Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “INDIUM”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,621 records · Page 90

Origin of Electronic and Optical Trends in Ternary In2O3(ZnO)n Transparent Conducting Oxides (n = 1, 3, 5): Hybrid Density Functional Theory Calculations

Ternary oxides formed from zinc and indium have demonstrated potential for commercial optoelectronic applications. We present state-of-the-art hybrid density functional theory calculations for Zn-poor and Zn-rich compositions of the crystalline In{sub 2}O{sub 3}(ZnO){sub n} compounds. We reveal the origin of the redshift in optical transitions compared to the two component oxides: symmetry forbidden band-edge transitions in In{sub 2}O{sub 3} are overcome on formation of the superlattices, with Zn-O contributions to the top of the valence band. Increasing n results in the localization of the conduction-band minimum on the In-O networks. This enhanced localization explains why Zn-poor compounds (lower n) exhibit optimal conductivity.

36 MATERIALS SCIENCE↗

Identification of fission-like events in the {sup 16}O + {sup 181}Ta system: Mass and isotopic yield distribution

In this paper, nuclear reaction cross sections for 24 fission-like fragments (30{<=}Z{<=}60) have been measured for the 6.5 MeV/A {sup 16}O + {sup 181}Ta system. The recoil-catcher activation technique was employed followed by off-line {gamma} spectroscopy. The isotopic yield distributions for yttrium and indium isotopes have been obtained from the experimental data. The variance of the presently measured isotopic yield distributions have been found to be in agreement with the literature values. However, the variance of the mass distribution of fission residues has found to be narrower as compared to other relatively heavier systems. A self-consistent approach to determining the isobaric charge dispersion parameters has been adopted. The measured fission cross sections at 97 and 100 MeV are satisfactorily described by a statistical model code. An attempt has been made to explain the production cross sections of intermediate mass residues in the fission of heavy residues populated via complete and/or incomplete fusion processes.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Progress Toward a Stabilization and Preconditioning Protocol for Polycrystalline Thin-Film Photovoltaic Modules

Cadmium telluride (CdTe) and copper indium gallium diselenide (CIGS) thin-film photovoltaic (PV) modules can exhibit substantial variation in measured performance depending on prior exposure history. This study examines the metastable performance changes in these PV modules with the goal of establishing standard preconditioning or stabilization exposure procedures to mitigate measured variationsprior to current-voltage (IV) measurements.

14 SOLAR ENERGY↗

Photoluminescence Imaging Characterization of Thin-Film InP

Indium phosphide grown using a novel vapor-liquid-solid method is a promising low-cost material for III-V single-junction photovoltaics. In this work, we characterize the properties of these materials using photoluminescence (PL) imaging, time-resolved photoluminescence (TRPL), and microwave-reflection photoconductive decay (u-PCD). PL image data clearly shows the emergence of a self-similar dendritic growth network from nucleation sites, while zoomed-in images show grain structure and grain boundaries. Single photon TRPL data shows initial surface-dominated recombination, while two-photon excitation TRPL shows a lifetime of 10 ns. Bulk carrier lifetime may be as long as 35 ns as measured by u-PCD, which can be less sensitive to surface recombination.

14 SOLAR ENERGY↗

12.3% Efficient Lifted-Off and Reconstructed As-Doped CdTe Thin Film Solar Cell

CdTe:As devices grown by MOCVD in the superstrate configuration have been reconfigured to a substrate structure, by employing a cleaving and reconstruction technique. Indium and aluminium doped Zinc oxide (IZO and AZO) layers were used as the transparent front interface without a metal grid. A substrate efficiency of 12.3% was realized with AZO front contact, retaining 80% of the superstrate device efficiency and an impressive approximately 99% of the open-circuit voltage. The IZO-based substrate device on the other hand performed at approximately 69 % retained efficiency. The crucial role of front interfaces is highlighted by the two contacts used here. The results in this work show promise for the development of highly efficient substrate CdTe:As devices.

II-VI semiconductor materials↗

Gamma-Ray Response of Semi-Insulating CdMnTe Crystals

Semi-insulating Cd{sub 0.9}Mn{sub 0.1}Te:In crystals are grown by vertical Bridgman method. The segregation coefficient of Mn in CdTe is nearly 1 so that all the CdMnTe samples obtained from one ingot have nearly a same Mn composition. Also sulfur-based passivation effectively prevent the formation of Te-oxide but large amount of Mn exist as a MnO on the CdMnTe surface. The resistivity of CdMnTe samples are low 10{sup 10} Omegacm and well resolved {sup 241}Am gamma peaks are seen for all detectors. The difference in spectral response can be attributed to the effect of excess Te and conductivity change due to over-compensation induced by indium segregation in CdMnTe. The mobility-lifetime products evaluated from the dependence of peak location on the bias voltage are 1 times 10{sup -3} cm{sup 2}/V. The higher mobility-lifetime products in our CdMnTe crystals than other previous reports are assumed due to minimization of impurity contents in MnTe by several zone refining process.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Correlation of chemical composition and electrical properties of rf sputtered alumina films

