Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Fiber”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,621 records · Page 90
All sourcesNASA NTRSDOE OSTI
DOE OSTI2013

Immobilization of WO{sub 3} or MoO{sub 3} on macroscopic silica fiber via CNFs template

Graphical abstract: Uniform immobilization of tungsten trioxide (WO{sub 3}) or molybdenum trioxide (MoO{sub 3}) on silica fiber was successfully achieved by using carbon nanofibers (CNFs) as template. FE-SEM coupled with XRD analysis confirmed the template effect and the existence of WO{sub 3} or MoO{sub 3} immobilized on silica fiber. It is expected that such materials with direct macroscopic shapes would hold promise as highly functionalized materials for potential practical applications, especially in photocatalysis. - Highlights: • WO{sub 3} or MoO{sub 3} with macroscopic shapes were successfully obtained. • WO{sub 3} and MoO{sub 3} immobilization depended on CNFs templates. • FE-SEM and XRD confirmed the structure and phase composition. - Abstract: Uniform immobilization of tungsten trioxide (WO{sub 3}) or molybdenum trioxide (MoO{sub 3}) on silica fiber was successfully achieved by using carbon nanofibers (CNFs) as template. Field emission scanning electron microscopy (FE-SEM), coupled with X-ray diffraction (XRD) analysis confirmed the template effect and the existence of WO{sub 3} or MoO{sub 3} immobilized on silica fiber. It is expected that such materials with direct macroscopic shapes would hold promise as highly functionalized materials for potential practical applications, especially in photocatalysis.

36 MATERIALS SCIENCE↗
DOE OSTI2014

Submicron diameter single crystal sapphire optical fiber

In this work, a submicron-diameter single crystal sapphire optical fiber was demonstrated via wet acid etching at elevated temperatures. Etch rates on the order 2.3 µm/hr were achievable with a 3:1 molar ratio sulfuric-phosphoric acid solution maintained at a temperature of 343°C. A sapphire fiber with an approximate diameter of 800 nm was successfully fabricated from a commercially available fiber with an original diameter of 50 µm. The simple and controllable etching technique provides a feasible approach to the fabrication of unique waveguide structures via traditional silica masking techniques. The ability to tailor the geometry of sapphire optical fibers is the first step in achieving optical and sensing performance on par with its fused silica counterpart.

36 MATERIALS SCIENCE↗
DOE OSTI2018

Innovative Method for Enhancing Carbon Fibers Dispersion in Wet-Laid Nonwovens

The production of wet laid (WL) reinforcing fiber mats is adopted from the paper making industry to produce carbon fiber (CF) mats. The resulting mats are prone to defects induced by the mixing regime. Here, this study explores a new mixer design that achieved fully dispersed mats with 20 minutes processing time using 25.4 mm long CF. The proposed mixing method is compared against the traditional method and the density distribution of fibers is characterized using Back Light Scattering (BLS) technique. The mats showed high consistency with less than 8% standard deviation from the data collected from different regions within the mats. The innovative mixer resulted in mats with fiber distribution 70% closer to the theoretical distribution than that of the traditional mixer. This innovative method of preparing nonwoven CF mats will create new opportunities for CF nonwoven composite applications.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Use of Ionic Liquids for Hemp Fiber Degumming

Degumming or retting to remove pectin, lignin, and hemicellulose is a critical step in the production of high-quality hemp fibers. Current technologies, including traditional water or dew retting, as well as chemical, enzymatic, and physical degumming processes, have inherent environmental risks and produce fibers of varying qualities. Herein we explore the use of an ionic liquid (IL) capable of dissolving pectin, lignin, and hemicellulose, but not cellulose, in combination with different oxidating agents to degum hemp. In this study, we observed that treating raw hemp fibers with the IL choline acetate ([Cho][OAc]), alone or in combination with aqueous H 2 O 2 , led to a reduction in the gummy materials and lignin content of the resulting samples of up to 63 and 78%, respectively. More importantly, the high crystallinity and low reduction in tensile strength of the resulting fibers make these novel and relatively simple IL-based processes promising alternatives toward the sustainable preparation of hemp-based materials suitable for use in the textile industry.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2019

