Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Engine emission”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,621 records · Page 90

Development of Hydrogen-Fueled, Highly Energy-Efficient, Electro-Hydraulic Excavator

Regulations for CO2 emissions reduction are driving increasing demand for “zero emissions” off-road vehicles (ORVs). Hydrogen internal combustion engines (H2 ICEs) are closer to commercial viability, and less expensive than fuel cells. The major challenge is the slow torque response of H2 ICEs, that makes it difficult to sustain the harsh torque requirements typical of ORVs. The goal of this paper is to overcome this challenge by proposing an electro-hydraulic hybrid technology with hybrid powertrain and multi-pressure rail technology as fluid power system for an excavator, to enable the use of the H2 ICE, while improving efficiency. The study is based on simulation in MATLAB/Simulink environment, using duty cycle data from a 24-ton excavator. Simulation results show that in respect to the diesel-powered baseline, the proposed electro-hydraulic hybrid allows the use of a H2 ICE, eliminates CO2 emissions and ensures a 52% fuel consumption reduction.

08 HYDROGEN↗

Practical Application Limits of Fuel Cells and Batteries for Zero Emission Vessels

Batteries and hydrogen fuel cells provide zero emission power at the point of use. They are studied as an alternative powerplant for maritime vessels by considering 14 case studies of various ship sizes and routes varying from small passenger vessels to the largest cargo ships. The method used was to compare the mass and volume of the required zero emission solution to the available mass and volume on an existing vessel considering its current engine and fuel storage systems. The results show that it is practically feasible to consider these zero emission technologies for most vessels in the world's fleet. Hydrogen fuel cells proved to be the most capable while battery systems showed an advantage for high power, short duration missions. The results provide a guide to ship designers to determine the most suitable types of zero emission powerplants to fit a ship based on its size and energy requirements.

25 ENERGY STORAGE↗

Evaluating Class 6 Delivery Truck Fuel Economy and Emissions Using Vehicle System Simulations for Conventional and Hybrid Powertrains and Co-Optima Fuel Blends

The US Department of Energy’s Co-Optimization of Engine and Fuels Initiative (Co-Optima) investigated how unique properties of bio-blendstocks considered within Co-Optima help address emissions challenges with mixing controlled compression ignition (i.e., conventional diesel combustion) and enable advanced compression ignition modes suitable for implementation in a diesel engine. Additionally, the potential synergies of these Co-Optima technologies in hybrid vehicle applications in the medium- and heavy-duty sector was also investigated. In this work, vehicles system were simulated using the Autonomie software tool for quantifying the benefits of Co-Optima engine technologies for medium-duty trucks. A Class 6 delivery truck with a 6.7 L diesel engine was used for simulations over representative real-world and certification drive cycles with four different powertrains to investigate fuel economy, criteria emissions, and performance. Comparisons were made between ultralow-sulfur diesel and a blend of 25% hexyl hexanoate with diesel. Model validation data were informed by 2019 model year Cummins ISB 6.7 L diesel engine maps and transient validation data in a pre-production hybrid configuration and a direct dyno coupled configuration with diesel fuel and a blend of 25% hexyl hexanoate with diesel.

33 ADVANCED PROPULSION SYSTEMS↗

Techno-economic comparison of electrification for heavy-duty trucks in China by 2040

We show that electrification of heavy-duty trucks (HDTs) is critical of achieving sustainability and carbon neutrality in road freight. Based on the total cost of ownership and the life-cycle emissions, the study compared the traditional diesel internal combustion engine vehicle technologies with potential electrification options for HDTs in China, including battery electric vehicle, plug-in hybrid electric vehicle, hydrogen fuel cell vehicle, and battery electric catenary vehicle. Scenario and sensitivity analysis were explored the life-cycle effects of these electrification options in China from 2020 to 2040. It is found that green electricity and green hydrogen are the most important factors influencing the life-cycle emissions of CO 2 , NO X , and PM 2.5 for different HDTs’ electrification options. The plug-in hybrid electric vehicle of HDTs has shown good performance in terms of total cost and carbon emissions, mainly due to the reduced battery capacity and the current grid mix in China.

