Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Homogenization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,621 records · Page 90

Phase Constituents of Al-rich U-Mo-Al Alloys Examined by Transmission Electron Microscopy

To supplement the understanding of diffusional interactions involving Al-rich region of the U-Mo-Al system, alloys with composition 85.7Al-11.44U-2.86Mo and 87.5Al-10U-2.5Mo in at.%, were examined to determine the equilibrium phase constituents at 500?C. These alloys were triple arc-melted, homogenized at 500?C for 200 hours, and water-quenched to preserve the high temperature microstructure. X-ray diffraction, scanning electron microscopy (SEM) with energy dispersive x-ray spectroscopy (XEDS), and transmission electron microscopy (TEM) with high angle annular dark field (HAADF) imaging via scanning transmission electron microscopy (STEM) were employed for the characterization. Alloy specimens for TEM/STEM were prepared using site-specific focused ion beam (FIB) in-situ lift-out (INLO) technique. Despite the homogenization time and temperature, five different phases, namely fcc-Al solid solution, cubic-UAl3, orthorhombic-UAl4, hexagonal-U6Mo4Al43 and diamond cubic-UMo2Al20, were observed. Based on U-Al, U-Mo and Al-Mo binary phase diagrams, previously proposed U-Mo-Al isotherms, and the solidification microstructure of these alloys, the Al-rich region of the equilibrium ternary isotherm at 500?C was constructed. The fcc-Al solid solution, orthorhombic-UAl4, and diamond cubic-UMo2Al20, which were determined to be the equilibrium phases in 85.7Al-11.44U-2.86Mo and 87.5Al-10U-2.5Mo alloys.

99 GENERAL AND MISCELLANEOUS↗

Core materials development for the fuel cycle R&D program

The Fuel Cycle Research and Development program is investigating methods of burning minor actinides in a transmutation fuel. One of the challenges of achieving this goal is to develop fuels capable of reaching extreme burnup levels (e.g. 40%). To achieve such high burnup levels’ fast reactor core materials (cladding and duct) must be able to withstand very high doses (>300 dpa design goal) while in contact with the coolant and the fuel. Thus, these materials must withstand radiation effects that promote low temperature embrittlement, radiation induced segregation, high temperature helium embrittlement, swelling, accelerated creep, corrosion with the coolant, and chemical interaction with the fuel (FCCI). To develop and qualify materials to a total fluence greater than 200 dpa requires development of advanced alloys and irradiations in fast reactors to test these alloys. Test specimens of ferritic/martensitic alloys (T91/HT-9) previously irradiated in the FFTF reactor up to 210 dpa at a temperature range of 350– 750 °C are presently being tested. This includes analysis of a duct made of HT-9 after irradiation to a total dose of 155 dpa at temperatures from 370 to 510 °C. Compact tension, charpy and tensile specimens have been machined from this duct and mechanical testing as well as SANS and Mossbauer spectroscopy are currently being performed. Initial results from compression testing and Charpy testing reveal a strong increase in yield stress (~400 MPa) and a large increase in DBTT (up to 230 °C) for specimens irradiated at 383 °C to a dose of 28 dpa. Less hardening and a smaller increase in DBTT was observed for specimens irradiated at higher temperatures up to 500 °C. Advanced radiation tolerant materials are also being developed to enable the desired extreme fuel burnup levels. Specifically, coatings are being developed to minimize FCCI, and research is underway to fabricate large heats of radiation tolerant oxide dispersion steels with homogeneous oxide dispersions.

