Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “DIFFUSION EFFECT”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,621 records · Page 90

Orientational Dynamics and Dielectric Response of Nanopore Water

We present numerical calculations, simulation results, and analytical considerations for the frequency-dependent dielectric constant of single-file water in narrow nanopores, described by a recently developed dipole lattice model. We find Debye relaxation over all length scales with relaxation times that strongly depend on pore length. This behavior is analyzed in terms of the dynamics of orientational defects leading to simple quantitative expressions for the static dielectric susceptibility and the relaxation time in the limits of short and long pores. Based on these formulas, we suggest how the predicted macroscopic order of nanopore water can be probed via dielectric spectroscopy and explain how the excitation energy, diffusion constant, and effective interaction of the defects that destroy the order can be extracted from such measurements.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Equilibrium solute segregation to matrix- θ' precipitate interfaces in Al-Cu alloys from first principles

Particular combinations of solute atoms segregated to the interface of the Al and θ ' - Al 2 Cu in Al-Cu alloys can help stabilize θ ' precipitates at high temperatures. Stabilization of such precipitates is determined by a combination of thermodynamics (including driving forces for coarsening and transformation and solute segregation tendencies) and kinetic effects (including solute diffusion and interfacial mobility in the presence of interfacial solute segregation). For some alloys such as recent Al-Cu-based alloys, multiple solutes segregate in significant quantities to interfaces, and solute-solute interactions at the interface are important, with multiple types of solutes competing for similar interfacial sites. To treat this situation, we develop and apply a statistical mechanics approach to calculate the temperature-dependent equilibrium solute atoms distribution near the coherent and semicoherent interfaces between the Al matrix and the θ ' - Al 2 Cu precipitates. The developed approach is applied to the investigation of Si, Mn, and Zr segregation at the interface, as particular combinations of these elements affect the thermal stability of the θ ' precipitates. We demonstrate that because Si and Mn atoms segregate on the same semicoherent interface, the presence of Si reduces the concentration of Mn solutes at the interface. Si atoms preferably occupy the first layer of the interface and compete with Mn atoms for one type of particular sites in the layer. Mn atoms preferably occupy the second layer of the semicoherent interface, and the Mn-Mn interaction plays an important role in their distribution. Zr atoms mostly segregate on one of the two nonequivalent sites of the second layer of the coherent interface. Due to symmetry properties of the coherent interface, the calculations show that the segregation Zr of atoms to this interface will likely lead to the formation of L 1 2 ordered Al 3 Zr layer.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Plants mediate soil organic matter decomposition in response to sea level rise

Abstract Tidal marshes have a large capacity for producing and storing organic matter, making their role in the global carbon budget disproportionate to land area. Most of the organic matter stored in these systems is in soils where it contributes 2–5 times more to surface accretion than an equal mass of minerals. Soil organic matter ( SOM ) sequestration is the primary process by which tidal marshes become perched high in the tidal frame, decreasing their vulnerability to accelerated relative sea level rise ( RSLR ). Plant growth responses to RSLR are well understood and represented in century‐scale forecast models of soil surface elevation change. We understand far less about the response of SOM decomposition to accelerated RSLR . Here we quantified the effects of flooding depth and duration on SOM decomposition by exposing planted and unplanted field‐based mesocosms to experimentally manipulated relative sea level over two consecutive growing seasons. SOM decomposition was quantified as CO 2 efflux, with plant‐ and SOM ‐derived CO 2 separated via δ 13 CO 2 . Despite the dominant paradigm that decomposition rates are inversely related to flooding, SOM decomposition in the absence of plants was not sensitive to flooding depth and duration. The presence of plants had a dramatic effect on SOM decomposition, increasing SOM ‐derived CO 2 flux by up to 267% and 125% (in 2012 and 2013, respectively) compared to unplanted controls in the two growing seasons. Furthermore, plant stimulation of SOM decomposition was strongly and positively related to plant biomass and in particular aboveground biomass. We conclude that SOM decomposition rates are not directly driven by relative sea level and its effect on oxygen diffusion through soil, but indirectly by plant responses to relative sea level. If this result applies more generally to tidal wetlands, it has important implications for models of SOM accumulation and surface elevation change in response to accelerated RSLR .

