Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Determinants”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,621 records · Page 90

Solubility of pyromorphite Pb 5 (PO 4 ) 3 Cl at 5–65°C and its experimentally determined thermodynamic parameters

Here, the solubility of synthetic pyromorphite Pb 5 (PO 4 ) 3 Cl was determined in a series of dissolution experiments conducted at 5–65 °C and at pH = 2.0. The equilibrium was established within 4 months. The dissolution of pyromorphite was congruent at all the temperatures, and the measured solubility product log K sp,298 for the dissolution reaction: Pb 5 (PO 4 ) 3 Cl ⇌ 5Pb 2+ + 3PO 4 3- + Cl - was determined to be –79.6 ± 0.15. The equilibrium ion activity product of pyromorphite increased with temperature, indicating a positive enthalpy of the dissolution reaction in the temperature range from 5 to 65 °C. The temperature dependence of the log K sp was nonlinear: log K sp = A – B/T + D log(T), where A = 478.77 ± 136.62, B = 29,378 ± 6215, and D = –185.81 ± 46.77. This allowed for calculation of ΔG° r = 454.0 ± 1.7 kJ·mol –1 , ΔH° r = 101.8 ± 6.0 J·mol –1 ·K –1 , ΔC° p,r = –1545 ± 388.9 J·mol –1 ·K –1 , and ΔS° r = –1181 ± 382 J·mol –1 ·K –1 of the dissolution reaction. Using these values and the published standard state quantities for constituent ions, the values of ΔG° f = –3764.3 ± 3.5 kJ·mol –1 , ΔH° f = –4108.4 ± 7.9 J·mol –1 ·K –1 , S° f = 622 ± 382 J·mol –1 ·K –1 , and C° pf = 402 ± 398 J·mol –1 ·K –1 were calculated for synthetic pyromorphite Pb 5 (PO 4 ) 3 Cl.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Accurate determination of density, surface tension, and vessel depth using a triple bubbler system

Here, a triple bubbler sensor was developed for use in high temperature molten salt systems used in pyroprocessing to determine the density, surface tension, and depth of the molten salt. Preliminary bubbler testing was performed in aqueous solutions to calibrate and validate the bubbler sensor. Independently determined fluid property values and depths were compared to the calculated values and the percent differences were less than 0.16 %, 3.38 %, and 0.31 % for density, surface tension, and depth, respectively. In addition, uncertainties were within 0.04 %, 1.25 %, and 0.15 % for density, surface tension, and depth, respectively.

98 NUCLEAR DISARMAMENT, SAFEGUARDS, AND PHYSICAL P↗

Molecular Determinants of Substrate Specificity in Plant 5-Methylthioadenosine Nucleosidases

5?-Methylthioadenosine (MTA)/S-adenosylhomocysteine (SAH) nucleosidase (MTAN) is essential for cellular metabolism and development in many bacterial species. While the enzyme is found in plants, plant MTANs appear to select for MTA preferentially, with little or no affinity for SAH. To understand what determines substrate specificity in this enzyme, MTAN homologues from Arabidopsis thaliana (AtMTAN1 and AtMTAN2, which are referred to as AtMTN1 and AtMTN2 in the plant literature) have been characterized kinetically. While both homologues hydrolyze MTA with comparable kinetic parameters, only AtMTAN2 shows activity towards SAH. AtMTAN2 also has higher catalytic activity towards other substrate analogues with longer 5?-substituents. The structures of apo AtMTAN1 and its complexes with the substrate- and transition-state-analogues, 5?-methylthiotubercidin and formycin A, respectively, have been determined at 2.0-1.8 Angstroms resolution. A homology model of AtMTAN2 was generated using the AtMTAN1 structures. Comparison of the AtMTAN1 and AtMTAN2 structures reveals that only three residues in the active site differ between the two enzymes. Our analysis suggests that two of these residues, Leu181/Met168 and Phe148/Leu135 in AtMTAN1/AtMTAN2, likely account for the divergence in specificity of the enzymes. Comparison of the AtMTAN1 and available Escherichia coli MTAN (EcMTAN) structures suggests that a combination of differences in the 5?-alkylthio binding region and reduced conformational flexibility in the AtMTAN1 active site likely contribute to its reduced efficiency in binding substrate analogues with longer 5?-substituents. In addition, in contrast to EcMTAN, the active site of AtMTAN1 remains solvated in its ligand-bound forms. As the apparent pKa of an amino acid depends on its local environment, the putative catalytic acid Asp225 in AtMTAN1 may not be protonated at physiological pH and this suggests the transition state of AtMTAN1, like human MTA phosphorylase and Streptococcus pneumoniae MTAN, may be different from that found in EcMTAN.

