SEARCH · Engineering Papers

Results for “Computing”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,621 records · Page 90

All sources NASA NTRS DOE OSTI

NASA NTRS1986

Computational design of natural laminar flow wings for transonic transport application

Two research programs are described which directly relate to the application of natural laminar flow (NLF) technology to transonic transport-type wind planforms. Each involved using state-of-the-art computational methods to design three-dimensional wing contours which generate significant runs of favorable pressure gradients. The first program supported the Variable Sweep Transition Flight Experiment and involves design of a full-span glove which extends from the leading edge to the spoiler hinge line on the upper surface of an F-14 outer wing panel. Boundary-layer and static-pressure data will be measured on this design during the supporting wind-tunnel and flight tests. These data will then be analyzed and used to infer the relationship between crossflow and Tollmein-Schlichting disturbances on laminar boundary-layer transition. A wing was designed computationally for a corporate transport aircraft in the second program. The resulting wing design generated favorable pressure gradients from the leading edge aft to the mid-chord on both upper and lower surfaces at the cruise design point. Detailed descriptions of the computational design approach are presented along with the various constraints imposed on each of the designs. Wing surface pressure distributions, which support the design objective and were derived from transonic three-dimensional analyses codes, are also presented. Current status of each of the research programs is included in the summary.

Waggoner, Edgar G.↗

NASA NTRS1987

Enhancement of computer system for applications software branch

Presented is a compilation of the history of a two-month project concerned with a survey, evaluation, and specification of a new computer system for the Applications Software Branch of the Software and Data Management Division of Information and Electronic Systems Laboratory of Marshall Space Flight Center, NASA. Information gathering consisted of discussions and surveys of branch activities, evaluation of computer manufacturer literature, and presentations by vendors. Information gathering was followed by evaluation of their systems. The criteria of the latter were: the (tentative) architecture selected for the new system, type of network architecture supported, software tools, and to some extent the price. The information received from the vendors, as well as additional research, lead to detailed design of a suitable system. This design included considerations of hardware and software environments as well as personnel issues such as training. Design of the system culminated in a recommendation for a new computing system for the Branch.

Bykat, Alex↗

NASA NTRS1987

Implementing clips on a parallel computer

The C language integrated production system (CLIPS) is a forward chaining rule based language to provide training and delivery for expert systems. Conceptually, rule based languages have great potential for benefiting from the inherent parallelism of the algorithms that they employ. During each cycle of execution, a knowledge base of information is compared against a set of rules to determine if any rules are applicable. Parallelism also can be employed for use with multiple cooperating expert systems. To investigate the potential benefits of using a parallel computer to speed up the comparison of facts to rules in expert systems, a parallel version of CLIPS was developed for the FLEX/32, a large grain parallel computer. The FLEX implementation takes a macroscopic approach in achieving parallelism by splitting whole sets of rules among several processors rather than by splitting the components of an individual rule among processors. The parallel CLIPS prototype demonstrates the potential advantages of integrating expert system tools with parallel computers.

Riley, Gary↗

NASA NTRS1988

An efficient sparse matrix multiplication scheme for the CYBER 205 computer

This paper describes the development of an efficient algorithm for computing the product of a matrix and vector on a CYBER 205 vector computer. The desire to provide software which allows the user to choose between the often conflicting goals of minimizing central processing unit (CPU) time or storage requirements has led to a diagonal-based algorithm in which one of four types of storage is selected for each diagonal. The candidate storage types employed were chosen to be efficient on the CYBER 205 for diagonals which have nonzero structure which is dense, moderately sparse, very sparse and short, or very sparse and long; however, for many densities, no diagonal type is most efficient with respect to both resource requirements, and a trade-off must be made. For each diagonal, an initialization subroutine estimates the CPU time and storage required for each storage type based on results from previously performed numerical experimentation. These requirements are adjusted by weights provided by the user which reflect the relative importance the user places on the two resources. The adjusted resource requirements are then compared to select the most efficient storage and computational scheme.

Lambiotte, Jules J., Jr.↗

NASA NTRS1988

Distributed computation of graphics primitives on a transputer network

A method is developed for distributing the computation of graphics primitives on a parallel processing network. Off-the-shelf transputer boards are used to perform the graphics transformations and scan-conversion tasks that would normally be assigned to a single transputer based display processor. Each node in the network performs a single graphics primitive computation. Frequently requested tasks can be duplicated on several nodes. The results indicate that the current distribution of commands on the graphics network shows a performance degradation when compared to the graphics display board alone. A change to more computation per node for every communication (perform more complex tasks on each node) may cause the desired increase in throughput.

