Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “ECS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,621 records · Page 90

Validity of Five Satellite-Based Latent Heat Flux Algorithms for Semi-arid Ecosystems

Accurate estimation of latent heat flux (LE) is critical in characterizing semiarid ecosystems. Many LE algorithms have been developed during the past few decades. However, the algorithms have not been directly compared, particularly over global semiarid ecosystems. In this paper, we evaluated the performance of five LE models over semiarid ecosystems such as grassland, shrub, and savanna using the Fluxnet dataset of 68 eddy covariance (EC) sites during the period 2000–2009. We also used a modern-era retrospective analysis for research and applications (MERRA) dataset, the Normalized Difference Vegetation Index (NDVI) and Fractional Photosynthetically Active Radiation (FPAR) from the moderate resolution imaging spectroradiometer (MODIS) products; the leaf area index (LAI) from the global land surface satellite (GLASS) products; and the digital elevation model (DEM) from shuttle radar topography mission (SRTM30) dataset to generate LE at region scale during the period 2003–2006. The models were the moderate resolution imaging spectroradiometer LE (MOD16) algorithm, revised remote sensing based Penman–Monteith LE algorithm (RRS), the Priestley–Taylor LE algorithm of the Jet Propulsion Laboratory (PT-JPL), the modified satellite-based Priestley–Taylor LE algorithm (MS-PT), and the semi-empirical Penman LE algorithm (UMD). Direct comparison with ground measured LE showed the PT-JPL and MS-PT algorithms had relative high performance over semiarid ecosystems with the coefficient of determination (R2) ranging from 0.6 to 0.8 and root mean squared error (RMSE) of approximately 20 W/m 2 . Empirical parameters in the structure algorithms of MOD16 and RRS, and calibrated coefficients of the UMD algorithm may be the cause of the reduced performance of these LE algorithms with R2 ranging from 0.5 to 0.7 and RMSE ranging from 20 to 35 W/m 2 for MOD16, RRS and UMD. Sensitivity analysis showed that radiation and vegetation terms were the dominating variables affecting LE Fluxes in global semiarid ecosystem.

97 MATHEMATICS AND COMPUTING↗

Assessment of Water Quality in Indo-Gangetic Plain of South-Eastern Asia under Organic vs. Conventional Rice Farming

Water contamination is often reported in agriculturally intensive areas such as the Indo-Gangetic Plain (IGP) in south-eastern Asia. We evaluated the impact of the organic and conventional farming of basmati rice on water quality during the rainy season (July to October) of 2011 and 2016 at Kaithal, Haryana, India. The study area comprised seven organic and seven conventional fields where organic farming has been practiced for more than two decades. Water quality parameters used for drinking (nitrate, NO 3 ; total dissolved solids (TDS); electrical conductivity (EC) pH) and irrigation (sodium adsorption ratio (SAR) and residual sodium carbonate (RSC)) purposes were below permissible limits for all samples collected from organic fields and those from conventional fields over the long-term (~15 and ~20 years). Importantly, the magnitude of water NO 3 contamination in conventional fields was approximately double that of organic fields, which is quite alarming and needs attention in future for farming practices in the IGP in south-eastern Asia.

54 ENVIRONMENTAL SCIENCES↗

Laboratory measurements of the K-shell transition energies in L-shell ions of Si and S [Energy measurements of K-shell transitions in L-shell ions of Si and S]

We have measured the energies of the strongest 1s–2${\ell }\ ({\ell }={\rm{s}},{\rm{p}})$ transitions in He- through Ne-like silicon and sulfur ions to an accuracy of $\lt 1\,\mathrm{eV}$ using the Lawrence Livermore National Laboratory's electron beam ion traps, EBIT-I and SuperEBIT, and the NASA/GSFC EBIT Calorimeter Spectrometer (ECS). We identify and measure the energies of 18 and 21 X-ray features from silicon and sulfur, respectively. The results are compared to new Flexible Atomic Code calculations and to semi-relativistic Hartree–Fock calculations by Palmeri et al. (2008). These results will be especially useful for wind diagnostics in high-mass X-ray binaries, such as Vela X-1 and Cygnus X-1, where high-resolution spectral measurements using Chandra's high-energy transmission grating has made it possible to measure Doppler shifts of $100\,\mathrm{km}\,{{\rm{s}}}^{-1}$. The accuracy of our measurements is consistent with that needed to analyze Chandra observations, exceeding Chandra's $100\,\mathrm{km}\,{{\rm{s}}}^{-1}$ limit. Hence, the results presented here not only provide benchmarks for theory, but also accurate rest energies that can be used to determine the bulk motion of material in astrophysical sources. Finally, we show the usefulness of our results by applying them to redetermine Doppler shifts from Chandra observations of Vela X-1.

