Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Gap”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,621 records · Page 90

Improved performance of a near-field thermophotovoltaic device by a back gapped reflector

Various spectral control techniques can be applied to improve the performance of a thermophotovoltaic (TPV) device. For example, a back surface reflector (BSR) is a common structure to improve the performance of TPV devices. A conventional metal BSR structure enhances the photogeneration rate by increasing the absorption probability of photons via back surface reflections, affording a second chance for absorption. However, the effects of surface passivation and external luminescence introduced by BSR structures have been previously ignored, which potentially decreases the performance of TPV devices. Recently, a back gapped reflector (BGR) structure was proposed to greatly improve the performance of far-field TPV devices by reducing imperfect reflections at the semiconductor-metal interface. In the present work, the performance improvement on a thin-film, near-field InAs TPV device with a BGR is investigated, comparing its performance to that with a conventional metal BSR. Surface passivation conditions are also investigated to further improve the performance of TPV devices with back reflectors. Further, the output power and efficiency are calculated using an iterative model combining fluctuational electrodynamics and the full drift diffusion model. For the well-passivated condition, when the BSR is replaced by the BGR, the calculated conversion efficiency of the near-field TPV was improved from 16.4% to 21% and the output power was increased by 10%. Finally, the absorption of the back reflectors and external luminescence loss are analyzed to explain the performance improvement.

external luminescence↗

Probing Surface Chemistry at an Atomic Level: Decomposition of 1-Propanethiol on GaP(001) (2 × 4) Investigated by STM, XPS, and DFT

The adsorption and decomposition mechanisms for 1-propanethiol on a Ga-rich GaP(001) (2 × 4) surface are investigated at an atomic level using scanning tunneling microscopy (STM), X-ray photoelectron spectroscopy, and density functional theory (DFT) calculations. Using a combination of experimental and theoretical tools, we probe the detailed structures and energetics of a series of reaction intermediates in the thermal decomposition pathway from 130 to 773 K. At 130 K, the propanethiolate adsorbates are observed at the edge gallium sites, with the thiolate–Ga bonding configuration maintained up to 473 K. Further decomposition produces two new surface features, Ga–S–Ga and P-propyl species at 573 K. Finally, S-induced (1 × 1) and (2 × 1) reconstructions are observed at 673–773 K, which are reportedly associated with arrays of surface Ga–S–Ga bonds and subsurface diffusion of S. To understand the observed site-selectivity on the hydrogen dissociation of the thiol molecule at 130 K, the two most likely dissociation pathways (Ga–P vs Ga–Ga dimer sites) are investigated using DFT Gibbs energy calculations. While the theory predicts the kinetic advantage for the dissociation reaction occurring on the Ga–P dimer (Lewis acid–base combination), we only observed dissociation products on the Ga–Ga dimer (Lewis acid). Here, the DFT calculations clarify that the reversible thiolate diffusion along the Ga dimer row prevents recombinative desorption, which is probable on the Ga–P dimer. Together with experimental and theoretical results, we suggest a thermal decomposition mechanism for the thiol molecule with atomic-level structural details.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Lithography-Defined Semiconductor Moirés with Anomalous In-Gap Quantum Hall States

Quantum materials and phenomena have attracted great interest for their potential applications in next-generation microelectronics and quantum-information technologies. In one especially interesting class of quantum materials, moiré superlattices (MSLs) formed by twisted bilayers of 2D materials, a wide range of novel phenomena are observed. However, there exist daunting challenges such as reproducibility and scalability of utilizing 2D MSLs for microelectronics and quantum technologies due to their exfoliate-tear-stack method. Here, we propose lithography-defined semiconductor MSLs, in which three fundamental parameters electron−electron interaction, spin−orbit coupling, and band topology are designable. We experimentally investigate quantum-transport properties in a moiré specimen made in an InAs quantum well. Strong anomalous in-gap states are observed within the same integer quantum Hall state. Our work opens up new horizons for studying 2D quantum-materials phenomena in semiconductors featuring superior industry-level quality and state-of-the-art technologies, and they may potentially enable new quantum-information and microelectronics technologies.

36 MATERIALS SCIENCE↗

A Theoretical Study of Methanol Oxidation on RuO 2 (110): Bridging the Pressure Gap

Partial oxidation catalysis is often fraught with selectivity problems, largely because there is a tendency of oxidation products to be more reactive than the starting material. One industrial process that has successfully overcome this problem is partial oxidation of methanol to formaldehyde. This process has become a global success, with an annual production of 30 million tons. Although ruthenium catalysts have not shown activity as high as the current molybdena or silver-based industrial standards, the study of ruthenium systems has the potential to elucidate which catalyst properties facilitate the desired partial oxidation reaction as opposed to deep combustion due to a pressure-dependent selectivity “switch” that has been observed in ruthenium-based catalysts. In this work, we find that we are able to successfully rationalize this “pressure gap” using near-ab initio steady-state microkinetic modeling on RuO 2 (110). We obtain molecular desorption prefactors from experiment and determine all other energetics using density functional theory. We show that, under ambient pressure conditions, formaldehyde production is favored on RuO 2 (110), whereas under ultrahigh vacuum pressure conditions, full combustion to CO 2 takes place. We glean from our model several insights regarding how coverage effects, oxygen activity, and rate-determining steps influence selectivity and activity. As a result, we believe the understanding gained in this work might advise and inspire the greater partial oxidation community and be applied to other catalytic processes which have not yet found industrial success.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Optical band gap and magnetic properties of unstrained EuTiO{sub 3} films

