Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Cross Flow”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,621 records · Page 90
All sourcesNASA NTRSDOE OSTI
NASA NTRS1999

A fluid--structure interaction finite element analysis of pulsatile blood flow through a compliant stenotic artery

A new model is used to analyze the fully coupled problem of pulsatile blood flow through a compliant, axisymmetric stenotic artery using the finite element method. The model uses large displacement and large strain theory for the solid, and the full Navier-Stokes equations for the fluid. The effect of increasing area reduction on fluid dynamic and structural stresses is presented. Results show that pressure drop, peak wall shear stress, and maximum principal stress in the lesion all increase dramatically as the area reduction in the stenosis is increased from 51 to 89 percent. Further reductions in stenosis cross-sectional area, however, produce relatively little additional change in these parameters due to a concomitant reduction in flow rate caused by the losses in the constriction. Inner wall hoop stretch amplitude just distal to the stenosis also increases with increasing stenosis severity, as downstream pressures are reduced to a physiological minimum. The contraction of the artery distal to the stenosis generates a significant compressive stress on the downstream shoulder of the lesion. Dynamic narrowing of the stenosis is also seen, further augmenting area constriction at times of peak flow. Pressure drop results are found to compare well to an experimentally based theoretical curve, despite the assumption of laminar flow.

Non-NASA Center↗
NASA NTRS1980

A three-dimensional turbulent compressible subsonic duct flow analysis for use with constructed coordinate systems

An approximate analysis, applicable to nonorthogonal coordinate systems having a curved centerline and planar transverse coordinate surfaces normal to the centerline, is presented for computation of three-dimensional subsonic flow in straight and curved diffusers. The formulation is intended to facilitate the use of constructed coordinates in circumstances where it is difficult to maintain smooth behavior in higher derivatives; the use of local Cartesian variables and fluxes leads to governing equations which require only first derivatives of the coordinate transformation. The analysis is applied to a particular family of duct and diffuser geometries having curved centerlines and superelliptic cross sections. Qualitative agreement with experimental measurements is observed with regard to streamwise vortices and distortion of the primary flow.

Levy, R.↗
DOE OSTI2025

Divertor characterization and access to dissipative divertor conditions in negative triangularity discharges in DIII-D

Reduced radial transport, short midplane-to-target parallel connection lengths, and a strong effect of cross-field drifts were responsible for the high densities required for detachment in strong negative triangularity (NT) configurations in DIII-D. Dissipative divertor conditions were achieved in NT discharges at different triangularity, injected power, plasma current, and toroidal field direction. Differences between negative and positive triangularity (PT) discharges are analyzed in this paper to understand the requirements for access to detached divertor conditions: power balance, geometry, radial transport and effect of cross-field particle drifts. Parametric dependencies of access to detachment on plasma current and power flowing into the scrape-off layer remained similar in negative and PT and impurity seeding was observed to reduce the density needed to detach by up to 30% at the expense of core impurity dilution. The impact of triangularity on core-edge integration was tested varying bottom triangularity at fixed top triangularity. The high density needed to detach was not intrinsic to the NT edge as shapes with positive lower triangularity and negative upper triangularity were able to detach at lower upstream densities while maintaining an ELM-free NT edge. Confinement degradation at deeper detachment levels was however observed in all NT shapes, often associated with radiation instabilities.

detachment↗
DOE OSTI2020

Absolute dissociative electron attachment cross-section measurement of difluoromethane

Dissociative electron attachment (DEA) to difluoromethane (CH 2 F 2 ) has been studied in the electron energy range of 0 to 16 eV. Two resonant states around 2 and 11.4 eV leading to three different fragment anions (F - , CHF - , and F 2 - ) are observed. Ion-yield curves of the negative ions help us to locate the position of the resonant states. In the ion-yield curve of F - ions, one small hump near 9.8 eV followed by a peak around 15.2 eV is also observed. Absolute DEA cross sections of the F - ion is measured by using the well-known relative flow technique. Dissociation channels associated with each resonant states are identified by density-functional theory (DFT) calculations of the threshold energies. The theory matches quite well within the experimental uncertainty.