74 ATOMIC AND MOLECULAR PHYSICS↗

A SUBTLE INFRARED EXCESS ASSOCIATED WITH A YOUNG WHITE DWARF IN THE EDINBURGH-CAPE BLUE OBJECT SURVEY

We report the discovery of a subtle infrared excess associated with the young white dwarf EC 05365–4749 at 3.35 and 4.6 μ m. Follow-up spectroscopic observations are consistent with a hydrogen atmosphere white dwarf of effective temperature 22,800 K and log [ g (cm s{sup −2})] = 8.19. High-resolution spectroscopy reveals atmospheric metal pollution with logarithmic abundances of [Mg/H] = −5.36 and [Ca/H] = −5.75, confirming the white dwarf is actively accreting from a metal-rich source with an intriguing abundance pattern. We find that the infrared excess is well modeled by a flat, opaque debris disk, though disk parameters are not well constrained by the small number of infrared excess points. We further demonstrate that relaxing the assumption of a circular dusty debris disk to include elliptical disks expands the widths of acceptable disks, adding an alternative interpretation to the subtle infrared excesses commonly observed around young white dwarfs.

79 ASTRONOMY AND ASTROPHYSICS↗

Electron-capture and Low-mass Iron-core-collapse Supernovae: New Neutrino-radiation-hydrodynamics Simulations

We present new 1D (spherical) and 2D (axisymmetric) simulations of electron-capture (EC) and low-mass iron-core-collapse supernovae (SN). We consider six progenitor models: the ECSN progenitor from Nomoto; two ECSN-like low-mass low-metallicity iron-core progenitors from A. Heger (2016, private communication); and the 9, 10, and 11 ${M}_{\odot }$ (zero-age main-sequence) progenitors from Sukhbold et al. We confirm that the ECSN and ESCN-like progenitors explode easily even in 1D with explosion energies of up to a 0.15 Bethes ($1\ {\rm{B}}\equiv {10}^{51}\ \mathrm{erg}$), and are a viable mechanism for the production of very-low-mass neutron stars. However, the 9, 10, and 11 ${M}_{\odot }$ progenitors do not explode in 1D and are not even necessarily easier to explode than higher-mass progenitor stars in 2D. We study the effect of perturbations and of changes to the microphysics and we find that relatively small changes can result in qualitatively different outcomes, even in 1D, for models sufficiently close to the explosion threshold. Finally, we revisit the impact of convection below the protoneutron star (PNS) surface. We analyze 1D and 2D evolutions of PNSs subject to the same boundary conditions. Lastly, we find that the impact of PNS convection has been underestimated in previous studies and could result in an increase of the neutrino luminosity by up to factors of two.

79 ASTRONOMY AND ASTROPHYSICS↗

Characteristics of the IBEX Ribbon and Their Implications for a Source Region Outside the Heliopause

This paper presents a comprehensive exploration of the Interstellar Boundary Explorer energetic neutral atom (ENA) ribbon, focusing on its spatial and temporal variations over 14 yr. Methodological advancements, including a refined map modeling procedure and a new ribbon separation technique with appropriate error propagation, enable a detailed investigation of the ribbon’s features. Utilizing statistically robust metrics, this study reveals details of the ribbon across energy and time. Key findings include energy- and time-dependent variations in flux, angular radius, ribbon profile width, and higher moments. By applying these metrics, we reveal new complexity to the evolution of the ribbon over time, highlighting the nuanced relationship between it and the solar wind. Furthermore, the study examines for the first time the ribbon as it passes through the starboard/heliotail region (Lon EC 120°–180°), revealing properties distinct from other portions of the ribbon. The analysis uncovers an anticorrelation between ribbon width and flux, which provides quantitative support for a multisource ribbon created by a combination of solar wind neutrals that generate a spatiall narrow ribbon component and heliosheath neutrals giving rise to a broad component. Finally, differences in the temporal evolution of the ENA flux at different energies provide additional support that the location of the ribbon source region is beyond the heliopause.