Direct CO 2 Capture from Air using Poly(ethylenimine)-Loaded Polymer/Silica Fiber Sorbents

Direct CO2 capture from atmospheric air is gaining increased attention as one of the most scalable negative carbon approaches available to tackle climate change if coupled with the sequestration of CO2 geologically. Furthermore, it can also provide CO2 for further utilization from a globally uniform source, which is especially advantageous for economies without natural sources of carbon-based feedstocks. Solid-supported amine-based materials are effective for direct air capture (DAC) due to their high CO2 uptakes and acceptable sorption kinetics at ambient temperature. In this work, we describe the application of polymer/silica fiber sorbents functionalized with a primary amine-rich polymer, poly(ethylenimine) (PEI), for DAC. Monolithic fiber sorbents composed of cellulose acetate and SiO2 are synthesized via the dry-jet, wet quench spinning technique. These fibers are then functionalized with PEI (Mw 800 Da) in a simple and scalable postspinning infusion step and tested for CO2 capture under pseudoequilibrium conditions as well as under breakthrough conditions. An investigation to study the effect of feed flow rate, adsorption temperature, and presence of moisture in the feed on the CO2 breakthrough performance of a densely packed fiber sorbent module is conducted to highlight the potential application of this class of structured contactors in direct air capture. The pressure drop of these contactors at high gas velocities is also evaluated. Finally, a vacuum-assisted desorption step is demonstrated for production of high-purity CO2 from both dry and humid ambient air mixtures.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Aqueous Carbon Capture Using Guanidinium-Functionalized Hollow Fiber Sorbent Contactors

As part of the growing suite of technologies aimed at combatting rising temperatures, negative emissions technologies have become a powerful tool in the global effort to minimize the consequences of human-induced climate change. Among these, carbon removal from aqueous sources, which contain much higher carbon concentrations than the atmosphere, remains largely unexplored. Indeed, developing robust and efficient carbon capture materials for usage in complex aqueous environments remains a significant challenge. Here, we explore the potential of functionalizing polyvinylidene fluoride (PVDF) hollow fiber contactors grafted with a guanidinium-derived polymer sorbent for carbon removal from aqueous sources, including saline waters. Computational screening against amine-based analogs is utilized to identify guanidinium as a promising motif for bicarbonate (HCO 3 – ) ions binding. To leverage this finding, synthesis of a guanidinium polymer and subsequent covalent grafting onto PVDF hollow fibers is employed to structured polymer–sorbent–grafted hollow fiber contactors. Our prototype achieves an initial HCO 3 – removal of 34% with an increase to 98% after four cycles. The functionalized fibers demonstrate aqueous stability over 13 adsorption/desorption cycles in model NaHCO 3 solutions where regeneration is facilitated by a mild pH swing. Importantly, the system maintains selective performance in the presence of competitive chloride ions over multiple cycles; carbon removal remained above 10% even at high (10:1) NaCl/NaHCO 3 ratios. These findings demonstrate the feasibility of sorbent-based aqueous carbon removal and highlight its potential as a promising approach for negative emissions.

carbon capture↗
DOE OSTI2022

Comparisons Between Array Derived Dynamic Strain Rate (ADDS) and Fiber‐Optic Distributed Acoustic Sensing (DAS) Strain Rate

Abstract Distributed acoustic sensing (DAS) strain rate and particle velocity can be compared through approximate scaling with medium velocity. We instead performed a direct comparison between array derived dynamic strain (ADDS) rate and DAS strain rate for six frequency bands. The PoroTomo project at Brady's Hot Springs, Nevada, deployed a 240‐geophone 3C array co‐located with fiber‐optic DAS system and 8.7 km of buried cable. We selected subsets of the geophone array to create four smaller arrays and computed ADDS. The horizontal components of the ADDS were rotated into the direction of the fiber‐optic cable and then compared with the observed DAS strain rates. From three example regional earthquakes of local magnitudes 2.9, 4.1, and 4.3, the ADDS are found to be coherent with DAS for frequencies ≤1 Hz. For frequencies >1‐Hz, this correlation decays quickly. Small differences between linear and areal dynamic strains at 1‐Hz suggest poor signal‐to‐noise or localized strain that is perturbed by shallow heterogeneities compare to the average strain propagating across the geophone array. The implication is that around 1‐Hz, straight fiber DAS is measuring axial strain along the fiber and can provide good approximations to translational particle motions. However, above 1‐Hz, DAS becomes more sensitive to shallow velocity gradients that can be beneficial for geophysical imaging yet becomes a limitation for traditional seismic analysis methods depending on absolute amplitude and phase from translational particle motions.