33 ADVANCED PROPULSION SYSTEMS↗

Non-Markovian dynamics of a superconducting qubit in a phononic bandgap

Reducing decoherence in quantum computers rapidly decreases the overhead needed to construct a logical qubit from physical qubits. In solid-state systems, a class of defects known as two-level systems is a major source of decoherence. Currently, superconducting qubit experiments reduce dissipation due to the two-level systems by using large device dimensions. However, this approach only provides partial protection and results in a trade-off between qubit size and dissipation. In this work, we instead engineer the interactions between a qubit and the surrounding two-level systems using phononics. We fabricate a superconducting qubit on a phononic-bandgap metamaterial that suppresses phonon emission mediated by the two-level systems. The phonon-engineered bath of two-level systems shows increased lifetime and affects the thermalization dynamics of the qubit. Within the phononic bandgap, we observe the emergence of a non-Markovian qubit behaviour. Further, combined with qubit miniaturization, our approach could substantially extend the qubit relaxation times.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Combustion and emissions technology

Combustor development is discussed as it relates to emissions reduction. The nature of the aircraft pollution problem is examined along with the aircraft pollution standards that have been established by the Environmental Protection Agency. The effect of engine operating conditions on pollutant formation levels is shown, as well as how close present-day engines are to meeting the established standards. The magnitude of the emissions reductions required to meet these standards is indicated. The progress that has been made in evolving the needed emissions reduction technology is the main topic.

Grobman, J.↗

New-Generation Carbon-Capture Ionic Liquids Regulated by Metal-Ion Coordination

Development of efficient carbon capture-and-release technologies with minimal energy input is a long-term challenge in mitigating CO 2 emissions, especially via CO 2 chemisorption driven by engineered chemical bond construction. Herein, taking advantage of the structural diversity of ionic liquids (ILs) in tuning their physical and chemical properties, precise reaction energy regulation of CO 2 chemisorption was demonstrated deploying metal-ion-amino-based ionic liquids (MAILs) as absorbents. The coordination ability of different metal sites (Cu, Zn, Co, Ni, and Mg) to amines was harnessed to achieve fine-tuning on stability constants of the metal ion-amine complexes, acting as the corresponding cations in the construction of diverse ILs coupled with CO 2 -philic anions. The as-afforded MAILs exhibited efficient and controllable CO 2 release behavior with great reduction in energy input and minimal sacrifice on CO 2 uptake capacity. This coordination-regulated approach offers new prospects for the development of ILs-based systems and beyond towards energy-efficient carbon capture technologies.

36 MATERIALS SCIENCE↗

Effects of Multicomponent Hydrocarbon Feed on Hydrocarbon Adsorption–Desorption and Oxidation Light-Off Behavior on a Pd/BEA Hydrocarbon Trap

A model hydrocarbon trap material consisting of palladium promoted zeolite beta on a monolith core was studied with a multicomponent hydrocarbon feed. Dodecane and ethylene adsorption, followed by temperature programmed oxidation (TPO), was used in the presence of CO in wet and dry conditions to study the impact of various species on hydrocarbon storage, oxidation, and desorption. Low temperature adsorption experiments were used to quantify hydrocarbon storage capacity, while temperature programmed desorption (TPD) and TPO studies were used to investigate both oxidation and desorption of the various hydrocarbon species. Here, the low temperature adsorption experiments suggest a moderate impact of water on dodecane uptake as dry experiments adsorbed more dodecane overall than those under wet conditions. Additionally, the presence of CO and ethylene also impaired dodecane uptake. TPD studies indicated a coupled relationship between hydrocarbon oxidation light-off and desorption. By varying the composition of the feed, specifically via the inclusion of CO or ethylene, dodecane oxidation light-off was delayed, which actually increased the overall hydrocarbon trap efficiency.

