Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “MAGNETRONS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,621 records · Page 90

Microstructural Characterisation of Giant Magnetoresistive Co/Cu Multilayers

Antiferromagnetically-coupled Co/Cu multilayers prepared by magnetron sputtering exhibit pronounced giant magnetoresistance (GMR) effect at room temperature. Using both diffraction and imaging techniques, we studied the in-plane and out-of-plane crystallographic and layering microstructural features of these multilayers. Dominant characteristic features associated with the multilayers, such as lateral and vertical columnar grain orientations as well as layer undulations and regularity, were identified. By deliberately introducing microstructural changes to the materials system using buffer layer and heat treatment, detailed microstructural analysis have provided an insight into the dependence of GMR on microstructures of the multilayers.

36 MATERIALS SCIENCE↗

ZnO Thin Film Ga s Sensor for CO

ZnO thin films were deposited onto corning glass substrates by rf magnetron sputtering system using ZnO targets. Films were deposited under rf power of 80 W at various deposition time. The distance between the target and substrate was held at 45 cm. A mixed Ar and O{sub 2} gas was introduced into the chamber at 4x10{sup -2} Torr. The structure of the deposited ZnO films was investigated by Scanning electron miscroscopy. The gas sensing properties were evaluated at various operation temperatures by measuring the changes of resistance of the sensor in air and in CO gas respectively using the gas sensing characterization system. The grain size was increased as the film thickness was increased during deposition. The sensor with 233 nm film thickness exhibited the highest sensitivity for CO gas.

36 MATERIALS SCIENCE↗

Determination of layer-thickness variation in periodic multilayer by x-ray reflectivity

A method basically determining individual layer thicknesses in actual periodic multilayers has been developed, that solves simultaneous equations of positions of peaks appearing in wavelet transform curve of x-ray grazing incidence reflectivity. The determination was demonstrated on a Ni/C periodic multilayer fabricated by magnetron sputtering. Using the layer thicknesses obtained by the method, further accurate of thickness, roughness, and density of each layer was performed by Parratt's model. The special feature that the topmost and bottom-most layers were thicker than other layers was clearly observed. The former is attributed to oxidation and the latter is attributed to the effect of deposition on thick substrate. The mean fluctuations of other layers are 2.6% in C layers and 4.2% in Ni layers attributed to random fluctuations at deposition. Numerical analysis and statistical hypothesis tests have been carried out to discuss noncumulative and cumulative layer-thickness fluctuations in fabrication process.

36 MATERIALS SCIENCE↗

Unraveling dielectric and electrical properties of ultralow-loss lead magnesium niobate titanate pyrochlore dielectric thin films for capacitive applications

PbO-MgO-Nb{sub 2}O{sub 5}-TiO{sub 2} (PMNT) pyrochlore thin films were prepared on Pt-coated silicon substrates by radio-frequency magnetron sputtering and postdeposition annealing method. Very interestingly, these pyrochlore-structured PMNT thin films exhibited ultralow dielectric losses, with a typical loss tangent as low as 0.001, and relatively high dielectric constants, typically {epsilon}{sub r{approx}}170. It was found that the relative permittivity slightly but continuously increased upon cooling without any signature of a structural phase transition, displaying a quantum paraelectriclike behavior; meanwhile, the PMNT pyrochlore thin films did not show any noticeable dielectric dispersion in the real part of permittivity over a wide temperature range (77-400 K). Their dielectric responses could, however, be efficiently tuned by applying a dc electric field. A maximum applied bias field of 1 MV/cm resulted in a {approx}20% tunability of the dielectric permittivity, giving rise to a fairly large coefficient of the dielectric nonlinearity, {approx}2.5x10{sup 9} J C{sup -4} m{sup -5}. Moreover, the PMNT pyrochlore films exhibited superior electrical insulation properties with a relatively high breakdown field (E{sub breakdown{approx}}1.5 MV/cm) and a very low leakage current density of about 8.2x10{sup -7} A/cm{sup 2} obtained at an electric field intensity as high as 500 kV/cm.

