Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Charging Behavior”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,621 records · Page 90
All sourcesNASA NTRSDOE OSTI
DOE OSTI2026

Interface and Thermophysical Properties of R 32 Refrigerant

Driven by the urgent demand for efficient cooling in microelectronics and advanced thermal management systems, difluoromethane (R32/CH 2 F 2 ) has emerged as a promising candidate owing to its favorable thermophysical properties, including high heat transfer efficiency and low viscosity. While bulk properties such as density, viscosity, and thermal conductivity have been widely studied, interfacial properties, including surface tension and interfacial thickness, remain comparatively underexplored, despite their importance in phase-transition dynamics. Here, we perform molecular dynamics (MD) simulations from 180 to 300 K using an optimized transferable force field for fluoropropenes with enhanced electrostatics to assess both bulk and interfacial behavior of R32. Simulations reproduced density within ±2.1%, viscosity within 3.05%, and thermal conductivity within 7.41% of NIST reference data. Heat capacities (C p and C v ) were predicted within 5%. For interfacial properties, surface tension trends were reproduced within 13.58% deviation, and the vapor–liquid coexistence curve closely matched reference data, yielding a critical temperature of 345.7 K (1.6% deviation) and a critical density of 0.397 g/cm 3 (6.4% deviation). Importantly, the vapor–liquid interface exhibited pronounced temperature-dependent broadening across the 180–290 K range. This behavior correlates with increasing molecular kinetic energy, reduction in intermolecular cohesive interactions, and a progressive loss of preferential dipole alignment, which collectively enhance thermal fluctuation amplitudes at elevated temperatures. These validated results provide predictive molecular-level insights, particularly for interfacial properties that remain less characterized. By reducing property prediction errors in key parameters such as critical temperature, this work provides reliable inputs for heat-exchanger and system models. Such correlations can support optimized component sizing, improved performance, and reduced refrigerant charge. Beyond R32, the methodology offers a transferable framework for blended and next-generation low-GWP refrigerants, contributing to sustainable thermal management aligned with the 2027 EU F-Gas regulation and 2030 Kigali Amendment.

Fluids↗
DOE OSTI2025

Discovering nuclear models from symbolic machine learning

Numerous phenomenological nuclear models have been proposed to describe specific observables within different regions of the nuclear chart. However, developing a unified model that describes the complex behavior of all nuclei remains an open challenge. Here, we explore whether symbolic Machine Learning (ML) can rediscover traditional nuclear physics models or identify alternatives with improved simplicity, fidelity, and predictive power. To address this challenge, we developed a Multi-objective Iterated Symbolic Regression approach that handles symbolic regressions over multiple target observables, accounts for experimental uncertainties and is robust against high-dimensional problems. As a proof of principle, we applied this method to describe the nuclear binding energies and charge radii of light and medium mass nuclei. Our approach identified simple analytical relationships based on the number of protons and neutrons, providing interpretable models with precision comparable to state-of-the-art nuclear models. Additionally, we integrated this ML-discovered model with an existing complementary model to estimate the limits of nuclear stability. These results highlight the potential of symbolic ML to develop accurate nuclear models and guide our description of complex many-body problems.

Nuclear structure↗
DOE OSTI2025

Impact of external screening on the valence and core level photoelectron spectra of monolayer W⁢S 2

Transition metal dichalcogenides (TMDs) represent an emerging class of layered materials with applications in microelectronics, optoelectronics, photonics, and catalysis. The confinement of charge carriers within the highly anisotropic, quasi-two-dimensional geometry of one-layer (1L) TMDs leads to reduced, variable dielectric screening, giving rise to a quasiparticle band gap that is highly susceptible to the surrounding dielectric environment. Here, exploiting the contrasting external dielectric environments of gold-supported and suspended 1L W⁢S 2 , we show how the electronic states of W⁢S 2 under the effective and ineffective screening environments align at a junction made within the same sheet of material. Photoelectron spectra point to the close alignment of the charge neutrality levels of W⁢S 2 in both environments, and the breakdown of rigid shifts between the valence states and core levels with the core levels shifting more than twice as much as the valence states. Furthermore, the effectively screened W⁢S 2 exhibits a valence state with the photoemission linewidth twice as large as the ineffectively screened suspended W⁢S 2 , presumably originated from the locally varying W⁢S 2 -Au distance and substrate disorders. Collectively, these findings provide key insights into the electronic behavior of W⁢S 2 and its photoemission process with the electronic states renormalized according to the external screening environments.

