Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “MINERALOGY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,621 records · Page 90

The large decline in carbonate $\delta^{238}$U from a PETM section at Tingri (South Tibet) was driven by local sea-level changes, not global oceanic anoxia

Uranium isotope compositions (δ 238 ) and Th/U in carbonates are being explored as paleoredox proxies to study global oceanic anoxia. However, the impact of changes to local depositional environments that might cause a decline in δ 238 U and an increase in Th/U has not been thoroughly investigated. Here we report a decline in δ 238 U (from +0.1 to -0.3‰) and an increase in Th/U from shallow-marine carbonates during the Paleocene-Eocene thermal maximum at Tingri (south Tibet). Changes of δ 238 U and Th/U are not fully coupled. The decline in δ 238 U coincided with a local sea-level fall, whereas the increase in Th/U occurred mainly during a sea-level rise. The decline in δ 238 U likely results from changes in redox conditions of pore waters and in primary carbonate mineralogy. The increase in Th/U is ascribed to reduced authigenic U(IV) accumulation. Here our results suggest that changes in local depositional environments can cause behavior of δ 238 U and Th/U resembling that induced by expanded global oceanic anoxia. This finding calls for caution to consider local factors before applying δ 238 U and Th/U as global paleoredox proxies.

58 GEOSCIENCES↗

Characterization and recovery of rare earth elements and other critical metals (Co, Cr, Li, Mn, Sr, and V) from the calcination products of a coal refuse sample

Here, the impacts of calcination on the leaching recovery of rare earth elements (REEs) and other critical metals from a Baker seam coal refuse material were investigated. Acid leaching test results showed that leaching recovery of the REEs, especially the light REEs, was increased significantly from around 24% to 80–90% after calcination under 600–750 °C for two hours. By considering the major element leaching kinetics and the mineralogical changes of the dominant minerals caused by calcination, two mechanisms were proposed for the improved leaching performance: (1) decomposition of difficult-to-dissolve REE-bearing minerals into soluble forms; and (2) liberation of REE-bearing minerals encapsulated in clays after calcination due to the dehydration and disintegration of the layered clay structure. Sequential chemical extraction tests showed that a significant fraction (around 75%) of the REEs in the raw material were present in an insoluble form. After calcination under proper temperatures (600–800 °C), the majority of the insoluble light REEs (LREEs) were converted into soluble forms. Changes in the modes of occurrence of the LREEs and phosphorous based on leaching rate and sequential leaching correlated well as a function of the calcination temperature. This finding in addition to SEM-EDX results tends to indicate the potential that the LREEs occur primarily as rare earth phosphates such as monazite in the untreated coal refuse material. The acid leaching and sequential chemical extraction results show that co-extraction of REEs and other critical metals such as Co, Mn, and Li is possible using a calcination-acid leaching procedure.

01 COAL, LIGNITE, AND PEAT↗

Assessment of CO 2 trapping mechanisms in partially depleted oil-bearing sands

The goal of this work is to evaluate various CO 2 sequestration mechanisms occurring in the Morrow B Sandstone in the Farnsworth Unit. A history-matched numerical simulation model was created using extensive geological, petrophysical, and operational data collected from the field. The numerical model is competent to investigate the impact of residual, structural-stratigraphic, solubility, and mineral trapping mechanisms on the fluid transportation dynamics and petrophysical property variations. The model forecasts the field response of 20 years of WAG injections. Afterward, all wells were shut-in, and the reservoir was allowed to evolve for 1000 years to investigate the fate of injected CO 2 . In this paper, we assess the impacts of various trapping mechanisms on oil recovery and CO 2 storage efficacy. By analyzing the results reported from the numerical simulation model, the in-situ fluid composition and mineralogy changes are also investigated. More importantly, we seek to confirm the petrophysical property variations due to the CO 2 injection with observations from laboratory measurements. The experiences gained from this study provide valuable insights regarding physiochemical storage induced by the CO 2 injection activities and serve as a benchmark case for future CO 2 enhanced oil recovery (EOR) projects involving reactive solute transport.