58 GEOSCIENCES↗
DOE OSTI2025

Additive manufacturing of carbon fiber-reinforced thermoset composites via in-situ thermal curing

Fiber-reinforced polymer composites are lightweight structural materials widely used in the transportation and energy industries. Current approaches for the manufacture of composites require expensive tooling and long, energy-intensive processing, resulting in a high cost of manufacturing, limited design complexity, and low fabrication rates. Here, we report rapid, scalable, and energy-efficient additive manufacturing of fiber-reinforced thermoset composites, while eliminating the need for tooling or molds. Use of a thermoresponsive thermoset resin as the matrix of composites and localized, remote heating of carbon fiber reinforcements via photothermal conversion enables rapid, in-situ curing of composites without further post-processing. Rapid curing and phase transformation of the matrix thermoset, from a liquid or viscous resin to a rigid polymer, immediately upon deposition by a robotic platform, allows for the high-fidelity, freeform manufacturing of discontinuous and continuous fiber-reinforced composites without using sacrificial support materials. This method is applicable to a variety of industries and will enable rapid and scalable manufacture of composite parts and tooling as well as on-demand repair of composite structures.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Achieving precise multiparameter measurements with distributed optical fiber sensor using wavelength diversity and deep neural networks

The development of advanced distributed optical fiber sensing systems that are capable of performing accurate and spatially resolved multiparameter measurements is of great interest to a wide range of scientific and industrial applications. Here, in this paper, we propose and experimentally demonstrate a wavelength diversity based advanced distributed optical fiber sensor system to accomplish multiparameter sensing while greatly enhancing measurement accuracy. A suite of deep neural network (DNN) algorithms are developed and verified for data denoising, rapid Brillouin frequency shift estimation, and vibration data event classification. As a proof-of-concept, we demonstrate the effectiveness of the proposed advanced wavelength diversity distributed fiber sensor system assisted by DNN for simultaneous, independent measurements of static strain, temperature, and acoustic vibrations over a 25 km long sensing fiber at 3 m spatial resolution. These results suggest the potential for an intelligent multiparameter monitoring system with enhanced performance in advanced structural health monitoring applications.

47 OTHER INSTRUMENTATION↗
DOE OSTI2021

Conversion of cellulose to high-yield glucose in water over sulfonated mesoporous carbon fibers with optimized acidity

The hydrolysis of cellulose to high-yield glucose in water remains challenging owing to the limited acidity and substrate contact of sulfonated carbons. In this study, we report a unique sulfonated mesoporous carbon fiber with optimized acidity prepared by the pyrolysis of FeCl 3 -impregnated wipe fibers followed by acid treatment. The Bronsted acidity (especially for SO 3 H) was produced by sulfonation of the magnetic carbon fiber intermediate, while Lewis acidity originated from small Fe 3 O 4 nanoparticles and the remaining defects. The balanced Bronsted and Lewis acidity combined with hydrophilic functionalities was simultaneously tailored by varying the Fe/wipe fiber (WF) feed ratio and pyrolysis temperature to change the porous structure of the final catalysts. The elaborately fabricated MCF-SO 3 H-20-500 (20% Fe/WF feed ratio and pyrolysis at 500 degrees C) delivered 66.0% glucose yield as cellulose was completely converted. This is the highest glucose yield achieved by the hydrolysis of untreated cellulose in water over a sulfonated carbon catalyst. The optimized Bronsted and Lewis acidity was mainly responsible for the controlled conversion of cellulose to glucose, while the rich hydrophilic functionalities and superior mesoporous structure of the catalyst facilitated contact to cellulose and mass transfer. This investigation will open new avenues to design high-performance carbon sulfoacid catalysts toward cellulose hydrolysis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2013