Maloy, S. A.↗

Fiber/Matrix Interfacial Thermal Conductance Effect on the Thermal Conductivity of SiC/SiC Composites

SiC/SiC composites used in fusion reactor applications are subjected to high heat fluxes and require knowledge and tailoring of their in-service thermal conductivity. Accurately predicting the thermal conductivity of SiC/SiC composites as a function of temperature will guide the design of these materials for their intended use, which will eventually include the effects of 14-MeV neutron irradiations. This paper applies an Eshelby-Mori-Tanaka approach (EMTA) to compute the thermal conductivity of unirradiated SiC/SiC composites. The homogenization procedure includes three steps. In the first step EMTA computes the homogenized thermal conductivity of the unidirectional (UD) SiC fiber embraced by its coating layer. The second step computes the thermal conductivity of the UD composite formed by the equivalent SiC fibers embedded in a SiC matrix, and finally the thermal conductivity of the as-formed SiC/SiC composite is obtained by averaging the solution for the UD composite over all possible fiber orientations using the second-order fiber orientation tensor. The EMTA predictions for the transverse thermal conductivity of several types of SiC/SiC composites with different fiber types and interfaces are compared to the predicted and experimental results by Youngblood et al.

SiC/SiC composite, thermal conductance, thermal co↗

Phase transformation kinetics in rolled U-10 wt. % Mo foil: Effect of post-rolling heat treatment and prior γ-UMo grain size

The effect of sub-eutectoid heat treatment on the phase transformation behavior in rolled U-10 wt.percent Mo (U10Mo) foils was systematically investigated. The as-cast 5 mm thick foils were initially homogenized at 900 degrees C for 48 hours and were hot rolled to 2 mm and later cold rolled down to 0.2 mm. Three starting microstructures were evaluated: (i) hot- + cold-rolled to 0.2 mm (as-rolled condition), (ii) hot- + cold-rolled to 0.2 mm + annealed at 700 deg. C for 1 hour, and (iii) hot- + cold-rolled to 0.2 mm + annealed at 1000 deg. C for 60 hours. U10Mo rolled foils went through various degrees of decomposition when subjected to the sub-eutectoid heat-treatment step and formed a lamellar microstructure through a cellular reaction mostly along the previous γ-UMo grain boundaries.

Jana, Saumyadeep↗

A multiscale microstructural approach to ductile-phase toughened tungsten for plasma-facing materials

Increasing fracture toughness and decreasing the ductile-brittle transition temperature of a tungsten-alloy has been shown to be feasible by ductile-phase toughening of tungsten. In this method, a ductile phase is included in a brittle tungsten matrix to prevent fracture propagation by crack bridging or crack deflection. This paper models the deformation behavior of ductile phase toughened tungsten materials such as tungsten-copper composites using a multiscale modeling approach that involves a microstructural dual-phase (copper-tungsten) region of interest where the constituent phases are finely discretized and are described by a continuum damage mechanics model. Large deformation, damage and fracture are allowed to occur and are modeled in this region that is connected to the adjacent homogenized elastic regions to form a macroscopic structure such as a test specimen. This paper illustrates such a multiscale modeling approach to analyze un-notched and single-edge notched (SENB) tungsten-copper composite specimens subjected to three-point bending. The predicted load-displacement responses and crack propagation patterns are compared to the corresponding experimental results to validate the model.

Nguyen, Ba Nghiep↗

Analytical local stress model for UMo/Al dispersion fuel

The stress evolution occurring in UMo/Al dispersion fuel is important since it affects the fuel performance during irradiation. In this study, a new analytical model was developed to predict the local stresses in UMo/Al dispersion fuel. In the model, a hypothetical unit sphere composed of a UMo fuel particle, interaction layer (IL), and Al matrix was considered, and the governing equations for the stress-strain relationship, strain-displacement, and mechanical equilibrium were established using a spherical coordinate system. The mathematical derivations were obtained for local stresses in the radial and circumferential direction using a thick-walled sphere model. Furthermore, this analytical model employed the stress distribution as the boundary condition, which is calculated using a finite element model with homogenized fuel meat. The developed model’s solution scheme was verified against Abaqus solutions obtained for two irradiated plates with heterogeneous meat. The model calculated consistent results for interfacial stresses in the IL and Al matrix, indicating that the newly developed model was reliable when simultaneously calculating fission gas pressurization on the UMo/IL/Al composite, and the use of the stress distribution in the homogenized fuel meat as the boundary condition for the analytical model was acceptable

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Impacts of annealing treatment on the microstructure of U-Mo monolithic fuel plates