Dielectric properties↗
NASA NTRS1990

The mechanism of high-T(sub c) superconductivity due to bound hole mediators: Relationship to ferroelectricity

The mediation by bound holes creating Cooper pairing in high T(sub c) superconductors has its origin in charge transfer excitations on the multivalence cation (virtual excitions) and in bound excitions or polarizations associated with the oxygen 2p electrons. These phenomena are produced and/or enhanced by a high internal electric field which is itself created by virtue of the unique crystal structures and polyhedral building blocks of high T(sub c) materials. The polarizations which can create oxygen holes (in addition to excitions) may be due to simply the internal electric field or to polaronic and electron-deficient bond behavior. This gives rise to two energy-dependent oxygen bands near the Fermi level. The magnitude and direction of the internal electric fields were calculated for Y1Ba2Cu3O(7-delta) (1-2-3) and show strong z-direction fields at the Cu(2), O2, and O3 sites and an even stronger -z direction field at the O4 site. The field calculations also show why electrical conductivity in the 1-2-3 material is essentially in the base plane of the CuO5 pyramid (the CuO2 plane).

Vezzoli, G. C.↗
NASA NTRS1993

Transient current interruption mechanism in a magnetically delayed vacuum switch

The capacity of a magnetically delayed vacuum switch to conduct current depends on the density of plasma injected into the switch. Exceeding the current capacity results in the switch entering a lossy mode of operation characterized by a transient interruption of the main current (opening behavior) and a rapid increase of voltage across the vacuum gap. Streak and framing photographs of the discharge indicate that a decrease of luminosity near the middle of the gap preceeds the transition to the opening phase. The zone of low luminosity propagates toward the cathode. This evidence suggests that the mechanism causing the opening phase is erosion of the background plasma in a manner similar to that in a plasma-opening switch. The resulting ion depletion forces a space-charge-limited conduction mode. The switch inductance maintains a high discharge current even during the space-charge-limited conduction phase, thus producing high internal fields. The high accelerating voltage, in turn, produces electron and ion beams that heat the electrode surfaces. As a result of the heating, jets of electrode vapor issue from the electrodes, either cathode or anode, depending on the selection of electrode materials.

Morris, Gibson, Jr.↗
DOE OSTI2021

Machine Intelligence to Detect, Characterise, and Defend against Influence Operations in the Information Environment

Social media has enabled a new era of manipulation in the information and cognitive domains. Deceptive content—misleading, falsified, and fabricated—is routinely created and spread in the modern social media environment with the intent to create confusion and widen political and social divides, and exploit the societal conflict exacerbated by these divides in the real-world (aka physical domain). Such disinformation campaigns demonstrate a threat to the integrity of economic, political, cultural, public health, and national security institutions around the world. In this work we overview our artificial intelligence (AI) capabilities to detect, describe, and defend against information operations on Twitter as an example social platform to understand the influence of misleading and falsified content diffusion and better enable those charged with defending against such manipulation to enable responsive parties to counter it. We first present novel linguistically-informed deep learning (DL) models for misinformation and disinformation detection, and present an in-depth linguistic analysis of psycho-linguistic markers across broad deception categories. We then demonstrate how our models perform in the multilingual and multimodal setting and categorize falsified and misleading content based on the intent to deceive. We also provide a large-scale analysis to describe user behavior and spread patterns while engaging with deceptive content and report novel findings about the immediate diffusion of deceptive content by characterizing the vulnerable sub-populations and their demographics, and explicitly measuring speed and scale of deception spread to uncover who shares deceptive content, how quickly, how much, and how evenly. In addition, we measure audience reactions to misinformation and disinformation at scale, distinguishing the reactions of users identified as bots versus humans. Finally, we take advantage of deep translation and generation models to create unique solutions for real-time defense against digital deception and discuss how to apply causal inference to prescribe and intervene into strategic communications jointly across information, cognitive, and physical domains.

artificial intelligence, deep learning, neural lan↗
DOE OSTI2023

Diffusion in intact secondary cell wall models of plants at different equilibrium moisture content