59 BASIC BIOLOGICAL SCIENCES↗

On the Determination of C0 (or A0), D0K, H0K, and Some Dark States for Symmetric-top Molecules from Infrared Spectra without the Need for Localized Perturbations

For symmetric top molecules, the normal Δk = 0, Δl = 0 and Δk = ±1, Δl = ±1 selection rules for parallel and perpendicular bands, respectively, do not allow the determination of the K-dependent rotational constants, C 0 (or A 0 ), D 0 K , and H 0 K . However, we show here that several different combinations of allowed and apparently unperturbed rovibrational infrared transitions can give access to those constants. A necessary ingredient for the application of this technique is a band with selection rules Δk = ±1 (or Δk = 0), Δl = ∓2, such as an overtone or difference band, and appropriate other bands. Bands with selection rules Δk = ±2, Δl = ∓1 are also useful but are seldom found. As a general rule, more than one vibrational transition is needed. Examples are given for boron trifluoride (BF 3 ), sulfur trioxide (SO 3 ), and cyclopropane (C 3 H 6 ) for which there are microwave measurements that provide a check on the derived constants. The technique is also extended to a D 2d molecule, allene, even though we have no measurements to use as an example. Examples are also given for the determination of dark states from difference bands, and/or hot bands, and also whole forbidden bands that arise from mixing with distant energy levels.

Environmental Molecular Sciences Laboratory↗

Micron-sized spinel crystals in high level waste glass compositions: Determination of crystal size and crystal fraction

The compositions utilized for immobilization of nuclear waste are controlled using glass property models to avoid the deleterious effects of crystallization in the high-level waste (HLW) vitrification melters. The type and size of the crystals that precipitate during melter operations (typically at 1150 °C) and idling (~ 1000 °C) are significantly impacted by glass composition and thermal history. This study was conducted to measure the impact of melt composition and heat treatment temperature on crystal size and fraction. A matrix of 31 multi-component glasses canvasing the expected Hanford HLW compositional space was developed and the glasses fabricated and heat treated at 850 = T = 950°C. The crystal filling fraction values, as determined by X-ray diffraction, varied from 0.2 to 41.0 wt%. Spinel filling fraction values ranged from 0.0 to 13.8 wt%. One glass of the matrix did not precipitate spinel and contained 0.2 wt% RuO 2 , which was assumed to be undissolved from the melting process. All compositions contained crystals in the as-quenched glass. All of the spinel based crystals present in the glasses were less than 10 µm in diameter, as determined by scanning electron microscopy. Composition and temperature dependent models were generated using the resulting data and the best model fit was obtained by only considering spinel filling fractions (R 2 = 0.83). Two glasses were unable to be characterized due to an inability to process the glass under the conditions of this study. Those glasses were utilized to give insight into a potential multi-component constraint to aid in future statistical composition designs.

Lonergan, C. E.↗

A novel approach to determine the local burnup in irradiated fuels using Atom Probe Tomography (APT)

A novel approach is presented to determine the local burnup in irradiated fuels using isotopic quantification obtained by Atom Probe Tomography (APT). Considering the volume of sample used (<100 μm 3 ) for APT experiments using the lift-out process in a scanning electron microscope equipped with a Focused Ion Beam (FIB), the presented method determines the local burnup from a nuclear fuel, where a minimal amount of waste is produced. In this work, three samples were analyzed with different burnup conditions: as received low enriched 19.8% U-235, intermediate burnup (~52% U-235 fissioned) and high burnup (~69% U-235 fissioned) U–Mo fuel. APT is used to quantify the isotopes of 235 U, 236 U, 238 U, 239 Pu and 237 Np for burnup calculation in the irradiated metallic U–7Mo dispersion fuel. The equation used to estimate the burnup of fuels is derived by considering that the initial counts of U is equal to the sum of remaining atoms of U isotopes and all the U reactions undergone during irradiation. Here, this method provides U enrichment and local burnup with an unprecedented high spatial resolution based on quantification of isotopic ratios of U.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗

