Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “CELLS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,621 records · Page 90

PGM-free Cathode Catalysts for PEM Fuel Cells: a Mini-Review on Stability Challenges

In recent years, significant progress has been achieved in the development of platinum group metal-free (PGM-free) oxygen reduction reaction (ORR) catalysts for proton exchange membrane (PEM) fuel cells. At the same time the limited durability of these catalysts remains a great challenge that needs to be addressed. In this mini-review, we summarize the recent progress in understanding the main causes of instability of PGM-free ORR catalysts in acidic environments, focusing on transition metal/nitrogen co-doped systems (M-N-C catalysts, M: Fe, Co, Mn). Of several possible degradation mechanisms, demetalation and carbon oxidation are found to be the most likely reasons for M-N-C catalysts/cathodes degradation.

Shao, Yuyan↗

Impact of Conformality and Crystallinity for Ultrathin 4 nm Compact TiO 2 Layers in Perovskite Solar Cells

The rapid rise in power conversion efficiencies of lead-based perovskite solar cells (PSCs) has established their promise, motivating scale-up and commercialization. As a thin film solar cell, interfacial properties are key to the performance of PSCs; there is a need to further understand which properties are important to control. Here, the impact of the compact TiO 2 (com-TiO 2 ) film properties on the performance of mesoporous PSCs is studied. Com-TiO 2 layers are fabricated by spray pyrolysis as well as by atomic layer deposition (ALD), using ALD as a proof-of-concept method to achieve highly conformal films of precisely controlled thickness. The com-TiO 2 layers’ conformality and surface roughness are examined by microscopy techniques; their relative crystallinity is studied by grazing-incidence X-ray diffraction with a synchrotron source and an in situ annealing chamber; and completed devices are analyzed by J–V and impedance spectroscopy techniques. The results show that an ultraconformal comTiO 2 layer can be thinned to 4 nm and match the performance of a ≈50 nm spray-pyrolysis TiO 2 layer. This work concludes that film conformality is the primary consideration for creating a high-performing com-TiO 2 layer, overriding any effects of flm crystallinity—a fnding that can guide fabrication choices for the scale-up of PSCs.

36 MATERIALS SCIENCE↗

Universal Design Principles for Cascade Heterojunction Solar Cells with High Fill Factors and Internal Quantum Efficiencies Approaching 100%

Cascade heterojunction (CHJ) organic solar cells have recently emerged as an alternative to conventional bulk heterojunctions and series-connected tandems due to their significant promise for high internal quantum efficiency (IQE) and broad spectral coverage. However, CHJ devices thus far have also exhibited poor fill factor (FF), resulting in minimal enhancements (or even decreases) in power conversion efficiency (PCE) when compared with single heterojunction (SHJ) cells. In this study, the major variables controlling the CHJ maximum power point and FF are determined using a combinatorial approach. By matching the maximum power point voltage (VMPP) of the constituent parallel-connected heterojunctions (subjunctions) and minimizing the injection barriers intrinsic to CHJs, high FF and PCE can be achieved. Optimized CHJ devices are demonstrated with >99% IQE in the interlayer and a 46% increase in PCE compared to a SHJ reference (4.1% versus 2.8%). Devices with a transparent exciton dissociation layer (EDL)/interlayer/acceptor structure are employed, such that each CHJ has absorption efficiency identical to its interlayer/acceptor SHJ counterpart. Using these results, a clear map of performance as a function of material parameters is developed, providing straightforward, universal design rules to guide future engineering of molecules and layer architectures for CHJ organic photovoltaic devices.

36 MATERIALS SCIENCE↗

High Voltage LiNi 0.5 Mn 0.3 Co 0.2 O 2 /Graphite Cell Cycled at 4.6 V with a FEC/HFDEC-Based Electrolyte

A high voltage LiNi0.5Mn0.3Co0.2O2/graphite cell with a fluorinated electrolyte formulation 1.0 m LiPF6 fluoroethylene carbonate/bis(2,2,2-trifluoroethyl) carbonate is reported and its electrochemical performance is evaluated at cell voltage of 4.6 V. Comparing with its nonfluorinated electrolyte counterpart, the reported fluorinated one shows much improved Coulombic efficiency and capacity retention when a higher cut-off voltage (4.6 V) is applied. Scanning electron microscopy/energy dispersive X-ray spectroscopy and X-ray photoelectron spectroscopy data clearly demonstrate the superior oxidative stability of the new electrolyte. The structural stability of the bulk cathode materials cycled with different electrolytes is extensively studied by X-ray absorption near edge structure and X-ray diffraction.