Mueller, Peter↗

Electrical properties of hybrid (ferromagnetic metal)-(layered semiconductor) Ni/p-GaSe structures

Two-barrier Ni/n-Ga2Se3/p-GaSe structures with nanoscale Ni-alloy grains caused by reactions at the 'metal-layered semiconductor' interface were formed after growing Ni layers on the p-GaSe (0001) surface. Current-voltage and capacitance-voltage characteristics of hybrid structures were studied in the temperature range of 220-350 K. The dependence of the impedance spectra on the bias voltage was studied at various temperatures. The frequency dependences of the impedance at high frequencies (f = 10{sup 6} Hz) are discussed in terms of the phenomena of spin injection and extraction in structures with an ultrathin spin-selective Ni/n-Ga{sub 2}Se{sub 3} barrier and the effects of spin diffusion and relaxation in the semiconductor substrate. The room-temperature phenomena of the Coulomb blockade and negative differential capacitance were detected. These phenomena are explained based on an analysis of transport processes in a narrow region near the 'ferromagnetic metal-semiconductor' interface, where nanoscale grains are arranged.

36 MATERIALS SCIENCE↗

Electronic Structures and Magnetic Properties of Transition Metal Doped CsPbI{sub 3} Perovskite Compounds by First-Principles Calculation

Transition metal doped cesium lead halide (CsPbI{sub 3}) perovskite compounds were studied for application in photovoltaic solar cells. Electronic structures, chemical shifts of {sup 207}Pb and {sup 127}I-NMR, vibration modes in infrared and Raman spectra of transition metals (Mn{sup 2+}, Fe{sup 2+} or Cu{sup 2+})-doped CsPbI{sub 3} perovskite compounds were studied by the first-principles calculation using density functional theory. The CsPb(Fe)I{sub 3} perovskite crystals had a slight perturbation of crystal field in the coordination structure. The electron density distribution was delocalized on the 5p orbital of I atom, the 3d orbital of Fe atom and the 6p orbital of Pb atom. The first excited process was based on ligand metal charge transfer from the 5p orbital on I atom to the 3d orbital of Fe atom. The chemical shifts of {sup 127}I-NMR were associated with the electron correlation of electron-nuclear spin interaction and nuclear quadrupole interactions based on electron field graduate. The asymmetric vibrations of Pb–I bonds stretching mode related to electron conductivity with scattering of the carrier diffusion as phonon effectiveness. The slight perturbation of the coordination structure in the CsPb(Fe)I{sub 3} perovskite crystal will improve the photovoltaic and optical properties.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Modeling the Mesoscale Transport of Lithium-Magnetite Electrodes Using Insight from Discharge and Voltage Recovery Experiments

A multi-scale mathematical model, which accounts for mass transport on the crystal and agglomerate length-scales, is used to investigate the electrochemical performance of lithium-magnetite electrochemical cells. Experimental discharge and voltage recovery data are compared to three sets of simulations, which incorporate crystal-only, agglomerate-only, or multi-scale transport effects. Mass transport diffusion coefficients are determined by fitting the simulated voltage recovery times to experimental data. In addition, a further extension of the multi-scale model is proposed which accounts for the impact of agglomerate size distributions on electrochemical performance. The results of the study indicate that, depending on the crystal size, the low utilization of the active material is caused by transport limitations on the agglomerate and/or crystal length-scales. For electrodes composed of small crystals (6 and 8 nm diameters), it is concluded that the transport limitations in the agglomerate are primarily responsible for the long voltage recovery times and low utilization of the active mass. In the electrodes composed of large crystals (32 nm diameter), the slow voltage recovery is attributed to transport limitations on both the agglomerate and crystal length-scales.

25 ENERGY STORAGE↗

PLUMECALC, Version 2.3.x

PLUMECALC is a post processor to random walk particle tracking simulations of subsurface solute transport. PLUMECALC takes results of a single particle tracking run without retention processes and incorporates the effects of matrix diffusion or other retention processes for a user-specified solute source.