Secondary plant cell walls are composed of carbohydrate and lignin polymers, and collectively represent a significant renewable resource. Leveraging these resources depends in part on a mechanistic understanding for diffusive processes within plant cell walls. Common wood protection treatments and biomass conversion processes to create biorefinery feedstocks feature ion or solvent diffusion within the cell wall. X-ray fluorescence microscopy experiments have determined that ionic diffusion rates are dependent on cell wall hydration as well as the ionic species through non-linear relationships. In this work, we use classical molecular dynamics simulations to map the diffusion behavior of different plant cell wall components (cellulose, hemicellulose, lignin), ions (Na + , K + , Cu2 + , Cl - ) and water within a model for an intact plant cell wall at various hydration states (3-30 wt% water). From these simulations, we analyze the contacts between different plant cell wall components with each other and their interaction with the ions. Generally, diffusion increases with increasing hydration, with lignin and hemicellulose components increasing diffusion by an order of magnitude over the tested hydration range. Ion diffusion depends on charge. Positively charged cations preferentially interact with hemicellulose components, which include negatively charged carboxylates. As a result, positive ions diffuse more slowly than negatively charged ions. Measured diffusion coefficients are largely observed to best fit piecewise linear trends, with an inflection point between 10 and 15% hydration. These observations shed light onto the molecular mechanisms for diffusive processes within secondary plant cell walls at atomic resolution.

09 BIOMASS FUELS↗
DOE OSTI2023

Yb Substitution and Ultralow Thermal Conductivity of the Ca 3– x Yb x AlSb 3 (0 ≤ x ≤ 0.81(1)) System

Here, a series of Yb-substituted Zintl phases in the Ca 3–x Yb x AlSb 3 (0 ≤ x ≤ 0.81(1)) system has been synthesized by initial arc melting and post-heat treatment, and their isotypic crystal structures were characterized by both powder and single crystal X-ray diffraction analysis. All four title compounds adopted the Ca 3 AlAs 3 -type structure (space group Pnma, Pearson code oP28, Z = 4). The overall structure can be described as a combination of the 1-dimensional (1D) infinite chain of ∞ 1 [Al(Sb 2 Sb 2/2 )] formed by two vertices sharing [AlSb 4 ] tetrahedral moieties and three Ca 2+ /Yb 2+ mixed sites located in between these 1D chains. The charge balance and the resultant independency of the 1D chains in the title system were explained by the Zintl-Klemm formalism [Ca 2+ /Yb 2+ ] 3 [(4b-Al 1– )(1b-Sb 2– ) 2 (2b-Sb 1– ) 2/2 ]. A series of DFT calculations proved that (1) the band overlap between the d-orbital states from two types of cations and the p-orbital states from Sb at the high symmetry Γ point implied a heavily doped degenerate semiconducting behavior of the quaternary Ca 2 YbAlSb 3 model and (2) the site preference of Yb for the M1 site was due to the electronic-factor criterion based on the Q values of each atomic site. The electron localization function calculations also proved that the two different shapes of lone pairs of the Sb atoms—the “umbrella-shape” and the “C-shape”—are determined by local geometry and the coordination environment on the anionic frameworks. Thermoelectric measurements of the quaternary title compound Ca 2.19(1) Yb 0.81 AlSb 3 showed an approximately two times larger ZT value than that of ternary Ca 3 AlSb 3 at 623 K due to increased electrical conductivity and ultralow thermal conductivity originated from Yb substitution for Ca.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Quantitative Analysis and Prediction of Thermal Runaway Metrics of High-Nickel Oxide Cathodes by Machine Learning Models

The pursuit of higher energy density in lithium-ion batteries has made high-nickel (Ni) layered oxides leading cathode candidates for next-generation electric vehicles. However, their poor thermal stability, particularly at Ni contents ≥ 90%, increases the risk of cathode-initiated thermal runaway. Furthermore, we present a data-driven framework combining linear and nonlinear machine learning models to predict key thermal runaway descriptors from a high-throughput differential scanning calorimetry database. With cathode composition and state of charge (SOC) as input features, the ensemble model accurately predicts peak temperature, heat release, and peak heat flow. SHAP analysis identifies Ni content and SOC as the dominant factors controlling thermal runaway temperature, while SOC primarily governs heat release and peak heat flow. Al, Mg, and Mn improve thermal stability by strengthening metal–oxygen bonding and delaying structural transformation, whereas B mainly reduces heat release through surface passivation. Validation with a new cathode composition confirms accurate prediction of SOC-dependent thermal runaway behavior and critical SOC.

