Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Commanding”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,621 records · Page 90
All sourcesNASA NTRSDOE OSTI
NASA NTRS1995

Software For Uniaxial Mechanical Testing Of Materials

Materials Testing Software system designed to simplify and automate both routine and not-so-routine materials-testing tasks encountered in laboratory. Supports plan/test/analyze cycle through collection of programs, each optimized to specific task. Gives precise control over nature of command waveforms and acquisition of data, including dynamically variable waveform types, sets of data-acquisition channels, and data rates. Differing command and data-acquisition rates required for exploring creep and fatigue material behavior easily accommodated. Written in Modula-2.

Mcgaw, M. A.↗
NASA NTRS1991

Apollo 14 Mission to Fra Mauro

The 1971 Apollo 14 Mission to Fra Mauro, a lunar highland area, is highlighted in this video. The mission's primary goal was the collection of lunar rocks and soil samples and lunar exploration. The soil and rock sampling was for the geochronological determination of the Moon's evolution and its comparison with that of Earth. A remote data collection station was assembled on the Moon and left for continuous data collection and surface monitoring experiments. The Apollo 14 astronauts were Alan B. Shepard, Edgar D. Mitchell, and Stuart A. Rossa. Astronauts Shepard and Mitchell landed on the Moon (February 5, 1971) and performed the sampling, the EVA, and deployment of the lunar experiments. There is film-footage of the lunar surface, of the command module's approach to both the Moon and the Earth, Moon and Earth spacecraft launching and landing, in-orbit command- and lunar-module docking, and of Mission Control.

Beasley, Brian D.↗
NASA NTRS1995

Piloted simulation tests of propulsion control as backup to loss of primary flight controls for a mid-size jet transport

Failures of aircraft primary flight-control systems to aircraft during flight have led to catastrophic accidents with subsequent loss of lives (e.g. , DC-1O crash, B-747 crash, C-5 crash, B-52 crash, and others). Dryden Flight Research Center (DFRC) investigated the use of engine thrust for emergency flight control of several airplanes, including the B-720, Lear 24, F-15, C-402, and B-747. A series of three piloted simulation tests have been conducted at Ames Research Center to investigate propulsion control for safely landing a medium size jet transport which has experienced a total primary flight-control failure. The first series of tests was completed in July 1992 and defined the best interface for the pilot commands to drive the engines. The second series of tests was completed in August 1994 and investigated propulsion controlled aircraft (PCA) display requirements and various command modes. The third series of tests was completed in May 1995 and investigated PCA full-flight envelope capabilities. This report describes the concept of a PCA, discusses pilot controls, displays, and procedures; and presents the results of piloted simulation evaluations of the concept by a cross-section of air transport pilots.

Bull, John↗
NASA NTRS1995

V/STOL systems research aircraft: A tool for cockpit integration

The next generation ASTOVL aircraft will have a complicated propulsion system. The configuration choices include Direct Lift, Lift-Fan and Lift + Lift/Cruise but the aircraft must also have supersonic performance and low-observable characteristics. The propulsion system may have features such as flow blockers, vectoring nozzles and flow transfer schemes. The flight control system will necessarily fully integrate the aerodynamic surfaces and the propulsive elements. With a fully integrated, fly-by-wire flight/propulsion control system, the options for cockpit integration are interesting and varied. It is possible to de-couple longitudinal and vertical responses allowing the pilot to close the loop on flightpath and flightpath acceleration directly. In the hover, the pilot can control the translational rate directly without having to stabilize the inner rate and attitude loops. The benefit of this approach, reduced workload and increased precision, has previously been demonstrated through several motion-based simulations. In order to prove the results in flight, the V/STOL System Research Aircraft (VSRA) was developed at the NASA Ames Research Center. The VSRA is the YAV-8B Prototype modified with a research flight control system using a series-parallel servo configuration in all the longitudinal degrees of freedom (including thrust and thrust vector angle) to provide an integrated flight and propulsion control system in a limited envelope. Development of the system has been completed and flight evaluations of the response types have been performed. In this paper we will discuss the development of the VSRA, the evolution of the flightpath command and translational rate command response types and the Guest Pilot evaluations of the system. Pilot evaluation results are used to draw conclusions regarding the suitability of the system to satisfy V/STOL requirements.

