Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “AROMATICS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,621 records · Page 90
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Upconversion of non-recycled MSW paper fractions into biochar via slow pyrolysis and life cycle analysis: Pathways to net negative GHG emission

This study presents an integrated and sustainable approach to valorizing non-recycled municipal solid waste (MSW), a heterogeneous and underutilized waste stream destined for landfilling, by converting it into valuable biochar resources. Specifically, we investigated the upcycling of nonrecycled paper waste based on compositional analysis into four major fractions: high cellulose, high lignin, high contamination, and high ash content papers. These fractions were then homogenized and subjected to slow pyrolysis. The high cellulose fraction (36.1 %) was the most abundant, and contained 66.7 % cellulose, while the high lignin fraction showed the highest lignin (12.1 %) and carbon content (44 %), resulting in highest energy value of 17.4 MJ kg −1 . Biochar yields ranged from 25.6 % to 35.6 %, with the high ash fraction producing the highest yield and alkalinity (pH ≈ 11.2) due to its higher mineral content. Elemental analysis revealed enhanced carbon content up to 76.9 % and reduced oxygen and hydrogen, confirming effective carbonization. The high lignin-derived biochar showed the highest aromatic carbon content (82.8 %) and greater structural stability, while contaminated and ash-rich fractions exhibited dense, low-porosity surfaces due to the presence of contaminants and minerals. Spectroscopic analysis revealed degradation of carbohydrates, disappearance of cellulose peaks and formation of aromatic and mineral derived phases. The scaled life cycle process yielded a global warming potential (GWP) of 119.3 kg CO 2 -eq per ton of dry paper waste, offset by soil carbon sequestration of − 556.41 kg CO 2 -eq, resulting in a net impact of − 427.36 kg CO 2 -eq. This represents a net carbon removal exceeding by ~186 % the emissions associated with landfilling paper waste with electricity generation.

09 BIOMASS FUELS↗
DOE OSTI2013

A series of 2D metal-quinolone complexes: Syntheses, structures, and physical properties

Six novel 2D metal-quinolone complexes, namely [Cd(cfH)(bpdc)]{center_dot}H{sub 2}O (1), [M(norfH)(bpdc)]{center_dot}H{sub 2}O (M=Cd (2) and Mn (3)), [Mn{sub 2}(cfH)(odpa)(H{sub 2}O){sub 3}]{center_dot}0.5H{sub 2}O (4), [Co{sub 2}(norfH)(bpta)({mu}{sub 2}-H{sub 2}O)(H{sub 2}O){sub 2}]{center_dot}H{sub 2}O (5) and [Co{sub 3}(saraH){sub 2}(Hbpta){sub 2}(H{sub 2}O){sub 4}]{center_dot}9H{sub 2}O (6) (cfH=ciprofloxacin, norfH=norfloxacin, saraH=sarafloxacin, bpdc=4,4 Prime -biphenyldicarboxylate, odpa=4,4 Prime -oxydiphthalate, bpta=3,3 Prime ,4,4 Prime -biphenyltetracarboxylate) have been synthesized and characterized. Compounds 1-3 consist of 2D arm-shaped layers based on the 1D {l_brace}M(COO){r_brace}{sub n}{sup n+} chains. Compounds 4 and 5 display 2D structures based on tetranuclear manganese or cobalt clusters with (3,6)-connected kgd topology. Compound 6 exhibits a 2D bilayer structure, which represents the first example of metal-quinolone complexes with 2D bilayer structure. By inspection of the structures of 1-6, it is believed that the long aromatic polycarboxylate ligands are important for the formation of 2D metal-quinolone complexes. The magnetic properties of compounds 3-6 was studied, indicating the existence of antiferromagnetic interactions. Furthermore, the luminescent properties of compounds 1-2 are discussed. - Graphical abstract: Six novel 2D metal-quinolone complexes have been prepared by self-assemblies of the quinolones and metal salts in the presence of long aromatic polycarboxylates. Highlights: Black-Right-Pointing-Pointer Compounds 1-3 consist of novel 2D arm-shaped layers based on the 1D {l_brace}M(COO){r_brace}{sub n}{sup n+} chains. Black-Right-Pointing-Pointer Compounds 4 and 5 are two novel 2D layers based on tetranuclear Mn or Co clusters with kgd topology. Black-Right-Pointing-Pointer Compound 6 is the first example of metal-quinolone complexes with 2D bilayer structure. Black-Right-Pointing-Pointer Compounds 1-6 represent six unusual examples of 2D metal-quinolone complexes.