36 MATERIALS SCIENCE↗

Structural, magnetic, and transport properties of Permalloy for spintronic experiments

Permalloy (Ni{sub 80}Fe{sub 20}) is broadly used to prepare magnetic nanostructures for high-frequency experiments where the magnetization is either excited by electrical currents or magnetic fields. Detailed knowledge of the material properties is mandatory for thorough understanding its magnetization dynamics. In this work, thin Permalloy films are grown by dc-magnetron sputtering on heated substrates and by thermal evaporation with subsequent annealing. The specific resistance is determined by van der Pauw methods. Point-contact Andreev reflection is employed to determine the spin polarization of the films. The topography is imaged by atomic-force microscopy, and the magnetic microstructure by magnetic-force microscopy. Transmission-electron microscopy and transmission-electron diffraction are performed to determine atomic composition, crystal structure, and morphology. From ferromagnetic resonance absorption spectra the saturation magnetization, the anisotropy, and the Gilbert damping parameter are determined. Coercive fields and anisotropy are measured by magneto-optical Kerr magnetometry. The sum of the findings enables optimization of Permalloy for spintronic experiments.

36 MATERIALS SCIENCE↗

Synthesis of L1{sub 0}-FePt perpendicular films with controllable coercivity and intergranular exchange coupling by interfacial microstructure control

A series of FePtBi/Au multilayers were fabricated by magnetron sputtering. The interfacial microstructure control of Bi and Au atoms and its effect on comprehensive properties of L1{sub 0}-FePt perpendicular films were carefully studied. Results show that: perpendicular magnetic anisotropy of the L1{sub 0}-FePt film can be remarkably enhanced with the epitaxial inducement of Au atoms. On the other hand, intergranular exchange coupling (IEC) of the film is greatly decreased due to the isolation of FePt particles by nonmagnetic Au particles. Moreover, the controllable coercivity of the film can be realized by adjusting ordering degree of the film through diffusion of Bi atoms. Thus, an L1{sub 0}-FePt perpendicular film with controllable coercivity and no IEC is realized with the interfacial microstructure control of surfactant Bi and Au atoms.

36 MATERIALS SCIENCE↗

Magnetoresistance and transport properties of CoFeB/MgO granular systems

Magnetoresistance and transport properties of ultrathin multilayers of CoFeB/MgO prepared by rf and dc magnetron sputtering were studied in the temperature range between 15 and 330 K. Due to the magnetic softness of CoFeB, this system offers a potentially high magnetoresistance at comparably low magnetic fields. At fixed MgO thickness of 0.7 nm, it undergoes a crossover from a granular to a multilayered structure with increasing thickness of CoFeB and metallic conduction is reached at around 0.8 nm. In the granular state, a ferromagnetic to superparamagnetic phase transition was observed at 130 K. Different charge transport phenomena were identified at different temperatures. A sharp increase in the magnetoresistance at low temperature can be attributed to higher order tunneling processes. By proper annealing procedures, an enhanced magnetoresistance of around 6% at room temperature and 14% at low temperature as well as an increase in the resistivity have been achieved.

36 MATERIALS SCIENCE↗

Rigorous extraction tunability of Si-integrated Ba{sub 0.3}Sr{sub 0.7}TiO{sub 3} thin film up to 60 GHz

400-nm-thick Ba{sub 0.3}Sr{sub 0.7}TiO{sub 3} thin films are deposited on high resistivity silicon by in situ radio frequency magnetron sputtering. Coplanar waveguides with 1 mum slot width are designed, with accurate knowledge frequency losses behavior, to determine ferroelectric thin-films properties up to 60 GHz. Permittivity, loss tangent, and tunability are extracted through measurements and home made finite element analysis. Tunability of 33% and 29%, with 30 V maximum applied voltage (electric field of 300 kV/cm), are measured at 5 GHz and 60 GHz, respectively, while the dielectric losses evolve from 0.5% to 5%. A brief highlight is proposed about tunable silicon integrated quarter wavelength transformer potentialities for impedance matching.

