Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “CALCULATION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,621 records · Page 90

An alternative approach for MLE calculation in nonlinear continuous dynamic systems

As an important metric to tell if a nonlinear dynamic system has a singular attractor or divergent trajectory, the maximal Lyapunov exponent (MLE) can be calculated from either system models or time series of state variable measurement. However, in the real world, due to inaccurate models, measurement noise, and the fact that sometimes state variables cannot be measured directly, it is very difficult to get an accurate MLE, which limits its application in, for example, in prediction of a nonlinear physical system (e. g. power systems, etc.) behavior. To overcome these factors, this paper proposed a trajectory-estimation-based MLE calculation approach. The proposed approach addressed how to calculate the MLE when state variables cannot be accessed directly, and uncertainties in system models, as well as noise in measurements. The simulation results shows that the proposed approach is able to handle well the nonlinear measurement functions between state variables and measurements, and get better results than pure model-based approaches or measurement-based approaches in front of measurement noise and model uncertainties.

maximal Lyapunov exponents, nonlinear differential↗

Calculation of {sup 15}N NMR chemical shifts of amines in the framework of the density functional theory

The {sup 15}N NMR magnetic shielding constants (followed by recalculation into chemical shifts) in a representative series of amines were calculated in the framework of the density functional theory. The results were compared with experiment. The accuracy factors of this calculation (functional, basis set, solvent effects, and multistandard) were studied. Taking into account all the above factors leads to a noticeable decrease in the average absolute error in the calculation of the {sup 15}N NMR chemical shifts (from 13 to 4 ppm) in a range of their changing in the studies series of compounds of ∼60 ppm (which is 6—7% in relative units).

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Thermodynamic Assessment of the Ag-Se System Aided by First-Principles Calculations

The substitution of Ag for Cu in CuIn x Ga 1-x Se 2 -based photovoltaic absorber layers can be used to adjust the bandgap energy to better optimize the overall cell efficiency. Based on available thermochemical, equilibrium, and structural data, the Ag-Se system has been assessed and modeled. Given the order-disorder structure transition Ag 2 Se, the 2- and 3-sublattice models were used to represent the low- and high-temperature phases of the intermetallic compound respectively. Density functional theory based first-principles calculations were used to calculate the Gibbs energy of formation of the end-member compounds. A set of modeling parameters was obtained by the CALculation of PHAse Diagram approach and reasonable agreement was obtained between the experimental thermodynamic properties of the stable phases and the phase relationships in the Ag-Se system.

Chemistry↗

Stress-dependent solute energetics in W–Re alloys from first-principles calculations

Here, we present a systematic study of Re solute transport energetics in W using density functional theory calculations. The study focuses on substitutional solute diffusion in the presence of dislocation strain fields as a first step toward capturing the essential physics of solid solution hardening/softening in W–Re alloys. We calculate the heat of solution, the vacancy formation energy and the solute migration energy as functions of both hydrostatic and shear strains. Our results show that the vacancy formation energy scales with hydrostatic deformation, whereas it decreases with increasing shear strain. The migration energy decreases with hydrostatic deformation, whereas it displays path-length-dependent behavior under shear deformation. In addition, we compute the binding energies of an Re solute atom to the cores of $1/2 \langle 111 \rangle$ screw and edge dislocations, and find the binding energy to be highest in the tensile lobe of the edge core. Finally, we obtain the dilatational stress due to a solute atom as a function of distance. Our calculations are then used to parameterize the jump rate of Re atoms in W as a function of the underlying stress state.

36 MATERIALS SCIENCE↗

Precise calculation of quasienergies of a driven two-level atom based on the Guo-Wu-Van Woerkom solution

The exact algebraic solution recently obtained by Guo, Wu, and Van Woerkom (Phys. Rev. A 73 (2006) 023419) made possible accurate calculations of quasienergies of a driven two-level atom with an arbitrary original energy spacing and laser intensity. Due to the complication of the analytic solutions that involves an infinite number of infinite determinants, many mathematical difficulties must be overcome to obtain precise values of quasienergies. In this paper, with a further developed algebraic method, we show how to solve the computational problem completely and results are presented in a data table. With this table, one can easily obtain all quasienergies of a driven two-level atom with an arbitrary original energy spacing and arbitrary intensity and frequency of the driving laser. The numerical solution technique developed here can be applied to the calculation of Freeman resonances in photoelectron energy spectra. As an example for applications, we show how to use the data table to calculate the peak laser intensity at which a Freeman resonance occurs in the transition between the ground Xe 5p P{sub 3/2} state and the Rydberg state Xe 8p P{sub 3/2}.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Relativistic CI calculations of spectroscopic data for the 2p{sup 6} and 2p{sup 5}3l configurations in Ne-like ions between Mg III and Kr XXVII