The objective of this paper is to analyze the effect of different heat treatments on the fuel microstructure and texture in laboratory scale monolithic U-Mo fuel plates. Such analyses are relevant as they could possibly inform future fabrication methods for the optimization of microstructure and of material properties to ultimately improve fuel performance during irradiation. For this reason, detail characterization including Energy x-ray dispersive spectroscopy (EDS) and electron backscattered diffraction (EBSD) techniques were applied on U-Mo plates fabricated with different heat treatments to understand the influence of fabrication on fuel microstructure. Here, U-Mo fresh fuel specimens with or without annealing treatments (homogenization and stress release annealing) after rolling were analyzed in this work. In this study for the first time EBSD was systematically used to analyze the heat treatments influence on texture present in fresh fuel monolithic U-Mo fuel plates. Such changes were connected to other known microstructural and chemical changes. In this work minimization of molybdenum concentration variation and gamma phase decomposition of the U-Mo fuel core after homogenization was observed. Also, an increase in the interaction layer of the U-Mo fuel core with the Zr interlayer diffusion barrier was observed with the UZr 2 growing up to 1 µm in thickness. Such microstructural changes were aligned to the changes in texture and grain structure. Indeed, common texture observed in body-centered cubic (BCC) metal after cold rolling (e.g., α, ξ, γ fibers) were minimized by the annealing/homogenization process. Moreover, grain structure was influenced by the fabrication route with elongated grains formed in the rolled sample and equiaxed grains found after annealing. Such features are relevant since the formation of microstructural features formed during fuel fabrication can impact fuel performance in reactor.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Structure characterization and steam oxidation performance of U 3 Si 2 with Zr alloying additions

Research and development of high uranium density fuels supports the on-going effort to enhance reactor technology, safety, performance, and economics. Among high uranium density fuels, U 3 Si 2 is a favored fuel candidate due to its higher uranium density and improved thermal conductivity when compared to traditional UO 2 . While U 3 Si 2 demonstrates an improved fuel economy, it suffers from rapid degradation when exposed to water at T > 300°C. In order for U 3 Si 2 to be implemented in water cooled reactors, the water reaction must be understood and mitigated. Reported here is the performance of Zr alloying additions to U 3 Si 2 exposed to high temperature steam oxidation environments. Here, the investigation shows that homogenization heat treatment contributes to a delayed onset of oxidation and an improved homogeneity throughout the arc-melt fabricated alloyed compositions. Of the pre- and post-annealed samples, the post-annealed 7 vol% Zr addition exhibited the highest onset temperature of oxidation. A preliminary computational investigation to complement the experimental analysis assesses the solubility of Zr in U 3 Si 2 and its incorporation in the crystal lattice.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Assessing the viability of a new subsize tensile specimen geometry for evaluation of structural nuclear and additively manufactured materials

The use of subsize specimens in nuclear materials testing has been a subject of ongoing interest due to radiation safety concerns and resource conservation needs. It is also of interest in additive manufacturing (AM), also known as 3D-printing, as subsize specimens can more accurately represent the behavior of the small, intricate geometries often produced using AM. A novel, extremely small geometry, called the Subsize Teeny (SST) was recently developed and is of interest for implementation. Given its extraordinarily small size and the complexities associated with subsize specimen testing, adequate vetting of this geometry is necessary to ensure data quality. Here, a variety of unirradiated nuclear structural materials were tested in the SST geometry and compared against the well-established SSJ3 geometry. In addition, two case studies implementing the SST as a screening geometry for AM materials were also conducted. The question of SST viability was found to be highly nuanced and will often be dependent on the context or application in question. It was determined, however, that the SST is a largely invalid geometry for exceptionally coarse-grained materials or in cases where the physical defect volume equals or exceeds 0.1 % or where the specimen machining parameters result in significant surface alterations. On the other hand, it was determined that the SST may be employed with confidence if the test material is nearly or totally free of physical defects, isotropic, demonstrates homogeneous plastic deformation, and possesses a fine-grained, nearly or totally homogeneous microstructure with at least twelve slip systems.