79 ASTRONOMY AND ASTROPHYSICS↗

Laboratory Measurements of n >= 3 K-shell Transition Energies of Sulfur Ions from F-like S viii to Li-like S xiv

Inner-shell transitions are ubiquitous in nonequilibrium collisionally ionized plasmas, such as supernova remnants, and in photoionized plasmas, such as outflows from active galactic nuclei and X-ray binaries. Inner-shell X-ray emission can help determine key parameters of these systems, such as ionization time, τ, and ionization parameter, ξ. Despite their importance, only theoretical inner-shell transition energies are available for many ions. To provide experimental benchmarks, we have measured the dominant n → 1 K-shell transitions of sulfur ions where n ≥ 3 from Li-like S xiv to F-like S viii using LLNL’s SuperEBIT electron beam ion trap and the NASA/GSFC EBIT Calorimeter Spectrometer (ECS). We identify over 30 spectral features and measure their energies with uncertainties in the ∼0.1–1 eV range. We compare these results to Flexible Atomic Code (FAC) and multireference Møller–Plesset (MR-MP) calculations and find differences between theory and experiment of ∼1 eV for FAC and <0.5 eV for most MR-MP calculations. We also compare these results to two widely used atomic databases, AtomDB and CHIANTI, and find discrepancies as high as 7 eV. Furthermore, many transitions are missing from these databases despite being prominent in our data.

Atomic data benchmarking↗

Electron Energy Partition across Interplanetary Shocks. II. Statistics

Abstract A statistical analysis of 15,210 electron velocity distribution function (VDF) fits, observed within ±2 hr of 52 interplanetary (IP) shocks by the Wind spacecraft near 1 au, is presented. This is the second in a three-part series on electron VDFs near IP shocks. The electron velocity moment statistics for the dense, low-energy core, tenuous, hot halo, and field-aligned beam/strahl are a statistically significant list of values illustrated with both histograms and tabular lists for reference and baselines in future work. Given the large statistics in this investigation, the beam/strahl fit results in the upstream are now the most comprehensive attempt to parameterize the beam/strahl electron velocity moments in the ambient solar wind. The median density, temperature, beta, and temperature anisotropy values for the core(halo)[beam/strahl] components, with subscripts ec(eh)[eb], of all fit results, respectively, are , , , and . This work will also serve as a 1 au baseline and reference for missions like Parker Solar Probe and Solar Orbiter .

79 ASTRONOMY AND ASTROPHYSICS↗

TheViral MetaGenome Annotation Pipeline (VMGAP):an automated tool for the functional annotation of viral Metagenomic shotgun sequencing data

In the past few years, the field of metagenomics has been growing at an accelerated pace, particularly in response to advancements in new sequencing technologies. The large volume of sequence data from novel organisms generated by metagenomic projects has triggered the development of specialized databases and tools focused on particular groups of organisms or data types. Here we describe a pipeline for the functional annotation of viral metagenomic sequence data. The Viral MetaGenome Annotation Pipeline (VMGAP) pipeline takes advantage of a number of specialized databases, such as collections of mobile genetic elements and environmental metagenomes to improve the classification and functional prediction of viral gene products. The pipeline assigns a functional term to each predicted protein sequence following a suite of comprehensive analyses whose results are ranked according to a priority rules hierarchy. Additional annotation is provided in the form of enzyme commission (EC) numbers, GO/MeGO terms and Hidden Markov Models together with supporting evidence.

59 BASIC BIOLOGICAL SCIENCES↗

The JCVI standard operating procedure for annotating prokaryotic metagenomic shotgun sequencing data

The JCVI metagenomics analysis pipeline provides for the efficient and consistent annotation of shotgun metagenomics sequencing data for sampling communities of prokaryotic organisms. The process can be equally applied to individual sequence reads from traditional Sanger capillary electrophoresis sequences, newer technologies such as 454 pyrosequencing, or sequence assemblies derived from one or more of these data types. It includes the analysis of both coding and non-coding genes, whether full-length or, as is often the case for shotgun metagenomics, fragmentary. The system is designed to provide the best-supported conservative functional annotation based on a combination of trusted homology-based scientific evidence and computational assertions and an annotation value hierarchy established through extensive manual curation. The functional annotation attributes assigned by this system include gene name, gene symbol, GO terms [1], EC numbers [2], and JCVI functional role categories [3].