42 ENGINEERING↗

Geochemical reactions and alteration of pore architecture in saturated shale after injection of stimulation fluid

Pore architecture regulates fluid flow between unconventional shale reservoir and hydraulically-induced fractures. Imbibition of stimulation fluid may change this architecture and alter hydrocarbon flow. Hydrothermal experiments were conducted at reservoir conditions (125 °C, 45 MPa) to test two hypotheses: 1) Shale, not stimulation fluid, dominates the geochemistry of an unconventional reservoir containing formation water; and 2) Mineral dissolution and precipitation induced by stimulation fluid is transient and manifests across micro-, meso-, and macro-scales of pore architecture. Experiments replicated a shut-in well in the Cretaceous Baxter Shale, Green River Basin, Wyoming USA. Stimulation fluid was injected into one experiment after formation water (I = 0.35 mol/kg, pH = 6.4) and core reacted for 48 days. This novel approach equilibrated rock and formation water and saturated pores with formation water before introducing stimulation fluid. The second experiment served as a control. Trends of aqueous calcium, silica and aluminum in the injection experiment suggest transient dissolution of calcite and feldspar and/or quartz as well as clay and barite precipitation; mineralogic evidence was limited to calcite dissolution and barite precipitation. The rock maintained reducing conditions (Eh = +0.08 to -0.16 V) despite injection of oxidizing stimulation fluid (Eh = 1.1 V). pH of the stimulation fluid-formation water mixture evolved from 2.3 to pre-injection values (~6) within 24 h. The results indicate that mineral dissolution and precipitation manifest in macropores with barely detectable alteration to micro- and mesopores. Formation water or organic matter in pores may have inhibited access of stimulation fluid to micro- and mesopores

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Effect of oxidative breakers on organic matter degradation, contaminant mobility and critical mineral release during shale-fracturing fluid interactions in the Marcellus Shale

Oil and gas production from organic-rich shale formations has become viable through advancements in multistage hydraulic fracturing. However, fluctuations in oil and gas prices, coupled with the sharp decline in gas production after the initial days of fracturing operations, drive operators to devise strategies for enhancing hydrocarbon production. The use of highly reactive fracturing fluids that include strong oxidizing agents, also known as breakers, can potentially increase well productivity. The oxidative breakers are used to reduce the viscosity of gel-based fluids after the proppant is transported into fracture zones of the target formation. These breakers can also degrade the organic matter, enhancing the release of hydrocarbons. However, chemical byproducts generated by the interaction of oxidative breakers with the shale matrix have not been extensively studied. Here, this study investigated the fluid-rock interactions between Marcellus Shale and synthetic hydraulic fracturing fluid (HFF) solutions comprising three different oxidative breakers, i.e., ammonium persulfate, sodium bromate, and sodium hypochlorite, commonly used in the Appalachian Basin, USA. Our results demonstrate that the type of oxidizing breakers used in the HFF controlled the type and amount of volatile organic compounds (VOCs) and semi-volatile organic compounds (SVOCs) produced. In all HFF reacted effluents, we observed the transformation of VOCs and the presence of organic acids in variable amounts. However, effluents from HFF containing sodium bromate and sodium hypochlorite breakers showed the presence of several halogenated organic compounds. Changes in major ions and mineralogy indicate that carbonate dissolution and barite precipitation were ubiquitous in all shale reacted effluents. Our results also demonstrate that the addition of oxidative breakers increased the concentration of several major and trace elements in the effluents. These elements fall under the critical mineral (CM) or critical element category due to their high demand in emerging technologies and susceptibility to supply chain disruption due to variety of factors. However, before oxidative breakers can be used at a larger field scale to enhance the release and recovery of CM and hydrocarbons, a better understanding is required of the potential environmental impacts associated with the generation and transformation of contaminants during breaker-fluid-rock interaction.