36 MATERIALS SCIENCE↗

Conduction noise absorption by ITO thin films attached to microstrip line utilizing Ohmic loss

For the aim of wide-band noise absorbers with a special design for low frequency performance, this study proposes conductive indium-tin oxide (ITO) thin films as the absorbent materials in microstrip line. ITO thin films were deposited on the polyimide film substrates by rf magnetron cosputtering of In{sub 2}O{sub 3} and Sn targets. The deposited ITO films show a typical value of electrical resistivity ({approx}10{sup -4} {Omega} m) and sheet resistance can be controlled in the range of 20-230 {Omega} by variation in film thickness. Microstrip line with characteristic impedance of 50 {Omega} was used for determining their noise absorbing properties. It is found that there is an optimum sheet resistance of ITO films for the maximum power absorption. Reflection parameter (S{sub 11}) is increased with decrease in sheet resistance due to impedance mismatch. On the while, transmission parameter (S{sub 21}) is decreased with decrease in sheet resistance due to larger Ohmic loss of the ITO films. Experimental results and computational prediction show that the optimum sheet resistance is about 100 {Omega}. For this film, greater power absorption is predicted in the lower frequency region than ferrite thin films of high magnetic loss, which indicates that Ohmic loss is the predominant loss parameter for power absorption in the low frequency range.

36 MATERIALS SCIENCE↗

Effects of deposition temperature on the effectiveness of hydrogen doping in Ga-doped ZnO thin films

Gallium-doped zinc oxide thin films were prepared on glass substrates by dc magnetron sputtering under various hydrogen contents in sputtering ambient. The carrier concentration of the films deposited at low-temperatures (80 and 160 deg. C) was increased due to the incorporation of hydrogen atoms, acting as shallow donors. A low resistivity of 4.0x10{sup -4} {Omega} cm was obtained for the film grown at 160 deg. C with H{sub 2} 10%, which has a carrier concentration of 8.2x10{sup 20}/cm{sup 3}. The beneficial effect of hydrogen doping was not observed for the films deposited at 270 deg. C. Both carrier concentration and mobility were decreased by the addition of hydrogen gas in the sputtering ambient. Variations in the electrical transport properties upon vacuum annealing showed that the difference is attributed to the thermal stability of interstitial hydrogen atoms in the films. The hydrogen incorporation was found to induce the lattice expansion and the free carrier absorption in near infrared range. The investigation of the structural and optical properties of the films upon annealing also revealed that the incorporated hydrogen atoms are unstable at high temperature, which is consistent with the results obtained in the electrical properties.

36 MATERIALS SCIENCE↗

ZnO as a buffer layer for growth of BiFeO{sub 3} thin films

Multiferroic BiFeO{sub 3} thin film was grown on the ZnO-buffered Pt/TiO{sub 2}/SiO{sub 2}/Si(100) substrate by off-axis radio frequency magnetron sputtering, where the ZnO buffer layer gave rise to a strong (110) texture for the BiFeO{sub 3} thin film. The resulting BiFeO{sub 3}/ZnO thin film exhibits diode-like and resistive hysteresis behavior, in which the resistive hysteresis and rectifying ratio are dependent on the applied voltage and temperature. The resistive switching behavior of the BiFeO{sub 3}/ZnO thin film is shown to relate to the trap-controlled space charge limited conduction and interface-limited Fowler-Nordheim tunneling, while the polarization reversal takes place in the BiFeO{sub 3} layer of the heterostructure. The BiFeO{sub 3}/ZnO thin film is also demonstrated with a higher remanent polarization (2P{sub r{approx}}153.6 {mu}C/cm{sup 2}), a much lower dielectric loss (tan {delta}{approx}0.012), and a better fatigue endurance as compared to those of the BiFeO{sub 3} thin film without a ZnO buffer layer, where the much reduced leakage is largely responsible for the enhanced ferroelectric behavior. The ZnO as a buffer layer for BiFeO{sub 3} significantly changes the dielectric relaxation and conduction mechanisms, when the dielectric relaxation and electrical conduction are governed by the thermal excitation of carriers from the second-ionization and short-range motion of oxygen vacancies, respectively, while the relaxation process remains the same over the entire temperature range of 20 to 200 deg. C investigated in the present study.

