Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Charging Data”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,621 records · Page 90

Propagation of heavy cosmic-ray nuclei

Techniques for modeling the propagation of heavy cosmic-ray nuclei, and the required atomic and nuclear data, are assembled in this paper. Emphasis is on understanding nuclear composition in the charge range Z = 3-83. Details of the application of 'matrix methods' above a few hundred MeV/nucleon, a new treatment of electron capture decay, and a new table of cosmic ray-stable isotopes are presented. Computation of nuclear fragmentation cross sections, stopping power, and electron stripping and attachment are briefly reviewed.

Letaw, J. R.↗

Cosmic ray elemental abundances for Z = 26-42 measured on HEAO-3

An analysis is presented of 454 days of data from the Heavy Nuclei Experiment aboard the HEAO-3 satellite using an improved charge estimation algorithm is presented. A more precise normalization of Z = 32-42 abundances relative to iron is obtained, and more accurate detector response maps are used to recognize and reject a small class of events which was previously misidentified. The resulting abundances are in generally good agreement with solar system abundances with the first ionization potential (FIP) and with the Cameron solar system r-process (1982) with and without an applied FIP bias. The simplest interpretation of the results is that the cosmic ray source has solar system abundances modified by an FIP and/or volatility-dependent bias.

Binns, W. R.↗

First composition measurement of the bulk of the storm-time ring current (1 to 300 keV/e) with AMPTE-CCE

Measurements of the charge state and elemental compositions as well as differential intensities of ring current ions with energies of 1-315 keV/e, made with the Charge-Energy-Mass Spectrometer on the AMPTE/CCE spacecraft, are reported. An analysis of the data suggests that while the storm-time increases in the number densities of ring current H(+) and He(2+) may be roughly accounted for by the decreased volume of the compressed magnetosphere, the large jumps in the number and energy densities of O(+) require injection of energetic ionospheric ions.

Gloeckler, G.↗

Lightning strikes to a NASA airplane penetrating thunderstorms at low altitudes

The NASA Storm Hazards program was dedicated during the 1984 storm season to a study of lightning strikes on an instrumented F-106B aircraft, during penetrations of thunderstorms at altitudes lower than the 6-8 km center of lightning flash density. These altitudes coincide with the negative charge region of thunderstorms. An analysis of the correlation between the UHF band radar data obtained and TV images of lightning strikes indicates that, with a known aircraft position relative to the radar, the lightning channel motion can be adequately interpreted on the basis of radar echo evolution.

Mazur, V.↗

Electron beam experiments at high altitudes

Experiments with the electron gun on the SCATHA satellite produced evidence of beam-plasma interactions, and heating of the low energy electrons around the satellite. These experiments were conducted near geosynchronous orbit, in the dusk bulge, and plasma sheet, with one short operation in the lobe regions, providing a range of ambient plasma densities. The electron gun was operated at 50 eV, with beam currents of 1, 10, and 100 micro-A. Data from electrostatic analyzers and the dc electric field experiment show that the satellite charged to near the beam energy in sunlight, if the beam current was sufficient. Higher ambient densities required higher beam currents. The electrostatic analyzers showed distribution functions which had peaks, or plateaus, at energies greater than the satellite potential. These measurements indicate heating of the ambient plasma at several Debye lengths from the satellite, with the heated plasma then accelerated into the satellite. It is likely that the ambient plasma is in fact the photoelectron sheath generated by the satellite.

Olsen, R. C.↗

Kinetics of successive seeding of monodisperse polystyrene latexes. I - Initiation via potassium persulfate. II - Azo initiators with and without inhibitors

The polymerization kinetics of monodisperse polystyrene latexes with diameters of 1 micron are studied. The monodisperse latexes were prepared by the successive seeding method using 1 mM K2S2O8 with an 8 percent emulsifier surface coverage and 0.5 mM K2S2O8 with a 4 percent emulsifier surface coverage, and the kinetics were measured in a piston/cylinder dialometer. The data reveal that the polymerization rate decreases with increasing particle size; and the surface charge decreases with increasing particle size. The effects of initiators (AIBN and AMBN) and inhibitors (NH24SCN, NaNO2, and hydroquinone) on the product monodispersity and polymerization kinetics of latexes with diameters greater than 1 micron are investigated in a second experiment. It is observed that hydroquinone combined with AMBN are most effective in reducing nucleation without causing flocculation. It is noted that the kinetic transition from emulsion to bulk is complete for a particle size exceeding 1 micron in which the polymerization rate is independent of the particle size.