54 ENVIRONMENTAL SCIENCES↗

Unravelling the origins of shale nanoporosity using small-angle neutron scattering (SANS)

Hydrocarbon production from tight rocks is constrained by slow diffusion within the shale matrix, limited by small pore sizes and low permeability. The nanopore proportion and size distribution significantly influence matrix permeability, a key property for optimizing hydrocarbon recovery and supporting hydrogen production while minimizing environmental impacts. Small-angle neutron scattering (SANS) has been an important tool for exploring the characteristics and structure of shale nanopores. This study used SANS to analyze nanoporosity and pore size distribution (<100 nm) in tight rocks with varying compositions to determine the influence of rock heterogeneity on SANS measurements. Results showed that nanoporosity correlates with clay content, with the highest clay-rich shale (52.48 wt% clay) exhibiting 8.8 % nanoporosity. SANS also revealed more nanopores than traditional nitrogen adsorption measurements, affirming its ability to reflect bulk mineralogy and upholding the relevance of experimental findings using this technique to optimize field operational approaches.

03 NATURAL GAS↗

An investigation of reaction parameters on geochemical storage of non-pure CO2 streams in iron oxides-bearing formations

Hematite deposit that is the main FeIII-bearing mineral in sedimentary red beds was proposed as a potential host repository for converting CO2 into carbonate minerals such as siderite (FeCO3), when CO2–SO2 gas mixtures are co-injected. This work investigated CO2 mineral trapping using hematite and sensitivity of the reactive systems to different parameters, including particle size, gas composition, temperature, pressure, and solid-to-liquid ratio. Experimental and modelling studies of hydrothermal experiments were conducted, which emulated a CO2 sequestration scenario by injecting CO2-SO2 gas streams into a NaCl-NaOH brine hosted in iron oxide-containing aquifer. This study provides novel information on the mineralogical changes and fluid chemistry derived from the co-injection of CO2-SO2 gas mixtures in hematite deposit. It can be concluded that the amount of siderite precipitate depends primarily on the SO2 content of the gas stream. Increasing SO2 content in the system could promote the reduction of Fe3+ from the hematite sample to Fe2+, which will be further available for its precipitation as siderite. Moreover, siderite precipitation is enhanced at low temperatures and high pressures. The influence of the solid to liquid ratio on the overall carbonation reaction suggests that the conversion increases if the system becomes more diluted.

CO2 storage↗

Heterogeneous Reduction of Tc(VII) by Fe(II) at the Solid-Water Interface

Technetium-99 is a byproduct of uranium fission. It exists in two stable valence states (IV/VII) and exhibits a half-cell potential of intermediate value (Eo = 0.748 V). The oxidized form of 99Tc [pertechnetate, TcO4-] is an oxyanion that sorbs poorly to amphoteric surfaces and forms few solid phases with geochemically relevant cations. It is consequently highly mobile in oxic water-rock systems. The reduced valence state [Tc(IV)] is relatively insoluble (<10-8 mol L-1), and, hence immobile as an oxyhydroxide precipitate [TcO2•nH2O(s)]. In spite of favorable thermodynamics, Tc(VII) reacts slowly with Fe2+(aq) under anoxic conditions. Experiments were performed herein to investigate the rates and products of heterogeneous reduction of Tc(VII) by Fe(II) sorbed to hematite and goethite, and by structural Fe(II) in a dithionite-citrate-bicarbonate (DCB) reduced natural phyllosilicate mixture containing vermiculite, illite, and muscovite. The heterogeneous reduction of Tc(VII) by Fe(II) sorbed to the Fe(III) oxides increased with increasing pH and was coincident with a second event of Fe2+(aq) adsorption. The reaction was almost instantaneous above pH 7. In contrast, the reduction rates of Tc(VII) by structural Fe(II) in the DCB-reduced phyllollsilicates, were not sensitive to pH or the concentration of ion-exchangeable Fe(II), and were orders of magnitude slower than observed for the Fe(III) oxides. Tc-EXAFS spectroscopy revealed that the reduction products were virtually identical on hematite and goethite that were comprised primarily of sorbed octahedral TcO2 monomers and dimers with significant Fe(III) in the second coordination shell. The nature of heterogeneous Fe(III) resulting from the redox reaction was ambiguous as probed by Tc-EXAFS spectroscopy, although Mössbauer spectroscopy applied to an experiment with 56Fe-goethite with adsorbed 57Fe(II) implied that redox product Fe(III) was goethite-like. The Tc(IV) reduction product formed on the DCB-reduced phyllosilicates was different from the Fe(III) oxides, and was more similar to Tc(IV) oxyhydroxide in its second coordination shell. The heterogeneous reduction of Tc(VII) to less soluble forms by sorbed and structural Fe(II) in anoxic environments may be a very important geochemical process that will proceed at very different rates and that will yield different surface species depending subsurface pH and mineralogy.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗

Fractionation of Oxygen Isotopes in Phosphate during its Interactions with Iron Oxides

Iron (III) oxides are ubiquitous in near-surface soils and sediments and interact strongly with dissolved phosphates via sorption, co-precipitation, mineral transformation and redox-cycling reactions. Iron oxide phases are thus, an important reservoir for dissolved phosphate, and phosphate bound to iron oxides should reflect dissolved sources as well as carry a history of the biogeochemical cycling of phosphorus (P). It has recently been demonstrated that dissolved inorganic phosphate (DIP) in rivers, lakes, estuaries and the open ocean can be used to distinguish different P sources and biological reaction pathways in the ratio of 18 O/ 16 O (δ 18 OP) in PO43-. Here we present results of experimental studies aimed at determining whether non-biological interactions between dissolved inorganic phosphate and solid iron-oxides involve fractionation of oxygen isotopes in PO4. Determination of such fractionations is critical to any interpretation of δ 18 OP values of modern (e.g. hydrothermal iron oxide deposits, marine sediments, soils, groundwater systems) to ancient and extraterrestrial samples (e.g., BIF’s, Martian soils). Batch sorption experiments were performed using varied concentrations of synthetic ferrihydrite and isotopically- labeled dissolved ortho-phosphate at temperatures ranging from 4 to 95 oC. Mineral transformations and morphological changes were determined by X-Ray, Mössbauer spectroscopy and SEM image analyses. Our results reveal that isotopic fractionation between sorbed and aqueous phosphate occurs during the early phase of sorption with isotopically light phosphate preferentially incorporated into sorbed/solid phases. This fractionation showed negligible temperature-dependence and gradually decreased as a result of O-isotopic exchange between sorbed and aqueous phase phosphate, to become insignificant at greater than ~100 hours of reaction. In high-temperature experiments, this exchange was very rapid resulting in negligible fractionation between sorbed and aqueous-phase phosphate at much shorter reaction times. Mineral transformation resulted in initial preferential desorption/loss of light phosphate (P16O4) to solution. However, the continual exchange between sorbed and aqueous PO4, concomitant with this mineralogical transformation resulted again in negligible fractionation between aqueous and sorbed PO4 at long reaction times (> 2000 hrs). This finding is consistent with results obtained from natural ocean samples. This finding is important to the interpretation of PO4 O-isotope values in natural systems where iron-oxides are present and to studies of the biogeochemical cycling of P and PO4 biomarkers.

54 ENVIRONMENTAL SCIENCES↗

Determining Individual Mineral Contributions To U(VI) Adsorption In A Contaminated Aquifer Sediment: A Fluorescence Spectroscopy Study