Determination of the hydrogen heat of transport in Zircaloy-4

During operation in a nuclear reactor, Zr-based nuclear fuel cladding is subject to waterside corrosion which can lead to hydrogen ingress. Here, the hydrogen that enters the material will migrate to colder spots and precipitate as zirconium hydrides if the hydrogen content exceeds the hydrogen terminal solid solubility in the material. Since a temperature gradient is established in the radial direction of the cladding during operation, the hydrides can preferentially precipitate at the colder outer surface of the cladding. Other gradients can also occur in the longitudinal and azimuthal directions of the cladding tube. As a consequence, hydrogen redistributes itself in response to the concentration and temperature gradients present in the sample. The response of the hydrogen in solid solution to temperature gradients is governed by the heat of transport Q* as a function of temperature, so it can be used in the BISON code. A set of experiments was set up to determine the heat of transport (Q*), in which a uniformly hydrided Zircaloy-4 sample is annealed under a fixed temperature gradient at a range of temperatures, and the resulting hydrogen distribution is analyzed to determine Q*. The results are discussed in terms of existing literature.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Equibiaxial flexural strength determination of UO 2 using a ball-on-ring test

To increase nuclear fuel performance and reliability, their mechanical properties require an accurate and statistically relevant assessment. Biaxial flexural strength tests provide an alternative to bend bar techniques for assessing mechanical behavior; namely, the transverse rupture strength (TRS) of ceramic samples. Biaxial test samples require simple geometries and minimal surface preparation, reducing fabrication costs and handling hazards. This study investigated the TRS of polycrystalline UO 2 fuel forms at room temperature using a ball-on-ring test fixture. Here, pellets were fabricated from UO 2 powder using conventional powder processing and sintering techniques. The TRS and Weibull parameters were obtained through Weibull statistics on over 60 UO 2 samples tested under equibiaxial flexure. The larger sample size in this study enabled a more robust Weibull statistical analysis than alternative test methods, which may not capture the stochastic failure of typical ceramics. Furthermore, two different loading ball diameters were employed to assess the impact of contact damage on fracture strength. While Hertzian contact damage was observed with the smaller loading ball, the fracture strength remained unaffected. A fracture analysis of the tested UO 2 samples indicated a mixture of intergranular and transgranular fracture that transitions to transgranular fracture with increasing distance from the fracture origin. The characteristic strength of the combined data sets was determined to be 148 MPa, and the Weibull modulus was determined to be 9.1. The TRS values and Weibull parameters were close to values found in the literature for alternative testing techniques using samples with similar microstructure and density. The findings in this study validate the ball-on-ring method used to obtain the TRS of UO 2 with a sample geometry more representative of nuclear fuels. Additionally, experimental TRS results from this study can be implemented in modeling codes to predict fuel performance, which is critical to fuel burnup extension and advanced nuclear fuel technologies.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

In-situ determination of strain during transient burst testing and the temperature dependence of Zircaloy-4 claddings

Understanding fuel system behavior during postulated loss-of-coolant accidents is pertinent for continued safe and efficient operation of light water reactors, particularly as higher burnups are being pursued and safety margins re-evaluated. Conventional mechanical models for the incumbent Zr alloys typically rely on the assumption that steady-state creep is the dominant fuel cladding response during transient accident conditions. To investigate this assumption, simulated accident burst testing was performed on Zircaloy-4 claddings with balloon behavior measured in-situ. Here, two distinct loading conditions were utilized during burst testing: (1) constant-gas-inventory where pressure was allowed to increase with temperature and (2) constant pressure. In-situ strains and strain rates were measured via 2-dimensional digital image correlation techniques and synchronized with temperature to determine deformation dependencies. The temperature dependence of strain rate was characterized by a two segment Arrhenius relationship, with a distinct transition between the high and low temperature/strain regimes. The average activation energy of the lower temperature/strain regime was 328 ± 25 kJ/mol, in agreement with the ~320 kJ/mol used for conventional LOCA models. However, the higher temperature/strain segment, which encompassed most of ballooning, showed increased activation energies as well as a dependence on whether the burst region was in view. For tests that burst away from the camera view, the average high temperature/strain segment activation energy was 635 ± 150 kJ/mol. For samples where the rupture opening formed in view, the average activation energy was 1015 ± 179 kJ/mol. This observed shift in temperature dependence indicates a transition in deformation mechanism at the end of life, possibly to time independent failure mechanisms, which has not yet been visualized in the literature for Zr alloys. Parameters at the transition points were analyzed to determine thresholds for this change in behavior, which occurred at an average hoop strain of 6.9 ± 2.1 %.