59 BASIC BIOLOGICAL SCIENCES↗

Particulate Matter, Ozone, and Nitrogen Species in Aged Wildfire Plumes Observed at the Mount Bachelor Observatory

During the summer of 2012 and 2013, we measured carbon monoxide (CO), carbon dioxide (CO 2 ), ozone (O 3 ), nitrogen oxides (NO x ), reactive nitrogen (NO y ), peroxyacetyl nitrate (PAN), aerosol scattering (σ sp ) and absorption, elemental and organic carbon (EC and OC), and aerosol chemistry at the Mount Bachelor Observatory (2.8 km above sea level, Oregon, US). Here we analyze 23 of the individual plumes from regional wildfires to better understand production and loss of aerosols and gaseous species. We also developed a new method to calculate enhancement ratios and Modified Combustion Efficiency (MCE), which takes into account possible changes in background concentrations during transport. We compared this new method to existing methods for calculating enhancement ratios. The MCE values ranged from 0.79– 0.98, ΔO 3 /ΔCO ranged from 0.01–0.07 ppbv ppbv –1 , Δσ sp /ΔCO ranged from 0.23–1.32 Mm –1 (at STP) ppbv –1 , ΔNO y /ΔCO ranged from 2.89–12.82 pptv ppbv –1 , and ΔPAN/ΔCO ranged from 1.46–6.25 pptv ppbv–1. A comparison of three different methods to calculate enhancement ratios (ER) showed that the methods generally resulted in similar Δσ sp /ΔCO, ΔNO y /ΔCO, and ΔPAN/ΔCO; however, there was a significant bias between the methods when calculating ΔO 3 /ΔCO due to the small absolute enhancement of O 3 in the plumes. The ΔO 3 /ΔCO ERs calculated using two common methods were biased low (~20–30%) when compared to the new proposed method. Two pieces of evidence suggest moderate secondary particulate formation in many of the plumes studied: 1) mean observed ΔOC/ΔCO 2 was 0.028 g particulate-C gC –1 (as CO 2 )—27% higher than the midpoint of the biomass burning emission ratio range reported by a recent review—and 2) single scattering albedo (ω) was relatively constant at all MCE values, in contrast with results for fresh plumes. Lastly, the observed NO x , PAN, and aerosol nitrate represented 6–48%, 25–57%, and 20–69% of the observed NOy in the aged plumes, respectively, and other species represented on average 11% of the observed NO y .

54 ENVIRONMENTAL SCIENCES↗

Concentration Variations in Particulate Matter in Seoul Associated with Asian Dust and Smog Episodes

In this study, particulate species were measured in April–May 2003 at two sites, one in the megacity of Seoul and the other in the Deokjeok Island to the west of Seoul, to examine the effects of long-range transport under the influence of prevailing westerlies. The effects of Asian dust were observed in April, and a severe smog episode occurred in late May. During May, all air pollutants showed negative correlations with wind speed at Seoul, particularly for NO 2 and CO, a large proportion of which result from vehicle emissions. SO 4 2– continued to increase in association with an inflow of air pollutants from China with heavy use of coal, with fluctuations depending on wind speed. The smog episode in late May occurred as emissions from Siberian forest fires were superimposed on pollutant inflows from China that had persisted since early May and local emissions accumulated under stagnant conditions. During the episode, Siberian forest fires increased K + while local emissions primarily from vehicles increased NO 3 – , OC, and EC. The effects of an inflow of air pollutants from the outside were significant at Deokjeok, with small local emissions, resulting in substantial increases in Ca 2+ during the Asian dust event and SO 4 2– during the smog episode, compared to those at Seoul. Because both sites were strongly influenced by the effects of long-range transport in May, PM 2.5 along with SO 4 2– and K + exhibited a strong correlation between Seoul and Deokjeok.

54 ENVIRONMENTAL SCIENCES↗

Characterization of Particulate Matter Emissions from Heavy-Duty Partially Premixed Compression Ignition with Gasoline-Range Fuels