36 MATERIALS SCIENCE↗
DOE OSTI2016

A multifunctional chemical sensor based on a three-dimensional lanthanide metal-organic framework

A 3D lanthanide MOF with formula [Sm{sub 2}(abtc){sub 1.5}(H{sub 2}O){sub 3}(DMA)]·H{sub 2}O·DMA (1) has been successfully synthesized via solvothermal method. Luminescence studies reveal that 1 exhibits dual functional detection benzyl alcohol and benzaldehyde among different aromatic molecules. In addition, 1 displays a turn-on luminescence sensing with respect to ethanol among different alcohol molecules, which suggests that 1 is also a promising luminescent probe for high selective sensing of ethanol. - Highlights: • A three-dimensional lanthanide metal-organic framework has been synthesized. • Complex 1 exhibits dual functional detection benzyl alcohol and benzaldehyde among different aromatic molecules. • Complex 1 displays a turn-on luminescence sensing with respect to ethanol among different alcohol molecules.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Protic amine/acid mixtures as solvents for the extraction of aqueous zinc salts: A mechanistic study

In this work, mixtures based on trihexylamine and cyclic carboxylic acids (aromatic and non-aromatic) were used as solvents for the extraction of zinc salts from aqueous phases via liquid–liquid extractions. The anions of the zinc salts were chosen to represent a range of kosmo-/chaotropic characters, and their influence on the extractions was observed. The extraction studies were supplemented by investigation of local liquid structure through small-angle x-ray scattering (SAXS). The results indicate that extraction is strongly influenced by the Hofmeister effect, but the local liquid structure appears insensitive to anion kosmo-/chaotropic character. In contrast to similar extraction studies, the strength of the Hofmeister effect did not change according to the composition of the mixtures.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

A chiral alkali metal capped Ni 4 cubane complex: Synthesis, structure, magnetic and catalytic bromination studies

A new chiral NaO 2 Ni 4 O 2 N 2 cluster has been developed with a distorted capped cubane-type structure. The structure was determined by single crystal X-ray diffraction. The tetradentate Schiff-base ligand was synthesized by the condensation of o-vanillin and $\textit{D}$-(-)–threo-2-amino-1-(4-nitrophenyl)-1,3-propanediol. X-ray structure reveals that the complex possesses a Ni 4 cubane cluster where sodium ion is anchored on the face of the cubane structure. Continuous shape measurement studies revealed that all the Ni centres are in distorted octahedral geometry and sodium ion adopts the spherical square pyramidal geometry. Further structural exploration reveals that the complex shows local distortions of the coordination geometries at each metal site, and these distortions govern the magnetic anisotropy associated with each Ni II ion. For the present case, an elongation ($d_{str}$ > 0) of the octahedral coordination sphere results in a local easy-plane anisotropy, with a positive $D_{Ni(II)}$ parameter. Temperature dependant magnetization measurements showed a predominant ferromagnetic interaction amongst the four Ni centres. This complex is also catalytically active towards bromination of aromatic phenolic compounds. Initial catalytic activity was verified with the conversion of phenol red to bromophenol blue. Different phenolic substances show good conversion to their corresponding bromo derivatives. The complex showed good catalytic activity towards bromination of aromatic phenolic compounds, offering up to 99% conversion with 100% selectively to their corresponding bromo derivatives.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Chemometric modeling of power conversion efficiency of organic dyes in dye sensitized solar cells for the future renewable energy