36 MATERIALS SCIENCE↗

Determining reference standard strength for neutron-irradiated reduced activation ferritic/martensitic steel F82H by Bayesian method

The deterministic approach widely adopted in the design of structural components relies on systematically defined design limits using empirically determined safety factors. However, this approach is not always appropriate because structures are subjected to a variety of loads in the practical environment, which may result in excessively conservative design limits. In recent years, a more rigorous probabilistic approach that incorporates material strength distributions has become an important solution. In the probabilistic approach, the probability density functions of material strength properties underpin the design criteria. Here, the objective of this study is to identify the density distribution functions that best describe tensile properties of irradiated F82H to define a reference strength for DEMO design. Due to the limited number of existing data, this study specifically employs a Bayesian prediction method based on Monte Carlo simulations to determine a material reference value with statistical reliability and to investigate its effectiveness. For example, the dependence of tensile properties of 300 °C irradiated materials on irradiation damage and the range predicted by 95% Bayesian estimation was evaluated. As a statistical model for the dose dependence of statistical parameters, the normal distribution exhibited a better fit for 0.2% proof strength and tensile strength, whereas the distribution of total elongation data gave comparable reference values for both the normal and Weibull distribution models. Both models gave comparable criteria for the distribution of total elongation data. The Weibull model also gave better results for uniform elongation. The function best describing the model was a logarithmic law for both 0.2% proof strength and tensile strength, while a power law for both total and uniform elongation, which allowed for more comprehensive data prediction of irradiation data with statistical accuracy for DEMO reactor design.

36 MATERIALS SCIENCE↗

Expanded method for the determination of burnup in nuclear fuels using multiple neodymium isotopes

Established methods for the determination of burnup in nuclear fuels commonly rely on the measurement of 148Nd in the spent fuel in concert with known fission product yields to determine the atom percent of fissions in the fuel. This isotope of neodymium is used for various reasons, including chemical and radioactive stability, ease of measurement, and low rates of formation and destruction due to neutron flux apart from fission. However, careful calculation of effective cumulative fission yields and correction factors for (n,γ) capture reactions allows for additional stable and long-lived isotopes of neodymium to be used to provide additional independent measurements of burnup, reducing statistical uncertainty. This method was developed and successfully applied to measure the burnup of compacts from the Advanced Gas Reactor (AGR) Fuel Development and Qualification Program. The mean burnup measured using 143Nd, 145Nd, 146Nd, 148Nd, and 150Nd was statistically observed to be the same as that measured using 148Nd alone, but the statistical uncertainty in the measurement was reduced by a factor of 2, providing a tighter confidence interval in the final results.

Helmreich, Grant [ORNL] (ORCID:0000000330464394)↗

Melting curve of silicon to 15 GPa determined by two-dimensional angle-dispersive diffraction using a Kawai-type apparatus with X-ray transparent sintered diamond anvils

The melting curve of silicon has been determined up to 15 GPa using a miniaturized Kawai-type apparatus with second-stage cubic anvils made of X-ray transparent sintered diamond. Our results are in good agreement with the melting curve determined by electrical resistivity measurements [V.V. Brazhkin, A.G. Lyapin, S.V. Popova, R.N. Voloshin, Nonequilibrium phase transitions and amorphization in Si, Si/GaAs, Ge, and Ge/GaSb at the decompression of high-pressure phases, Phys. Rev. B 51 (1995) 7549] up to the phase I (diamond structure)-phase II ({beta}-tin structure)-liquid triple point. The triple point of phase XI (orthorhombic, Imma)-phase V (simple hexagonal)-liquid has been constrained to be at 14.4(4) GPa and 1010(5) K. These results demonstrate that the combination of X-ray transparent anvils and monochromatic diffraction with area detectors offers a reliable technique to detect melting at high pressures in the multianvil press.