The adsorption and speciation of U(VI) was investigated on contaminated, fine grained sediment materials from the Hanford 300 area (SPP1 GWF) in simulated groundwater using cryogenic laser-induced U(VI) fluorescence spectroscopy combined with chemometric analysis. A series of reference minerals (montmorillonite, illite, Michigan chlorite, North Carolina chlorite, California clinochlore, quartz and synthetic 6-line ferrihydrite) was used for comparison that represents the mineralogical constituents of SPP1 GWF. Surface area-normalized Kd values were measured at U(VI) concentrations of 5x10-7 mol L-1 and 5x10-6 mol L-1, respectively, that displayed the following affinity series: 6-line-ferrihydrite > North Carolina chlorite ≈ California clinochlore > Michigan chlorite ≈ quartz > montmorillonite ≈ illite ≈ SPP1 GWF. Both time-resolved spectra and asynchronous two-dimensional (2D) correlation analysis of SPP1 GWF at different delay times indicated that two major adsorbed U(VI) species were present in the sediment that resembled U(VI) adsorbed on quartz and phyllosilicates. Simulations of the normalized fluorescence spectra confirmed that the speciation of SPP1 GWF was best represented by a linear combination of U(VI) adsorbed on quartz (90%) and phyllosilicates (10%). However, the fluorescence quantum yield for U(VI) adsorbed on phyllosilicates was lower than quartz and, consequently, its fractional contribution to speciation may be underestimated. Spectral comparison with literature data suggested that U(VI) exists primarily as inner-sphere U(VI) complexes with surface silanol groups on quartz while U(VI) on phyllosilicates was consistent with the formation of surface U(VI) tricarbonate complexes.

54 ENVIRONMENTAL SCIENCES↗

Biological Oxidation of Fe(II) in Reduced Nontronite Coupled with Nitrate Reduction by Pseudogulbenkiania sp. Strain 2002

Nitrate contamination in soils, sediments, and water bodies is a significant issue. Although much is known about nitrate degradation in these environments, especially via microbial pathways, a complete understanding of all degradation processes, especially in clay mineral-rich soils, is still lacking. The objective of this study was to study the potential of removing nitrate contaminant using structural Fe(II) in clay mineral nontronite. Specifically, the coupled processes of microbial oxidation of Fe(II) in microbially reduced nontronite (NAu-2) and nitrate reduction by Pseudogulbenkiania species strain 2002 was investigated. Bio-oxidation experiments were conducted in bicarbonate-buffered medium under both growth and nongrowth conditions. The extents of Fe(II) oxidation and nitrate reduction were measured by wet chemical methods. X-ray diffraction (XRD), scanning and transmission electron microscopy (SEM and TEM), and 57Fe-Mössbauer spectroscopy were used to observe mineralogical changes associated with Fe(III) reduction and Fe(II) oxidation in nontronite. The bio-oxidation extent under growth and nongrowth conditions reached 93% and 57%, respectively. Over the same time period, nitrate was completely reduced under both conditions to nitrogen gas (N2), via an intermediate product nitrite. Magnetite was a mineral product of nitrate-dependent Fe(II) oxidation, as evidenced by XRD data and TEM diffraction patterns. The results of this study highlight the importance of iron-bearing clay minerals in the global nitrogen cycle with potential applications in nitrate removal in soils.

Environmental Molecular Sciences Laboratory↗

Evaluation of mineral reactive surface area estimates for prediction of reactivity of a multi-mineral sediment

Our limited understanding of mineral reactive surface area contributes to significant uncertainties in quantitative simulations of reactive chemical transport in subsurface processes. Continuum formulations for reactive transport typically use a number of different approximations for reactive surface area, including geometric, specific, and effective surface area. In this work, reactive surface area estimates are developed and evaluated for their ability to predict dissolution rates in a well-stirred flow-through reactor experiment using disaggregated samples from the Nagaoka pilot CO 2 injection site (Japan). The disaggregated samples are reacted with CO 2 acidified synthetic brine under conditions approximating the field conditions and the evolution of solute concentrations in the reactor effluent is tracked over time. The experiments, carried out in fluid-dominated conditions at a pH of 3.2 for 650 h, resulted in substantial dissolution of the sample and release of a disproportionately large fraction of the divalent cations. Traditional reactive surface area estimation methods, including an adjusted geometric surface area and a BET-based surface area, are compared to a newly developed image-based method. Continuum reactive transport modeling is used to determine which of the reactive surface area models provides the best match with the effluent chemistry from the well-stirred reactor. The modeling incorporates laboratory derived mineral dissolution rates reported in the literature and the initial modal mineralogy of the Nagaoka sediment was determined from scanning electron microscopy (SEM) characterization. The closest match with the observed steady-state effluent concentrations was obtained using specific surface area estimates from the image-based approach supplemented by literature-derived BET measurements. To capture the evolving effluent chemistry, particularly over the first 300 h of the experiment, it was also necessary to account for the grain size distribution in the sediment and the presence of a highly reactive volcanic glass phase that shows preferential cation leaching.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Formation of an ultracarbonaceous Antarctic micrometeorite through minimal aqueous alteration in a small porous icy body