74 ATOMIC AND MOLECULAR PHYSICS↗
NASA NTRS1973

Surface configuration as an explanation for lithology-related cross-polarized radar image anomalies

One problem that has persisted since the development of multipolarized radar is the cause or causes of differential depolarization which is expressed as tonal reversals between like- and cross-polarized images of certain outcrops. Rocks producing anomalously low returns on the cross-polarized image could be classed into three general types: (1) certain geologically recent lava flows (late Pleistocene and Holocene), (2) some tertiary volcanics and (3) certain massive sandstones. Differential depolarization has been produced by volcanic rocks of various compositions including rhyolite, rhyodacite, dacite, andesite, and basalt. This has led to the conclusion that differential depolarization is not directly caused by any compositional factor. However, the study of aerial photos and subsequent field observation have led to the conclusion that the weathering and other surface characteristics of the outcrops are responsible for their appearance on multipolarized imagery.

Mccauley, J. R.↗
NASA NTRS1975

Numerical simulation of turbulent jet noise, part 1

Flow characteristics, such as quadrupole moments are examined in order to study generation of aerodynamic noise. The mean flow quantities are set in accordance with experimental data and the incompressible Navier-Stokes are solved numerically. Isolated downstream sections of a turbulent jet are modelled separately with the mean flow characteristics held constant in time. The flows are allowed to evolve until the fluctuating velocity components reach a statistically steady state. Cross section contour plots of the velocity components and the quadrupole moments at three different downstream positions are presented.

Metcalfe, R. W.↗
NASA NTRS1975

The anatomy of floating shock fitting

The floating shock fitting technique is examined. Second-order difference formulas are developed for the computation of discontinuities. A procedure is developed to compute mesh points that are crossed by discontinuities. The technique is applied to the calculation of internal two-dimensional flows with arbitrary number of shock waves and contact surfaces. A new procedure, based on the coalescence of characteristics, is developed to detect the formation of shock waves. Results are presented to validate and demonstrate the versatility of the technique.

Salas, M. D.↗
NASA NTRS1980

Higher order mode propagation in nonuniform circular ducts

Higher order mode propagation in a nonuniform circular duct without mean flow was investigated. An approximate wave equation is derived on the assumptions that the duct cross section varies slowly and that mode conversion is negligible. Exact closed form solutions are obtained for a particular class of converging-diverging circular duct which referred to as 'circular cosh duct.' Numerical results are presented in terms of the transmission loss for the various duct shapes and frequencies. The results are applicable to multimodal propagation, single mode propagation, and sound radiation from certain types of contoured inlet ducts, or of sound propagation in a converging-diverging duct of somewhat different shape from a cosh duct.

Cho, Y. C.↗
NASA NTRS1986

Atmospheric boundary layer modification in the marginal ice zone

A case study of the Andreas et al. (1984) data on atmospheric boundary layer modification in the marginal ice zone is made. The model is a two-dimensional, multilevel, linear model with turbulence, lateral and vertical advection, and radiation. Good agreement between observed and modeled temperature cross sections is obtained. In contrast to the hypothesis of Andreas et al., the air flow is found to be stable to secondary circulations. Adiabatic lifting and, at long fetches, cloud top longwave cooling, not an air-to-surface heat flux, dominate the cooling of the boundary layer. The accumulation with fetch over the ice of changes in the surface wind field is shown to have a large effect on estimates of the surface wind stress. It is speculated that the Andreas et al. estimates of the drag coefficient over the compact sea ice are too high.

Bennett, Theodore J., Jr.↗
NASA NTRS1987

Multiple dipole eddies in the Alaska Coastal Current detected with Landsat thematic mapper data

Seventeen dipole eddies, including five large, well-formed ones, three second-generation eddies, and two double eddies, were observed in the Alaska Coastal Current near Kayak Island in one single scene of the Landsat thematic mapper (TM) on April 22, l985. The digital Landsat TM satellite data were computer analyzed to extract details in the near coastal circulation in the northern Gulf of Alaska. Enhancement techniques were applied to the visible and thermal IR bands. The features are evident only in the visible bands because of the ability of these bands to detect the distribution of sediments in the near surface. These eddies did not have a significant thermal signature.The sources of these sediments are the glacial streams found throughout the Gulf of Alaska coast. Eddies of this configuration and frequency have never been observed here previously. However, the oceanographic and meteorological conditions are typical for this time of year. These eddies should be important to the cross-shelf mixing processes in the Alaska Coastal Current and are an indicator that the flow here can be unstable at certain times of the year.