36 MATERIALS SCIENCE↗

Thermodynamic properties of Ca–Pb electrodes determined by electromotive force measurements

Thermodynamic properties of Ca–Pb alloys are investigated by electromotive force (emf) measurements to determine equilibrium cell potentials and phase properties for their application in energy storage systems such as liquid metal batteries. Using the electrochemical cell Ca(s) | CaF 2 (s) | Ca(in Pb) at 700–1060 K, cell emf is measured for thirteen Ca–Pb alloys at mole fractions, x Ca = 0.06–0.80. At 873 K, the equilibrium potentials of liquid Ca–Pb alloys are 0.57–0.62 V versus Ca and the activity values are as low as a Ca = 6.2 × 10 -8 at x Ca = 0.06. In addition, the emf values as a function of temperature provide partial molar quantities (entropy and enthalpy) as well as phase transitions which are corroborated by determining transition temperatures and phase constituents using differential scanning calorimetry (DSC) and powder X-ray diffraction (XRD). This study establishes the fundamental data necessary for the design of Pb-containing liquid metal electrodes through the integration of electrochemical, thermal, and structural properties of Ca–Pb electrodes.

25 ENERGY STORAGE↗

Determination of Ce 3+ , Co 2+ , Mn 2+ and Fe 2+ diffusion coefficients in Nafion® membrane

Concentration gradient diffusion coefficients for Ce 3+ , Co 2+ , Mn 2+ and Fe 2+ cations are determined in Nafion®211 membranes over a wide range of environmental conditions. Measurements are made using finite-width cation-rich bands introduced to NR211 via a hot-pressing procedure. A robust method of accurate diffusion coefficient determination of the finite-width deposits is developed using a Fick's second law of diffusion solution for one-dimensional systems. The transition metal dications are found to have nearly identical NR211 diffusion coefficients under water saturated conditions over the 22–80 °C range. The powerful chemical mitigant, Ce 3+ , is about one-half as diffusive as the dications under identical conditions. Derived diffusion coefficients for Ce 3+ and Co 2+ are found to be independent of initial cation concentration over the range of 12.5–70 mol% exchange level. The diffusion behavior of Ce 3+ in 80 °C liquid water and saturated water vapor is identical. The diffusion coefficients of Ce 3+ are shown to have a strong dependence on membrane hydration level varying by a factor of more than 30 over the range of 95 to 40% RH. Finally, the implications of these new diffusion findings are applied to a discussion of potential guidelines for the development of highly durable fuel cell systems, which employ mobile metal cations as lifetime-extending redox stabilizers.

08 HYDROGEN↗

A new protocol to accurately determine microtubule lattice seam location

Microtubules (MTs) are cylindrical polymers of αβ-tubulin that display pseudo-helical symmetry due to the presence of a lattice seam of heterologous lateral contacts. The structural similarity between α- and β-tubulin makes it difficult to computationally distinguish them in the noisy cryo-EM images, unless a marker protein for the tubulin dimer, such as kinesin motor domain, is present. We have developed a new data processing protocol that can accurately determine αβ-tubulin register and seam location for MT segments. Our strategy can handle difficult situations, where the marker protein is relatively small or the decoration of marker protein is sparse. Using this new seam-search protocol, combined with movie processing for data from a direct electron detection camera, we were able to determine the cryo-EM structures of MT at 3.5. Å resolution in different functional states. The successful distinction of α- and β-tubulin allowed us to visualize the nucleotide state at the E-site and the configuration of lateral contacts at the seam.

59 BASIC BIOLOGICAL SCIENCES↗

The excited state dynamics of KLa(MoO{sub 4}){sub 2}:Pr{sup 3+}: From a case study to the determination of the energy levels of rare earth impurities relative to the bandgap in oxidising host lattices

The luminescence properties of KLa(MoO{sub 4}){sub 2} (KLM) single crystals doped with Pr{sup 3+} have been measured in the 10-600 K temperature range in order to investigate the mechanisms involved in the radiationless processes. At variance with previously studied scheelite-like molybdates activated with Pr{sup 3+}, no effects attributed to the formation of intervalence charge transfer states have been observed. The model proposed in order to account for this behaviour allows the determination of the energy of the Pr{sup 3+} levels relative to the valence and conduction bands of the host. This model has firstly been confirmed for Tb{sup 3+}-doped KLM, for which suitable experimental data are available, and then extended to the other rare earth ions on the basis of the systematic nature of the lanthanide energy levels properties. The obtained conclusions are finally supported in the light of the comparison with some other representative cases. - Graphical abstract: The study of the excited state dynamics of KLa(MoO{sub 4}){sub 2} single crystals doped with Pr{sup 3+} allows to determine the energies of the levels of the active ion relative to the valence and conduction bands of the host. This model has then been extended to the other rare earth ions on the basis of the systematic nature of the lanthanide energy levels properties.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Synthesis, structure determination, and infrared spectroscopy of (NpO{sub 2}){sub 2}(SO{sub 4})(H{sub 2}O){sub 4}: Prevalence of cation-cation interactions and cationic nets in neptunyl sulfate compounds