Phase-pure, stoichiometric, unstrained, epitaxial (001)-oriented EuTiO{sub 3} thin films have been grown on (001) SrTiO{sub 3} substrates by reactive molecular-beam epitaxy. Magnetization measurements show antiferromagnetic behavior with T{sub N}=5.5 K, similar to bulk EuTiO{sub 3}. Spectroscopic ellipsometry measurements reveal that EuTiO{sub 3} films have a direct optical band gap of 0.93{+-}0.07 eV.

36 MATERIALS SCIENCE↗

Spatial dependence of the pairing gap in superfluid nuclei

The spatial structure of pairing correlations in {sup 120}Sn is investigated making use of both the bare nucleon-nucleon potential and the interaction induced by the exchange of collective vibrations, taking into account self-energy effects. The resulting pairing gap is strongly peaked on the nuclear surface.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Suppression of Landau damping via electron band gap

The pondermotive potential in the x-ray Raman compression can generate an electron band gap, which suppresses the Landau damping. The regime is identified where a Langmuir wave can be driven without damping in the stimulated Raman compression. It is shown that the partial wave breaking and the frequency detuning due to the trapped particles would be greatly reduced.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Band gap states of copper phthalocyanine thin films induced by nitrogen exposure

The impact of 1 atm N{sub 2} gas exposure on the electronic states of copper phthalocyanine thin films was investigated using ultrahigh-sensitivity ultraviolet photoelectron spectroscopy. The highest occupied molecular orbital band of the film showed a drastic reversible change in the bandwidth and band shape as well as in the energy position upon repeated cycles of N{sub 2} exposure and subsequent annealing. Furthermore, two types of gap-state densities with Gaussian and exponential distributions appeared after the exposure and disappeared due to the annealing. These changes are ascribed to a weak disorder in the molecular packing structure induced by N{sub 2} diffusion into the film.

36 MATERIALS SCIENCE↗

Fabrication and subband gap optical properties of silicon supersaturated with chalcogens by ion implantation and pulsed laser melting

Topographically flat, single crystal silicon supersaturated with the chalcogens S, Se, and Te was prepared by ion implantation followed by pulsed laser melting and rapid solidification. The influences of the number of laser shots on the atomic and carrier concentration-depth profiles were measured with secondary ion mass spectrometry and spreading resistance profiling, respectively. We found good agreement between the atomic concentration-depth profiles obtained from experiments and a one-dimensional model for plane-front melting, solidification, liquid-phase diffusion, with kinetic solute trapping, and surface evaporation. Broadband subband gap absorption is exhibited by all dopants over a wavelength range from 1 to 2.5 microns. The absorption did not change appreciably with increasing number of laser shots, despite a measurable loss of chalcogen and of electronic carriers after each shot.

36 MATERIALS SCIENCE↗

Modeling the effect of native and laser-induced states on the dielectric breakdown of wide band gap optical materials by multiple subpicosecond laser pulses

A model for the multiple-pulse laser-induced breakdown behavior of dielectrics is presented. It is based on a critical conduction band (CB) electron density leading to dielectric breakdown. The evolution of the CB electron density during the pulse train is calculated using rate equations involving transitions between band and mid-gap states (native and laser-induced). Using realistic estimations for the trap density and ionization cross-section, the model is able to reproduce the experimentally observed drop in the multiple-pulse damage threshold relative to the single-pulse value, as long as the CB electron density is controlled primarily by avalanche ionization seeded by multiphoton ionization of the traps and the valence band. The model shows that at long pulse duration, the breakdown threshold becomes more sensitive to presence of traps close (within one photon energy) to the CB. The effect of native and laser-induced defects can be distinguished by their saturation behavior. Finally, measurements of the multiple-pulse damage threshold of hafnium oxide films are used to illustrate the application of the model.

36 MATERIALS SCIENCE↗

Ce-doped EuO: Magnetic properties and the indirect band gap

We have prepared and investigated thin films of EuO doped with the rare-earth element cerium. X-ray diffraction, scanning electron microscopy, and energy dispersive x-ray spectroscopy were used to determine the quality of these films prepared by pulsed laser deposition. Ce doping leads to an enhanced Curie temperature near 150 K, close to that seen for oxygen-deficient EuO{sub 1-x}. However, the magnetization of Ce-doped EuO exhibits differences from that observed for Gd-doped and oxygen-deficient samples. The high-resolution angular-resolved photoemission from Ce-doped EuO reveals filling of conduction-band states near the X point. This indicates that the band gap in EuO is indirect, and that at 2% doping Ce-doped EuO{sub 1-x} is at least semimetallic.