The present study reports chemometric modeling of power conversion efficiency (PCE) of dye sensitized solar cells (DSSCs) using the biggest available data set till date which comprises around 1200 dyes covering 7 chemical classes. To extract the best structural features required for higher PCE, we have developed multiple partial least squares (PLS) quantitative structure-property relationship (QSPR) models for the Triphenylamine, Phenothiazine, Indoline, Porphyrin, Coumarin, Carbazole and Diphenylamine chemical classes using descriptors derived from the best subset selection method followed by selection of best five models in each dataset based on the Mean Absolute Error (MAE) values. The models were validated both internally and externally followed by the consensus predictions employing “Intelligent Consensus Predictor” tool to examine whether the quality of predictions can be improved with the “intelligent” selection of multiple PLS models. The quality of predictions for the respective external sets showed that the consensus models (CM) are better than the individual models (IM) in most of the cases. From the insights of the developed models, we concluded that attributes like a packed structure toward higher conductivity of electrons, auxiliary donor fragment of aromatic tertiary amines, number of thiophenes inducing the bathochromic shift and augmenting the absorption, presence of additional electron donors, enhancement of electron-donating abilities, number of non-aromatic conjugated C(sp 2 ) which helps as conjugation extension units to broaden the absorption and highly conjugated $π$-systems exert positive contributions to the PCE. On the contrary, features negatively contributing to PCE are the followings: fragments which lower the tendency of localized $π–π*$ transition, fragments related to larger volume and surface area of dyes along with hydrophobicity resulting in poor adhesion, fragment RC = N causing dye hydrolysis, steric hindrance for π electronic mobility, fragments enhancing polarity, etc. Finally, the identified features from the best QSPR model of the coumarin dataset was employed in designing of ten more efficient coumarin dyes (predicted %PCE ranging from 8.93 to 10.62) than the existing ones.

14 SOLAR ENERGY↗
DOE OSTI2017

Alicyclic carboxylic acids in soil humic acid as detected with ultrahigh resolution mass spectrometry and multi-dimensional NMR

It has been well accepted that humic acids in soils comprise both aromatic and aliphatic structural units that harbor mainly oxygenated functional groups such as carboxylic acids, aldehydes, ketones, and hydroxyl groups. Recent mass spectral data obtained from electrospray ionization-Fourier transform ion cyclotron resonance mass spectrometry (ESI-FTICRMS) suggest that the main functional groups in humic acids are carboxylic acids bound to both alicyclic and condensed aromatic molecules. It was suggested that these structural entities originate from oxidation of lignin. To provide additional support, detailed structural characteristics were obtained here using several multi-dimensional nuclear magnetic resonance (NMR) techniques to observe the molecular connectivity of humic acid components, with a focus on carboxylic acids in particular. The humic acid sample examined had been shown to exhibit structural characteristics similar to a larger set of soil humic acids. Here in this study, many carboxylic acid resonances were found to correlate with protons that could be assigned to aliphatic and alicyclic chemical shift regions. Functional groups with heteroatoms such as alcohols, some olefins and an assortment of methyl groups were found to correlate within 2–3 bonds of carboxylic acid groups. The collection of structural components and their proximity to a variety of carboxylic groups supports the occurrence of carboxylated alicyclic molecules as important elements of the aliphatic portion of soil humic acids and a pathway from lignin is consistent with recent findings.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2017

Hydrogenation of organic matter as a terminal electron sink sustains high CO 2 :CH 4 production ratios during anaerobic decomposition