Energies, E1, M1, E2, M2 transition rates, oscillator strengths, and lifetimes from relativistic configuration interaction calculations are reported for the states of the 2p{sup 6}, 2p{sup 5}3s, 2p{sup 5}3p, and 2p{sup 5}3d, configurations in all Ne-like ions between Mg III and Kr XXVII. Core–valence and core–core correlation effects are accounted for through single and double excitations to increasing sets of active orbitals. The Breit interaction and leading quantum electrodynamic effects are included as perturbations. The results are compared with experiments and other recent benchmark calculations. In Mg III, Al IV, Si V, P VI, S VII, and Ar IX, for which experimental energies are known to high accuracy, the mean error in the calculated energies is only 0.011%.

74 ATOMIC AND MOLECULAR PHYSICS↗

Relativistic configuration-interaction calculations of electric dipole n=2−n=3 transitions for medium-charge Li-like ions

In this work, the multi-configuration Dirac–Fock and relativistic configuration-interaction methods have been used to calculate the transition wavelengths, electric dipole transition probabilities, line strengths, and absorption oscillator strengths for the 2s–3p, 2p–3s, and 2p–3d transitions in Li-like ions with nuclear charge Z=7–30. Our calculated values are in good agreement with previous experimental and theoretical results. We took the contributions from Breit interaction, finite nuclear mass corrections, and quantum electrodynamics corrections to the initial and final levels into account, and also found that the contributions from Breit interaction, self-energy, and vacuum polarization grow fast with increasing nuclear charge for a fixed configuration. The ratio of the velocity to length form of the transition rate (A{sub v}/A{sub l}) was used to estimate the accuracy of our calculations.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Calculation of energy levels, lifetimes and radiative data for La XXIX to Sm XXXIV

Highlights: • Lowest 27 levels for La XXIX to Sm XXXIV are calculated. • Radiative data for E1, E2, M1 and M2 transitions within lowest 27 levels are presented. • Effect of nuclear charge on the transition wavelength of allowed EUV transitions is studied graphically. • Effect of nuclear charge on transition probability of allowed EUV transitions is studied graphically. • Lifetimes for lowest 27 fine structure levels are provided. We present the most comprehensive atomic data for La XXIX to Sm XXXIV with single electron excitation from M-shell to N-shell and N-shell to higher shells. We have presented energy levels, lifetimes and radiative data using Multi-configuration Dirac–Fock (MCDF) method for the lowest 27 states belonging to the configuration 3d{sup 10}4l (l=0,1,2,3), 3d{sup 10}5l (l=0,1,2,3,4), 3d{sup 10}6l (l=0,1,2,3,4) and 3d{sup 9}4s{sup 2}. We have also considered relativistic effects by incorporating quantum electrodynamics (QED) and Breit corrections. We have made comparisons of our presented results with available theoretical as well as experimental results and a good agreement is achieved. Further, we have also reported energy levels by performing distorted wave calculations with fully relativistic flexible atomic code (FAC). The calculations match well with MCDF results. Additionally, we have investigated the effect of nuclear charge on transition wavelength and radiative rates for strong Extreme Ultraviolet (EUV) transitions from n=4→4. We believe that our reported data in this work may be useful in various applications of lanthanide ions related to broad area of research such as applied physics, laser physics and astrophysics etc.

74 ATOMIC AND MOLECULAR PHYSICS↗

A method for including external feed in depletion calculations with CRAM and implementation into ORIGEN

A method for including external feed with polynomial time dependence in depletion calculations with the Chebyshev Rational Approximation Method (CRAM) is presented and the implementation of CRAM to the ORIGEN module of the SCALE suite is described. In addition to being able to handle time-dependent feed rates, the new solver also adds the capability to perform adjoint calculations. Results obtained with the new CRAM solver and the original depletion solver of ORIGEN are compared to high precision reference calculations, which shows the new solver to be orders of magnitude more accurate. Lastly, in most cases, the new solver is up to several times faster due to not requiring similar substepping as the original one.