42 ENGINEERING↗

A SCR Model Calibration Approach with Spatially Resolved Measurements and NH 3 Storage Distributions

The selective catalytic reduction (SCR) is a technology used for reducing NO x emissions in the heavy-duty diesel (HDD) engine exhaust. In this study, the spatially resolved capillary inlet infrared spectroscopy (Spaci-IR) technique was used to study the gas concentration and NH 3 storage distributions in a SCR catalyst, and to provide data for developing a SCR model to analyze the axial gaseous concentration and axial distributions of NH 3 storage. A two-site SCR model is described for simulating the reaction mechanisms. The model equations and a calculation method was developed using the Spaci-IR measurements to determine the NH 3 storage capacity and the relationships between certain kinetic parameters of the model. Moreover, a calibration approach was then applied for tuning the kinetic parameters using the spatial gaseous measurements and calculated NH3 storage as a function of axial position instead of inlet and outlet gaseous concentrations of NO, NO 2 , and NH 3 . The equations and the approach for determining the NH 3 storage capacity of the catalyst and a method of dividing the NH 3 storage capacity between the two storage sites are presented. It was determined that the kinetic parameters of the adsorption and desorption reactions have to follow certain relationships for the model to simulate the experimental data. Finally, the modeling results served as a basis for developing full model calibrations to SCR lab reactor and engine data and state estimator development as described in the references (Song et al. 2013a, b; Surenahalli et al. 2013).

54 ENVIRONMENTAL SCIENCES↗

Passive NO x adsorption on Pd/H-ZSM-5: Experiments and modeling

A combined experimental and modeling study of the passive NO x adsorber (PNA) is presented that advances the understanding and prediction of the effects of various operating parameters and material properties of H-ZSM-5 and Pd/H-ZSM-5. Experiments reveal the NO x uptake process to be kinetically limited. Two microkinetic schemes are developed to explain the NO x uptake and release and NO 2 generation data. Both schemes are incorporated into a 1+1 D monolith model to predict and validate NO x uptake and temperature programmed desorption (TPD) data. Scheme I involves Z – [PdOH] + , Z – Pd 2+ Z – and Z – Pd + with Z – Pd + as the strongest NO binding site. Scheme II involves reduction of PdO 2 to PdO and nitrate formation. Model tuning utilizes a combination of infrared spectroscopy measurements and density functional theory (DFT) estimates of energy barriers. Lastly, the model is validated at different conditions including feed parameters and Pd loading.

42 ENGINEERING↗

Non-Boltzmann Effects in Chain Branching and Pathway Branching for Diethyl Ether Oxidation

Low-temperature (LT) engine applications have several potential benefits, including reduced emissions and increased efficiency. Attaining these benefits requires accurate kinetic modeling of LT chain branching, which depends heavily on ketohydroperoxide (KHP) decomposition. For diethyl ether (DEE), a promising biofuel, current estimates of the KHP decomposition rate constant are largely based on empirical fits to data. In this study, we investigate the most important KHP isomer in DEE LT oxidation by applying variable reaction coordinate transition state theory to the main pathway for KHP decomposition: OO bond fission to produce •OH and a keto-alkoxy radical, •OQ'O. We also use ab initio kinetics methods to investigate the decomposition of •OQ'O, where we find dominant branching to acetic acid, with the remaining flux going to CH 3 C(O)OCHO. Additionally, new time-resolved measurements of DEE and acetic acid concentrations during LT (450–600 K) DEE oxidation are obtained in a laser photolysis flow reactor coupled with multiplexed photoionization mass spectrometry. These new experimental data, along with jet-stirred reactor data in the literature, are compared with the predictions of a recent DEE mechanism (Tran et al. Proc. Comb. Inst. 2019, 37, 511-519) that was modified with the newly calculated ab initio rate constants for KHP and •OQ'O decomposition. The predictions of the modified mechanism are quite poor when compared to the experimental data; this is primarily due to the new KHP ⇌ •OQ'O + •OH rate constant, which is 1–2 orders of magnitude slower than empirical values employed in recent mechanisms. To reconcile the new KHP rate constant and the experimental data, we explore and quantify the possible role of non-Boltzmann (nB) reaction sequences. The nB reactions have a substantial effect on both the overall mechanism reactivity and the •OQ'O branching to acetic acid. We also provide guidance on the proper implementation of nB reactions in kinetic mechanisms.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Synthesis and Evaluation of Cu-SAPO-34 Catalysts for Ammonia Selective Catalytic Reduction. 1. Aqueous Solution Ion Exchange