Once inorganic electron acceptors are depleted, organic matter in anoxic environments decomposes by hydrolysis, fermentation, and methanogenesis, requiring syntrophic interactions between microorganisms to achieve energetic favorability. In this classic anaerobic food chain, methanogenesis represents the terminal electron accepting (TEA) process, ultimately producing equimolar CO2 and CH4 for each molecule of organic matter degraded. However, CO2:CH4 production in Sphagnum-derived, mineral-poor, cellulosic peat often substantially exceeds this 1:1 ratio, even in the absence of measureable inorganic TEAs. Since the oxidation state of C in both cellulose-derived organic matter and acetate is 0, and CO2 has an oxidation state of +4, if CH4 (oxidation state -4) is not produced in equal ratio, then some other compound(s) must balance CO2 production by receiving 4 electrons. Here we present evidence for ubiquitous hydrogenation of diverse unsaturated compounds that appear to serve as organic TEAs in peat, thereby providing the necessary electron balance to sustain CO2:CH4 >1. While organic electron acceptors have previously been proposed to drive microbial respiration of organic matter through the reversible reduction of quinone moieties, the hydrogenation mechanism that we propose, by contrast, reduces C-C double bonds in organic matter thereby serving as 1) a terminal electron sink, 2) a mechanism for degrading complex unsaturated organic molecules, 3) a potential mechanism to regenerate electron-accepting quinones, and, in some cases, 4) a means to alleviate the toxicity of unsaturated aromatic acids. This mechanism for CO2 generation without concomitant CH4 production has the potential to regulate the global warming potential of peatlands by elevating CO2:CH4 production ratios.

58 GEOSCIENCES↗
DOE OSTI2025

Synthesis of highly sulfonated 2,6-diphenyl-p-Phenylene oxide: A highly conductive membrane

Highly sulfonated aromatic polymers are desired for the possible highest performance of polymer electrolytes in fuel cells and electrolyzer applications. Here, we reported the method to prepare highly sulfonated 2,6-diphenyl-p-phenylene oxide (SP3O), a commercially available aromatic polymer, with the highest IEC of 4.42 meq/g. Three sulfonation reagents including chlorosulfonic acid (HSO3Cl), concentrated sulfuric acid (conc. H2SO4), and trimethylsilyl chlorosulfonate (TMSCS) were investigated for single and two-step sulfonation reactions. In addition, DMSO-assisted thermal crosslinking method was applied to prepare crosslinked SP3O membranes to improve their mechanical strength and film-forming ability. Proton exchange membrane from crosslinked SP3O displayed a proton conductivity as high as 250 mS/cm at 95 % RH and 60 °C.

Khomein, Piyachai↗
DOE OSTI2016

Probing the antagonistic effect of toluene as a component in surrogate fuel models at low temperatures and high pressures. A case study of toluene/dimethyl ether mixtures

There is a dearth of experimental data which examine the fundamental low-temperature ignition (T < 900 K) behavior of toluene resulting in a lack of data for the construction, validation, and interpretation of chemical kinetic models for commercial fuels. In order to gain a better understanding of its combustion chemistry, dimethyl ether (DME) has been used as a radical initiator to induce ignition in this highly knock resistant aromatic, and its influence on the combustion of toluene ignition was studied in both shock tube and rapid compression machines as a function of temperature (624–1459 K), pressure (20–40 atm), equivalence ratio (0.5–2.0), and blending ratio (100% toluene, 76% toluene (76T/24D), 58% toluene (58T/42D), 26% toluene (26T/74D) and 100% DME). We use several literature chemical kinetic models to interpret our experimental results. For mixtures containing high concentrations of toluene at low-temperatures none of these are capable of reproducing experiment. This then implies an incomplete understanding of the low-temperature oxidation pathways which control its ignition in our experimental reactors, and by extension, in spark- (SI) and compression-ignition (CI) engines, and an updated detailed chemical kinetic model is presented for engineering applications. Model analyses indicate that although the initial fate of the fuel is dominated by single-step H-atom abstraction reactions from both the benzylic and phenylic sites, the subsequent fate of the allylic and vinylic radicals formed is much more complex. Further experimental and theoretical endeavors are required to gain a holistic qualitative and quantitative chemical kinetics based understanding of the combustion of pure toluene, toluene blends, and commercial fuels containing other aromatic components, at temperatures of relevance to SI and CI engines.