The compound (NpO{sub 2}){sub 2}(SO{sub 4})(H{sub 2}O){sub 4} was synthesized by evaporation of a Np{sup 5+} sulfate solution. The crystal structure was determined using single crystal X-ray diffraction and refined to an R{sub 1}=0.0310. (NpO{sub 2}){sub 2}(SO{sub 4})(H{sub 2}O){sub 4} crystallizes in triclinic space group P-1, a=8.1102(7) A, b=8.7506(7) A, c=16.234(1) A, {alpha}=90.242(2){sup o}, {beta}=92.855(2){sup o}, {gamma}=113.067(2){sup o}, V=1058.3(2) A{sup 3}, and Z=2. The structure contains neptunyl pentagonal bipyramids that share vertices through cation-cation interactions to form a sheet or cationic net. The sheet is decorated on each side by vertex sharing with sulfate tetrahedra, and adjacent sheets are linked together through hydrogen bonding. A graphical representation of (NpO{sub 2}){sub 2}(SO{sub 4})(H{sub 2}O){sub 4} was constructed to facilitate the structural comparison to similar Np{sup 5+} compounds. The prevalence of the cationic nets in neptunyl sulfate compounds related to the overall stability of the structure is also discussed. - Graphical abstract: (NpO{sub 2}){sub 2}(SO{sub 4})(H{sub 2}O){sub 4} was synthesized by hydrothermal methods and its structure determined. A graphical representation of the compound was constructed to facilitate the structural comparison to similar Np{sup 5+} compounds and the prevalence of the cationic nets in neptunyl sulfate compounds related to the overall stability of the structure is discussed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Ab initio structure determination and Rietveld refinement of Bi{sub 10}Mo{sub 3}O{sub 24} the member n=3 of the Bi{sub 2n+4}Mo{sub n}O{sub 6(n+1)} series

Bi{sub 2}O{sub 3}-MoO{sub 3} system shows a large panoply of phases depending on Bi/Mo ratio, among them, the low temperature phases of the homologous series Bi{sub 2(n+2)}Mo{sub n}O{sub 6(n+1)} with n=3, 4, 5 and 6. They exhibit, alike most of the phases of this system, strong fluorite sub-network. Nevertheless, a multitechnique approach has been followed in order to solve the crystal structure of the n=3 member, i.e. Bi{sub 10}Mo{sub 3}O{sub 24}. From ab initio indexing X-ray powder pattern cell parameters were derived. It belongs to the monoclinic system, space group C2, with cell parameters: a=23.7282(2) A, b=5.64906(6) A, c=8.68173(9) A, beta=95.8668(7){sup o} with Z=2. The matrix relating this cell with the fluorite one is 4 0 1/0 1 0/-1/2 0 3/2 and a cationic localization was derived. HRTEM allowed the cationic Bi and Mo order to be modified and specified, as well as to build up a full structural ab initio model on the basis of crystal chemistry considerations. Simultaneous Rietveld refinement of multipattern X-ray and neutron powder diffraction data taking advantage of the neutron scattering length for O location have been performed. The goodness of the model was ascertained by low reliability factors, weighted R{sub b}=4.97% and R{sub f}=3.21%. This complex Bi{sub 10}Mo{sub 3}O{sub 24} structure, with 5Bi, 2Mo and 13O in different crystallographic positions of the asymmetric unit, shows good agreement between observed and calculated patterns within the data resolution. Moreover, the determination of this structure sets the basis for the crystallographic characterization of the complete family Bi{sub 2(n+2)}Mo{sub n}O{sub 6(n+1)}, whose guidelines are also evidenced in this paper. - Graphical abstract: This work reports on the ab initio determination of Bi{sub 10}Mo{sub 3}O{sub 24} structure, as well as its refinement by using the Rietveld method, from the combination of X-ray and neutron diffraction powder data. It belongs to the monoclinic system, space group C2, with cell parameters: a=23.7282(2) A, b=5.64906(6) A, c=8.68173(9) A, beta=95.8668(7){sup o} with Z=2.

36 MATERIALS SCIENCE↗