Ahlnas, Kristina↗
NASA NTRS1991

Electron attachment line shapes, cross sections, and rate constants at ultralow energies in CF3SO3H, (CF3SO2)2O, and CF3I

Electron attachment cross sections are reported in the energy range 0-160 meV, and at resolutions of 6.0-6.5 meV (FWHM) for the molecules CF3SO3H (triflic acid), (CF3SO2)2O (triflic anhydride), and CF3I (methyl iodide). Use is made of the Kr photoionization method. Attachment line shapes are deconvoluted from the spectral slit (electron energy) function, and are converted to cross sections by normalization to thermal attachment rate constants at 300 K. Rate constants as a function of mean electron energy are calculated from the cross sections using a Maxwellian electron energy distribution function. Present data are compared with flowing-afterglow, Langmuir-probe results in triflic acid and anhydride, and with high-Rydberg ionization results in CF3I.

Alajajian, S. H.↗
NASA NTRS1932

The Effect of Clearance Distribution on the Performance of a Compression-ignition Engine with a Precombustion Chamber

The clearance distribution in a precombustion chamber cylinder head was varied so that for a constant compression ratio of 13.5 the spherical auxiliary chambers contained 20, 35, 50, and 70 per cent of the total clearance volume. Each chamber was connected to the cylinder by a single circular passage, flared at both ends, and of a cross-sectional area proportional to the chamber volume, thereby giving the same calculated air-flow velocity through each passage. Results of engine-performance tests are presented with variations of power, fuel consumption, explosion pressure, rate of pressure rise, ignition lag, heat loss to the cooling water, and motoring characteristics. For good performance the minimum auxiliary chamber volume, with the cylinder head design used, was 35 per cent of the total clearance volume; for larger volumes the performance improves but slightly. With the auxiliary chamber that contained 35 percent of the clearance volume there were obtained the lowest explosion pressures, medium rates of pressure rise, and slightly less than the maximum power. For all clearance distributions an increase in engine speed decreased the ignition lag in seconds and increased the rate of pressure rise.

Moore, C. S.↗
NASA NTRS1995

Fuzzy inference enhanced information recovery from digital PIV using cross-correlation combined with particle tracking

Particle Image Velocimetry provides a means of measuring the instantaneous 2-component velocity field across a planar region of a seeded flowfield. In this work only two camera, single exposure images are considered where both cameras have the same view of the illumination plane. Two competing techniques which yield unambiguous velocity vector direction information have been widely used for reducing the single exposure, multiple image data: cross-correlation and particle tracking. Correlation techniques yield averaged velocity estimates over subregions of the flow, whereas particle tracking techniques give individual particle velocity estimates. The correlation technique requires identification of the correlation peak on the correlation plane corresponding to the average displacement of particles across the subregion. Noise on the images and particle dropout contribute to spurious peaks on the correlation plane, leading to misidentification of the true correlation peak. The subsequent velocity vector maps contain spurious vectors where the displacement peaks have been improperly identified. Typically these spurious vectors are replaced by a weighted average of the neighboring vectors, thereby decreasing the independence of the measurements. In this work fuzzy logic techniques are used to determine the true correlation displacement peak even when it is not the maximum peak on the correlation plane, hence maximizing the information recovery from the correlation operation, maintaining the number of independent measurements and minimizing the number of spurious velocity vectors. Correlation peaks are correctly identified in both high and low seed density cases. The correlation velocity vector map can then be used as a guide for the particle tracking operation. Again fuzzy logic techniques are used, this time to identify the correct particle image pairings between exposures to determine particle displacements, and thus velocity. The advantage of this technique is the improved spatial resolution which is available from the particle tracking operation. Particle tracking alone may not be possible in the high seed density images typically required for achieving good results from the correlation technique. This two staged approach offers a velocimetric technique capable of measuring particle velocities with high spatial resolution over a broad range of seeding densities.