Additive manufacturing↗

A filtering strategy for the numerical convergence of radiation transport through purely absorbing particle clouds

Radiation transport through particle clouds plays a major role in many engineering applications. Here in this paper, we study this problem by means of solving the radiative transport equation (RTE) on a Eulerian continuous domain. The particle clouds are generated through direct numerical simulation of Navier-Stokes equations coupled with Lagrangian particle transport at different Stokes numbers. We confirm the earlier observation noted in the literature that the solution to the RTE on Eulerian mesh diverges when the Eulerian mesh size is of the order of the particle diameter. This observation is often called the homogenization error stemming from relegation of number density onto the Eulerian domain. In order to circumvent this divergence problem, we propose a filtering strategy that spreads the information of the particles to the neighboring cells in a way that the representation of the particles remains the same even when the mesh size is smaller than that of the particle size. We show through our simulations that our filtering strategy solves the issue of homogenization error for the cases where the Beer-Bouger law is valid.

42 ENGINEERING↗

Solubility and release of fenbufen intercalated in Mg, Al and Mg, Al, Fe layered double hydroxides (LDH): The effect of Eudragit S 100 covering

Following different preparation routes, fenbufen has been intercalated in the interlayer space of layered double hydroxides with Mg{sup 2+} and Al{sup 3+} or Mg{sup 2+}, Al{sup 3+} and Fe{sup 3+} in the layers. Well crystallized samples were obtained in most of the cases (intercalation was not observed by reconstruction of the MgAlFe matrix), with layer heights ranging between 16.1 and 18.8 A. The presence of the LDH increases the solubility of fenbufen, especially when used as a matrix. The dissolution rate of the drug decreases when the drug is intercalated, and is even lower in those systems containing iron; release takes place through ionic exchange with phosphate anions from the solution. Preparation of microspheres with Eudragit S 100 leads to solids with an homogeneous, smooth surface with efficient covering of the LDH surface, as drug release was not observed at pH lower than 7. - Graphical abstract: LDHs containing Mg, Al, Fe increase fenbufen solubility, release takes place through ionic exchange with phosphate anions from the medium. Spherical solids with homogeneous, smooth surface are formed when using Eudragit S 100, efficiently covering the LDH surface. Display Omitted

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Study of carbon dioxide adsorption on a Cu-nitroprusside polymorph

A careful structural characterization was carried out to unequivocally determine the structure of the synthesized material. The TGA, DRIFTS and a Pawley fitting of the XRD powder profiles indicate that the hydrated and in situ dehydrated polymorph crystallizes in the orthorhombic space group Pnma. Meanwhile, the CO{sub 2} isosteric heat of adsorption appears to be independent of loading with an average value of 30 kJ/mol. This translates to a physisorption type interaction, where the adsorption energy corresponding to wall and lateral interactions are mutually compensated to produce, an apparently, homogeneous adsorption energy. The somewhat high adsorption energy is probably due to the confinement of the CO{sub 2} molecules in the nitroprusside pores. Statistical Physics and the Dubinin theory for pore volume filling allowed model the CO{sub 2} equilibrium adsorption process in Cu-nitroprusside. A DRIFTS test for the adsorbed CO{sub 2} displayed a peak at about 2338 cm{sup -1} that was assigned to a contribution due to physical adsorption of the molecule. Another peak found at 2362 cm{sup -1} evidenced that this molecule interacts with the Cu{sup 2+}, which appears to act as an electron accepting Lewis acid site. The aim of the present paper is to report a Pnma stable Cu-nitroprusside polymorph obtained by the precipitation method that can adsorb carbon dioxide. -- Graphical abstract: The adsorption space of a very well characterized Cu-nitroprusside polymorph, applying carbon dioxide as probe molecule, was studied. Display Omitted Highlights: {yields} Accurate information about the geometry of the adsorption space was provided. {yields} Truthful data about the interactions within the adsorption space was presented. {yields} The structure of the tested Cu-NP polymorph was established. {yields} Was evidenced adsorbed CO{sub 2} molecules in the form of weakly bonded adducts. {yields} Is proposed that adsorbed molecules could change the Cu-NP magnetic properties.

