Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Modeling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,621 records · Page 90

Investigations of vertical wind variations at a mountain top in the Himalaya using Doppler Lidar observations and model simulations

Hight-resolved observations of vertical winds remain nearly non-existing over the Himalayas, despite of an­ticipated crucial role of vertical motions in transporting pollution across the Himalayan hms. The present study analyze the vertical wind observations from surface to 1 km above ground level over Manora Peak (29.4° N; 79.5° E; 1958 m ams!) in the Himalaya performed using a Doppler Lidar during the Ganges Valley Aerosol Experiment (GVAX). Vertical wind exhibited a pronounced diurnal variability at Manora Peak comprising of upward motions during the daytime (05-10 UT) and downward motions during nighttime typical of a mountain­valley system. Mean vertical wind speeds are observed to be varying from -0.8 to +0.8 ms- 1 during the study period with a variance of 0.1-1.5 m2s·2, which is attributed to the thermally driven turbulence. Mean vertical winds are observed to be stronger in the Doppler Lidar profiles above Manora Peak (-0_8 to 0.8 ms- 1) as compared to near surface measurements at this station using an ultrasonic anemometer ( -0.4 to 0.4 ms - 1 ), and low altitude stations in India. Daytime vertical wind speeds are observed to be higher during pre-monsoon (0.81 ms- 1), as compared to post-monsoon (0.24 ms- 1) and winter (0.33 ms- 1)_ Average Black Carbon (BC) concentrations are significantly higher during strong upward vertical winds, which indicates efficient transport of polluted air mass from low-altitude regions to the Himalaya. Weather Research and Forecasting (WRF) model reproduces the observed diurnal pattern in the vertical wind at the observation site however the model un­derestimates the variability.

Shukla, K K.↗

Modeling and simulation challenges pursued by the Consortium for Advanced Simulation of Light Water Reactors (CASL)

The Consortium for the Advanced Simulation of Light Water Reactors (CASL), the first Energy Innovation Hub of the Department of Energy, was established in 2010 with the goal of providing modeling and simulation (M&S) capabilities that support and accelerate the improvement of nuclear energy's economic competitiveness and the reduction of spent nuclear fuel volume per unit energy, and all while assuring nuclear safety. To accomplish this requires advances in M&S capabilities in radiation transport, thermal-hydraulics, fuel performance and corrosion chemistry. To focus CASL's R&D, industry challenge problems have been defined, which equate with long standing issues of the nuclear power industry that M&S can assist in addressing. To date CASL has developed a multi-physics “core simulator” based upon pin-resolved radiation transport and subchannel (within fuel assembly) thermal-hydraulics, capitalizing on the capabilities of high performance computing. CASL's fuel performance M&S capability can also be optionally integrated into the core simulator, yielding a coupled multi-physics capability with untapped predictive potential. Material models have been developed to enhance predictive capabilities of fuel clad creep and growth, along with deeper understanding of zirconium alloy clad oxidation and hydrogen pickup. Understanding of corrosion chemistry (e.g., CRUD formation) has evolved at all scales: micro, meso and macro. CFD R&D has focused on improvement in closure models for subcooled boiling and bubbly flow, and the formulation of robust numerical solution algorithms. For multiphysics integration, several iterative acceleration methods have been assessed, illuminating areas where further research is needed. Finally, uncertainty quantification and data assimilation techniques, based upon sampling approaches, have been made more feasible for practicing nuclear engineers via R&D on dimensional reduction and biased sampling. Industry adoption of CASL's evolving M&S capabilities, which is in progress, will assist in addressing long-standing and future operational and safety challenges of the nuclear industry. - Highlights: • Complexity of physics based modeling of light water reactor cores being addressed. • Capability developed to help address problems that have challenged the nuclear power industry. • Simulation capabilities that take advantage of high performance computing developed.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Modeling electrokinetic flows by consistent implicit incompressible smoothed particle hydrodynamics

We present an efficient implicit incompressible smoothed particle hydrodynamics (I2SPH) discretization of Navier-Stokes, Poisson-Boltzmann, and advection-diffusion equations subject to Dirichlet or Robin boundary conditions. It is applied to model various two and three dimensional electrokinetic flows in simple or complex geometries. The I2SPH's accuracy and convergence are examined via comparison with analytical solutions, grid-based numerical solutions, or empirical models. The new method provides a framework to explore broader applications of SPH in microfluidics and complex fluids with charged objects, such as colloids and biomolecules, in arbitrary complex geometries.

Pan, Wenxiao↗

Modeling of the EMRAS urban working group hypothetical scenario using the RESRAD-RDD methodology.

The RESRAD-RDD methodology was applied to model the short- and long-term radiation exposures after a hypothetical radiological dispersal device (RDD) event in an urban environment. It was assumed that an RDD event would result in outside surface contamination of the exterior walls and roofs of surrounding buildings, as well as associated paved areas and lawns. The contaminants also might move inside the buildings and deposit on floors and interior walls. Some important input parameters include occupancy factors, building characteristics, and weathering of surface contamination. The modeling results include predicted external dose rates, relative contributions from important surfaces, annual and cumulative doses, and radionuclide concentrations. Potential countermeasures evaluated include grass removal, soil removal, and washing of paved areas.