Wernet, Mark P.↗
NASA NTRS1995

Schlieren System and method for moving objects

A system and method are provided for recording density changes in a flow field surrounding a moving object. A mask having an aperture for regulating the passage of images is placed in front of an image recording medium. An optical system is placed in front of the mask. A transition having a light field-of-view and a dark field-of-view is located beyond the test object. The optical system focuses an image of the transition at the mask such that the aperture causes a band of light to be defined on the image recording medium. The optical system further focuses an image of the object through the aperture of the mask so that the image of the object appears on the image recording medium. Relative motion is minimized between the mask and the transition. Relative motion is also minimized between the image recording medium and the image of the object. In this way, the image of the object and density changes in a flow field surrounding the object are recorded on the image recording medium when the object crosses the transition in front of the optical system.

Weinstein, Leonard M.↗
NASA NTRS1994

Spatial and temporal relations between coronae and extensional belts, northern Lada Terra, Venus

Preliminary studies of the distribution of coronae and volcanic rises on Venus show that many of these features tend to cluster along zones of rifting and extension. The plains north of Lada Terra are crossed by two such extensional belts. Each belt is composed of grabens, ridges, faults, volcanic flows, coronae and coronalike features. The longer and more prominent belt is the NW trending Alpha-Lada extensional belt, which is over 6000 km long and 50-200 km wide, and includes the coronae Eve, Tamfana, Carpo, Selu, Derceto, Otygen, and an unnamed corona south of Otygen. The second belt is the NNE trending Derceto-Quetzalpetlatl extensional belt, which is about 2000 km long and in places over 300 km wide, and includes the coronae Sarpanitum, Eithinoha, and Quetzalpetlatl. The two belts intersect at the 1600 x 600 km wide Derceto volcanic plateau. It is apparent that deformation along the two belts overlapped in time, though deformation along the Alpha-Lada extensional belt probably continued after the deformation along the Derceto-Quetzalpetlatl extensional belt terminated. In certain areas, volcanism originated in grabens within the extensional belts, whereas in other areas, such as in Eve, Selu, Derceto, and Quetzalpetlatl, volcanism originated in the coronae and flowed into the lower parts of the extensional belts. Regional extension has affected the evolution of all the coronae at some stage of their development. Regional deformation occurred before the initiation of Derceto and Eithinoha of their development. Regional deformation occurred before the initiation of Derceto and Eithinoha and after the initiation of Carpo, Tamfana, Otygen, and Sarpanitum. It is thus unlikely that coronae formation along the belts is solely a consequence of the regional extension, and it is also unlikely that regional extension has been caused solely by the coronae. No corona along the belts was formed subsequent to the cessation of the regional extension. We therefore suggest that the regional extension and the coronae are interrelated. Some of the coronae may have determined the location of the surface expression of the regional extension, whereas the locations of other coronae may have been influenced by the concentration of regional extensional stresses.

Baer, Gidon↗
NASA NTRS1996

Calibration of Hot Wire Anemometers. (Latest Citations from the Aerospace Database)

The bibliography contains citations concerning calibration methods and measurement correction schemes for hot wire anemometers. Coverage includes static and dynamic calibration of sensors having single, multiple, cross, and ring wire configurations. Correction methods to account for yaw angle, low-velocity flow, microgravity, wall proximity, and highly fluctuating turbulence, velocity, or temperature are covered. Correction methods are also referenced for installations having multiple sensors. Hot film and laser anemometers, and the use of anemometers in specific industrial and aerospace applications are extensively covered in separate biblographies. (Contains 50-250 citations and includes a subject term index and title list.)

HOT WIRE ANEMOMETERS↗
NASA NTRS1997

Rotational Energy Transfer of N2 Gas Determined Using a New Ab Initio Potential Energy Surface

Rotational energy transfer between two N2 molecules is a fundamental process of some importance. Exchange is expected to play a role, but its importance is somewhat uncertain. Rotational energy transfer cross sections of N2 also have applications in many other fields including modeling of aerodynamic flows, laser operations, and linewidth analysis in nonintrusive laser diagnostics. A number of N2-N2 rigid rotor potential energy surface (PES) has been reported in the literature.

Huo, Winifred M.↗