30 DIRECT ENERGY CONVERSION↗
DOE OSTI2025

Soot formation and precursor chemistry in Counterflow flames of aviation fuel surrogates

To meet market demands, the aviation sector is interested in utilizing drop-in Synthetic Aviation Turbine Fuels (SATF), either as neat fuels or in blends with conventional Jet A. SATF currently approved in standard specifications may have lower aromatic content with significant fractions of normal, branched, and cyclo-alkanes. Fundamental studies on soot formation from aviation fuels (Jet A, SATF) and their surrogate components are essential to understand how fuel composition influences soot and soot precursor formation. Here, this study reports new measurements of polycyclic aromatic hydrocarbons (PAH) and soot in counterflow diffusion flames (CDFs) of aviation fuel surrogates. Both intrusive and non-intrusive diagnostics are employed to determine the profiles of temperature, gas phase species, PAHs (up to C16), and soot volume fraction (SVF) in CDFs of iso-octane and surrogate mixtures. These measurements shed light on the transition of soot precursors to primary soot particles. In addition to serving as a common surrogate component in Jet A surrogate mixtures, iso-octane is a template species for larger, less volatile branched alkanes found in SATF mixtures. The newly developed Lawrence Livermore National Laboratory (LLNL) PAH and soot model successfully captures temperature, precursor species, and SVF profiles for the mixtures and conditions discussed in this work. Finally, a high-fidelity surrogate for Jet A is proposed that matches targeted physical and chemical properties well, while leveraging the wide range of candidate fuel molecules available in the LLNL detailed chemical model. The proposed surrogate formulation is validated against newly acquired measurements of the surrogate and literature measurements of Jet A. These new experiments and simulations provide critical insights into the PAH and soot formation from aviation fuels. Reaction pathways which require further investigation are highlighted, such that future work may bridge the remaining quantitative gaps in predicting soot formation from aviation fuel surrogates and surrogate components.

Aviation fuels↗
DOE OSTI2024

Molecular shifts in dissolved organic matter along a burn severity continuum for common land cover types in the Pacific Northwest, USA

Increasing wildfire severity is of growing concern in the western United States, with consequences for the production, composition, and mobilization of dissolved organic matter (DOM) from terrestrial to aquatic systems. Our current understanding of wildfire impacted DOM (often termed pyrogenic DOM) composition is largely built from temperature-based studies that can be difficult to extrapolate to field conditions, which are often defined by ‘burn severity’, or the post-wildfire impact observed at a site. Thus, burn severity can encapsulate a broader range of fire and environmental conditions not exclusive to temperature. Biogeochemical studies that describe DOM along burn severity continuums remain limited but are needed to better link DOM composition with field conditions post-fire. Here, in this study, we addressed this need with an experimental open air burn simulation that generated chars from vegetation representative of major land cover types in the western United States. The chars were leached to simulate DOM mobilization potential. The DOM composition was characterized by ultra-high resolution mass spectrometry (HR-MS) and UV/VIS absorbance and fluorescence. Our results indicated that the shifts of DOM production and composition along a burn-severity gradient depends on the land cover type that was burned, with the degree of change dependent on the composition of the starting parent vegetation material. Fluorescence signatures indicated a strong convergence across land cover types to more aromatic DOM with increasing severity, while HR-MS indicated an increase in the production of aromatic nitrogen containing DOM with increasing severity. Results from this study enhance our ability to describe DOM composition in a framework that can be more directly related with field and remote-sensing based metrics.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

Organic amendments change soil organic C structure and microbial community but not total organic matter on sub-decadal scales