Influence of fluorine on the fiber resistance studied through the nonbridging oxygen hole center related luminescence

The distribution of Non-Bridging Oxygen Hole Centers (NBOHCs) in fluorine doped optical fibers was investigated by confocal microluminescence spectroscopy, monitoring their characteristic 1.9 eV luminescence band. The results show that these defects are generated by the fiber drawing and their concentration further increases after {gamma} irradiation. The NBOHC concentration profile along the fiber provides evidence for an exponential decay with the fluorine content. This finding agrees with the role of fluorine in the fiber resistance and is discussed, from the microscopic point of view, by looking at the conversion mechanisms from strained bonds acting as precursors.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2013

A multi-point laser Doppler vibrometer with fiber-based configuration

Laser Doppler vibrometer (LDV) is a non-contact optical interferometric system to measure vibrations of structures and machines with a high precision. Normal LDV can only offer a single-point measurement. Scanning LDV is usually impractical to do measurement on transient events. In this paper, a fiber-based self-synchronized multi-point LDV is proposed. The multiple laser beams with different frequency shifts are generated from one laser source. The beams are projected onto a vibrating object, reflected and interfered with a common reference beam. The signal including vibration information of multiple spatial points is captured by one single-pixel photodetector. The optical system is mainly integrated by fiber components for flexibility in measurement. Two experiments are conducted to measure a steady-state simple harmonic vibration of a cantilever beam and a transient vibration of a beam clamped at both ends. In the first measurement, a numerical interpolation is applied to reconstruct the mode shape with increased number of data points. The vibration mode obtained is compared with that from FEM simulation. In transient vibration measurement, the first five resonant frequencies are obtained. The results show the new-reported fiber-based multipoint LDV can offer a vibration measurement on various spatial points simultaneously. With the flexibility of fiber configuration, it becomes more practical for dynamic structural evaluation in industrial areas.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2014

Photo-induced changes in a hybrid amorphous chalcogenide/silica photonic crystal fiber

Photostructural changes in a hybrid photonic crystal fiber with chalcogenide nanofilms inside the inner surface of the cladding holes are experimentally demonstrated. The deposition of the amorphous chalcogenide glass films inside the silica capillaries of the fiber was made by infiltrating the nanocolloidal solution-based As{sub 25}S{sub 75}, while the photoinduced changes were performed by side illuminating the fiber near the bandgap edge of the formed glass nanofilms. The photoinduced effect of the chalcogenide glass directly red-shifts the transmission bandgap position of the fiber as high as ∼20.6 nm at around 1600 nm wavelength, while the maximum bandgap intensity change at ∼1270 nm was −3 dB.

36 MATERIALS SCIENCE↗
DOE OSTI2014

Fabrication of micro-hollow fiber by electrospinning process in near-critical carbon dioxide

Electrospinning is a simple technique that has gained much attention because of its capability and feasibility in the fabrication of large quantities of fibers from polymer with diameters ranging in nano-microscale. These fibers provided high surface area to volume ratios, and it was of considerable interest for many applications, such as nanoparticle carriers in controlled release, scaffolds in tissue engineering, wound dressings, military wear with chemical and biological toxin-resistance, nanofibrous membranes or filters, and electronic sensors. Recently there has been a great deal of progress in the potential applications of hollow fibers in microfluids, photonics, and energy storage. In this work, electrospinning was conducted under high-pressure carbon dioxide (CO{sub 2}) to reduce the viscosity of polymer solution. The experiments were conducted at 313 K and ∼8.0 MPa. Polymer solution containing 5 wt% polymers which prepared in dichloromethane (DCM) with polyvinylpyrrolidone (PVP) to poly-L-lactic acid (PLLA) ratio 80:20 was used as a feed solution. The applied voltage was 15 kV and the distance of nozzle and collector was 8 cm. The morphology and structure of the fibers produced were observed using scanning electron microscopy (SEM). Under pressurized CO{sub 2}, PVP electrospun was produced without bead formation with diameter ranges of 608.50 - 7943.19 nm. These behaviors hold the potential to considerably improve devolatilization electrospinning processes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2014