Sudol, E. D.↗

Electron beam experiments at high altitudes

Experiments with the electron gun on the SCATHA satellite produced evidence of beam-plasma interactions, and heating of the low energy electrons around the satellite. These experiments were conducted near geosynchronous orbit, in the dusk bulge, and plasma sheet, with one short operation in the lobe regions, providing a range of ambient plasma densities. The electron gun was operated at 50 eV, with beam currents of 1, 10, and 100 micro-A. Data from electrostatic analyzers and the DC electric field experiment show that the satellite charged to near the beam energy in sunlight, if the beam current was sufficient. Higher ambient densities required higher beam currents. The electrostatic analyzers showed distribution functions which had peaks, or plateaus, at energies greater than the satellite potential. These measurements indicate heating of the ambient plasma at several Debye lengths from the satellite, with the heated plasma then accelerated into the satellite. It is likely that the ambient plasma is in fact the photoelectron sheath generated by the satellite.

Olsen, R. C.↗

Long-term changes in reflectivity and large scale motions in the atmosphere of Jupiter and Saturn

A systematic photographic program, utilizing broad-band UV, blue, green, red and near IR pass-bands were carried out at the 60 cm. Tortugas Mountain Telescope. This is part of an ongoing program that spans two Jovian years (25 yrs). The purpose of this program is to provide an ongoing database to characterize high resolution data from spacecraft and earth-orbiting observatories. The standard observing program was maintained and support was given to other investigators who are carrying out complementary observing programs. The general aspect of the cloud decks were monitored, and reveal an interval that shows little variation in the general aspect of the clouddeck of Jupiter since 1981, when the North Temperature Belt darkened. A charge coupled device (CCD) camera was adapted for low cost operation, utilizing an IBM-AT clone for data acquisition. An RCA frame grabber was modified for encoding the archival images.

Beebe, Reta↗

Electrical measurements over active thunderstorms

During the summer of 1986, the air conductivity and the vertical electric field were measured over active thunderstorms from a high altitude U-2 airplane. The conductivity at 20 km remained relatively steady above storms with variations less than + or - 15 percent while vertical electric fields in excess of 5 kV/m were regularly observed. Estimates of the storm generator current and the C.T.R. Wilson (i.e., conduction) current can be obtained using the current densities derived from the conductivity and field measurements and integrated over area. Upward flowing currents of 0.05 to 7.7 A were observed with an average of 2.2 A. More importantly, the U-2 data show that the storm current varies linearly with flash rate, therefore, the average charge transfer per discharge should be independent of storm development or activity.

Blakeslee, Richard J.↗

Identification of Knock in NACA High-Speed Photographs of Combustion in a Spark-Ignition Engine

Report presents the results of a study of combustion in a spark-ignition engine given in NACA Technical Reports 704 and 727. The present investigation was made with the NACA high-speed motion-picture camera, operating at 40,000 photographs a second, and with a cathode-ray oscillograph operating on a piezoelectric pick-up in the combustion chamber. Photographs are presented showing that the origin of knock is not necessarily in the end gas. The data obtained indicates that knock takes place only in a part of the cylinder charge which has been previously ignited either by autoignition or by the passage of the flame fronts but which has not burned to completion. Mottled regions in the high-speed Schlieren photographs are demonstrated to represent combustion regions.

Miller, Cearcy D↗

Status of the development of rechargeable lithium cells

The progress in the development of the ambient temperature lithium - titanium disulfide rechargeable cell under development at the Jet Propulsion Laboratory is described in this paper. Originally aimed at achieving a specific energy of 100 Wh/kg, 'AA' cells have demonstrated 125 Wh/kg at the C/3 discharge rate. The results of evaluating cell design parameters are discussed and cycling test data are also included in the paper. Safety tests results at various over-charge and over discharge conditions and rates proved to be uneventful. The test results of cell with built-in overcharge mechanism proved the concept was feasible. Replacing the lithium foil electrode with a Li(x)C resulted in a capacity at 1mA/cm(exp 2) of 200 mAh/gm and 235 mAh/gm at 0.167 mA.