A comprehensive study of the organic chemistry and mineralogy of an ultracarbonaceous micrometeorite (UCAMM D05IB80) collected from near the Dome Fuji Station, Antarctica, was carried out to understand the genetic relationship among organic materials, silicates, and water. The micrometeorite is composed of a dense aggregate of ~5 µm-sized hollow ellipsoidal organic material containing submicrometer-sized phases such as glass with embedded metal and sulfides (GEMS) and mineral grains. There is a wide area of organic material (~15 × 15 μm) in its interior. Low-Ca pyroxene is much more abundant than olivine and shows various Mg/(Mg + Fe) ratios ranging from ~1.0 to 0.78, which is common to previous works on UCAMMs. By contrast, GEMS grains in this UCAMM have unusual chemical compositions. They are depleted in both Mg and S, which suggests that these elements were leached out from the GEMS grains during very weak aqueous alteration, without the formation of phyllosilicates. The organic materials have two textures—smooth and globular with an irregular outline—and these are composed of imine, nitrile and/or aromatic nitrogen heterocycles, and amide. The ratio of nitrogen to carbon (N/C) in the smooth region of the organics is ~0.15, which is five times higher than that of insoluble organic macromolecules in types 1 and 2 carbonaceous chondritic meteorites. In addition, the UCAMM organic materials are soluble in epoxy and are thus hydrophilic; this polar nature indicates that they are very primitive. The surface of the material is coated with an inorganic layer, a few nanometers thick, that consists of C, O, Si, S, and Fe. Sulfur is also contained in the interior, implying the presence of organosulfur moieties. There are no isotopic anomalies of D, 13 C, or 15 N in the organic material. Interstellar photochemistry alone would not be sufficient to explain the N/C ratio of the UCAMM organics; therefore, we imply that a very small amount of fluid on a comet must have been necessary for the formation of the UCAMM. The GEMS grains depleted in Mg and S in the UCAMM prove a very weak degree of aqueous alteration; weaker than that of carbonaceous chondrites. Short-duration weak alteration probably caused by planetesimal shock locally melted cometary ice grains and released water that dissolved the organics; the fluid would likely have not mobilized because of the very low thermal conductivity of the porous icy body. This event enabled the formation of the large organic puddle of the UCAMM, as well as organic matter sulfurization, formation of thin membrane-like layers of minerals, and deformation of organic nanoglobules.

58 GEOSCIENCES↗

Vertical changes of the Co and Mn speciation along a lateritic regolith developed on peridotites (New Caledonia)

Because they can host significant amounts of Co, the Mn-oxides are commonly considered as the major Co-bearing mineral species in lateritic environments. However, little is known about the process leading to the formation and/or the weathering of these Co-rich Mn-oxides. This lack of knowledge is mainly due to the fact that Co concentrations are too low in primary silicates for classical speciation analysis. In this study, we investigated both Co and Mn speciation in a 64 m thick lateritic regolith developed upon peridotites in New Caledonia, by combining High Energy Resolution Fluorescence Detection X-ray absorption Near Edge Structure (HERFD-XANES) spectroscopy at the Co K-edge with classical XANES spectroscopy at the Mn K-edge, bulk chemistry (ICP) and mineralogy (XRD). The results obtained provide new insights into the evolution of Co and Mn speciation as a function of the weathering stages. Co and Mn primarily occur as Co(II) and Mn(II,III) in olivine and serpentine in the bedrock. During the first weathering stage, these forms of Co and Mn are progressively oxidized toward Co(III) and Mn(III,IV), which occur mainly as Co(III)-bearing Mn(III/IV)-oxides in the transition between the saprolite and the laterite. In the uppermost lateritic horizons, long-time weathering resulted in a strong leaching of Co and Mn, and the remaining of these elements occurs as Co(II) and Mn(III) substituting for Fe(III) in goethite. Finally, this latter scavenging process emphasizes the importance of Fe-oxides for the long-term stabilization of Co and Mn in such deeply weathered laterites.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