One-pot hydrothermal synthesis of silver nanoplates on optical fiber tip for surface-enhanced Raman scattering

We report on surface-enhanced Raman scattering (SERS) fiber probe based on silver nanoplates which are fabricated on the tapered tip of the multimode fiber, by a simple, effective and low-cost hydrothermal method. The field-emission scanning electron microscopy and the transmission electron microscopy show that the obtained fiber probe is composed of nanoplates with the thickness of about 40 nm and an average length of 300 nm. The SERS activity of the tapered fiber probe with an optimal cone angle has demonstrated excellent results using the probing molecule of 4-aminothiophenol.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2014

Self-Q-switching behavior of erbium-doped tellurite microstructured fiber lasers

We reported self-Q-switching behavior of erbium-doped tellurite microstructured fiber (EDTMF) lasers and further demonstrated a self-Q-switched EDTMF laser with a high repetition rate of more than 1 MHz. A 14 cm EDTMF was used as the gain medium. Upon a pump power of ∼705 mW at 1480 nm, output pulses with a lasing wavelength of ∼1558 nm, a repetition rate of ∼1.14 MHz, and a pulse width of ∼282 ns were generated from the fiber by employing a linear cavity. The maximum output power was ∼316 mW and the slope efficiency was about 72.6% before the saturation of the laser power. Moreover, the influence of the fiber length on laser performances was investigated. The results showed that self-Q-switching behavior in our experiments was caused by the re-absorption originated from the ineffectively pumped part of the active fiber.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2014

Metallic attenuated total reflection infrared hollow fibers for robust optical transmission systems

A durable metallic attenuated total reflection (ATR) hollow fiber (bore size: 1.45 mm, wall thickness: 50 μm) was designed and fabricated based on a nickel capillary tube and hexagonal germanium dioxide (GeO{sub 2}). The anomalous dispersion of the hexagonal GeO{sub 2} layer grown inside a nickel tube achieves low-loss light transmission at two peak-power wavelengths for CO{sub 2} laser devices (10.2 and 10.6 μm). An 11–28 W, 10.2 or 10.6 μm CO{sub 2} laser power was steadily delivered via a fiber elastically bent from 0° to 90° (radius: 45 cm) for over 40 min (transmission loss: 0.22 to 4.2 dB/m). Theoretically fitting the measured temperatures showed that front-end clipping caused greater thermal loading than the distributed mode absorption. The maximum external temperature of a nickel ATR fiber is much lower than that of a silica glass ATR fiber owing to their different heat dissipation abilities. The HE{sub 11} mode purity of the output beam profiles decreased from 90.3% to 44.7% as the bending angle increased from 0° to 90°. Large core sizes and wall roughnesses (scattering loss 0.04 dB/m) contributed to mode mixing and excess losses that were above the value predicted by the classical Marcatili and Schmeltzer equation (0.024–0.037 dB/m).

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2014

Narrow-band single photon emission at room temperature based on a single nitrogen-vacancy center coupled to an all-fiber-cavity

We report the realization of a device based on a single Nitrogen-Vacancy (NV) center in diamond coupled to a fiber-cavity for use as single photon source (SPS). The device consists of two concave mirrors each directly fabricated on the facets of two optical fibers and a preselected nanodiamond containing a single NV center deposited onto one of these mirrors. Both, cavity in- and out-put are directly fiber-coupled, and the emission wavelength is easily tunable by variation of the separation of the two mirrors with a piezo-electric crystal. By coupling to the cavity, we achieve an increase of the spectral photon rate density by two orders of magnitude compared to free-space emission of the NV center. With this work, we establish a simple all-fiber based SPS with promising prospects for the integration into photonic quantum networks.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