25 ENERGY STORAGE↗
DOE OSTI2023

Topology-enhanced mechanical stability of swelling nanoporous electrodes

Abstract Materials like silicon and germanium offer a 10-fold improvement in charge capacity over conventional graphite anodes in lithium-ion batteries but experience a roughly threefold volume increase during lithiation, which challenges ensuring battery integrity. Nanoporous silicon, created by liquid-metal-dealloying, is a potentially attractive anode design to mitigate this challenge, exhibiting both higher capacity and extended cycle lifetimes. However, how nanoporous structures accommodate the large volume change is unknown. Here, we address this question by using phase-field modeling to produce nanoporous particles and to investigate their elastoplastic swelling behavior and fracture. Our simulations show that enhanced mechanical stability results from the network topology consisting of ligaments connected by bulbous, sphere-like nodes. The ligaments forcefully resist elongation while the nodes, behaving like isolated spherical particles, experience large stresses driving fracture. However, being smaller compared to a sphere of the same volume as the entire nanoporous particle, the nodes are more protected against fracture.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Harnessing interpretable and unsupervised machine learning to address big data from modern X-ray diffraction

The information content of crystalline materials becomes astronomical when collective electronic behavior and their fluctuations are taken into account. In the past decade, improvements in source brightness and detector technology at modern X-ray facilities have allowed a dramatically increased fraction of this information to be captured. Now, the primary challenge is to understand and discover scientific principles from big datasets when a comprehensive analysis is beyond human reach. We report the development of an unsupervised machine learning approach, X-ray diffraction (XRD) temperature clustering (X-TEC), that can automatically extract charge density wave order parameters and detect intraunit cell ordering and its fluctuations from a series of high-volume X-ray diffraction measurements taken at multiple temperatures. We benchmark X-TEC with diffraction data on a quasi-skutterudite family of materials, (Ca x Sr 1–x ) 3 Rh 4 Sn 13 , where a quantum critical point is observed as a function of Ca concentration. We apply X-TEC to XRD data on the pyrochlore metal, Cd 2 Re 2 O 7 , to investigate its two much-debated structural phase transitions and uncover the Goldstone mode accompanying them. We demonstrate how unprecedented atomic-scale knowledge can be gained when human researchers connect the X-TEC results to physical principles. Specifically, we extract from the X-TEC–revealed selection rules that the Cd and Re displacements are approximately equal in amplitude but out of phase. This discovery reveals a previously unknown involvement of 5d 2 Re, supporting the idea of an electronic origin to the structural order. Our approach can radically transform XRD experiments by allowing in operando data analysis and enabling researchers to refine experiments by discovering interesting regions of phase space on the fly.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Secondary structure determines electron transport in peptides

Proteins play a key role in biological electron transport, but the structure–function relationships governing the electronic properties of peptides are not fully understood. Despite recent progress, understanding the link between peptide conformational flexibility, hierarchical structures, and electron transport pathways has been challenging. Here, we use single-molecule experiments, molecular dynamics (MD) simulations, nonequilibrium Green’s function-density functional theory (NEGF-DFT), and unsupervised machine learning to understand the role of secondary structure on electron transport in peptides. Our results reveal a two-state molecular conductance behavior for peptides across several different amino acid sequences. MD simulations and Gaussian mixture modeling are used to show that this two-state molecular conductance behavior arises due to the conformational flexibility of peptide backbones, with a high-conductance state arising due to a more defined secondary structure (beta turn or 3 10 helices) and a low-conductance state occurring for extended peptide structures. These results highlight the importance of helical conformations on electron transport in peptides. Conformer selection for the peptide structures is rationalized using principal component analysis of intramolecular hydrogen bonding distances along peptide backbones. Molecular conformations from MD simulations are used to model charge transport in NEGF-DFT calculations, and the results are in reasonable qualitative agreement with experiments. Projected density of states calculations and molecular orbital visualizations are further used to understand the role of amino acid side chains on transport. Overall, our results show that secondary structure plays a key role in electron transport in peptides, which provides broad avenues for understanding the electronic properties of proteins.

Science & Technology - Other Topics↗
DOE OSTI2021

Exploring Transport Behavior in Hybrid Perovskites Solar Cells via Machine Learning Analysis of Environmental-Dependent Impedance Spectroscopy

Hybrid organic–inorganic perovskites are one of the promising candidates for the next-generation semiconductors due to their superlative optoelectronic properties. However, one of the limiting factors for potential applications is their chemical and structural instability in different environments. Herein, the stability of (FAPbI3)0.85(MAPbBr3)0.15 perovskite solar cell is explored in different atmospheres using impedance spectroscopy. An equivalent circuit model and distribution of relaxation times (DRTs) are used to effectively analyze impedance spectra. DRT is further analyzed via machine learning workflow based on the non-negative matrix factorization of reconstructed relaxation time spectra. This exploration provides the interplay of charge transport dynamics and recombination processes under environment stimuli and illumination. The results reveal that in the dark, oxygen atmosphere induces an increased hole concentration with less ionic character while ionic motion is dominant under ambient air. Under 1 Sun illumination, the environment-dependent impedance responses show a more striking effect compared with dark conditions. In this case, the increased transport resistance observed under oxygen atmosphere in equivalent circuit analysis arises due to interruption of photogenerated hole carriers. The results not only shed light on elucidating transport mechanisms of perovskite solar cells in different environments but also offer an effective interpretation of impedance responses.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Kinetic study of strong shock waves in fully ionized plasmas