In this study, the compression ratio of a commercial 15L heavy-duty diesel engine was lowered and a split injection strategy was developed to promote partially premixed compression ignition (PPCI) combustion. Various low reactivity gasoline-range fuels were compared with ultra-low-sulfur diesel fuel (ULSD) for steady-state engine performance and emissions. Specially, particulate matter (PM) emissions were examined for their mass, size and number concentrations, and further characterized by organic/elemental carbon analysis, chemical speciation and thermogravimetric analysis. As more fuel-efficient PPCI combustion was promoted, a slight reduction in fuel consumption was observed for all gasoline-range fuels, which also had higher heating values than ULSD. Since mixing-controlled combustion dominated the latter part of the combustion process, hydrocarbon (HC) and carbon monoxide (CO) emissions were only slightly increased with the gasoline-range fuels. In contrast, soot emissions were significantly reduced with the gasoline-range fuels, including a ~70% reduction in micro soot sensor measurements and a >50% reduction in smoke meter measurements. All gasoline-range fuel PM samples were also found to contain higher amount of volatile species and organic carbon fractions compared to ULSD PM samples as measured by thermogravimetric and EC-OC analyses. Various partially oxidized HC species and nitrophenolic compounds were also detected by TDP-GC-MS and CE-MS techniques, which implied that more pronounced PPCI combustion occurred with the gasoline-range fuels. As a whole similar PM oxidation behavior was observed despite the differences in reactivity and chemical properties of the fuels, even though there may be some significant impacts under certain operating conditions.

33 ADVANCED PROPULSION SYSTEMS↗

Coupling field and laboratory measurements to estimate the emission factors of identified and unidentified trace gases for prescribed fires

Vegetative fuels commonly consumed in prescribed fires were collected from five locations in the southeastern and southwestern U.S. and burned in a series of 77 fires at the U.S. Forest Service Fire Sciences Laboratory in Missoula, Montana. The particulate matter (PM2.5) emissions were measured by gravimetric filter sampling with subsequent analysis for elemental carbon (EC), organic carbon (OC), and 38 elements. The trace gas emissions were measured with a large suite of state-of-the-art instrumentation including an open-path Fourier transform infrared (OP FTIR) spectrometer, proton-transfer-reaction mass spectrometry (PTR-MS), proton-transfer ion-trap mass spectrometry (PIT-MS), negative-ion proton-transfer chemical-ionization mass spectrometry (NI-PT-CIMS), and gas chromatography with MS detection (GC-MS). 204 trace gas species (mostly non-methane organic compounds (NMOC)) were identified and quantified with the above instruments. An additional 152 significant peaks in the unit mass resolution mass spectra were quantified, but either could not be identified or most of the signal at that molecular mass was unaccounted for by identifiable species. As phase II of this study, we conducted airborne and ground-based sampling of the emissions from real prescribed fires mostly in the same land management units where the fuels for the lab fires were collected. A broad variety, but smaller number of species (21 trace gas species and PM2.5) was measured on 14 fires in chaparral and oak savanna in the southwestern US, as well as pine forest understory in the southeastern US and Sierra Nevada mountains of California. These extensive field measurements of emission factors (EF) for temperate biomass burning are useful both for modeling and to examine the representativeness of our lab fire EF. The lab/field EF ratio for the pine understory fuels was not statistically different from one, on average. However, our lab EF for “smoldering compounds” emitted by burning the semi-arid SW fuels should likely be increased by about a factor of 2.7 to better represent field fires. Based on the lab/field comparison, we present a table with emission factors for 365 pyrogenic species (including unidentified species) for 4 broad fuel types: pine understory, semi-arid shrublands, evergreen canopy, and duff. To our knowledge this is the most complete measurement of biomass burning emissions to date and it should enable improved representation of smoke in atmospheric models. The results provide important insights into the nature of smoke. For example, ~35% (range from 16-71%) of the mass of gas-phase NMOC species was attributed to the species that we could not identify. These unidentified species are likely not represented in most models, but some provision should be made for the fact that they will react in the atmosphere. In addition, the total mass of gas-phase NMOC divided by the mass of co-emitted PM2.5 averaged ~2.6 for the main fire types with a range from ~1.8-8.8. About 36-63% of the NMOC were likely semivolatile or of intermediate volatility. Thus, the gas-phase NMOC represent a large reservoir of potential precursors for secondary formation of organic aerosol. For the one fire in organic soil (Alaskan duff) about 28% of the emitted carbon was present as gas-phase NMOC in contrast to the other fuels for which NMOC accounted for only ~1-3% of emitted carbon. 71% of the mass of NMOC emitted by the smoldering duff was un-identified. The duff results highlight the need to learn more about the emissions from smoldering organic soils. The NMOC/“NOx-as-NO” ratio was consistently about ten for the main fire types when accounting for all NMOC, indicating strongly NOx-limited O3 production conditions. Finally, the fuel consumption per unit area was measured on 6 of the 14 prescribed fires and averaged 7.08 ± 2.09 (1) Mg ha-1.