36 MATERIALS SCIENCE↗

Selective decoration of nickel and nickel oxide nanocrystals on multiwalled carbon nanotubes

A simple route to selective decoration of nickel and nickel oxide nanocrystals on multiwalled carbon nanotubes (MWCNTs) using nickel acetylacetonate (NAA) was successfully achieved for the first time. The homogeneously decorated nanocrystals on MWCNTs were investigated for their structure and morphology by various techniques, such as powder X-ray diffraction, Fourier transform infrared spectroscopy, X-ray photoelectron spectroscopy, transmission electron microscopy, field emission scanning electron microscopy and thermogravimetric analysis. It was found that the size distributions of the nanocrystals on MWCNTs ranged from 8 to 15 nm and they were well resolved. The precursor, NAA, was effectively employed to impregnate the MWCNTs, which on calcination at suitable temperatures and in the presence of hydrogen and nitrogen atmosphere gave rise to nickel and nickel oxide nanocrystals, respectively. -- Graphical abstract: Nickel and nickel oxide nanocrystals were selectively and homogeneously decorated on multiwalled carbon nanotubes using nickel acetylacetonate, as a precursor in a simple and efficient route. Display Omitted Highlights: {yields} A simple route for decoration of nickel and nickel oxide nanocrystals on MWCNTs. {yields} Nickel acetylacetonate used as nickel source for the first time to impregnate on MWCNTs. {yields} Selective decoration was achieved by calcination in hydrogen and nitrogen atmospheres. {yields} The as-decorated nickel and nickel oxide nanocrystals are in the range of 8-15 nm.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Synthesis of high efficient Ca{sub 2}SiO{sub 4}:Eu{sup 2+} green emitting phosphor by a liquid phase precursor method

Green emitting Eu{sup 2+}-doped Ca{sub 2}SiO{sub 4} phosphors were synthesized by three different methods (a conventional solid state reaction (SSR) method, a novel liquid phase precursor approach using SiO{sub 2} sol (LPP-SiO{sub 2}(sol)) and water-soluble silicon compound (LPP-WSS)). The obtained phosphors exhibited a broad excitation spectrum ranging from 225 to 450 nm and a strong green emission peak at 502 nm due to the 4f{sup 6}5d{sup 1}{yields}4f{sup 7}({sup 8}S{sub 7/2}) transition of Eu{sup 2+}. The highest luminescent intensity was obtained for the samples fired at 1100 Degree-Sign C. The dependence of luminescence properties on Eu{sup 2+} concentration for the phosphors synthesized using LPP-WSS method was also examined from 0.1 to 5.0 mol% and the maximum emission intensity was observed at 3.0 mol% Eu{sup 2+}. A detailed analysis using various characterizations revealed that phosphors produced by the LPP-WSS process exhibited more homogenous phase distribution and higher luminescence intensity than those from the other two processes, which suggested the potential application of Ca{sub 2}SiO{sub 4}:Eu{sup 2+} in white light-emitting diodes and fluorescence lamps. - Graphical abstract: The synthesis of Eu{sup 2+} doped Ca{sub 2}SiO{sub 4} green emitting phosphors were carried out using LPP-SiO{sub 2}(sol), LPP-WSS and SSR methods. The adequate reaction of starting materials base on solution mixing and cellulose impregnating during LPP-WSS procedure resulted in single crystalline structure as well as fine morphology, and finally determined a superior luminescent intensity. Highlights: Black-Right-Pointing-Pointer Ca{sub 2}SiO{sub 4}:Eu{sup 2+} phosphor was synthesized by three methods (SSR, LPP-SiO{sub 2} and LPP-WSS). Black-Right-Pointing-Pointer Effect of different processes on the property of phosphor was studied. Black-Right-Pointing-Pointer Phosphor produced by LPP-WSS showed better homogenous phase and fluorescent property. Black-Right-Pointing-Pointer LPP-WSS approach was identified as the best method among these three approaches.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The system Ta-V-Si: Crystal structure and phase equilibria