Alumina films were prepared by radio frequency magnetron sputtering from an aluminum oxide target on an indium tin oxide covered glass. The purpose of the study was to test the influence of the sputter parameters on the elemental composition, surface morphology, and electrical insulation properties (breakdown fields and leakage currents). Tested parameters were the sputter gas (Ar) pressure, the sputter rate, the sputter power, the sputter gas composition (Ar:O{sub 2}), the conditioning of the target, the residual base pressure, and the substrate temperature. The surface morphology of the films was investigated by atomic force microscopy. Depth profiles of the elemental compositions were measured by elastic recoil detection using energetic heavy ions, and the insulation properties were investigated by current voltage measurements and impedance spectroscopy. The main finding is that the leakage currents increase by about five orders of magnitude, if the atomic ratio of O:Al increases from 1.35 to 2.0. In parallel the breakdown fields decrease by a factor of 100, and the character of the breakdowns changes from soft to hard. The highest breakdown fields (2.4 MV/cm) and smallest leakage currents (6.5x10{sup -8} A/cm{sup 2} at 2.0 MV/cm) are obtained for slightly Al rich films with small atomic concentrations of H (<0.5 at. %). These films were sputtered in pure Ar and under the lowest possible pressure of the residual gas.

36 MATERIALS SCIENCE↗

Photovoltaic manufacturing: Present status, future prospects, and research needs

In May 2010 the United States National Science Foundation sponsored a two-day workshop to review the state-of-the-art and research challenges in photovoltaic (PV) manufacturing. This article summarizes the major conclusions and outcomes from this workshop, which was focused on identifying the science that needs to be done to help accelerate PV manufacturing. A significant portion of the article focuses on assessing the current status of and future opportunities in the major PV manufacturing technologies. These are solar cells based on crystalline silicon (c-Si), thin films of cadmium telluride (CdTe), thin films of copper indium gallium diselenide, and thin films of hydrogenated amorphous and nanocrystalline silicon. Current trends indicate that the cost per watt of c-Si and CdTe solar cells are being reduced to levels beyond the constraints commonly associated with these technologies. With a focus on TW/yr production capacity, the issue of material availability is discussed along with the emerging technologies of dye-sensitized solar cells and organic photovoltaics that are potentially less constrained by elemental abundance. Lastly, recommendations are made for research investment, with an emphasis on those areas that are expected to have cross-cutting impact.

14 SOLAR ENERGY↗

In/ITO whisker and optoelectronic properties of ITO films deposited by ion beam sputtering

ITO films were deposited on a glass substrate using ion beam sputtering, with oxygen flow rates from 0.5 to 2 sccm. The films consisted of randomly oriented ITO nanoparticles and metallic indium (In) with {l_brace}101{r_brace} facets, following the specific crystallographic relationship of [010]{sub In}//[110]{sub ITO}; (001){sub In}//(001){sub ITO} with habit planes (100){sub In}//(011){sub ITO}, when fabricated using a low oxygen flow rate. Oxygen flow rate in excess of 2.0 sccm results in the growth of amorphous films. The epitaxial In nanoparticles probably act as seeds for the development of curved ITO whiskers as small as 10 nm and extend up to 100 nm in length along the [100] direction, with poorly defined shape, possibly due to the tapering and bending of the whisker to form a tilt boundary about the [011] zone axis of the ITO. The ITO whisker growth was facilitated by the In globular tips in the vapor-liquid-solid growth mechanism. The films prepared using a series of oxygen flow rates showed different chemical-bonding states, electric resistivity and optical transparency; as a result of phase and microstructural changes.

36 MATERIALS SCIENCE↗

Nanopillar ITO electrodes via argon plasma etching

The authors demonstrate the formation of vertically aligned indium tin oxide (ITO) nanopillars by exposing planar ITO films to Ar plasma, the conditions of which determine the size, spacing, and aspect ratio of the pillars. Annealing in air and forming gas is used to recover and optimize the optical transmittance and electrical conductivity of the nanopillar films. The final product is an ITO film whose superior optical transmittance and strong electrical conductivity combine with its robust columnar morphology and processing scalability to make it suitable for use in highly absorbing organic solar cells.