Yokelson, R. J.↗

Aerosol indirect effect on the grid-scale clouds in the two-way coupled WRF–CMAQ: model description, development, evaluation and regional analysis

This study implemented first, second and glaciation aerosol indirect effects (AIE) on resolved clouds in the two-way coupled Weather Research and Forecasting Community Multiscale Air Quality (WRF–CMAQ) modeling system by including parameterizations for both cloud drop and ice number concentrations on the basis of CMAQ-predicted aerosol distributions and WRF meteorological conditions. The performance of the newly developed WRF–CMAQ model, with alternate Community Atmospheric Model (CAM) and Rapid Radiative Transfer Model for GCMs (RRTMG) radiation schemes, was evaluated with observations from the Clouds and the See http://ceres.larc.nasa.gov/ . Earth's Radiant Energy System (CERES) satellite and surface monitoring networks (AQS, IMPROVE, CASTNET, STN, and PRISM) over the continental US (CONUS) (12 km resolution) and eastern Texas (4 km resolution) during August and September of 2006. The results at the Air Quality System (AQS) surface sites show that in August, the normalized mean bias (NMB) values for PM 2.5 over the eastern US (EUS) and the western US (WUS) are 5.3% (-0.1%) and 0.4% (-5.2%) for WRF–CMAQ/CAM (WRF–CMAQ/RRTMG), respectively. The evaluation of PM 2.5 chemical composition reveals that in August, WRF–CMAQ/CAM (WRF–CMAQ/RRTMG) consistently underestimated the observed SO 4 2- by -23.0% (-27.7%), -12.5% (-18.9%) and -7.9% (-14.8%) over the EUS at the Clean Air Status Trends Network (CASTNET), Interagency Monitoring of Protected Visual Environments (IMPROVE) and Speciated Trends Network (STN) sites, respectively. Both configurations (WRF–CMAQ/CAM, WRF–CMAQ/RRTMG) overestimated the observed mean organic carbon (OC), elemental carbon (EC) and and total carbon (TC) concentrations over the EUS in August at the IMPROVE sites. Both configurations generally underestimated the cloud field (shortwave cloud forcing, SWCF) over the CONUS in August due to the fact that the AIE on the subgrid convective clouds was not considered when the model simulations were run at the 12 km resolution. This is in agreement with the fact that both configurations captured SWCF and longwave cloud forcing (LWCF) very well for the 4 km simulation over eastern Texas, when all clouds were resolved by the finer resolution domain. The simulations of WRF–CMAQ/CAM and WRF–CMAQ/RRTMG show dramatic improvements for SWCF, LWCF, cloud optical depth (COD), cloud fractions and precipitation over the ocean relative to those of WRF default cases in August. The model performance in September is similar to that in August, except for a greater overestimation of PM 2.5 due to the overestimations of SO 4 2- , NH 4 + , NO 3 - , and TC over the EUS, less underestimation of clouds (SWCF) over the land areas due to the lower SWCF values, and fewer convective clouds in September. Finally, this work shows that inclusion of indirect aerosol effect treatments in WRF–CMAQ represents a significant advancement and milestone in air quality modeling and the development of integrated emissions control strategies for air quality management and climate change mitigation.

indirect aerosol forcing↗

Field characterization of the PM 2:5 Aerosol Chemical Speciation Monitor: insights into the composition, sources, and processes of fine particles in eastern China