Phase relations have been evaluated for the Ta-V-Si system at 1500 and 1200 Degree-Sign C. Three ternary phases were found: {tau}{sub 1}-(Ta,V){sub 5}Si{sub 3} (Mn{sub 5}Si{sub 3}-type), {tau}{sub 2}-Ta(Ta,V,Si){sub 2} (MgZn{sub 2}-type) and {tau}{sub 3}-Ta(Ta,V,Si){sub 2} (MgCu{sub 2}-type). The crystal structure of {tau}{sub 2}-Ta(Ta,V,Si){sub 2} was solved by X-ray single crystal diffraction (space group P6{sub 3}/mmc). Atom order in the crystal structures of {tau}{sub 1}-(Ta,V){sub 5}Si{sub 3} (Mn{sub 5}Si{sub 3} type) and {tau}{sub 3}-Ta(Ta,V,Si){sub 2} was derived from X-ray powder diffraction data. A large homogeneity range was found for {tau}{sub 1}-(Ta{sub x}V{sub 1-x}){sub 5}Si{sub 3} revealing random exchange of Ta and V at a constant Si content. At 1500 Degree-Sign C, the end points of the {tau}{sub 1}-phase solution (0.082{<=}x{<=}0.624) are in equilibrium with the solutions (Ta{sub 1-x}V{sub x}){sub 5}Si{sub 3} (Cr{sub 5}B{sub 3} type, 0{<=}x{<=}0.128) and (Ta{sub x}V{sub 1-x}){sub 5}Si{sub 3} (W{sub 5}Si{sub 3} type, 0{<=}x{<=}0.048). - Graphical abstract: Phase relations have been evaluated for the Ta-V-Si system at 1500 and 1200 Degree-Sign C. Highlights: Black-Right-Pointing-Pointer Phase relations have been evaluated for the Ta-V-Si system at 1500 and 1200 Degree-Sign C. Black-Right-Pointing-Pointer Three ternary phases were found at 1500 Degree-Sign C. Black-Right-Pointing-Pointer At 1500 Degree-Sign C, {tau}{sub 1}-phase has large homogeneity region (0.064{<=}x{<=}0.624).

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Synthesis and characterization of anatase TiO{sub 2} nanotubes with controllable crystal size by a simple MWCNT template method

Highly crystalline phase-pure anatase TiO{sub 2} nanotubes were produced by performing a simple calcinations process in air of the TiO{sub 2} coated MWCNTs composite material prepared by an in situ sol-gel method. A homogeneous thin coating layer of TiO{sub 2} on the surface of MWCNTs is firstly obtained. Calcination in ambient air at appropriate temperatures is performed to transform phase of TiO{sub 2} into anatase and remove MWCNTs simultaneously, resulting in pure anatase TiO{sub 2} nanotubes. Both end tips of the nanotubes are observed to be closed, probably due to covering up MWCNTs with TiO{sub 2} particles. The crystallization of anatase phase was formed upon 350 Degree-Sign C, and MWCNTs are completely oxidized between 500 and 650 Degree-Sign C, leaving anatase TiO{sub 2} nanotubes with an average crystal size increasing from about 8 to 24 nm as the temperature rises. Moreover, the tubular structure was found to collapse after calcinations at 700 Degree-Sign C. - Graphical abstract: TGA analysis and TEM images of the samples after calcinations in air at different temperatures: (a) before calcinations, (b) 350 Degree-Sign C, (c) 500 Degree-Sign C, and (d) 650 Degree-Sign C. Highlights: Black-Right-Pointing-Pointer Highly crystalline and stable phase-pure anatase TiO{sub 2} nanotubes were produced by a simply MWCNT template method. Black-Right-Pointing-Pointer A homogeneous thin coating layer of TiO{sub 2} on the surface of MWCNTs could be obtained. Black-Right-Pointing-Pointer Small crystal size of anatase is formed at lower temperatures and higher temperatures cause significant increase of crystal size from 8 to 24 nm. Black-Right-Pointing-Pointer Convex closed tip structure of TiO{sub 2} nanotubes is formed owing to the good coating of TiO{sub 2}.

36 MATERIALS SCIENCE↗