97 MATHEMATICS AND COMPUTING↗

Utilization of ACE nuclear data file toolkit ACEtk to calculate relative sensitivity coefficients of point-kinetics parameters

Sensitivity and uncertainty methods are quintessential for nuclear criticality safety and experiment design. This type of analysis relies on calculations of sensitivity coefficients; sensitivity coefficients of the effective neutron multiplication factor with respect to some nuclear data are predominantly calculated and used. As a part of the Laboratory Directed Research & Development project EUCLID (Experiments Underpinned by Computational Learning for Improvements in nuclear Data) at Los Alamos National Laboratory, sensitivity coefficients of many radiation detector measurement responses with respect to nuclear data were investigated. Specifically, this paper outlines a method to calculate point-kinetics parameters relative sensitivity coefficients with respect to nuclear data. Point-kinetics parameters such as the prompt neutron decay constant, effective delayed neutron fraction, and neutron generation time are especially important to experimenters and reactor operators designing systems with dynamic neutron populations. This method couples capabilities of the ACE (A Compact ENDF) nuclear data file toolkit, ACEtk, with the ability to load cross sections into the radiation transport code Monte Carlo N-Particle (MCNP). In conclusion, key aspects of optimizing this method for a particular application and sensitivity profiles of the Jezebel criticality experiment are examined and discussed.

98 NUCLEAR DISARMAMENT, SAFEGUARDS, AND PHYSICAL P↗

Comparison of various approaches to the calculation of optically induced forces

Various approaches used for the calculation of optically induced forces applied to a transparent optical medium imbedded in a close plane optical resonator are analyzed. The forces are calculated by means of analysis of a change in the eigen frequency and energy stored in the resonator at various positions of the medium. It is shown that results obtained are identical to those calculated by means of approaches based on the Maxwell stress tensor, based on an analysis of a change in the momentum of light. An exception is for results obtained on the base of last versions of the Lorentz density force. - Highlights: Black-Right-Pointing-Pointer There are no Lorentz forces in a homogeneous optical medium. Black-Right-Pointing-Pointer A net force produced by an inhomogeneous electrostriction pressure is equal to zero. Black-Right-Pointing-Pointer Any distributions of the Lorentz force in a homogeneous optical medium are misleading.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Thermodynamic modeling of the La-Te system aided by first-principles calculations

A complete thermodynamic description of the La-Te binary system is developed by means of CALculation of PHAse Diagram (CALPHAD) method in combination with available experimental data in the literature and the present first-principles calculations based on density functional theory. The intermetallic phases with homogeneity ranges, La3-xTe4 and LaTe2-x, are modeled using a two-sublattice (La,Va)3(Te)4 model and a three-sublattice (La)1(Te)1(Te,Va)1 model based on their structure features, respectively. The intermetallic phases, LaTe and LaTe3, are treated as stoichiometric compounds. The thermodynamic properties of the intermetallic compounds and their corresponding end members at finite temperatures are predicted using first-principles quasi-harmonic approach. The associate solution model is used to describe the short-range ordering behavior of the liquid phase. The calculated phase diagram agrees well with the available phase equilibrium data in the literature.

Chemistry↗

CALPHAD modeling of uranium nitride (UN) fabrication routes enabled by first-principles calculations

The thermochemical details of fabricating uranium nitride (UN) by ammonolysis of uranium tetraflouride (UF 4 ) were determined using density functional theory (DFT) and CALculation of PHAse Diagrams (CALPHAD) computational methods. The thermochemical data of all binary, ternary, and quaternary U-H-N-F phases were computed using DFT, and the data for the phases that have not been measured experimentally, including UN 2 and NH 4 F(g), were combined with existing experimentally-determined data for CALPHAD modeling. The DFT data were benchmarked using experimental Gibbs energy of reaction and experimental thermochemical data for individual species. Phase diagrams relevant to the ammonolysis reaction are depicted, showing regions of stability for solid U-N, U-F and U-N-F phases. An unidentified phase produced in a previous experiment was identified as UN 0.95 F 1.2 (UNF) by comparing its X-ray diffraction spectrum to the experimental spectrum, and its formation during the fabrication of UN from UF 4 is supported by the simulated phase diagram. Here, it is calculated that UN 2 can be produced by the ammonolysis of UF 4 , but requires elevated temperatures, high NH 3 (g) partial pressure, and large amounts of flowing NH 3 (g) to avoid solid flu oride impurities in the uranium nitride. Likewise, U 2 N 3 can be produced instead at temperatures greater than 980 K. The use of silane (SiH 4 ) gas was investigated as a potential additive in the ammonolysis fabrication route to speed removal of fluorine. The addition of SiH 4 (g) offers little advantage to the removal of fluorine, and adds the complication of Si 3 N 4 formation. The use of DFT to fill in missing data to perform CALPHAD calculations demonstrated here allows for the determination of more comprehensive and trustworthy phase diagrams than the use of existing experimental data alone.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Understanding PGM-free Catalysts by Linking Density Functional Theory Calculations and Structural Analysis: Perspectives and Challenges

Here, we discuss perspectives and challenges in applying density functional theory for the calculation of spectroscopic properties of platinum group metal (PGM)-free electrocatalysts for oxygen reduction. More specifically, we discuss recent advances in the density functional theory calculations of core-level shifts in binding energies of N 1s electrons as measured by X-ray photoelectron spectroscopy. The link between the density functional theory calculations, the electrocatalytic performance of the catalysts, and structural analysis using modern spectroscopic techniques is expected to significantly increase our understanding of PGM-free catalysts at the molecular level.