Organic C has many benefits for soil, but it is depleted by tillage and crop harvest, and especially so for biofuel crops. Accordingly, strategies such as partially retaining stover or planting a cover crop can help ameliorate the negative effect of C removal. We used a long-term field experiment to study the impacts of stover retention and planting cover crop on soil organic matter (SOM), its extractable components and the soil microbial community. SOM chemical composition characterization was determined by electrospray ionization (ESI) coupled with Fourier transform ion cyclotron resonance mass spectrometry (FT-ICR-MS) in sequential water, methanol (MeOH), and chloroform (CHCl3) extracts. The characteristics of the soil bacterial community were measured by phospholipid fatty acid (PLFA), real-time quantitative PCR, and 16S rRNA gene sequence. The variations in total SOM content, total microbial biomass, and bacterial population were slight among treatments, but SOM chemical compounds, arbuscular mycorrhizal fungi (AMF) biomass, and bacterial structure changed significantly, and especially so in the coupled application of stover retention and cover crop. Specifically, stover retention enriched more lignin-like compounds in soil, whereas cover crop enriched more condensed hydrocarbons, and had more compounds with an aromaticity index (AI) >0.5. The bacterial community was not altered by the cover crop, but the corn stover retention increased the relative abundances of Myxococcales (Deltaproteobacteria) and decreased that of Actinobacteria. Redundancy analysis (RDA) further unveiled that the bacterial community in the stover treatments had significantly positive association with CHCl3-extracted chemical classes, i.e. unsaturated hydrocarbon and lipid with the coupled application (stover and cover crop), and lignin and protein with the single corn stover treatment. Taken together, our study shows how different C addition practices influence the molecular composition of SOM and the structure of soil microbial communities.

Xu, Jiangbin↗
DOE OSTI2014

Effects of van der Waals density functional corrections on trends in furfural adsorption and hydrogenation on close-packed transition metal surfaces

The hydrogenation of furfural to furfuryl alcohol on Pd(111), Cu(111) and Pt(111) is studied with both standard Density Functional Theory (DFT)-GGA functionals and with van der Waals-corrected density functionals. VdW-DF functionals, including optPBE, optB88, optB86b, and Grimme's method, are used to optimize the adsorption configurations of furfural, furfuryl alcohol, and related intermediates resulting from hydrogenation of furfural, and the results are compared to corresponding values determined with GGA functionals, including PW91 and PBE. On Pd(111) and Pt(111), the adsorption geometries of the intermediates are not noticeably different between the two classes of funcfionals, while on Cu(111), modest changes are seen in both the perpendicular distance and the orientation of the aromatic ring with respect to the planar surface. In general, the binding energies increase substantially in magnitude as a result of van der Waals contributions on all metals. In contrast, however, dispersion effects on the kinetics of hydrogenation are relatively small. It is found that activation barriers are not significantly affected by the inclusion of dispersion effects, and a Brensted-Evans-Polanyi relationship developed solely from PW91 calculations on Pd(111) is capable of describing corresponding results on Cu(111) and Pt(111), even when the dispersion effects are included. Finally, the reaction energies and barriers derived from the dispersion-corrected and pure GGA calculations are used to plot simple potential energy profiles for furfural hydrogenation to furfulyl alcohol on the three considered metals, and an approximately constant downshift of the energetics due to the dispersion corrections is observed.

Liu, Bin↗
DOE OSTI2014

A novel assessment of nefazodone-induced hERG inhibition by electrophysiological and stereochemical method