SAPO-34 molecular sieves are synthesized using various structure directing agents (SDAs). Cu-SAPO-34 catalysts are prepared via aqueous solution ion exchange. Catalysts are characterized with surface area/pore volume measurements, temperature programmed reduction (TPR), electron paramagnetic resonance (EPR) and nuclear magnetic resonance (NMR) spectroscopies. Catalytic properties are examined using standard ammonia selective catalytic reduction (NH3-SCR) and ammonia oxidation reactions. During solution ion exchange, different SAPO-34 samples undergo different extent of structural damage via irreversible hydrolysis. Si content within the samples (i.e., Al-O-Si bond density) and framework stress are key factors that affect irreversible hydrolysis. Even using very dilute Cu acetate solutions, it is not possible to generate Cu-SAPO-34 samples with only isolated Cu2+ ions. Small amounts of CuOx species always coexist with isolated Cu2+ ions. Highly active and selective Cu-SAPO-34 catalysts for NH3-SCR are readily generated using this synthesis protocol, even for SAPO-34 samples that degrade substantially during solution ion exchange. High-temperature aging is found to improve the catalytic performance. This is likely due to reduction of intracrystalline mass-transfer limitations via formation of additional porosity in the highly defective SAPO-34 particles formed after ion exchange. The authors gratefully acknowledge the US Department of Energy (DOE), Office of Energy Efficiency and Renewable Energy, Office of Vehicle Technologies for the support of this work. The research described in this paper was performed at the Environmental Molecular Sciences Laboratory (EMSL), a national scientific user facility sponsored by the DOE’s Office of Biological and Environmental Research and located at Pacific Northwest National Laboratory (PNNL). PNNL is operated for the US DOE by Battelle Memorial Institute under contract number DE-AC05-76RL01830.

chabazite↗

Greenhouse gas consequences of the China dual credit policy

For over ten years, China has been the largest vehicle market in the world. In order to address energy security and air quality concerns, China issued the Dual Credit policy to improve vehicle efficiency and accelerate New Energy Vehicle adoption. In this paper, a market-penetration model is combined with a vehicle fleet model to assess implications on greenhouse gas (GHG) emissions and energy demand. Here we use this integrated modeling framework to study several scenarios, including hypothetical policy tweaks, oil price, battery cost and charging infrastructure for the Chinese passenger vehicle fleet. The model shows that the total GHGs of the Chinese passenger vehicle fleet are expected to peak in 2032 under the Dual Credit policy. A significant reduction in GHG emissions is possible if more efficient internal combustion engines continue to be part of the technology mix in the short term with more New Energy Vehicle penetration in the long term.

54 ENVIRONMENTAL SCIENCES↗

The role of chalcogen vacancies for atomic defect emission in MoS 2

For two-dimensional (2D) layered semiconductors, control over atomic defects and understanding of their electronic and optical functionality represent major challenges towards developing a mature semiconductor technology using such materials. Here, we correlate generation, optical spectroscopy, atomic resolution imaging, and ab initio theory of chalcogen vacancies in monolayer MoS 2 . Chalcogen vacancies are selectively generated by in-vacuo annealing, but also focused ion beam exposure. The defect generation rate, atomic imaging and the optical signatures support this claim. We discriminate the narrow linewidth photoluminescence signatures of vacancies, resulting predominantly from localized defect orbitals, from broad luminescence features in the same spectral range, resulting from adsorbates. Vacancies can be patterned with a precision below 10 nm by ion beams, show single photon emission, and open the possibility for advanced defect engineering of 2D semiconductors at the ultimate scale.