Halpert, G.↗

Star formation thresholds in H II galaxies with H I companions

We present high resolution Very Large Array (VLA) 21 cm line observations of five H II galaxies combined with previous lower resolution data from Taylor et al. (1993) and optical broadband R and H-alpha Charge Coupled Device (CCD) images of the systems. Following Kennicutt (1989) we calculated the threshold H I surface density for star formation for the H II galaxies and compared the location and shape of this predicted threshold density contour with the optical shape of the galaxies. We find generally a good correlation between these two, although a constant density contour of 10(exp 21)/sq cm fits the images of the optical galaxies equally as well. The H I synthesis observations have revealed that the H II galaxies have sharply peaked H I radial profiles, in contrast to the relatively flattened profiles of low surface brightness (LSB) galaxies, suggesting that large central concentrations of gas are a necessary condition for the occurrence of bursts of massive star formation seen in H II galaxies. These observations are consistent with the hypothesis that LSB galaxies represent the quiescent phase of H II galaxies, if a suitable mechanism exists (such as galaxy interactions) to cause H I to concentrate at the center of LSB galaxies prior to the onset of the burst of star formation. However, it is noted that the H II galaxies (and dwarf galaxies in general) span a relatively large range in mass. Since many properties correlate with mass (e.g., gas mass fraction), we point out that great care needs to be taken in choosing the proper comparison samples of LSB and H II galaxies.

Taylor, Christopher L.↗

System IDentification Programs for AirCraft (SIDPAC)

A collection of computer programs for aircraft system identification is described and demonstrated. The programs, collectively called System IDentification Programs for AirCraft, or SIDPAC, were developed in MATLAB as m-file functions. SIDPAC has been used successfully at NASA Langley Research Center with data from many different flight test programs and wind tunnel experiments. SIDPAC includes routines for experiment design, data conditioning, data compatibility analysis, model structure determination, equation-error and output-error parameter estimation in both the time and frequency domains, real-time and recursive parameter estimation, low order equivalent system identification, estimated parameter error calculation, linear and nonlinear simulation, plotting, and 3-D visualization. An overview of SIDPAC capabilities is provided, along with a demonstration of the use of SIDPAC with real flight test data from the NASA Glenn Twin Otter aircraft. The SIDPAC software is available without charge to U.S. citizens by request to the author, contingent on the requestor completing a NASA software usage agreement.

Morelli, Eugene A.↗

Charge Transfer Calculations and Database for Astrophysics

A variety of theoretical approaches, having different but overlapping energy ranges of applicability, are applied to investigate charge transfer processes for collisions of atomic ions with atoms and molecules. The methods include quantal molecular-orbital close-coupling, classical trajectory Monte Carlo, and continuum distorted wave methods. Recent collision systems studied include S(+4) + H, S(+4) + He, N(+7) + He, H2O, CO, and CO2, O(+q)(q = 1 - 8) + H, H2, and S(+q)(q = 1 - 16) + H2. The database effort is concentrating on astrophysically important reactions of atomic ions X(+q)(X=H-Zn, q=1-4, and selected higher charges) with H, He, various metal atoms, H2, and other selected molecular targets. Existing data, much of it produced by us, has been compiled and critically evaluated. Data for many reactions missing in the literature are estimated using the multichannel Landau-Zener approximation. Fits to cross sections and rate coefficients using standard functions are provided as well as tabulations of the raw data. The database is available on the World Wide Web at cfadc.phy.ornl.gov/astro/ps/data.

Wang, J. G.↗

Space radiation absorbed dose distribution in a human phantom

The radiation risk to astronauts has always been based on measurements using passive thermoluminescent dosimeters (TLDs). The skin dose is converted to dose equivalent using an average radiation quality factor based on model calculations. The radiological risk estimates, however, are based on organ and tissue doses. This paper describes results from the first space flight (STS-91, 51.65 degrees inclination and approximately 380 km altitude) of a fully instrumented Alderson Rando phantom torso (with head) to relate the skin dose to organ doses. Spatial distributions of absorbed dose in 34 1-inch-thick sections measured using TLDs are described. There is about a 30% change in dose as one moves from the front to the back of the phantom body. Small active dosimeters were developed specifically to provide time-resolved measurements of absorbed dose rates and quality factors at five organ locations (brain, thyroid, heart/lung, stomach and colon) inside the phantom. Using these dosimeters, it was possible to separate the trapped-proton and the galactic cosmic radiation components of the doses. A tissue-equivalent proportional counter (TEPC) and a charged-particle directional spectrometer (CPDS) were flown next to the phantom torso to provide data on the incident internal radiation environment. Accurate models of the shielding distributions at the site of the TEPC, the CPDS and a scalable Computerized Anatomical Male (CAM) model of the phantom torso were developed. These measurements provided a comprehensive data set to map the dose distribution inside a human phantom, and to assess the accuracy and validity of radiation transport models throughout the human body. The results show that for the conditions in the International Space Station (ISS) orbit during periods near the solar minimum, the ratio of the blood-forming organ dose rate to the skin absorbed dose rate is about 80%, and the ratio of the dose equivalents is almost one. The results show that the GCR model dose-rate predictions are 20% lower than the observations. Assuming that the trapped-belt models lead to a correct orbit-averaged energy spectrum, the measurements of dose rates inside the phantom cannot be fully understood. Passive measurements using 6Li- and 7Li-based detectors on the astronauts and inside the brain and thyroid of the phantom show the presence of a significant contribution due to thermal neutrons, an area requiring additional study.