36 MATERIALS SCIENCE↗

One-Pot Hydrothermal Synthesis of Elements (B, N, P)-Doped Fluorescent Carbon Dots for Cell Labelling, Differentiation and Outgrowth of Neuronal Cells

The use of the chemically modified one-step facile hydrothermal process to develop Boron (B), Nitrogen (N), and Phosphorous (P) doped carbon dots (E@CDs) is reported on in this work. The chemical characterization of the E@CDs was systematically studied by several analytical techniques that confer doping of elements by known characteristics. The obtained E@CDs had observed very homogeneous size distribution and displayed excitation dependent fluorescence properties, and high quantum yield (QY) was measured in case of B and N doping. Excellent cell viability and good cellular uptake was observed for all E@CDs. Lastly, E@CDs were compared with pristine CDs on their effect on cell labelling, neural differentiation process and outgrowth of neurite network. By manipulating the doping of CDs, we can control the branching pattern and outgrowth of neuronal developments. The E@CDs are capable due to their photostability biocompatibility, and possible selective affinity towards nanomedicine applications.

36 MATERIALS SCIENCE↗

Association of qualitative and quantitative imaging features on multiphasic multidetector CT with tumor grade in clear cell renal cell carcinoma

Purpose: The purpose of the study was to determine if enhancement features and qualitative imaging features on multiphasic multidetector computed tomography (MDCT) were associated with tumor grade in patients with clear cell renal cell carcinoma (ccRCC). Methods: In this retrospective, IRB approved, HIPAA-compliant, institutional review board-approved study with waiver of informed consent, 127 consecutive patients with 89 low grade (LG) and 43 high grade (HG) ccRCCs underwent preoperative four-phase MDCT in unenhanced (UN), corticomedullary (CM), nephrographic (NP), and excretory (EX) phases. Previously published quantitative (absolute peak lesion enhancement, absolute peak lesion enhancement relative to normal enhancing renal cortex, 3D whole lesion enhancement and the wash-in/wash-out of enhancement within the 3D whole lesion ROI) and qualitative (enhancement pattern; presence of necrosis; pattern of; tumor margin; tumor–parenchymal interface, tumor–parenchymal interaction; intratumoral vascularity; collecting system infiltration; renal vein invasion; and calcification) assessments were obtained for each lesion independently by two fellowship-trained genitourinary radiologists. Comparisons between variables included χ{sup 2}, ANOVA, and student t test. p values less than 0.05 were considered to be significant. Inter-reader agreement was obtained with the Gwet agreement coefficient (AC1) and standard error (SE) was reported. Results: No significant differences were observed between the LG and HG ccRCC cohorts with respect to absolute peak lesion enhancement and relative lesion enhancement ratio. There was a significant inverse correlation between low and high grade ccRCC and tumor enhancement the NP (71 HU vs. 54 HU, p < 0.001) and EX (52 HU vs. 39 HU, p < 0.001) phases using the 3D whole lesion ROI method. The percent wash-in of 3D enhancement from the UN to the CM phase was also significantly different between LG and HG ccRCCs (352% vs. 255%, p = 0.003). HG lesions showed significantly more calcification, necrosis, collecting system infiltration and ill-defined tumor margins (p < 0.05). Overall agreement between the two readers had a mean AC1 of 0.8172 (SE 0.0235). Conclusions: Quantitatively, high grade ccRCC had significantly lower whole lesion enhancement in the NP and EX phases on MDCT. Qualitatively, high grade ccRCC were significantly more likely to be associated with calcifications, necrosis, collecting system infiltration, and an ill-defined tumor margin.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Juxtatumoral perinephric fat analysis in clear cell renal cell carcinoma