Ellis, Graham K.↗

NASA NTRS1988

Computational structural mechanics for engine structures

The computational structural mechanics (CSM) program at Lewis encompasses the formulation and solution of structural mechanics problems and the development of integrated software systems to computationally simulate the performance, durability, and life of engine structures. It is structured to supplement, complement, and, whenever possible, replace costly experimental efforts. Specific objectives are to investigate unique advantages of parallel and multiprocessing for reformulating and solving structural mechanics and formulating and solving multidisciplinary mechanics and to develop integrated structural system computational simulators for predicting structural performance, evaluating newly developed methods, and identifying and prioritizing improved or missing methods.

Chamis, Christos C.↗

NASA NTRS1986

Computational wing design studies relating to natural laminar flow

Two research studies are described which directly relate to the application of natural laminar flow (NLF) technology to transonic transport-type wing planforms. Each involved using state-of-the-art computational methods to design three-dimensional wing contours which generate significant runs of favorable pressure gradients. The first study supported the Variable Sweep Transition Flight Experiment and involves design of a full-span glove which extends from the leading edge to the spoiler hinge line on the upper surface of an F-14 outer wing panel. A wing was designed computationally for a corporate transport aircraft in the second study. The resulting wing design generated favorable pressure gradients from the leading edge aft to the mid-chord on both upper and lower surfaces at the cruise design point. Detailed descriptions of the computational design approach are presented along with the various constraints imposed on each of the designs.

Waggoner, Edgar G.↗

NASA NTRS1988

A decade of computer simulations for space shuttle aerodynamics

Ten years ago computer simulations of the flow field around the Space Shuttle Orbiter were limited to inviscid calculations for the windward side of the forebody and viscous calculations for selected 2-D problems. Advances in computer hardware and numerical methods during the past ten years made it possible to calculate viscous flow over the complete orbiter configuration at angle of attack. The equations solved are the Reynolds-averaged, Navier-Stokes equation, simplified by either the thin-layer or parabolized approximation. An algebraic eddy viscosity model is used for turbulent flow. The free stream is assumed to be a perfect gas for wind tunnel conditions and a real gas in thermodynamic equilibrium for flight conditions. Four examples of recent computer simulations are presented. Flow field results include oil flow patterns on the surface and Mach number contours, isobars, and cross-flow velocity vectors in the shock layer.

Inouye, Mamoru↗

NASA NTRS1988

Application of advanced grid generation techniques for flow field computations about complex configurations

In the computation of flowfields about complex configurations, it is very difficult to construct a boundary-fitted coordinate system. An alternative approach is to use several grids at once, each of which is generated independently. This procedure is called the multiple grids or zonal grids approach; its applications are investigated. The method conservative providing conservation of fluxes at grid interfaces. The Euler equations are solved numerically on such grids for various configurations. The numerical scheme used is the finite-volume technique with a three-stage Runge-Kutta time integration. The code is vectorized and programmed to run on the CDC VPS-32 computer. Steady state solutions of the Euler equations are presented and discussed. The solutions include: low speed flow over a sphere, high speed flow over a slender body, supersonic flow through a duct, and supersonic internal/external flow interaction for an aircraft configuration at various angles of attack. The results demonstrate that the multiple grids approach along with the conservative interfacing is capable of computing the flows about the complex configurations where the use of a single grid system is not possible.

Kathong, Monchai↗

NASA NTRS1988

Euler equation computations for the flow over a hovering helicopter rotor

A numerical solution technique is developed for computing the flow field around an isolated helicopter rotor in hover. The flow is governed by the compressible Euler equations which are integrated using a finite volume approach. The Euler equations are coupled to a free wake model of the rotary wing vortical wake. This wake model is incorporated into the finite volume solver using a prescribed flow, or perturbation, technique which eliminates the numerical diffusion of vorticity due to the artificial viscosity of the scheme. The work is divided into three major parts: (1) comparisons of Euler solutions to experimental data for the flow around isolated wings show good agreement with the surface pressures, but poor agreement with the vortical wake structure; (2) the perturbation method is developed and used to compute the interaction of a streamwise vortex with a semispan wing. The rapid diffusion of the vortex when only the basic Euler solver is used is illustrated, and excellent agreement with experimental section lift coefficients is demonstrated when using the perturbation approach; and (3) the free wake solution technique is described and the coupling of the wake to the Euler solver for an isolated rotor is presented. Comparisons with experimental blade load data for several cases show good agreement, with discrepancies largely attributable to the neglect of viscous effects. The computed wake geometries agree less well with experiment, the primary difference being that too rapid a wake contraction is predicted for all the cases.

Roberts, Thomas Wesley↗

NASA NTRS1986

An experiment for determining the Euler load by direct computation

A direct algorithm is presented for computing the Euler load of a column from experimental data. The method is based on exact inextensional theory for imperfect columns, which predicts two distinct deflected shapes at loads near the Euler load. The bending stiffness of the column appears in the expression for the Euler load along with the column length, therefore the experimental data allows a direct computation of bending stiffness. Experiments on graphite-epoxy columns of rectangular cross-section are reported in the paper. The bending stiffness of each composite column computed from experiment is compared with predictions from laminated plate theory.