36 MATERIALS SCIENCE↗

Sassena — X-ray and neutron scattering calculated from molecular dynamics trajectories using massively parallel computers

Massively parallel computers now permit the molecular dynamics (MD) simulation of multi-million atom systems on time scales up to the microsecond. However, the subsequent analysis of the resulting simulation trajectories has now become a high performance computing problem in itself. Here, we present software for calculating X-ray and neutron scattering intensities from MD simulation data that scales well on massively parallel supercomputers. The calculation and data staging schemes used maximize the degree of parallelism and minimize the IO bandwidth requirements. The strong scaling tested on the Jaguar Petaflop Cray XT5 at Oak Ridge National Laboratory exhibits virtually linear scaling up to 7000 cores for most benchmark systems. Since both MPI and thread parallelism is supported, the software is flexible enough to cover scaling demands for different types of scattering calculations. The result is a high performance tool capable of unifying large-scale supercomputing and a wide variety of neutron/synchrotron technology.

Computer Science↗

Spectral Quadrature method for accurate O ( N ) electronic structure calculations of metals and insulators

We present the Clenshaw–Curtis Spectral Quadrature (SQ) method for real-space O(N) Density Functional Theory (DFT) calculations. In this approach, all quantities of interest are expressed as bilinear forms or sums over bilinear forms, which are then approximated by spatially localized Clenshaw–Curtis quadrature rules. This technique is identically applicable to both insulating and metallic systems, and in conjunction with local reformulation of the electrostatics, enables the O(N) evaluation of the electronic density, energy, and atomic forces. The SQ approach also permits infinite-cell calculations without recourse to Brillouin zone integration or large supercells. We employ a finite difference representation in order to exploit the locality of electronic interactions in real space, enable systematic convergence, and facilitate large-scale parallel implementation. In particular, we derive expressions for the electronic density, total energy, and atomic forces that can be evaluated in O(N) operations. We demonstrate the systematic convergence of energies and forces with respect to quadrature order as well as truncation radius to the exact diagonalization result. In addition, we show convergence with respect to mesh size to established O(N 3 ) planewave results. In conclusion, we establish the efficiency of the proposed approach for high temperature calculations and discuss its particular suitability for large-scale parallel computation.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Efficacy of the SU(3) scheme for ab initio large-scale calculations beyond the lightest nuclei

We report on the computational characteristics of ab initio nuclear structure calculations in a symmetry-adapted no-core shell model (SA-NCSM) framework. We examine the computational complexity of the current implementation of the SA-NCSM approach, dubbed LSU3shell, by analyzing ab initio results for 6 Li and 12 C in large harmonic oscillator model spaces and SU3-selected subspaces. We demonstrate LSU3shell’s strong-scaling properties achieved with highly-parallel methods for computing the many-body matrix elements. Results compare favorably with complete model space calculations and significant memory savings are achieved in physically important applications. In particular, a well-chosen symmetry-adapted basis affords memory savings in calculations of states with a fixed total angular momentum in large model spaces while exactly preserving translational invariance.

74 ATOMIC AND MOLECULAR PHYSICS↗

Reproducibility in G 0 W 0 calculations for solids

Ab initio many-body perturbation theory within the GW approximation is a Green's function formalism widely used in the calculation of quasiparticle excitation energies of solids. In what has become an increasingly standard approach, Kohn–Sham eigenenergies, generated from a DFT calculation with a strategically-chosen exchange–correlation functional “starting point”, are used to construct G and W, and then perturbatively corrected by the resultant GW self-energy. In practice, there are several ways to construct the GW self-energy, and these can lead to variations in predicted quasiparticle energies. For example, for ZnO and TiO 2 , the GW fundamental gaps reported in the literature can vary by more than 1 eV depending on the GW code used. In this work, we calculate and analyze GW quasiparticle (QP) energies of these and other systems with three different GW codes: BERKELEYGW, ABINIT and YAMBO. Through a systematic analysis of the GW implementation of these three codes, we identify the primary origin of major discrepancies between codes reported in prior literature to be the different implementations the Coulomb divergence in the Fock exchange term and the frequency integration scheme of the GW self-energy. We then eliminate these discrepancies by using common numerical methods and algorithms, demonstrating that the same quasiparticle energies for a given material can be obtained with different codes, within numerical differences ascribable to the technical details of the underling implementations. This work will be important for users and developers in assessing the precision of future GW applications and methods.

36 MATERIALS SCIENCE↗