Fully kinetic simulations are used in this work to study strong shock waves in fully ionized plasmas for charge state 𝑍 ranging from 1 to 18. The ion stress tensor amplitude agrees well with classical predictions within the compression layer; however, its spatial structure is noticeably shaped by nonlocal transport effects. The electron stress tensor remains significantly smaller than that of the ions for all values of 𝑍 considered. Ion overheating in the compression layer is observed to scale approximately linearly with 𝑍. Both findings diverge from hydrodynamic models based on classical electron stress formulations. In conclusion, the electrons exhibit strong nonlocal behavior in the compression layer, with Knudsen numbers approaching unity for 𝑍 ≥ 6.

Physics - Plasma physics↗
NASA NTRS1993

Micro- to macroscale perspectives on space plasmas

The Earth's magnetosphere is the most accessible of natural collisionless plasma environments; an astrophysical plasma 'laboratory'. Magnetospheric physics has been in an exploration phase since its origin 35 years ago but new coordinated, multipoint observations, theory, modeling, and simulations are moving this highly interdisciplinary field of plasma science into a new phase of synthesis and understanding. Plasma systems are ones in which binary collisions are relatively negligible and collective behavior beyond the microscale emerges. Most readily accessible natural plasma systems are collisional and nearest-neighbor classical interactions compete with longer-range plasma effects. Except for stars, most space plasmas are collisionless, however, and the effects of electrodynamic coupling dominate. Basic physical processes in such collisionless plasmas occur at micro-, meso-, and macroscales that are not merely reducible to each other in certain crucial ways as illustrated for the global coupling of the Earth's magnetosphere and for the nonlinear dynamics of charged particle motion in the magnetotail. Such global coupling and coherence makes the geospace environment, the domain of solar-terrestrial science, the most highly coupled of all physical geospheres.

Eastman, Timothy E.↗
DOE OSTI2021

Revealing the competition between charge density wave and superconductivity in CsV 3 Sb 5 through uniaxial strain

In this paper we report the effect of uniaxial strain ε applied along the crystalline a axis on the newly discovered kagome superconductor CsV 3 Sb 5 . At ambient conditions, CsV 3 Sb 5 shows a charge-density wave (CDW) transition at T CDW = 94.5K and superconducts below T c = 3.34K. In our paper, when the uniaxial strain ε is varied from –0.90% to 0.90%,T c monotonically increases by ~33% from 3.0 to 4.0 K, giving rise to the empirical relation T c (ε) = 3.4 + 0.56ε + 0.12ε 2 . On the other hand, for ε changing from –0.76% to 1.26%,TCDW decreases monotonically by ~10% from 97.5 to 87.5 K with T CDW (ε) = 94.5 – 4.72ε – 0.60ε 2 . The opposite response of T c and T CDW to the uniaxial strain suggests strong competition between these two orders. Comparison with hydrostatic pressure measurements indicate that it is the change in the c axis that is responsible for these behaviors of the CDW and superconducting transitions, and that the explicit breaking of the sixfold rotational symmetry by strain has a negligible effect. Combined with our first-principles calculations and phenomenological analysis, we conclude that the enhancement in Tc with decreasing c is caused primarily by the suppression of T CDW , rather than strain-induced modifications in the bare superconducting parameters. We propose that the sensitivity of T CDW with respect to the changes in the c axis arises from the impact of the latter on the trilinear coupling between the $M$$^{+}_{1}$ and the $L$$^{–}_{2}$ phonon modes associated with the CDW. Altogether, our paper reveals that the c-axis lattice parameter, which can be controlled by both pressure and uniaxial strain, is a powerful tuning knob for the phase diagram of CsV 3 Sb 5 .