36 MATERIALS SCIENCE↗

Land radiative management as contributor to regional-scale climate adaptation and mitigation

The urgency to reduce greenhouse gas emissions has been recognized, but the goal of limiting global temperature rise “well below 2 degrees” and possibly down to 1.5°C remains highly challenging, despite the large regional consequences. Slow progress in the reduction of CO2 emissions have led to the discussion of climate engineering schemes,, which remain controversial within the climate research communityIn particular, the reduction of global mean temperature via solar radiation management (SRMglob) could lead to strong regional disparities. Here we show, based on a literature review and climate model simulations, that regional land radiative management (LRMreg), a generally little-considered option in assessments of climate engineering could help reduce warming (and in particular hot extremes) in densely populated and major agricultural land regions. Several ethical issues would remain with the application of LRMreg, and its efficacy would also be limited in time and space related to crop growing periods and constraints on agricultural management. However, through its regional focus and reliance on tested techniques, LRMreg avoids main shortcomings associated with SRMglob. We argue therefore that albedo-related climate benefits of land management should be considered when assessing ecosystem services and integrated in scenarios of regional-scale climate adaptation and mitigation.

Seneviratne, Sonia I. (ORCID:0000000195282917)↗

Influence of discharge polarity on streamer breakdown criterion of ambient air in a non-uniform electric field

Streamer breakdown of atmospheric air with non-uniform dc electric field in a needle-to-plate electrode configuration is studied using a semi-analytic model and experimental measurements. A high voltage (either positive or negative) is applied to a hollow needle with 0.51 mm outer diameter and 0.25 mm inner diameter separated from a planar ground electrode by a gap distance of 0.1–1.4 cm. Breakdown voltages are recorded for both positive and negative discharge polarities. Empirical relations between the critical avalanche size for streamer breakdown and the gap distance are proposed. Using these empirical relations, a semi-analytic model based on Meek's criterion for streamer breakdown is developed to accurately predict the measured breakdown voltages. It is found that for pd > 380 Torr cm (or d > 0.5 cm at one atmosphere) streamer breakdown of ambient air occurs at a lower applied voltage for a positively biased needle compared to that with a negatively biased needle, referred as the polarity effect. For pd < 380 Torr cm breakdown is attained at a lower applied voltage with a negatively biased needle compared to that with a positively biased needle, and breakdown mode transits from the polarity effect to the so called inverted polarity effect.

42 ENGINEERING↗

Secondary electron emission for reticulated carbon foam surfaces using direct measurements and spectroscopic analysis

This study investigates secondary electron emission (SEE) characteristics of reticulated foams using direct measurements and analytical modeling. Total SEE was quantified, revealing suppression of up to 44% in carbon foam structures compared to planar graphite surfaces. An optimal geometric configuration was identified and supported by analytical models. SEE angular dependence experiments showed diverse behaviors: fiber-like behavior and directional dependence for pore and ligaments on the mm scale, with fuzz-like characteristics when the foam features are between 10–100 µm. Electron energy analyzer measurements showed that carbon foams preferentially suppress inelastic backscattered electrons (BSEs) more so than true secondary electrons (SEs). The analysis indicated a larger fraction of low-energy SE generation in foams compared to flat surfaces due to increased emission from curved fiber ligaments and tertiary SEs from high-energy BSEs. These findings have implications for design and optimization of materials with tailored electron emission properties for applications like plasma-facing components, spacecraft materials, and accelerator surfaces.

Auger↗

An Optimization Framework for Driver Feedback Systems

Modern vehicles have sophisticated electronic control units that can control engine operation with discretion to balance fuel economy, emissions, and power. These control units are designed for specific driving conditions (e.g., different speed profiles for highway and city driving). However, individual driving styles are different and rarely match the specific driving conditions for which the units were designed. In the research reported here, we investigate driving-style factors that have a major impact on fuel economy and construct an optimization framework to optimize individual driving styles with respect to these driving factors. In this context, we construct a set of polynomial metamodels to reflect the responses produced in fuel economy by changing the driving factors. Then, we compare the optimized driving styles to the original driving styles and evaluate the effectiveness of the optimization framework. Finally, we use this proposed framework to develop a real-time feedback system, including visual instructions, to enable drivers to alter their driving styles in response to actual driving conditions to improve fuel efficiency.

and transportation↗