36 MATERIALS SCIENCE↗

Formation of zinc oxide films using submicron zinc particle dispersions

The thermal oxidation of submicron metallic Zn particles was studied as a method to form nanostructured ZnO films. The particles used for this work were characterized by electron microscopy, x-ray diffraction and thermal analysis to evaluate the Zn-ZnO core shell structure, surface morphology, and oxidation characteristics. Significant nanostructural changes were observed for films annealed to 400 °C or higher, where nanoflakes, nanoribbons, nanoneedles and nanorods were formed as a result of stress induced fractures arising in the ZnO outer shell due to differential thermal expansion between the metallic Zn core and the ZnO shell. Mass transport occurs through these defects due to the high vapor pressure for metallic Zn at temperatures above 230 °C, whereupon the Zn vapor rapidly oxidizes in air to form the ZnO nanostructures. The Zn particles were also incorporated into zinc indium oxide precursor solutions to form thin film transistor test structures to evaluate the potential of forming nanostructured field effect sensors using simple solution processing.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Controlled ambient and temperature treatment of InGaZnO thin film transistors for improved bias-illumination stress reliability

The failure mechanisms arising from the instability in operation of indium gallium zinc oxide based thin film transistors (TFTs) upon prolonged real application stresses (bias and illumination) have been extensively studied and reported. Positive and negative gate bias conditions, along with high photonic energy wavelengths within visible light spectrum are used as stress conditions. The increased carrier concentration due to photonic excitation of defects within bandgap and ionization of deep level vacancies is compensated by the reduction in off currents under illumination due to the trapping of carriers in the intermetal dielectric. Band lowering at the source-channel junction due to accumulation of negative carriers repelled due to negative gate bias stress further causes high carrier flow into the channel and drives the devices into failure. The defect identification during failure and degradation assisted in proposing suitable low temperature post processing in specific ambients. Reliability tests after specific anneals in oxygen, vacuum, and forming gas ambients confirm the correlation of the defect type with anneal ambient. Annealed TFTs demonstrate high stabilities under illumination stresses and do not fail when subjected to combined stresses that cause failure in as-fabricated TFTs. Oxygen and forming gas anneals are impactful on the reliability and opens an area of study on donor and vacancy behavior in amorphous mixed oxide based TFTs. The subthreshold swing, field-effect mobilities, and off currents provide knowledge on best anneal practices by understanding role of hydrogen and oxygen in vacancy annihilation and transistor switching properties.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Plasmon-enhanced photocurrent of Ge-doped InGaO thin film transistors using silver nanoparticles

Germanium-doped indium-gallium oxide (GIGO) thin film transistors (TFTs) decorated with silver (Ag) nanoparticles (NPs) were prepared to study the plasmon effect. GIGO films of various thicknesses were deposited on SiO{sub 2}/Si substrates, and Ag NPs (∼25 nm in diameter) were formed using a thermal evaporator and a postannealing process. The Ag NPs effectively absorbed light in the wavelength range of 500 and 600 nm, which corresponds to the plasmonic effect. Due to the plasmon resonance of Ag NPs, a significantly enhanced photocurrent was observed on the devices. The current increased by 348% with exposure to light when the Ag NPs were formed at the interface between the 10-nm-thick GIGO film and SiO{sub 2} substrate. The increased photocurrent revealed the presence of strong coupling between the localized plasmon and electrical carrier of the devices. The results show that the photocurrent of GIGO TFTs can be greatly enhanced when the plasmonic Ag NPs are located in the channel region of the devices.

36 MATERIALS SCIENCE↗

Pilot-scale electron cyclotron resonance-metal organic chemical vapor deposition system for the preparation of large-area fluorine-doped SnO{sub 2} thin films

The authors report the surface morphology, optical, electrical, thermal and humidity impacts, and electromagnetic interference properties of fluorine-doped tin oxide (SnO{sub 2}:F or “FTO”) thin films on a flexible polyethylene terephthalate (PET) substrate fabricated by a pilot-scale electron cyclotron resonance–metal organic chemical vapor deposition (PS ECR-MOCVD). The characteristics of large area FTO thin films were compared with a commercially available transparent conductive electrode made of tin-doped indium oxide (ITO), prepared with an identical film and PET thickness of 125 nm and 188 μm, respectively. The results revealed that the as-prepared FTO thin films exhibited comparable performances with the incumbent ITO films, including a high optical transmittance of 97% (substrate-subtracted), low electrical resistivity of about 5 × 10{sup −3} Ω cm, improved electrical and optical performances due to the external thermal and humidity impact, and an excellent shielding effectiveness of electromagnetic interference of nearly 2.3 dB. These excellent performances of the FTO thin films were strongly attributed to the design of the PS ECR-MOCVD, which enabled a uniform plasma environment resulting from a proper mixture of electromagnetic profiles and microwave power.