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2021

Numerical Investigation of Enhanced Dehumidification Processes By Using Dielectrophoresis Principles in Moist Airflows

Dispersed particle-laden flows are encountered in many building and industrial applications, such as flow in a fluidized bed, hydrocarbon transportation in pipelines, and the fouling of air-cooled heat exchangers (Kuruneru et al., 2016; Ray et al., 2019; Wang et al., 2019). Computational fluid dynamic (CFD) models have been developed in recent years to depict particle-fluid and particle-particle interactions in laminar or turbulent flows with increasing accuracy and stability. One particular particle-laden system of interest for moisture control is electrically-enhanced condensation in air and water droplet flows. Electrically-enhanced condensation consists of the use of highly charged water droplets injected in the moist air. The droplets become electric seeds that attract polar water vapor molecules to their surfaces and promote condensation. The nucleation and growth of the charged droplets deplete the vapor phase near a droplet, which is compensated for by the dielectrophoresis flow and diffusion. Dielectrophoresis flow involves surrounding vapor at a distance of about 10 to 100 nm for droplets charged by an electrospray compared to ~2 nm for a single electron charge in a droplet. As the vapor molecules collapse on the surface of the droplets, their initial electrical charge decreases with time due to the neutralization of the ions. While the physics of this phenomena is well known, engineering models for predicting the condensation rates are not available. This work computationally investigates dehumidification of moist airflow in a converging rectangular duct. The objective is to develop an engineering model that predicts water vapor condensation by employing dielectrophoresis principles. We construct a Computational Fluid Dynamics (CFD) model of the duct with electrically-enhanced condensation. The model is implemented in the open-source software OpenFOAM. We utilize the Multi-Phase Particle-In-Cell (MP-PIC) method coupled with a Population Balance Equation (PBE) approach to simulate the particle-laden system. This methodology is an Eulerian-Lagrangian approach used to simulate the droplets' behavior in the humid air. The MP-PIC approach (Andrews and O'Rourke, 1996) mitigates the computational cost by parceling several fundamental particles with similar properties (such as types, sizes, and temperature) into one computational particle. Thus, the billions of particles can be substituted by millions of computational particles without significant loss of information. The PBE was considered with the Lagrangian frame to combine the particle distribution function used in MP-PIC (Kim et al., 2020). This approach preserves mass and energy conservation between the phases in the Eulerian and Lagrangian structures. The PBE in this procedure was directly linked to the discrete parcels, making the simulation of the particle distribution computationally efficient and robust. The MP-PIC-PBE approach used in the present work was applied to the dehumidification of air. Water droplets were injected in the air stream and forced to grow according to experimentally derived correlation. The experiments were conducted on a converging duct with the same geometry and boundary conditions used to build the CFD model. This approach enabled us to approximate the effect of dielectrophoresis phenomena on the droplet and air interface. This presentation will discuss the details of the new CFD model built for the duct, the implementation of the model in OpenFOAM CFD programming language, and the experimental validation of the newly developed model. The results revealed a moderate yet measurable increase in droplet diameter due to water vapor condensation at the vapor-liquid interface of the electrically charged droplets' surface. The seed water droplet particles grew in size by capturing the water vapor in the surrounding air. The OpenFOAM model predicted reductions of humidity in the air from 5 to 10 percent.

Yel Mahi, Maliha↗
DOE OSTI2026

Pressure‐Induced Structural and Magnetic Evolution in Layered Antiferromagnet YbMn 2 Sb 2

Electronic states under pressure exhibit unconventional spin and charge dynamics that provide a powerful route to uncover exotic phases in quantum materials. Here, we present the structural, magnetic, and electronic evolution of YbMn 2 Sb 2 under pressure. Single-crystal X-ray diffraction reveals a pressure-induced structural transition from the space group trigonal P$\overline{3}$m1 to the monoclinic P2 1 /m phase near 3.5 GPa, which remains stable up to 10 GPa. Magnetization measurements display an anomalously weak net magnetic moment and the absence of Curie–Weiss behavior up to 400 K, suggesting the formation of short-range Mn moment pairs that cancel macroscopically and subsequently evolve into long-range order upon cooling. Temperature-dependent resistivity shows semiconducting behavior with a transition at ∼119 K at ambient pressure, while pressure induces a dramatic suppression of resistance and the emergence of metallic-like temperature dependence, stabilized beyond 5 GPa. This pressure-driven semiconductor-metal transition is consistent with our density functional theory calculations, confirming the closing of the band gap under compression. Neutron diffraction under pressure identifies an incommensurate magnetic structure with antiparallel correlations between paired spins. Together, these results demonstrate how pressure-driven structural tuning and competing exchange interactions stabilize unconventional magnetic states in this low-dimensional magnetic semiconductor.

antiferromagnetic semiconductor↗