Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “FUNCTIONAL MODELS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,621 records · Page 90

Quantum tunneling and reflection of a molecule with a single bound state

In this article, we present the results of studies on the quantum mechanical tunneling and reflection of a diatomic, homonuclear molecule with a single bound state incident upon a potential barrier. In the first study, we investigate the tunneling of a molecule using a time-dependent formulation. The molecular wave function is modeled as a Gaussian wave packet, and its propagation is calculated numerically using Crank-Nicholson integration. It is found that a molecule may transition between the bound state and an unbound state numerous times during the process of reflection from or transmission past the barrier. It is also found that, in addition to reflecting and transmitting, the molecule may also temporarily straddle the potential barrier in an unbound state. In the second study, we consider the case of a molecule incident in the bound state upon a step potential with energy less than the step. We show that in the limit where the binding energy e{sub 0} approaches zero and the step potential V{sub 0} goes to infinity, the molecule cannot remain in a bound state if the center of mass gets closer to the step than an arbitrarily large distance x{sub 0} which increases as the magnitude of e{sub 0} decreases, as V{sub 0} increases, or both. We also show that, for e{sub 0{yields}}0{sup -} and V{sub 0{yields}{infinity}}, if the molecule is incident in the bound state, it is reflected in the bound state with probability equal to unity, when the center of mass reaches the reflection distance x{sub 0}. We verify that the unbound states exhibit the expected physical behavior. We discuss some surprising results. Connections between our results and investigations done in cold atoms, excitons, Cooper pairs, and Rydberg atoms are discussed.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

A flexible class of priors for orthonormal matrices with basis function-specific structure

Statistical modeling of high-dimensional matrix-valued data motivates the use of a low-rank representation that simultaneously summarizes key characteristics of the data and enables dimension reduction. Low-rank representations commonly factor the original data into the product of orthonormal basis functions and weights, where each basis function represents an independent feature of the data. However, the basis functions in these factorizations are typically computed using algorithmic methods that cannot quantify uncertainty or account for basis function correlation structure a priori. While there exist Bayesian methods that allow for a common correlation structure across basis functions, empirical examples motivate the need for basis function-specific dependence structure. We propose a prior distribution for orthonormal matrices that can explicitly model basis function-specific structure. The prior is used within a general probabilistic model for singular value decomposition to conduct posterior inference on the basis functions while accounting for measurement error and fixed effects. We discuss how the prior specification can be used for various scenarios and demonstrate favorable model properties through synthetic data examples. Finally, we apply our method to two-meter air temperature data from the Pacific Northwest, enhancing our understanding of the Earth system’s internal variability.

97 MATHEMATICS AND COMPUTING↗

Modeling transport kinetics in clinoptilolite-phosphate rock systems

Nutrient release in clinoptilolite-phosphate rock (Cp-PR) systems occurs through dissolution and cation-exchange reactions. Investigating the kinetics of these reactions expands our understanding of nutrient release processes. Research was conducted to model transport kinetics of nutrient release in Cp-PR systems. The objectives were to identify empirical models that best describe NH4, K, and P release and define diffusion-controlling processes. Materials included a Texas clinoptilolite (Cp) and North Carolina phosphate rock (PR). A continuous-flow thin-disk technique was used. Models evaluated included zero order, first order, second order, parabolic diffusion, simplified Elovich, Elovich, and power function. The power-function, Elovich, and parabolic-diffusion models adequately described NH4, K, and P release. The power-function model was preferred because of its simplicity. Models indicated nutrient release was diffusion controlled. Primary transport processes controlling nutrient release for the time span observed were probably the result of a combination of several interacting transport mechanisms.

NASA Center JSC↗

FECM/NETL Unconventional Shale Well Economic Model (UShWEM)