A PM 2.5 -capable aerosol chemical speciation monitor (Q-ACSM) was deployed in urban Nanjing, China, for the first time to measure in situ non-refractory fine particle (NR-PM 2.5 ) composition from 20 October to 19 November 2015, along with parallel measurements of submicron aerosol (PM 1 ) species by a standard Q-ACSM. Our results show that the NR-PM 2.5 species (organics, sulfate, nitrate, and ammonium) measured by the PM 2.5 -Q-ACSM are highly correlated ( r 2 &gt; 0.9) with those measured by a Sunset Lab OC / EC analyzer and a Monitor for AeRosols and GAses (MARGA). The comparisons between the two Q-ACSMs illustrated similar temporal variations in all NR species between PM 1 and PM 2.5 , yet substantial mass fractions of aerosol species were observed in the size range of 1–2.5 µm. On average, NR-PM 1-2.5 contributed 53 % of the total NR-PM 2.5 , with sulfate and secondary organic aerosols (SOAs) being the two largest contributors (26 and 27 %, respectively). Positive matrix factorization of organic aerosol showed similar temporal variations in both primary and secondary OAs between PM 1 and PM 2.5 , although the mass spectra were slightly different due to more thermal decomposition on the capture vaporizer of the PM 2.5 -Q-ACSM. We observed an enhancement of SOA under high relative humidity conditions, which is associated with simultaneous increases in aerosol pH, gas-phase species (NO 2 , SO 2 , and NH 3 ) concentrations and aerosol water content driven by secondary inorganic aerosols. These results likely indicate an enhanced reactive uptake of SOA precursors upon aqueous particles. Therefore, reducing anthropogenic NO x , SO 2 , and NH 3 emissions might not only reduce secondary inorganic aerosols but also the SOA burden during haze episodes in China.

54 ENVIRONMENTAL SCIENCES↗

Turbulent transport of energy across a forest and a semiarid shrubland

The role of secondary circulations has recently been studied in the context of well-defined surface heterogeneity in a semiarid ecosystem where it was found that energy balance closure over a desert–forest system and the structure of the boundary layer was impacted by advection and flux divergence. As a part of the CliFF (Climate feedbacks and benefits of semi-arid forests, a collaboration between KIT, Germany, and the Weizmann Institute, Israel) campaign, we studied the boundary layer dynamics and turbulent transport of energy corresponding to this effect in Yatir Forest situated in the Negev Desert in Israel. The forest surrounded by small shrubs presents a distinct feature of surface heterogeneity, allowing us to study the differences between their interactions with the atmosphere above by conducting measurements with two eddy covariance (EC) stations and two Doppler lidars. As expected, the turbulence intensity and vertical fluxes of momentum and sensible heat are found to be higher above the forest compared to the shrubland. Turbulent statistics indicative of nonlocal motions are also found to differ over the forest and shrubland and also display a strong diurnal cycle. The production of turbulent kinetic energy (TKE) over the forest is strongly mechanical, while buoyancy effects generate most of the TKE over the shrubland. Overall TKE production is much higher above the forest compared to the shrubland. The forest is also found to be more efficient in dissipating TKE. The TKE budget appears to be balanced on average both for the forest and shrubland, although the imbalance of the TKE budget, which includes the role of TKE transport, is found to be quite different in terms of diurnal cycles for the forest and shrubland. The difference in turbulent quantities and the relationships between the components of TKE budget are then used to infer the characteristics of the turbulent transport of energy between the desert and the forest.

54 ENVIRONMENTAL SCIENCES↗

Estimating scalar turbulent fluxes with slow-response sensors in the stable atmospheric boundary layer

Conventional and recently developed approaches for estimating turbulent scalar fluxes under stable atmospheric conditions are evaluated, with a focus on gases for which fast sensors are not readily available. First, the relaxed eddy accumulation (REA) classical approach and a recently proposed mixing length parameterization, labeled A22, are tested against eddy-covariance computations. Using high-frequency measurements collected from two contrasting sites (the frozen tundra near Utqiaġvik, Alaska, and a sparsely vegetated grassland in Wendell, Idaho, during winter), it is shown that the REA and A22 models outperform the conventional Monin–Obukhov similarity theory (MOST) utilized widely to infer fluxes from mean gradients. Second, scenarios where slow trace gas sensors are the only viable option in field measurements are investigated using digital filtering applied to fast-response sensors to simulate their slow-response counterparts. With a filtered scalar signal, the observed filtered eddy-covariance fluxes are referred to here as large-eddy-covariance (LEC) fluxes. A virtual eddy accumulation (VEA) approach, akin to the REA model but not requiring a mechanical apparatus to separate the gas flows, is also formulated and tested. A22 outperforms VEA and LEC in predicting the observed unfiltered (total) eddy-covariance (EC) fluxes; however, VEA can still capture the LEC fluxes well. This finding motivates the introduction of a sensor response time correction into the VEA formulation to offset the effect of sensor filtering on the underestimated net averaged fluxes. The only needed parameter for this correction is the mean velocity at the instrument height, a surrogate of the advective timescale. The VEA approach is very suitable and simple to use with gas sensors of intermediate speed (∼ 0.5 to 1 Hz) and with conventional open- or closed-path setups.

58 GEOSCIENCES↗