Dash, Zora↗

Sun City Progress Report: Policy Effects on Photovoltaic Adoption for City Planning

This progress report documents the Sun City modeling approach, intended to be an analytic tool for city planners. It is midway in development and this report provides the design basis to provide the mathematics for policy considerations applied to PV market acceleration. It assesses the effects on market diffusion for nine commonly used policies: cash incentives, third party financing, group purchase programs, community solar projects, feed-in-tariffs, property assessed clean energy financing, low interest loans, property and sales tax incentives, and streamlined PV permitting processes. Generic forms of all of these policies are modeled in a system dynamics PowerSim Studio TM model using a concept called the photovoltaic favorability (PVF). PVF is equal to the difference between the ratio of conventional electricity costs to levelized electricity costs of a PV system and four barrier ratios. The barriers are present to model inhibiting influences on human decisions and financial limitations. They include down payment costs, month to month payment costs of financing, time to net profit, and time to lower payments. Each barrier term is divided by a tolerance term which represents the potential that consumers of the region can typically invest. PVF is quantified across a range of limited budget financing and cash incentives options which are then consumed from greatest PVF to least PVF. Finding the overall PVF requires iteration on a variation of the Bass diffusion model. This iterative scheme is tied in a feed-back loop to local and national PV learning curves which in turn quantify reductions in the cost of PV for future time steps based on user input learning rates. The modeling has been wrapped into a graphical user interface which will allow city planners to easily compare and demonstrate multiple scenarios. Data for the DOE sponsored Solar America Cities and for Albuquerque, New Mexico has been entered into the model in order to minimize data collection efforts by city planners.

14 SOLAR ENERGY↗

Simulations and Data analysis for the 35 ton Liquid Argon detector as a prototype for the DUNE experiment

The Deep Underground Neutrino Experiment (DUNE) is a next-generation neutrino experiment which will be built at the Sanford Underground Research Facility (SURF), and will receive a wide-band neutrino beam from Fermilab, 1300~km away. At this baseline DUNE will be able to study many of the properties of neutrino mixing, including the neutrino mass hierarchy and the value of the CP-violating complex phase ($\delta_{CP}$). DUNE will utilise Liquid Argon (LAr) Time Projection Chamber (TPC) (LArTPC) technology, and the Far Detector (FD) will consist of four modules, each containing 17.1~kt of LAr with a fiducial mass of around 10~kt. Each of these FD modules represents around an order of magnitude increase in size, when compared to existing LArTPC experiments. \\ The 35 ton detector is the first DUNE prototype for the single (LAr) phase design of the FD. There were two running periods, one from November 2013 to February 2014, and a second from November 2015 to March 2016. During t he second running period, a system of TPCs was installed, and cosmic-ray data were collected. A method of particle identification was developed using simulations, though this was not applied to the data due to the higher than expected noise level. A new method of determining the interaction time of a track, using the effects of longitudinal diffusion, was developed using the cosmic-ray data. A camera system was also installed in the detector for monitoring purposes, and to look for high voltage breakdowns. \\ Simulations concerning the muon-induced background rate to nucleon decay are performed, following the incorporation of the MUon Simulations UNderground (MUSUN) generator into the DUNE software framework. A series of cuts which are based on Monte Carlo truth information is developed, designed to reject simulated background events, whilst preserving simulated signal events in the $n \rightarrow K^{+} + e^{-}$ decay channel. No background events are seen to survive the app lication of these cuts in a sample of 2~$\times$~10$^9$ muon! s, representing 401.6~years of detector live time. This corresponds to an annual background rate of <~0.44~events$\cdot$Mt$^{-1}\cdot$year$^{-1}$ at 90\% confidence, using a fiducial mass of 13.8~kt.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Predictive Large-Eddy Simulation of Supercritical-Pressure Reactive Flows in the Cold Ignition Regime