Purpose: The purpose of the study was to evaluate the feasibility of using contrast-enhanced computed tomography (CECT)-based texture analysis (CTTA) metrics to differentiate between juxtatumoral perinephric fat (JPF) surrounding low-grade (ISUP 1–2) versus high-grade (ISUP 3–4) clear cell renal cell carcinoma (ccRCC). Methods: In this IRB-approved study, we retrospectively queried the surgical database between June 2009 and April 2016 and identified 83 patients with pathologically confirmed ccRCC (low grade: n = 54, mean age = 61.5 years, 18F/35M; high grade n = 30, mean age = 61.7 years, 8F/22M) who also had pre-operative multiphase CT acquisitions. CT images were transferred to a 3D workstation, and nephrographic phase JPF regions were manually segmented. Using an in-house developed Matlab program, a CTTA panel comprising of texture metrics extracted using six different methods, histogram, 2D- and 3D-Gray-level co-occurrence matrix (GLCM) and Gray-level difference matrix (GLDM), and 2D-Fast Fourier Transform (FFT) analyses, was applied to the segmented images to assess JPF textural heterogeneity in low- versus high-grade ccRCC. Univariate analysis and receiver-operator characteristics (ROC) analysis were used to assess interclass differences in texture metrics and their prediction accuracy, respectively. Results: All methods except GLCM consistently revealed increased heterogeneity in the JPF surrounding high- versus low-grade ccRCC. FFT showed increased complexity index (p < 0.01). Histogram analysis showed increased kurtosis and positive skewness in (p < 0.03), and GLDM analysis showed decreased measure of correlation coefficient (MCC) (p < 0.04). Several of the GLCM metrics showed statistically significant (p < 0.04) textural differences between the two groups, but with no consistent trend. ROC analysis showed that MCC in GLCM analysis had an area under the curve of 0.75. Conclusions: Our study suggests that CTTA of ccRCC shows statistically significant textural differences in JPF surrounding high- versus low-grade ccRCC.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

CT-based machine learning model to predict the Fuhrman nuclear grade of clear cell renal cell carcinoma

Purpose: To predict the Fuhrman grade of clear cell renal cell carcinoma (ccRCC) with a machine learning classifier based on single- or three-phase computed tomography (CT) images. Materials and methods: Patients with pathologically proven ccRCC from February 1, 2009 to September 31, 2018 who were not treated were retrospectively collected for machine learning-based analysis. The texture features were extracted and ranked from precontrast phase (PCP), corticomedullary phase (CMP), nephrographic phase (NP) and three-phase CT images, and open-source gradient boosting from the decision tree library of CatBoost was used to establish a machine learning classifier to differentiate low- from high-grade ccRCC. The performances of machine learning classifiers based on features from single- and three-phase CT images were compared with each other. Results: A total of 231 patients with 232 pathologically proven ccRCC lesions were retrospectively collected. 35, 36, 41, and 22 Features were extracted and ranked from PCP, CMP, NP, and three-phase CT images, respectively. The machine learning model based on three-phase CT images [area under the ROC curve (AUC) = 0.87] achieved the best diagnostic performance for differentiating low- from high-grade ccRCC, followed by single-phase NP (AUC = 0.84), CMP (AUC = 0.80), and PCP images (AUC = 0.82). Conclusion: Machine learning classifiers can be promising noninvasive techniques to differentiate low- and high-Fuhrman nuclear grade ccRCC, and classifiers based on three-phase CT images are superior to those based on features from each single phase.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Metastatic castration resistant prostate cancer with squamous cell, small cell, and sarcomatoid elements—a clinicopathologic and genomic sequencing-based discussion

Histologic variants are uncommon but well reported amongst cases of prostatic adenocarcinoma, including those in the setting of hormonal and/or chemoradiation therapy and castration resistance. However, the spectrum of morphologic phenotypes and molecular alterations present in such histologic variants are still incompletely understood. Herein, we describe a case of metastatic prostatic adenocarcinoma with hormonal and chemoradiation therapy-associated differentiation, displaying a combination of squamous cell, small cell, and sarcomatoid elements. The morphologic, immunohistochemical, and molecular observations are discussed with attention given to the gene alterations present, including in TP53, NF1, AR, PTEN, and RB1. Finally, we will compare our findings with those observed in uncommonly reported similar cases so as to detail the molecular underpinnings of such processes which may carry therapeutic implications.

62 RADIOLOGY AND NUCLEAR MEDICINE↗