FECM/NETL Unconventional Shale Well Economic Model (UShWEM) is an Excel-based model that evaluates the economics of an unconventional shale well on a per-well and per-pad basis. The model calculates the net cash flow, internal rate of return (IRR), net present value (NPV), earnings before interest, taxes, depreciation, and amortization (EBITDA), payout month and year, and breakeven price (for either oil- or gas-wells). The model can be used to estimate the economics of a well or pad over its lifetime (development through site reclamation) based on (1) the capital and operating costs associated with well/pad development and operations, (2) the revenue associated with oil, gas, and condensate production streams, and (3) accounting for relevant tax policies and asset depreciation applicable for oil and gas operations. The main input for the model is the completion design and production data. Key financial considerations in the model include oil, gas, and condensate market prices, tax-related settings, royalty rates, the discount rate, minimum economic hurdle (IRR) [if performing break-even analysis], and project contingency. The financial consideration can be adjusted to reflect the level of granularity the user requires as input when calculating the economics for a well or pad development. In addition, the model affords users the option to provide their user inputs for all cost categories considered. As a result, the model can be used to generate a multitude of scenario cases for sensitivity analysis of the various financial considerations, as well as production and cost profiles. To make this seamless, the model has the capability for key economic outputs to be exported in large batches through macros-enabled functions on its “Model Output Summary” and “Multi-Well Cost Analysis. The spreadsheet model includes macros and user-defined functions, so the user must enable Excel’s macro capability for the model to function correctly.

Sheriff, Alana↗

Protostar mass functions in young clusters

In an improved model of protostar mass functions (PMFs), protostars gain mass from isothermal cores in turbulent clumps. Their mass accretion rate is similar to Shu accretion at low mass and to reduced Bondi accretion at high mass. Accretion durations follow a simple expression in which higher-mass protostars accrete for longer times. These times are set by ejections, stellar feedback, and gravitational competition, which terminate accretion and reduce its efficiency. The mass scale is the mass of a critically stable isothermal core. In steady state, the PMF approaches a power law at high mass because of competition between clump accretion and accretion stopping. The power law exponent is the ratio of the timescales of accretion and accretion stopping. The protostar luminosity function (PLF) peaks near 1 L {sub ☉} because of inefficient accretion of core gas. Models fit observed PLFs in four large embedded clusters. These indicate that their underlying PMFs may be top-heavy compared with the initial mass function, depending on the protostar radius model.

79 ASTRONOMY AND ASTROPHYSICS↗

Spin Structure Functions in a Covariant Spectator Quark Model

We apply the covariant spectator quark–diquark model, already probed in the description of the nucleon elastic form factors, to the calculation of the deep inelastic scattering (DIS) spin-independent and spin-dependent structure functions of the nucleon. The nucleon wave function is given by a combination of quark–diquark orbital states, corresponding to S, D and P-waves. A simple form for the quark distribution function associated to the P and D waves is tested.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

FOKKER-PLANCK MODELS FOR M15 WITHOUT A CENTRAL BLACK HOLE: THE ROLE OF THE MASS FUNCTION

We have developed a set of dynamically evolving Fokker-Planck models for the collapsed-core globular star cluster M15, which directly address the issue of whether a central black hole is required to fit Hubble Space Telescope (HST) observations of the stellar spatial distribution and kinematics. As in our previous work reported by Dull et al., we find that a central black hole is not needed. Using local mass-function data from HST studies, we have also inferred the global initial stellar mass function. As a consequence of extreme mass segregation, the local mass functions differ from the global mass function at every location. In addition to reproducing the observed mass functions, the models also provide good fits to the star-count and velocity-dispersion profiles, and to the millisecond pulsar accelerations. We address concerns about the large neutron star populations adopted in our previous Fokker-Planck models for M15. We find that good model fits can be obtained with as few as 1600 neutron stars; this corresponds to a retention fraction of 5% of the initial population for our best-fit initial mass function. The models contain a substantial population of massive white dwarfs, that range in mass up to 1.2M{sub sun} . The combined contribution by the massive white dwarfs and neutron stars provides the gravitational potential needed to reproduce HST measurements of the central velocity-dispersion profile.

79 ASTRONOMY AND ASTROPHYSICS↗

Wall functions for the kappa-epsilon turbulence model in generalized nonorthogonal curvilinear coordinates

A k-epsilon turbulence model suitable for compressible flow, including the new wall function formulation, has been incorporated into an existing compressible Reynolds-averaged Navier-Stokes code, F3D. The low Reynolds number k-epsilon model of Chien (1982) was added for comparison with the present method. A number of features were added to the F3D code including improved far-field boundary conditions and viscous terms in the streamwise direction. A series of computations of increasing complexity was run to test the effectiveness of the new formulation. Flow over a flat plate was computed by using both orthogonal and nonorthogonal grids, and the friction coefficients and velocity profiles compared with a semi-empirical equation. Flow over a body of revolution at zero angle of attack was then computed to test the method's ability to handle flow over a curved surface. Friction coefficients and velocity profiles were compared to test data. All models gave good results on a relatively fine grid, but only the wall function formulation was effective with coarser grids. Finally, in order to demonstrate the method's ability to handle complex flow fields, separated flow over a prolate spheroid at angle of attack was computed, and results were compared to test data. The results were also compared to a k-epsilon model by Kim and Patel (1991), in which one equation model patched in at the wall was employed. Both models gave reasonable solutions, but improvement is required for accurate prediction of friction coefficients in the separated regions.

