satellite and terminal configurations are developed to a block diagram level and system costs and implementation requirements are discussed.

Lewis, J. L.↗