This report describes a one-year study performed under DOE sponsorship, continuing the investigation of high-pressure turbulent reactive flows. The interest is in the effect of the chemical species distribution in high-pressure turbulent flows in the presence of strong temperature gradients as would occur during reactions in realistic flows. The prime example of such flows are boundary layers in which the wall is at a lower temperature than that of the fluid, as would be the case in Diesel engines. Previous DOE BES work in the program further highlighted the importance of the boundary layer as a configuration for fundamental studies: soot formation in boundary layers is still a problem poorly understood and depends on the availability of particular chemical species at that location, and when boundary layer Large Eddy Simulations results were compared with measurements, the agreement was unfavorable, showing that this important ‘unit’ problem is not well understood. To understand this unit problem, modeling and Direct Numerical Simulations of this unit problem were conducted for the simplest possible multispecies system, that is a binary-species system. The results discovered a new phenomenon, that is, Soret effect induced uphill diffusion. The far-reaching implication is that through an imposed wall/fluid temperature difference it is possible to control the distribution of the species in the boundary layer. Because the results have been documented in one paper published in the refereed literature, and also in conference papers, this final report is in the form of an Executive Summary succinctly describing the results and putting them in perspective with respect to existing information. The refereed and conference papers published are individually listed as Appendices and attached to this report. One manuscript is still in progress and is thus not listed.

74 ATOMIC AND MOLECULAR PHYSICS↗

Report of the Bulk Working Group

The world in general and the USA in particular are facing an oncoming energy shortage. One key mechanism to provide carbon-free energy is nuclear fission. At this point, 20% of the US electrical power grid is supplied by nuclear energy. (Interestingly, it is 50% in Illinois.) European nations such as Sweden (50% nuclear electricity) and France (80% nuclear electricity) are pushing ahead with permanent radioactive waste storage and processing. If nothing else, the USA needs to provide the scientific foundation for improving its nuclear-power generation facilities. One key issue and how the APS could affect it are discussed below. (This discussion of this issue is not meant to be a comprehension argument in support of a facility but merely an example of the sort of science that could be pursued. An exhaustive collection of arguments would take more time and effort.) The modification of various zones inside a nuclear fuel is an important issue. This includes microscopic re-crystallization, stress, fission gas production, He bubble formation and the intermixing, depletion and enrichment of various chemical, daughter and other isotopic species. For example, past studies of the ternary nuclear fuel UPuZr have demonstrated constituent redistribution when irradiated or with thermal treatment. The concentration variations shown above are of significant concern. Driven in part by the thermal gradient within the nuclear fuel, these variations can affect reactor performance and fuel burn-up levels. Similar gradients were observed in samples that were not irradiated but underwent thermal gradient treatments. From measurement such as these, kinetic parameters such as effective inter-diffusion coefficients were derived. The amount of such experimental data is very limited. Interaction of the fuel constituents with cladding and coolant are also important. At present, INL scientists pursue a number of measurements on-site at INL and off-site to address issues such as this. Here, we will propose two key examples of how a new facility at the APS could impact this technological issue.

36 MATERIALS SCIENCE↗

Crystal Growth in Gels from the Mechanisms of Crystal Growth to Control of Polymorphism: New Trends on Theoretical and Experimental Aspects

A gel can be considered to be a two-phase (liquid and solid) system, which lacks flow once it reaches a stationary state. The solid phase is usually a tridimensional polymeric mesh, while the liquid phase is usually found in three forms: contained in great cavities, retained in the capillary pores between micelles, or adsorbed on the surface of a micelle. The influence of the use of gels in crystal growth is diverse and depends on the type of gel being used. A decrease in solubility of any solute in the liquid may occur if the solvent interacts extensively with the polymeric section, hence, the nucleation in gels in these cases apparently occurs at relatively low supersaturations. However, if the pore size is small enough, there is a possibility that a higher supersaturation is needed, due to the compartmentalization of solvents. Finally, this may also represent an effect in the diffusion of substances. This review is divided into three main parts; the first evaluates the theory and practice used for the obtainment of polymorphs. The second part describes the use of gels into crystallogenesis of different substances. The last part is related to the particularities of protein crystal polymorphism, as well as modern trends in gel growth for high-resolution X-ray crystallography.