Sondak, D. L.↗

Toward a coordinated understanding of hydro‐biogeochemical root functions in tropical forests for application in vegetation models

Summary Tropical forest root characteristics and resource acquisition strategies are underrepresented in vegetation and global models, hampering the prediction of forest–climate feedbacks for these carbon‐rich ecosystems. Lowland tropical forests often have globally unique combinations of high taxonomic and functional biodiversity, rainfall seasonality, and strongly weathered infertile soils, giving rise to distinct patterns in root traits and functions compared with higher latitude ecosystems. We provide a roadmap for integrating recent advances in our understanding of tropical forest belowground function into vegetation models, focusing on water and nutrient acquisition. We offer comparisons of recent advances in empirical and model understanding of root characteristics that represent important functional processes in tropical forests. We focus on: (1) fine‐root strategies for soil resource exploration, (2) coupling and trade‐offs in fine‐root water vs nutrient acquisition, and (3) aboveground–belowground linkages in plant resource acquisition and use. We suggest avenues for representing these extremely diverse plant communities in computationally manageable and ecologically meaningful groups in models for linked aboveground–belowground hydro‐nutrient functions. Tropical forests are undergoing warming, shifting rainfall regimes, and exacerbation of soil nutrient scarcity caused by elevated atmospheric CO 2 . The accurate model representation of tropical forest functions is crucial for understanding the interactions of this biome with the climate.

Plant Sciences↗

Tailoring the Weight of Surface and Intralayer Edge States to Control LUMO Energies

Abstract The energies of the frontier molecular orbitals determine the optoelectronic properties in organic films, which are crucial for their application, and strongly depend on the morphology and supramolecular structure. The impact of the latter two properties on the electronic energy levels relies primarily on nearest‐neighbor interactions, which are difficult to study due to their nanoscale nature and heterogeneity. Here, an automated method is presented for fabricating thin films with a tailored ratio of surface to bulk sites and a controlled extension of domain edges, both of which are used to control nearest‐neighbor interactions. This method uses a Langmuir–Schaefer‐type rolling transfer of Langmuir layers (rtLL) to minimize flow during the deposition of rigid Langmuir layers composed of π‐conjugated molecules. Using UV–vis absorption spectroscopy, atomic force microscopy, and transmission electron microscopy, it is shown that the rtLL method advances the deposition of multi‐Langmuir layers and enables the production of films with defined morphology. The variation in nearest‐neighbor interactions is thus achieved and the resulting systematically tuned lowest unoccupied molecular orbital (LUMO) energies (determined via square‐wave voltammetry) enable the establishment of a model that functionally relates the LUMO energies to a morphological descriptor, allowing for the prediction of the range of accessible LUMO energies.

36 MATERIALS SCIENCE↗

Vapor Phase Installation of CpCo(CO) 2 in MOF‐808

Metal-organic frameworks (MOFs), including MOF-808 present an opportunity for vapor phase installation of reactive centers that may serve as uniform sites for precision catalysis. The mechanism of cobalt installation in MOF-808 through atomic layer deposition (ALD) upon CpCo(CO )2 exposure is investigated through in situ FTIR spectroscopy complemented by density functional theory modeling. The role of subsequent H 2 O exposure in the hydrolysis of carbonyl and cyclopentadienyl ligands to complete the installation is also investigated. In situ FTIR study reveals that upon exposure of CpCo(CO) 2 to MOF-808 at 115 °C, a long-lived, stable intermediate is formed that presents carbonyl stretching vibrations similar to the undissociated precursor that are attributed to multiple chemisorbed carbonyl complexes. In MOF-808, cobalt species are initially absorbed near the BTC linker rather than directly on the nodes, revealing the importance of non-covalent interactions in the installation process. DFT suggests that H 2 O exposure promotes carbonyl elimination but leaves a cyclopentadienyl-capped cobalt that is more stable than the complete hydrolysis product. The simulations are consistent with cobalt installation in MOF-808 using CpCo(CO) 2 and H 2 O at 115 °C and further consistent with the lack of ALD thin film deposition of cobalt oxide thin films on planar supports.