Stortz, Michael W.↗
NASA NTRS1994

Software-Implemented Fault Tolerance in Communications Systems

Software-implemented fault tolerance (SIFT) is used in many computer-based command, control, and communications (C(3)) systems to provide the nearly continuous availability that they require. In the communications subsystem of Space Station Alpha, SIFT algorithms are used to detect and recover from failures in the data and command link between the Station and its ground support. The paper presents a review of these algorithms and discusses how such techniques can be applied to similar systems found in applications such as manufacturing control, military communications, and programmable devices such as pacemakers. With support from the Tracking and Communication Division of NASA's Johnson Space Center, researchers at the University of Wyoming are developing a testbed for evaluating the effectiveness of these algorithms prior to their deployment. This testbed will be capable of simulating a variety of C(3) system failures and recording the response of the Space Station SIFT algorithms to these failures. The design of this testbed and the applicability of the approach in other environments is described.

Gantenbein, Rex E.↗
NASA NTRS1996

Intraply Hybrid Composites Would Contain Control Strips

"Smart" structural components with sensors and/or actuators distributed throughout their volumes made of intraply hybrid composite materials, according to proposal. Strips of hybrid control material interspersed with strips of ordinary (passive) composite material in some layers, providing distributed control capability. For example, near and far edges of plate bent upward by commanding bottom control strips to expand and simultaneously commanding upper control strips to contract.

Chamis, Christos C.↗
NASA NTRS1995

The Telestation: A product for distributed data gathering and operations

Advances in computer, navigation and wireless telecommunication technologies are enabling better electronic devices at reduced costs. Individually, these devices have been applied to increase the performance of many common systems, such as desktop computers, surveying equipment, and modems. However, we believe the convergence of these three technologies will create a product that simultaneously lowers life cycle costs while increasing operational effectiveness. Space Systems/Loral (SS/L) is developing portions of this product, known as the Telestation, for both terrestrial and orbital applications. The Telestation consists of an advanced microprocessor for command and data handling; a GPS receiver for position, time, and attitude information; and a Globalstar Transceiver for two-way digital communications. The Telestation provides the user with real-time command and control of globally distributed hardware elements. This capability can be applied terrestrially for gathering information (e.g., science, environmental, etc.) in remote or inhospitable locations, or where logistical support is inadequate. An in-orbit version can be used for spacecraft or payload operations, allowing principal investigators instant access to their payloads during all phases of a mission. This paper describes some cost effectiveness metrics of the Telestation, its development status, and its utility in both terrestrial and orbital applications.

Cleave, Robert R.↗
NASA NTRS1996

SAM-FS: LSC's New Solaris-Based Storage Management Product

SAM-FS is a full featured hierarchical storage management (HSM) device that operates as a file system on Solaris-based machines. The SAM-FS file system provides the user with all of the standard UNIX system utilities and calls, and adds some new commands, i.e. archive, release, stage, sls, sfind, and a family of maintenance commands. The system also offers enhancements such as high performance virtual disk read and write, control of the disk through an extent array, and the ability to dynamically allocate block size. SAM-FS provides 'archive sets' which are groupings of data to be copied to secondary storage. In practice, as soon as a file is written to disk, SAM-FS will make copies onto secondary media. SAM-FS is a scalable storage management system. The system can manage millions of files per system, though this is limited today by the speed of UNIX and its utilities. In the future, a new search algorithm will be implemented that will remove logical and performance restrictions on the number of files managed.

Angell, Kent↗
NASA NTRS1996

Flight Evaluation of an Aircraft with Side and Center Stick Controllers and Rate-Limited Ailerons