36 MATERIALS SCIENCE↗

Is it effective to harvest visible light by decreasing the band gap of photocatalytic materials?

In situ variations in the electron work function and photo-current of TiO{sub 2} nanotubes demonstrate that long-wavelength illumination only has a minor effect on the excitation of electrons in the nanotubes after being exposed to short-wavelength light or when the short-wavelength light coexisted, indicating that the solar spectrum may not be utilized as efficiently as expected by extending the absorption spectrum of the photocatalytic material to visible light range with decreased band gaps.

36 MATERIALS SCIENCE↗

Band gap engineering in BiNbO{sub 4} for visible-light photocatalysis

We have investigated the electronic structure of anionic mono- (S, N, and C) and co-doping (N-N, C-N, S-C, and S-N) on BiNbO{sub 4} for the visible-light photocatalysis. The maximum band gap reduction of pure BiNbO{sub 4} is possible with the (C-S) co-doping and minimum with N mono-doping. The calculated binding energies show that the co-doped systems are more stable than their mono-doped counterparts. Our optical absorption curves indicate that the mono- (C) and co-anionic doped (N-N and C-S) BiNbO{sub 4} systems are promising materials for visible light photocatalysis.

36 MATERIALS SCIENCE↗

Experimental study of upper sd shell nuclei and evolution of sd-fp shell gap

The intruder orbitals from the fp shell play important role in the structure of nuclei around the line of stability in the upper sd shell. Experimentally we have studied {sup 35}Cl, {sup 30}P, {sup 36}Cl, {sup 37}Ar and {sup 34}Cl in this mass region using the INGA setup. Large basis cross-shell shell model calculations have indicated the need for change of the sd-fp energy gap for reliable reproduction of negative parity and high spin positive parity states. Indication of population of states of large deformation has been found in our data. Theoretical interpretation of these states has been discussed.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Band gap tuning and optical absorption in type-II InAs/GaSb mid infrared short period superlattices: 14 bands K Dot-Operator p study

The MBE growth of short-period InAs/GaSb type-II superlattice structures, varied around 20.5 A InAs/24 A GaSb were [J. Applied physics, 96, 2580 (2004)] carried out by Haugan et al. These SLs were designed to produce devices with an optimum mid-infrared photoresponse and a sharpest photoresponse cutoff. We have used a realistic and reliable 14-band k.p formalism description of the superlattice electronic band structure to calculate the absorption coefficient in such short-period InAs/GaSb type-II superlattices. The parameters for this formalism are known from fitting to independent experiments for the bulk materials. The band-gap energies are obtained without any fitting parameters, and are in good agreement with experimental data.

36 MATERIALS SCIENCE↗

Pseudomorphic GeSn/Ge(001) quantum wells: Examining indirect band gap bowing

A study of the bandgap character of compressively strained GeSn{sub 0.060-0.091}/Ge(001) quantum wells grown by molecular beam epitaxy is reported. The built-in strain in GeSn wells leads to an increased separation between L and {Gamma} conduction band minima. The prevalent indirect interband transitions in GeSn were probed by photoluminescence spectroscopy. As a result we could simulate the L-valley bowing parameter in GeSn alloys, b{sub L} = 0.80 {+-} 0.06 eV at 10 K. From this we conclude that even compressively strained GeSn/Ge(001) alloys could become direct band gap semiconductors at the Sn-fraction higher than 17.0 at. %.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Electronic properties of graphene nano-flakes: Energy gap, permanent dipole, termination effect, and Raman spectroscopy

The electronic properties of graphene nano-flakes (GNFs) with different edge passivation are investigated by using density functional theory. Passivation with F and H atoms is considered: C{sub N{sub c}} X{sub N{sub x}} (X = F or H). We studied GNFs with 10 < N{sub c} < 56 and limit ourselves to the lowest energy configurations. We found that: (i) the energy difference Δ between the highest occupied molecular orbital and the lowest unoccupied molecular orbital decreases with N{sub c}, (ii) topological defects (pentagon and heptagon) break the symmetry of the GNFs and enhance the electric polarization, (iii) the mutual interaction of bilayer GNFs can be understood by dipole-dipole interaction which were found sensitive to the relative orientation of the GNFs, (iv) the permanent dipoles depend on the edge terminated atom, while the energy gap is independent of it, and (v) the presence of heptagon and pentagon defects in the GNFs results in the largest difference between the energy of the spin-up and spin-down electrons which is larger for the H-passivated GNFs as compared to F-passivated GNFs. Our study shows clearly the effect of geometry, size, termination, and bilayer on the electronic properties of small GNFs. This study reveals important features of graphene nano-flakes which can be detected using Raman spectroscopy.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Band gap tunning in BN-doped graphene systems with high carrier mobility

Using density functional theory, we present a comparative study of the electronic properties of BN-doped graphene monolayer, bilayer, trilayer, and multilayer systems. In addition, we address a superlattice of pristine and BN-doped graphene. Five doping levels between 12.5% and 75% are considered, for which we obtain band gaps from 0.02 eV to 2.43 eV. We demonstrate a low effective mass of the charge carriers.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