36 MATERIALS SCIENCE↗

Effect of Ti incorporation on the interfacial and optical properties of HfTiO thin films

Interfacial and optical properties of HfTiO films with different Ti concentration grown by radio frequency reactive magnetron sputtering have been investigated by x-ray photoelectron spectroscopy (XPS) and spectroscopy ellipsometry (SE). XPS spectra indicate that interfacial layer is formed unavoidably for Ti doped and undoped HfO{sub 2} thin films and the interfacial structure is stable for Ti doped films. The composition of interfacial layer is most likely silicate and SiO{sub x}. Meanwhile, SE results indicate that the band gap of HfTiO thin films decreases with the increase in Ti concentration. Further results show that the valence band offset ({Delta}E{sub v}) decreases from 2.32 to 1.91 eV while the conduction band offset ({Delta}E{sub c}) decreases from 2.05 eV to 0.99 with the increase in Ti content. The optical constants consist of refractive index and extinction coefficient have also been investigated to provide the valuable references to prepare and select the HfTiO thin films for future high-k gate dielectrics.

36 MATERIALS SCIENCE↗

Superlow friction of titanium/silicon codoped hydrogenated amorphous carbon film in the ambient air

Titanium/silicon codoped hydrogenated carbon film was deposited on the n-Si (100) substrates by reactive magnetron sputtering Ti80Si20 target in a mixture of argon and methane. Microstructure of the film was investigated using x-ray photoelectron spectroscopy, high-resolution transmission electron microscopy, Raman spectroscopy, and attenuated total reflectance Fourier transform infrared spectroscopy. The investigations have revealed that the film has an amorphous structure and consists of high sp{sup 2} hybridized carbon atoms and bonding hydrogen atoms. The mechanical and tribological properties were evaluated using a nanoindentor and a ball-on-disk tribometer, respectively. The film exhibits hardness of 9.6 GPa, high elastic recovery of 73.0% and high H/E ratio of 0.156. Most significant, the superlow friction ({mu}<0.01) and special low wear rate (2.4x10{sup -7} mm{sup 3} N{sup -1} m{sup -1}) was observed in ambient air with 40% relative humidity. Combining the results of scanning electron microscopy and Raman analyses of the worn surface, it is concluded that some mechanisms, e.g., transfer films, friction-induced graphitization, hydrogen-terminated carbon surface, tribochemical reaction, etc., could be together responsible for this superlow friction in the ambient air.

36 MATERIALS SCIENCE↗

Growth of Cu{sub 2}O on Ga-doped ZnO and their interface energy alignment for thin film solar cells

Cu{sub 2}O thin films are deposited by direct current reactive magnetron sputtering on borofloat glass and indium tin oxide (ITO) coated glass at room temperature. The effect of oxygen partial pressure on the structures and properties of Cu{sub 2}O thin films are investigated. We show that oxygen partial pressure is a crucial parameter in achieving pure phases of CuO and Cu{sub 2}O. Based on this finding, we fabricate heterojunctions of p-type Cu{sub 2}O with n-type gallium doped ZnO (GZO) on ITO coated glass substrates by pulsed laser deposition for GZO thin films. The energy band alignment for thin films of Cu{sub 2}O/GZO on ITO glass is characterized using high-resolution x-ray photoelectron spectroscopy. The energy band alignment for the Cu{sub 2}O/GZO heterojunctions is determined to be type II with a valence band offset of 2.82 eV and shows negligible effects of variation with gallium doping. The higher conduction band of the Cu{sub 2}O relative to that of GZO in the obtained band alignment shows that the heterojunctions are suitable for solar cell application based on energy levels consideration.

36 MATERIALS SCIENCE↗

Analysis of the degradation induced by focused ion Ga{sup 3+} beam for the realization of piezoelectric nanostructures