As part of an ongoing government and industry effort to study the flying qualities of aircraft with rate-limited control surface actuators, two studies were previously flown to examine an algorithm developed to reduce the tendency for pilot-induced oscillation when rate limiting occurs. This algorithm, when working properly, greatly improved the performance of the aircraft in the first study. In the second study, however, the algorithm did not initially offer as much improvement. The differences between the two studies caused concern. The study detailed in this paper was performed to determine whether the performance of the algorithm was affected by the characteristics of the cockpit controllers. Time delay and flight control system noise were also briefly evaluated. An in-flight simulator, the Calspan Learjet 25, was programmed with a low roll actuator rate limit, and the algorithm was programmed into the flight control system. Side- and center-stick controllers, force and position command signals, a rate-limited feel system, a low-frequency feel system, and a feel system damper were evaluated. The flight program consisted of four flights and 38 evaluations of test configurations. Performance of the algorithm was determined to be unaffected by using side- or center-stick controllers or force or position command signals. The rate-limited feel system performed as well as the rate-limiting algorithm but was disliked by the pilots. The low-frequency feel system and the feel system damper were ineffective. Time delay and noise were determined to degrade the performance of the algorithm.

Deppe, P. R.↗
NASA NTRS1997

STS-81 Flight Day 8

On this eighth day of the STS-81 mission, the flight crew, Cmdr. Michael A. Baker, Pilot Brent W. Jett, Mission Specialists, John M. Grunsfeld, Marsha S. Ivins, Peter J.K. Wisoff, and John Blaha, bid farewell to Jerry Linenger and cosmonauts of Mir. Prior to hatch closure, the astronauts and cosmonauts conduct a formal farewell ceremony in the Mir Core Module. They then field questions from Russian and U.S. reporters in a joint news conference. Commander Mike Baker, Pilot Brent Jett and Mission Specialists Jeff Wisoff, John Grunsfeld, Marsha Ivins and John Blaha say goodbye to Mir 22 Commander Valery Korzun, Flight Engineer Alexander Kaleri and the newest Mir crewmember, astronaut Jerry Linenger. The hatches on the two spacecraft are closed.

Source record↗
NASA NTRS1994

NASA Advisory Council Task Force on the Shuttle-Mir Rendezvous and Docking Missions

The NASA Advisory Council Task Force on the Shuttle-Mir rendezvous and docking convened on May 24 and 25, 1994. Based on the meetings, the Task Force made the following recommendations: at a minimum, the mission commander and payload commander for all subsequent Shuttle-Mir missions should be named at least 18 months in advance of the scheduled launch date; in order to derive early operational experience in advance of the first Mir docking mission, the primary objective of STS-63 should be Mir rendezvous and proximity operations; and if at all possible, the launch date for STS-63 should be moved forward.

Source record↗
NASA NTRS1996

A global spacecraft control network for spacecraft autonomy research

The development and implementation of the Automated Space System Experimental Testbed (ASSET) space operations and control network, is reported on. This network will serve as a command and control architecture for spacecraft operations and will offer a real testbed for the application and validation of advanced autonomous spacecraft operations strategies. The proposed network will initially consist of globally distributed amateur radio ground stations at locations throughout North America and Europe. These stations will be linked via Internet to various control centers. The Stanford (CA) control center will be capable of human and computer based decision making for the coordination of user experiments, resource scheduling and fault management. The project's system architecture is described together with its proposed use as a command and control system, its value as a testbed for spacecraft autonomy research, and its current implementation.

Kitts, Christopher A.↗
NASA NTRS1997

Generic Airplane Model Concept and Four Specific Models Developed for Use in Piloted Simulation Studies

A generic airplane model concept was developed to allow configurations with various agility, performance, handling qualities, and pilot vehicle interface to be generated rapidly for piloted simulation studies. The simple concept allows stick shaping and various stick command types or modes to drive an airplane with both linear and nonlinear components. Output from the stick shaping goes to linear models or a series of linear models that can represent an entire flight envelope. The generic model also has provisions for control power limitations, a nonlinear feature. Therefore, departures from controlled flight are possible. Note that only loss of control is modeled, the generic airplane does not accurately model post departure phenomenon. The model concept is presented herein, along with four example airplanes. Agility was varied across the four example airplanes without altering specific excess energy or significantly altering handling qualities. A new feedback scheme to provide angle-of-attack cueing to the pilot, while using a pitch rate command system, was implemented and tested.