Thurston, Gaylen A.↗

NASA NTRS1987

Computation and analysis of a cylinder wake flow

The Karman vortex wake of a circular cylinder at low Reynolds number was computed by a time-accurate, two-dimensional compressible Navier-Stokes equation solver which uses the MacCormack predictor-corrector finite-difference scheme and a nonreflecting boundary condition on the outer flow boundary. The results from a large number of time steps were analyzed using Fast Fourier Transform techniques to identify the important frequency components for comparison with published experimental data. A strong low-frequency component was found below the vortex shedding frequency and not harmonically related to it. The experimentally discovered low-frequency fluctuations in the cylinder wake are considered possibly to be precursors to transition from laminar to turbulent flow conditions. The present finding of similar frequencies in a computed wake tends to confirm their existence as a real wake phenomenon. This computational work provides a complementary means to experimental investigations of wake phenomena.

Townsend, J. C.↗

NASA NTRS1987

Computation of vortex sheet roll-up in the Trefftz plane

Two vortex-sheet evolution problems arising in aerodynamics are studied numerically. The approach is based on desingularizing the Cauchy principal value integral which defines the sheet's velocity. Numerical evidence is presented which indicates that the approach converges with respect to refinement in the mesh-size and the smoothing parameter. For elliptic loading, the computed roll-up is in good agreement with Kaden's asymptoic spiral at early times. Some aspects of the solution's instability to short-wavelength perturbations, for a small value of the smoothing parameter, are inferred by comparing calculations performed with different levels of computer round-off error. The tip vortices' deformation, due to their mutual interaction, is shown in a long-time calculation. Computations for a simulated fuselage-flap configuration show a complicated process of roll-up, deformation and interaction involving the tip vortex and the inboard neighboring vortices.

Krasny, Robert↗

NASA NTRS1987

An efficient method to compute spurious end point contributions in PO solutions

A method is given to compute the spurious endpoint contributions in the physical optics solution for electromagnetic scattering from conducting bodies. The method is applicable to general three-dimensional structures. The only information required to use the method is the radius of curvature of the body at the shadow boundary. Thus, the method is very efficient for numerical computations. As an illustration, the method is applied to several bodies of revolution to compute the endpoint contributions for backscattering in the case of axial incidence. It is shown that in high-frequency situations, the endpoint contributions obtained using the method are equal to the true endpoint contributions.

Gupta, Inder J.↗

NASA NTRS1988

Three parallel computation methods for structural vibration analysis

The Lanczos (1950), multisectioning, and subspace iteration sequential methods for vibration analysis presently used as bases for three parallel algorithms are noted, in the aftermath of three example problems, to maintain reasonable accuracy in the computation of vibration frequencies. Significant computation time reductions are obtained as the number of processors increases. An analysis is made of the performance of each method, in order to characterize relative strengths and weaknesses as well as to identify those parameters that most strongly affect computation efficiency.

Storaasli, Olaf↗

NASA NTRS1988

Effects of computing time delay on real-time control systems

The reliability of a real-time digital control system depends not only on the reliability of the hardware and software used, but also on the speed in executing control algorithms. The latter is due to the negative effects of computing time delay on control system performance. For a given sampling interval, the effects of computing time delay are classified into the delay problem and the loss problem. Analysis of these two problems is presented as a means of evaluating real-time control systems. As an example, both the self-tuning predicted (STP) control and Proportional-Integral-Derivative (PID) control are applied to the problem of tracking robot trajectories, and their respective effects of computing time delay on control performance are comparatively evaluated. For this example, the STP (PID) controller is shown to outperform the PID (STP) controller in coping with the delay (loss) problem.

Shin, Kang G.↗

NASA NTRS1987

Computational aerothermodynamics

Computational aerothermodynamics (CAT) has in the past contributed to the understanding of real-gas flows encountered by hypervelocity reentry vehicles. With advances in computational fluid dynamics, in the modeling of high temperature phenomena, and in computer capability, CAT is an enabling technology for the design of many future space vehicles. An overview of the current capabilities of CAT is provided by describing available methods and their applications. Technical challenges that need to be met are discussed.

Deiwert, George S.↗

NASA NTRS1988

A new hybrid transfinite element computational methodology for applicability to conduction/convection/radiation heat transfer

This paper describes new and recent advances in the development of a hybrid transfinite element computational methodology for applicability to conduction/convection/radiation heat transfer problems. The transfinite element methodology, while retaining the modeling versatility of contemporary finite element formulations, is based on application of transform techniques in conjunction with classical Galerkin schemes and is a hybrid approach. The purpose of this paper is to provide a viable hybrid computational methodology for applicability to general transient thermal analysis. Highlights and features of the methodology are described and developed via generalized formulations and applications to several test problems. The proposed transfinite element methodology successfully provides a viable computational approach and numerical test problems validate the proposed developments for conduction/convection/radiation thermal analysis.

Tamma, Kumar K.↗