Nefazodone was used widely as an antidepressant until it was withdrawn from the U.S. market in 2004 due to hepatotoxicity. We have investigated methods to predict various toxic effects of drug candidates to reduce the failure rate of drug discovery. An electrophysiological method was used to assess the cardiotoxicity of drug candidates. Small molecules, including withdrawn drugs, were evaluated using a patch-clamp method to establish a database of hERG inhibition. Nefazodone inhibited hERG channel activity in our system. However, nefazodone-induced hERG inhibition indicated only a theoretical risk of cardiotoxicity. Nefazodone inhibited the hERG channel in a concentration-dependent manner with an IC{sub 50} of 45.3 nM in HEK-293 cells. Nefazodone accelerated both the recovery from inactivation and its onset. Nefazodone also accelerated steady-state inactivation, although it did not modify the voltage-dependent character. Alanine mutants of hERG S6 and pore region residues were used to identify the nefazodone-binding site on hERG. The hERG S6 point mutants Y652A and F656A largely abolished the inhibition by nefazodone. The pore region mutant S624A mildly reduced the inhibition by nefazodone but T623A had little effect. A docking study showed that the aromatic rings of nefazodone interact with Y652 and F656 via π–π interactions, while an amine interacted with the S624 residue in the pore region. In conclusion, Y652 and F656 in the S6 domain play critical roles in nefazodone binding. - Highlights: • Nefazodone inhibits hERG channels with an IC{sub 50} of 45.3 nM in HEK-293 cells. • Nefazodone blocks hERG channels by binding to the open channels. • Y652 and F656 are important for binding of nefazodone. • The aromatic rings of nefazodone interact with Y652 and F656 via π–π interactions.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2017

Interleukin-24 as a target cytokine of environmental aryl hydrocarbon receptor agonist exposure in the lung

Exposure to environmental aryl hydrocarbon receptor (AhR) agonists, such as halogenated aromatic hydrocarbons and polycyclic aromatic hydrocarbons (PAHs), has great impacts on the development of various lung diseases. As emerging molecular targets for AhR agonists, cytokines may contribute to the inflammatory or immunotoxic effects of environmental AhR agonists. However, general cytokine expression may not specifically indicate environmental AhR agonist exposure. By comparing cytokine and chemokine expression profiles in human lung adenocarcinoma cell line CL5 treated with AhR agonists and the non-AhR agonist polychlorinated biphenyl (PCB) 39, we identified a target cytokine of environmental AhR agonist exposure of in the lungs. Thirteen cytokine and chemokine genes were altered in the AhR agonists-treated cells, but none were altered in the PCB39-treated cells. Interleukin (IL)-24 was the most highly induced gene among AhR-modulated cytokines. Cotreatment with AhR antagonist completely prevented IL-24 induction by AhR agonists in the CL5 cells. Knockdown AhR expression with short-hairpin RNA (shRNA) significantly reduced benzo[a]pyrene (BaP)-induced IL-24 mRNA levels. We further confirmed that gene transcription, but not mRNA stability, was involved in IL-24 upregulation by BaP. Particulate matter (PM) in the ambient air contains some PAHs and is reported to activate AhR. Oropharyngeal aspiration of PM significantly increased IL-24 levels in lung epithelia and in bronchoalveolar lavage fluid of mice 4 weeks after treatment. Thus, our data suggests that IL-24 is a pulmonary exposure target cytokine of environmental AhR agonists. - Graphical abstract: (A) Cytokine and chemokine gene expressions were examined in CL5 cells treated with AhR and non-AhR agonists. Thirteen cytokines and chemokines genes were altered in the AhR agonist-treated cells, but not in the non-AhR agonist-treated cells. IL-24 was the most highly induced gene among the AhR-modulated cytokines. (B) Both AhR agonists and PM{sub 2.5} induced IL-24 production in the CL5 cells and macrophages. Cotreatment with an AhR antagonist (DMF) or transfections with shRNA for AhR abolished IL-24 induction by BaP in CL5 cells. Intratracheal instillation of PM activated AhR-mediated inflammatory responses and IL-24 expression in mouse lungs. Thus, our data suggests that IL-24 is a pulmonary exposure target cytokine of environmental AhR agonist. - Highlights: • IL-24 is identified as a target cytokine of environmental AhR agonist exposure. • AhR agonists increased IL-24 expression in an AhR-dependent manner in lung cells. • Ambient particulate matter induces IL-24 secretion in BALF in mice. • IL-24 can be used to evaluate environmental lung diseases.

60 APPLIED LIFE SCIENCES↗