The Northwest Africa 8159 martian meteorite: Expanding the martian sample suite to the early Amazonian

Northwest Africa (NWA) 8159 is an augite-rich shergottite, with a mineralogy dominated by Ca-, Fe-rich pyroxene, plagioclase, olivine, and magnetite. NWA 8159 crystallized from an evolved melt of basaltic composition under relatively rapid conditions of cooling, likely in a surface lava flow or shallow sill. Redox conditions experienced by the melt shifted from relatively oxidizing (with respect to known Martian lithologies, ~QFM) on the liquidus to higher oxygen fugacity (~QFM + 2) during crystallization of the groundmass, and under subsolidus conditions. This shift resulted in the production of orthopyroxene and magnetite replacing olivine phenocryst rims. NWA 8159 contains both crystalline and shock-amorphized plagioclase (An 50–62 ), often observed within a single grain; based on known calibrations we bracket the peak shock pressure experienced by NWA 8159 to between 15 and 23 GPa. The bulk composition of NWA 8159 is depleted in LREE, as observed for Tissint and other depleted shergottites; however, NWA 8159 is distinct from all other martian lithologies in its bulk composition and oxygen fugacity. Here, we obtain a Sm-Nd formation age of 2.37 ± 0.25 Ga for NWA 8159, which represents an interval in Mars geologic time which, until recently, was not represented in the other martian meteorite types. The bulk rock 147 Sm/ 144 Nd value of 0.37 ± 0.02 is consistent with it being derived directly from its source and the high initial ε 143 Nd value indicates this source was geochemically highly depleted. Cr, Nd, and W isotopic compositions further support a unique mantle source. While the rock shares similarities with the 2.4-Ga NWA 7635 meteorite, there are notable distinctions between the two meteorites that suggest differences in mantle source compositions and conditions of crystallization. Nevertheless, the two samples may be launch-paired. Finally, NWA 8159 expands the known basalt types, ages and mantle sources within the Mars sample suite to include a second igneous unit from the early Amazonian.

58 GEOSCIENCES↗

Geochemical and multi-isotopic ( 87 Sr/ 86 Sr, 143 Nd/ 144 Nd, 238 U/ 235 U) perspectives of sediment sources, depositional conditions, and diagenesis of the Marcellus Shale, Appalachian Basin, USA

Here, we investigate sediment sources, depositional conditions and diagenetic processes affecting the Middle Devonian Marcellus Shale in the Appalachian Basin, eastern USA, a major target of natural gas exploration. Multiple proxies, including trace metal contents, rare earth elements (REE), the Sm-Nd and Rb-Sr isotope systems, and U isotopes were applied to whole rock digestions and sequentially extracted fractions of the Marcellus shale and adjacent units from two locations in the Appalachian Basin. The narrow range of εNd values (from –7.8 to –6.4 at 390 Ma) is consistent with derivation of the clastic sedimentary component of the Marcellus Shale from a well-mixed source of fluvial and eolian material of the Grenville orogenic belt, and indicate minimal post-depositional alteration of the Sm-Nd system. While silicate minerals host >80% of the REE in the shale, data from sequentially extracted fractions reflect post-depositional modifications at the mineralogical scale, which is not observed in whole rock REE patterns.

58 GEOSCIENCES↗