Piezoelectric nanostructures (islands of dimensions in the lateral size range 50-500 nm) have been fabricated by focused Ga{sup 3+} ion beam (FIB) etching on PbZr{sub 0.54}Ti{sub 0.46}O{sub 3} thin films obtained by magnetron sputtering. The degradation induced by the etching process is investigated through the evolution of electromechanical activity measured by means of local piezoelectric hysteresis loops produced by piezoresponse force microscopy. The analysis of surface potential is performed by kelvin force microscopy and the measurement of current-voltage curves is carried out by conducting atomic force microscopy. Two kinds of structures, namely one based on crystallized films and the other based on amorphous ones, were studied. In this latter case, the amorphous films are postannealed after etching to obtain crystallized structure. For the structures based on the crystallized and then etched films, no piezoelectric signal was registered that evidences a serious degradation of material induced by Ga{sup 3+} ion implantation. For the structures based on the films etched in amorphous state and then crystallized, the piezoresponse signal was near to that of the reference films (crystallized and not etched) whatever were the ion dose and the island dimensions. Even for very small lateral size (50 nm), no size effect was observed. The island shapes fabricated by Ga{sup 3+} FIB etching process (islands with less than 50 nm lateral size) show a limitation of FIB processing and electron beam lithography seems to be necessary.

36 MATERIALS SCIENCE↗

Amorphous copper tungsten oxide with tunable band gaps

We report on the synthesis of amorphous copper tungsten oxide thin films with tunable band gaps. The thin films are synthesized by the magnetron cosputtering method. We find that due to the amorphous nature, the Cu-to-W ratio in the films can be varied without the limit of the solubility (or phase separation) under appropriate conditions. As a result, the band gap and conductivity type of the films can be tuned by controlling the film composition. Unfortunately, the amorphous copper tungsten oxides are not stable in aqueous solution and are not suitable for the application of photoelectrochemical splitting of water. Nonetheless, it provides an alternative approach to search for transition metal oxides with tunable band gaps.

36 MATERIALS SCIENCE↗

Ab initio calculations and synthesis of the off-stoichiometric half-Heusler phase Ni{sub 1-x}Mn{sub 1+x}Sb

We perform a combined theoretical and experimental study of the phase stability and magnetism of the off-stoichiometric Ni{sub 1-x}Mn{sub 1+x}Sb in the half-Heusler crystal phase. Our work is motivated by the need for strategies to engineer the magnetism of potentially half-metallic materials, such as NiMnSb, for improved performance at elevated temperatures. By means of ab initio calculations we investigate Ni{sub 1-x}Mn{sub 1+x}Sb over the whole composition range 0{<=}x{<=}1 of Ni replacing Mn and show that at relevant temperatures, the half-Heusler phase should be thermodynamically stable up to at least x=0.20 with respect to the competing C38 structure of Mn{sub 2}Sb. Furthermore we find that half-Heusler Ni{sub 1-x}Mn{sub 1+x}Sb retains half-metallic band structure over the whole concentration range and that the magnetic moments of substitutional Mn{sub Ni} atoms display magnetic exchange interactions an order of magnitude larger than the Ni-Mn interaction in NiMnSb. We also demonstrate experimentally that the alloys indeed can be created by synthesizing off-stoichiometric Ni{sub 1-x}Mn{sub 1+x}Sb films on MgO substrates by means of magnetron sputtering.

36 MATERIALS SCIENCE↗

Microwave properties of epitaxial (111)-oriented Ba{sub 0.6}Sr{sub 0.4}TiO{sub 3} thin films on Al{sub 2}O{sub 3}(0001) up to 40 GHz

Perovskite Ba{sub 0.6}Sr{sub 0.4}TiO{sub 3} (BST) thin films have been grown on Al{sub 2}O{sub 3}(0001) substrates without/with inserting an ultrathin TiO{sub x} seeding layer by rf magnetron sputtering. X-ray diffraction and pole figure studies reveal that the film with the TiO{sub x} layer (12-A-thick) is highly oriented along the (111) direction and exhibits a good in-plane relationship of BST(111)||Al{sub 2}O{sub 3}(0001). The high frequency dielectric measurements demonstrate that the complex permittivity ({epsilon}={epsilon}{sup '}-j{epsilon}{sup ''}) is well described by a Curie-von Scheidler dispersion with an exponent of 0.40. The resulting epitaxial BST films show high permittivity ({approx}428) and tunability ({approx}41%, at 300 kV/cm and 40 GHz) and their microwave properties (1-40 GHz) potentially could be made suitable for tunable devices.

36 MATERIALS SCIENCE↗