54 ENVIRONMENTAL SCIENCES↗

A Modeling Framework for Evaluating the Drought Resilience of a Surface Water Supply System under Non-stationarity

The future resilience of water supply systems is unprecedentedly challenged by non-stationary processes, such as fast population growth and a changing climate. A thorough understanding of how these non-stationarities impact water supply resilience is vital to support sustainable decision making, particularly for large cities in arid and/or semi-arid regions. In this study, a novel modeling framework, which integrates hydrological processes and water management, was established over a representative water limited metropolitan area to evaluate the impacts of water availability and water demand on reservoir storage and water supply reliability. In this framework, climate change induced drought events were selected from statistically downscaled Coupled Model Intercomparison Project Phase 5 outputs under the Representative Concentration Pathway 8.5 scenario, while future water demand was estimated by the product of projected future population and per capita water use. Compared with the first half of the 21st century (2000–2049), reservoir storage and water supply reliability during the second half century (2050–2099) are projected to reduce by 16.1% and 14.2%, respectively. While both future multi-year droughts and population growth will lower water supply resilience, the uncertainty associated with future climate projection is larger than that associated with urbanization. To reduce the drought risks, a combination of mitigation strategies (e.g., additional conservation, integrating new water sources, and water use redistribution) was found to be the most efficient approach and can significantly improve water supply reliability by as much as 15.9%.

Zhao, Gang (ORCID:0000000327370530)↗

Relationship between lath boundary structure and radiation induced segregation in a neutron irradiated 9 wt.% Cr model ferritic/martensitic steel

Ferritic/Martensitic (F/M) steels with high Cr content posses the high temperature strength and low swelling rates required for advanced nuclear reactor designs. Radiation induced segregation (RIS) occurs in F/M steels due to solute atoms preferentially coupling to point defect fluxes which migrate to defect sinks, such as grain boundaries (GBs). The RIS response of F/M steels and austenitic steels has been shown to be dependent on the local structure of GBs where low energy structures have suppressed RIS responses. This relationship between local GB structure and RIS has been demonstrated primarily in ion-irradiated specimens. A 9 wt.% Cr model alloy steel was irradiated to 3 dpa using neutrons at the Advanced Test Reactor (ATR) to determine the effect of a neutron radiation environment on the RIS response at different GB structures. This investigation found the relationship between GB structure and RIS is also active for F/M steels irradiated using neutrons. The data generated from the neutron irradiation is also compared to RIS data generated using proton irradiations on the same heat of model alloy.

36 MATERIALS SCIENCE↗

Modeling of detachment experiments at DIII-D

Edge fluid–plasma/kinetic–neutral modeling of well-diagnosed DIII-D experiments is performed in order to document in detail how well certain aspects of experimental measurements are reproduced within the model as the transition to detachment is approached. Results indicate, that at high densities near detachment onset, the poloidal temperature profile produced in the simulations agrees well with that measured in experiment. However, matching the heat flux in the model requires a significant increase in the radiated power compared to what is predicted using standard chemical sputtering rates. Lastly, these results suggest that the model is adequate to predict the divertor temperature, provided that the discrepancy in radiated power level can be resolved.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Exploring an Ensemble-Based Approach to Atmospheric Climate Modeling and Testing at Scale

A strict throughput requirement has placed a cap on the degree to which we can depend on the execution of single, long, fine spatial grid simulations to explore global atmospheric climate behavior. Alternatively, running an ensemble of short simulations is computationally more efficient. We test the null hypothesis that the climate statistics of a full-complexity atmospheric model derived from an ensemble of independent short simulation is equivalent to that from an equilibrated long simulation. The climate of short simulation ensembles is statistically distinguishable from that of a long simulation in terms of the distribution of global annual means, largely due to the presence of low-frequency atmospheric intrinsic variability in the long simulation. We also find that model climate statistics of the simulation ensemble are sensitive to the choice of compiler optimizations. While some answer-changing optimization choices do not effect the climate state in terms of mean, variability and extremes, aggressive optimizations can result in significantly different climate states.

54 ENVIRONMENTAL SCIENCES↗

Computational modeling of electrostatic charge and fields produced by hypervelocity impact

Following prior experimental evidence of electrostatic charge separation, electric and magnetic fields produced by hypervelocity impact, we have developed a model of electrostatic charge separation based on plasma sheath theory and implemented it into the CTH shock physics code. Preliminary assessment of the model shows good qualitative and quantitative agreement between the model and prior experiments at least in the hypervelocity regime for the porous carbonate material tested. The model agrees with the scaling analysis of experimental data performed in the prior work, suggesting that electric charge separation and the resulting electric and magnetic fields can be a substantial effect at larger scales, higher impact velocities, or both.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