36 MATERIALS SCIENCE↗

Polycrystal Plasticity Models Based on Green’s Functions: Mean-Field Self-Consistent and Full-Field Fast Fourier Transform Formulations

We review two crystal plasticity methodologies based on Green’s functions for the prediction of microstructure-property relations in polycrystalline aggregates. The first, known as the viscoplastic self-consistent (VPSC) formulation, is a mean-field theory. The second, known as the viscoplastic fast Fourier transform-based (VPFFT) formulation, is a full-field method. Finally, the assumptions and main equations of these Green’s function-based crystal plasticity formulations are presented using a unified notation, pointing out their similarities and differences and cross-validating their predictions.

36 MATERIALS SCIENCE↗

The Momentum Distribution of Liquid ⁴He

We report a high-resolution neutron Compton scattering study of liquid ⁴He under milli-Kelvin temperature control. To interpret the scattering data, we performed Quantum Monte Carlo calculations of the atomic momentum distribution and final state effects for the conditions of temperature and density considered in the experiment. There is excellent agreement between the observed scattering and ab initio calculations of its lineshape at all temperatures. We also used model fit functions to obtain from the scattering data empirical estimates of the average atomic kinetic energy and Bose condensate fraction. These quantities are also in excellent agreement with ab initio calculations. We conclude that contemporary Quantum Monte Carlo methods can furnish accurate predictions for the properties of Bose liquids, including the condensate fraction, close to the superfluid transition temperature.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

High Order Anchoring and Reinitialization of Level Set Function for Simulating Interface Motion

A second order interface anchoring method has been developed and used with fast sweeping algorithm for reinitialization of a level set function. The algebraic anchoring formulation ensures that the location of the actual interface is preserved, leading to better mass conservation property. It also provides high order accurate algebraic constraint for solving the Eikonal equation on a finite difference grid. Geometric properties of the interface such as surface normal and curvature are subsequently computed from the reinitialized distance function. Various analytical functions for modeling distortion in level set field are considered and accuracy of reinitialization is evaluated using first and second order anchoring schemes. It is also shown that accurate computation of interface curvature requires a high order anchor in addition to a high order fast sweeping method. Mass conservation property of reinitialization is also analyzed by considering test problems from literature including the classic Rider–Kothe single vortex problem. The formulation is suitable for efficient parallelization for both distributed memory and on-node shared memory parallel systems. In conclusion, scalability and performance of the reinitialization scheme on multiple architectures are demonstrated.

97 MATHEMATICS AND COMPUTING↗

The Pfaffian Sign Theorem for the Dimer Model on a Triangular Lattice

We prove the Pfaffian Sign Theorem for the dimer model on a triangular lattice embedded in the torus. More specifically, we prove that the Pfaffian of the Kasteleyn periodic-periodic matrix is negative, while the Pfaffians of the Kasteleyn periodic-antiperiodic, antiperiodic-periodic, and antiperiodic-antiperiodic matrices are all positive. The proof is based on the Kasteleyn identities and on small weight expansions. As an application, we obtain an asymptotic behavior of the dimer model partition function with an exponentially small error term.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Direct uranium enrichment assay in gaseous uranium hexafluoride with laser induced breakdown spectroscopy

A set of eleven U atomic emission lines, between 421.099 and 421.460 nm, were characterized for direct enrichment assay of gaseous UF 6 samples with laser induced breakdown spectroscopy (LIBS). Several iterative, multivariate nonlinear spectral-fitting algorithms were evaluated for their efficacies to extract the enrichment information from the measured LIBS spectra. Furthermore, wavelength-dependent weight factors, which take into consideration of the spectral-line position in the fitting model, the determined isotopic ratio, and the isotopic shift of the emission line, are essential for the spectral-fitting model to function adequately. The analytical accuracies and precision were typically within 0.5% in absolute [ 235 U/( 235 U + 238 U)] ratios.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