36 MATERIALS SCIENCE↗

A PDE Model of Breast Tumor Progression in MMTV-PyMT Mice

The evolution of breast tumors greatly depends on the interaction network among different cell types, including immune cells and cancer cells in the tumor. This study takes advantage of newly collected rich spatio-temporal mouse data to develop a data-driven mathematical model of breast tumors that considers cells’ location and key interactions in the tumor. The results show that cancer cells have a minor presence in the area with the most overall immune cells, and the number of activated immune cells in the tumor is depleted over time when there is no influx of immune cells. Interestingly, in the case of the influx of immune cells, the highest concentrations of both T cells and cancer cells are in the boundary of the tumor, as we use the Robin boundary condition to model the influx of immune cells. In other words, the influx of immune cells causes a dominant outward advection for cancer cells. We also investigate the effect of cells’ diffusion and immune cells’ influx rates in the dynamics of cells in the tumor micro-environment. Sensitivity analyses indicate that cancer cells and adipocytes’ diffusion rates are the most sensitive parameters, followed by influx and diffusion rates of cytotoxic T cells, implying that targeting them is a possible treatment strategy for breast cancer.

60 APPLIED LIFE SCIENCES↗

EXTENSION OF THE MURAM RADIATIVE MHD CODE FOR CORONAL SIMULATIONS

We present a new version of the MURaM radiative magnetohydrodynamics (MHD) code that allows for simulations spanning from the upper convection zone into the solar corona. We implement the relevant coronal physics in terms of optically thin radiative loss, field aligned heat conduction, and an equilibrium ionization equation of state. We artificially limit the coronal Alfvén and heat conduction speeds to computationally manageable values using an approximation to semi-relativistic MHD with an artificially reduced speed of light (Boris correction). We present example solutions ranging from quiet to active Sun in order to verify the validity of our approach. We quantify the role of numerical diffusivity for the effective coronal heating. We find that the (numerical) magnetic Prandtl number determines the ratio of resistive to viscous heating and that owing to the very large magnetic Prandtl number of the solar corona, heating is expected to happen predominantly through viscous dissipation. We find that reasonable solutions can be obtained with values of the reduced speed of light just marginally larger than the maximum sound speed. Overall this leads to a fully explicit code that can compute the time evolution of the solar corona in response to photospheric driving using numerical time steps not much smaller than 0.1 s. Numerical simulations of the coronal response to flux emergence covering a time span of a few days are well within reach using this approach.

79 ASTRONOMY AND ASTROPHYSICS↗

Global Simulations of the Inner Regions of Protoplanetary Disks with Comprehensive Disk Microphysics

The gas dynamics of weakly ionized protoplanetary disks (PPDs) are largely governed by the coupling between gas and magnetic fields, described by three non-ideal magnetohydrodynamical (MHD) effects (Ohmic, Hall, ambipolar). Previous local simulations incorporating these processes have revealed that the inner regions of PPDs are largely laminar and accompanied by wind-driven accretion. We conduct 2D axisymmetric, fully global MHD simulations of these regions (∼1–20 au), taking into account all non-ideal MHD effects, with tabulated diffusion coefficients and approximate treatment of external ionization and heating. With the net vertical field aligned with disk rotation, the Hall-shear instability strongly amplifies horizontal magnetic field, making the overall dynamics dependent on initial field configuration. Following disk formation, the disk likely relaxes into an inner zone characterized by asymmetric field configuration across the midplane, which smoothly transitions to a more symmetric outer zone. Angular momentum transport is driven by both MHD winds and laminar Maxwell stress, with both accretion and decretion flows present at different heights, and modestly asymmetric winds from the two disk sides. With anti-aligned field polarity, weakly magnetized disks settle into an asymmetric field configuration with supersonic accretion flow concentrated at one side of the disk surface, and highly asymmetric winds between the two disk sides. In all cases, the wind is magneto-thermal in nature, characterized by a mass loss rate exceeding the accretion rate. More strongly magnetized disks give more symmetric field configuration and flow structures. Deeper far-UV penetration leads to stronger and less stable outflows. Implications for observations and planet formation are also discussed.

79 ASTRONOMY AND ASTROPHYSICS↗