Hoffler, Keith D.↗
NASA NTRS1997

STS-82 Flight Day 05 Highlights

The fifth day of the STS-82 mission begins with the crew, Commander Kenneth D. Bowersox, Pilot Scott J. Horowitz, Payload Commander Mark C. Lee, and Mission Specialists Gregory J. Harbaugh, Steven L. Smith, Joseph R. Tanner, and Steven A. Hawley completing the checkout of spacesuits well ahead of schedule, allowing them to start the second spacewalk of the flight. Harbaugh and Tanner went right to work, replacing a degraded Fine Guidance Sensor and a failed Engineering and Science Tape Recorder with new spares. The astronauts also installed a new unit known as the Optical Control Electronics Enhancement Kit, which will further increase the capability of the new Fine Guidance Sensor. During the spacewalk, the astronauts and flight controllers took note of cracking and wear incurred by thermal insulation which protects several areas of the telescope.

Source record↗
NASA NTRS1997

STS-82 Flight Day 07 Highlights

The seventh day of the STS-82 mission begins with the crew, Commander Kenneth D. Bowersox, Pilot Scott J. Horowitz, Payload Commander Mark C. Lee, and Mission Specialists Gregory J. Harbaugh, Steven L. Smith, Joseph R. Tanner, and Steven A. Hawley performing their third spacewalk of the mission by emerging from Discovery's airlock. Their first task is the replacement of a Solar Array Drive Electronics package which is used to control the positioning of Hubble's solar arrays. Harbaugh and Tanner next venture to the top of the telescope where they replaced covers over Hubble's magnetometers, which are used to sense the telescope's position in relation to the Earth through data acquired from the Earth's magnetic field. The spacewalking astronauts then place thermal blankets of multi-layer material over two areas of degraded insulation around the light shield portion of the telescope just below the top of the astronomical observatory.

Source record↗
NASA NTRS1997

STS-82 Flight Day 08 Highlights

The eighth day of the STS-82 mission begins with the crew, Commander Kenneth D. Bowersox, Pilot Scott J. Horowitz, Payload Commander Mark C. Lee, and Mission Specialists Gregory J. Harbaugh, Steven L. Smith, Joseph R. Tanner, and Steven A. Hawley performing the final spacewalk of the mission. Lee and Smith attach several thermal insulation blankets to three equipment compartments at the top of the Support Systems Module section of Hubble which contain key data processing, electronics and scientific instrument telemetry packages. Following the completion of that work, Lee and Smith briefly return to the airlock while flight controllers evaluated a possible glitch with one of four Reaction Wheel Assembly units in Hubble used to maneuver the telescope for its scientific observations. A spare Reaction Wheel Assembly was available aboard Discovery for a swap out during an additional spacewalk had it been necessary, but a few hours later, after further analysis, payload controllers reported that the Reaction Wheel Assembly was in excellent shape and operating at the proper speed.

Source record↗
NASA NTRS1997

STS-82 Flight Day 09 Highlights

The ninth day of the STS-82 mission begins with the crew, Commander Kenneth D. Bowersox, Pilot Scott J. Horowitz, Payload Commander Mark C. Lee, and Mission Specialists Gregory J. Harbaugh, Steven L. Smith, Joseph R. Tanner, and Steven A. Hawley placing the Hubble Space Telescope back into its own orbit to continue its investigation of the far reaches of the universe. At the time of deployment, the Shuttle was at an altitude of 334 nautical miles over the southwest coast of Africa. Hubble is now operating at the highest altitude it has ever flown, a 335 by 321 nautical mile orbit. A few hours after Hubble's deployment, the crew receives a congratulatory phone call from NASA Administrator Daniel Goldin. The four spacewalking crewmembers also answered questions from several news networks regarding their work over the past week to upgrade the telescope.

Source record↗
NASA NTRS1997

STS-82 Fight Day 10 Highlights

The tenth day of the STS-82 mission begins with the crew, Commander Kenneth D. Bowersox, Pilot Scott J. Horowitz, Payload Commander Mark C. Lee, and Mission Specialists Gregory J. Harbaugh, Steven L. Smith, Joseph R. Tanner, and Steven A. Hawley checking out Discovery's flight control systems in preparations for returning to Earth. The seven astronauts stow equipment and prepare for the planned landing at the Kennedy Space Center. Before wrapping up what is expected to be their final day in orbit, the astronauts held a press conference to discuss the flight, which set a record five spacewalks conducted to service the Hubble Space Telescope for the second time.

Source record↗