STS-91 Shuttle Project↗

Compact Video Microscope Imaging System Implemented in Colloid Studies

Long description Photographs showing fiber-optic light source, microscope and charge-coupled discharge (CCD) camera head connected to camera body, CCD camera body feeding data to image acquisition board in PC, and Cartesian robot controlled via PC board. The Compact Microscope Imaging System (CMIS) is a diagnostic tool with intelligent controls for use in space, industrial, medical, and security applications. CMIS can be used in situ with a minimum amount of user intervention. This system can scan, find areas of interest in, focus on, and acquire images automatically. Many multiple-cell experiments require microscopy for in situ observations; this is feasible only with compact microscope systems. CMIS is a miniature machine vision system that combines intelligent image processing with remote control. The software also has a user-friendly interface, which can be used independently of the hardware for further post-experiment analysis. CMIS has been successfully developed in the SML Laboratory at the NASA Glenn Research Center and adapted for use for colloid studies and is available for telescience experiments. The main innovations this year are an improved interface, optimized algorithms, and the ability to control conventional full-sized microscopes in addition to compact microscopes. The CMIS software-hardware interface is being integrated into our SML Analysis package, which will be a robust general-purpose image-processing package that can handle over 100 space and industrial applications.

McDowell, Mark↗

Processing and Preparation of Advanced Stirling Convertors for Extended Operation at NASA Glenn Research Center

The U.S. Department of Energy (DOE), Lockheed Martin Space Company (LMSC), Sunpower Inc., and NASA Glenn Research Center (GRC) have been developing an Advanced Stirling Radioisotope Generator (ASRG) for use as a power system on space science missions. This generator will make use of the free-piston Stirling convertors to achieve higher conversion efficiency than currently available alternatives. NASA GRC is supporting the development of the ASRG by providing extended operation of several Sunpower Inc. Advanced Stirling Convertors (ASCs). In the past year and a half, eight ASCs have operated in continuous, unattended mode in both air and thermal vacuum environments. Hardware, software, and procedures were developed to prepare each convertor for extended operation with intended durations on the order of tens of thousands of hours. Steps taken to prepare a convertor for long-term operation included geometry measurements, thermocouple instrumentation, evaluation of working fluid purity, evacuation with bakeout, and high purity charge. Actions were also taken to ensure the reliability of support systems, such as data acquisition and automated shutdown checkouts. Once a convertor completed these steps, it underwent short-term testing to gather baseline performance data before initiating extended operation. These tests included insulation thermal loss characterization, low-temperature checkout, and full-temperature and power demonstration. This paper discusses the facilities developed to support continuous, unattended operation, and the processing results of the eight ASCs currently on test.

Oriti, Salvatore M.↗

Processing and Preparation of Advanced Stirling Convertors for Extended Operation

The U.S. Department of Energy (DOE), Lockheed Martin Space Company (LMSC), Sunpower Inc., and NASA Glenn Research Center (GRC) have been developing an Advanced Stirling Radioisotope Generator (ASRG) for use as a power system on space science missions. This generator will make use of the free-piston Stirling convertors to achieve higher conversion efficiency than currently available alternatives. NASA GRC is supporting the development of the ASRG by providing extended operation of several Sunpower Inc. Advanced Stirling Convertors (ASCs). In the past year and a half, eight ASCs have operated in continuous, unattended mode in both air and thermal vacuum environments. Hardware, software, and procedures were developed to prepare each convertor for extended operation with intended durations on the order of tens of thousands of hours. Steps taken to prepare a convertor for long-term operation included geometry measurements, thermocouple instrumentation, evaluation of working fluid purity, evacuation with bakeout, and high purity charge. Actions were also taken to ensure the reliability of support systems, such as data acquisition and automated shutdown checkouts. Once a convertor completed these steps, it underwent short-term testing to gather baseline performance data before initiating extended operation. These tests included insulation thermal loss characterization, low-temperature checkout, and full-temperature and power demonstration. This paper discusses the facilities developed to support continuous, unattended operation, and the processing results of the eight ASCs currently on test.

Oriti, Salvatore M.↗