36 MATERIALS SCIENCE↗

Metastable Electrical Characteristics of Polycrystalline Thin-Film Photovoltaic Modules upon Exposure and Stabilization: Preprint

The significant features of a series of stabilization experiments conducted at the National Renewable Energy Laboratory (NREL) between May 2009 and the present are reported. These experiments evaluated a procedure to stabilize the measured performance of thin-film polycrystalline cadmium telluride (CdTe) and copper indium gallium diselenide (CIGS) thin-film photovoltaic (PV) modules. Thecurrent-voltage (I-V) characteristics of CdTe and CIGS thin-film PV devices and modules exhibit transitory changes in electrical performance after thermal exposure in the dark and/or bias and light exposures. We present the results of our case studies of module performance versus exposure: light-soaked at 65 degrees C; exposed in the dark under forward bias at 65 degrees C; and, finally,longer-term outdoor exposure. We find that stabilization can be achieved to varying degrees using either light-soaking or dark bias methods and that the existing IEC 61646 light-soaking interval may be appropriate for CdTe and CIGS modules with one caveat: it is likely that at least three exposure intervals are required for stabilization.

14 SOLAR ENERGY↗

Catalytic Activity of Li{sub 1+x}Hf{sub 2–x}In{sub x}(PO{sub 4}){sub 3}-Based NASICON-Type Materials for Ethanol Conversion Reactions

Li{sub 1+} {sub x}Hf{sub 2–x}In{sub x}(PO{sub 4}){sub 3} (x = 0, 0.05, 0.1) materials have been prepared by solid-state reactions and characterized by X-ray diffraction, low-temperature nitrogen adsorption measurements, and scanning electron microscopy. The materials consist of NASICON-type lithium hafnium double phosphates with a hexagonal structure. Milling in a planetary mill has been found to increase the specific surface area of the Li{sub 1+} {sub x}Hf{sub 2–x}In{sub x}(PO{sub 4}){sub 3} materials by almost one order of magnitude (from 1.5 to 13 m{sup 2}/g in the case of LiHf{sub 2}(PO{sub 4}){sub 3}). The materials with a larger surface area exhibit catalytic activity for ethanol dehydration reactions and are less active for ethanol dehydrogenation. Ethanol conversion predominantly yields diethyl ether at low temperatures and ethylene at higher temperatures. The diethyl ether selectivity of the catalytic processes reaches 85% at 350°C, with 60% conversion, and the ethylene selectivity reaches 96% at 510°C, with 100% conversion. Indium doping raises the high-temperature acetaldehyde selectivity from 4 to 8% and leads to the formation of C{sub 4} hydrocarbons as reaction products. C{sub 4} selectivity reaches 15 and 17% in the case of the Li{sub 1.05}Hf{sub 1.95}In{sub 0.05}(PO{sub 4}){sub 3} and Li{sub 1.1}Hf{sub 1.9}In{sub 0.1}(PO{sub 4}){sub 3} materials, respectively (420°C, 97 and 92% conversion, respectively).

36 MATERIALS SCIENCE↗

Controlling the macro- and micro-processes influenсing harmonic generation in laser-produced plasmas

We review the studies of the spatial conditions for the quasi-phase-matching in the multi-jet laserproduced silver plasma. These studies of the off-axis and on-axis spatial components of harmonics allowed the demonstration of significant enhancement of a group of harmonics in the latter case. We analyze the role of plasma emission, together with phase-mismatch, that deteriorate the conditions of high-order harmonic generation due to significant phase distortion between the interacting waves. We also discuss the resonanceinduced enhancement of single harmonic and the quasi-phase-matching-induced enhancement of the group of harmonics during propagation of the tunable mid-infrared femtosecond pulses through the perforated laser-produced indium plasma. Those studies have shown that the enhancement of harmonics using the macro-process of quasi-phase-matching is comparable with the one using micro-process of resonantly enhanced harmonic. We conclude that joint implementation of the two methods of the increase of harmonic yield could be a useful tool for generation of strong short-wavelength radiation in different spectral regions.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

The Influence of the Spatial Orientation of ZnO Nanorods on the Luminescence Spectrum

Zinc oxide (ZnO) nanorods were grown on glass substrates coated with a conducting indium tin oxide film using the hydrothermal method. The nanorods are 2–2.5 μm long and 70–200 nm in diameter. Under UV irradiation the nanorods exhibit photoluminescence with a maximum at 382 nm. It is found that changes in angle between the nanorods growth direction and the emission recording direction give rise to an appearance of a violet emission band centered at ∼400 nm. It is possible dependence of the luminescence spectrum on the ZnO nanorods’ spatial orientation is due to localization of the violet emission centers in the surface layer.

77 NANOSCIENCE AND NANOTECHNOLOGY↗