Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “1997”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,621 records · Page 90

The Paradox of Filamented Coronal Hole Flow but Uniform High Speed Wind

Plumes and rays in coronal holes are nearly radially aligned density striations that follow the ambient magnetic field. They have long been known, but have gained new interest with growing awareness that coronal hole flow is inherently filamentary. In retrospect, filamentary flow should have been no surprise. This is because,Beta much less than 1 in coronal holes inside approximately 10 Solar radius, allowing the flow to be filamentary down to the smallest scale of photospheric magnetic activity. While the magnetic field itself is locally smooth across any height above ca. 50,000 km, SOHO/MDI has shown that the photospheric magnetic field is a complex array of rapidly evolving small bipoles that are constantly emerging, evolving, and cancelling. The resulting activity is manifested in microflares, concentrated in the magnetic network, that produce Impulsive injections at the footpoints of coronal field lines. The uneven distribution of this activity in space and time is the source of coronal hole filamentation. What is surprising is that the radial flow speed also exhibits filamentary structure. It is not well described as smooth, spherically symmetric, diverging flow, but instead ranges from 300 to over 1000 km/s at 5.5 Solar radius among field-aligned filaments like those seen in plumes and rays [Feldman et al., JGR, Dec. 1997]. This is completely unlike the constant high speed solar wind reported beyond 0.3 AU. Consequently, plumes and filamentary structure must be strongly mixed, and the mixing must be far along by 0.3 AU to be consistent with Helios observations. The paradox is what causes the mixing? Existing models of coronal heating and solar wind acceleration hardly address this issue. One possibility we are investigating is the MHD Kelvin-Helmholtz instability, to which the shear between plumes and interplume corona is expected to become unstable at 5-10 Solar radius. This instability can be simulated and followed far into the nonlinear regime and may lead to Alfvenic fluctuations like those seen at 1 AU.

Suess, Steven T.↗

Turbomachinery Design Quality Checks to Avoid Friction Induced Structural Failure

A unique configuration of the P&W SSME Alternate Fuel Turbopump turbine disk/blade assembly, combined with a severe thermal environment, resulted in several structural anomalies that were driven by frictional contact forces. Understanding the mechanics of these problems provides new quality checks for future turbo machinery designs. During development testing in 1997 of the SSME alternate fuel turbopump at Stennis Space Center, several potentially serious problems surfaced with the turbine disk/blade assembly that had not been experienced in extensive earlier testing. Changes to the operational thermal environment were noted based on analytical prediction of modifications that affected performance and on stationary thermal measurements adjacent to the rotor assembly. A detailed structural investigation was required to reveal the mechanism of distress induced by the change. The turbine disk experienced cracking in several locations due to increased thermal gradient induced stress during start and shutdown transients. This was easily predictable using standard analysis procedures and expected once the thermal environment was characterized. What was not expected was the curling of a piston ring used for blade axial retention in the disk, indentation of the axial face of the blade attachment by a spacer separating the first and second stage blades, and most significantly, galling and cracking of the blade root attachment that could have resulted in blade release. Past experience, in gas turbine environments, set a precedent of never relying on friction for help and to evaluate it only in specific instances where it was obvious that it would degrade capability. In each of the three cases above, friction proved to be a determining factor that pushed the components into an unsatisfactory mode of operation. The higher than expected temperatures and rapid thermal transients combined with friction to move beyond past experience. The turbine disk/blade assembly configuration contributed to the potential for these problems to occur by limiting the radial deflection from thermals and centrifugal loading. The cooled solid bore configuration was chosen to improve rotordynamic stability by limiting the length of rotor overhang while still protecting the roller bearing by maintaining zero slope under the inner race. During a start transient, the rim area of the disk heats rapidly and expands axially and circumferentially and requires corresponding radial and axial growth of the disk to maintain relative positioning of the disk, blades, spacers and retainer rings. The stiffness, large thermal mass, and bore cooling flow combine to severely limit the disk rim radial growth which results in the potential for relative movement between these parts. Friction then becomes a player in the determination of component stress.

Moore, Jerry H.↗

Autonomous Satellite Command and Control through the World Wide Web: Phase 3

NASA's New Millenium Program (NMP) has identified a variety of revolutionary technologies that will support orders of magnitude improvements in the capabilities of spacecraft missions. This program's Autonomy team has focused on science and engineering automation technologies. In doing so, it has established a clear development roadmap specifying the experiments and demonstrations required to mature these technologies. The primary developmental thrusts of this roadmap are in the areas of remote agents, PI/operator interface, planning/scheduling fault management, and smart execution architectures. Phases 1 and 2 of the ASSET Project (previously known as the WebSat project) have focused on establishing World Wide Web-based commanding and telemetry services as an advanced means of interfacing a spacecraft system with the PI and operators. Current automated capabilities include Web-based command submission, limited contact scheduling, command list generation and transfer to the ground station, spacecraft support for demonstrations experiments, data transfer from the ground station back to the ASSET system, data archiving, and Web-based telemetry distribution. Phase 2 was finished in December 1996. During January-December 1997 work was commenced on Phase 3 of the ASSET Project. Phase 3 is the subject of this report. This phase permitted SSDL and its project partners to expand the ASSET system in a variety of ways. These added capabilities included the advancement of ground station capabilities, the adaptation of spacecraft on-board software, and the expansion of capabilities of the ASSET management algorithms. Specific goals of Phase 3 were: (1) Extend Web-based goal-level commanding for both the payload PI and the spacecraft engineer; (2) Support prioritized handling of multiple PIs as well as associated payload experimenters; (3) Expand the number and types of experiments supported by the ASSET system and its associated spacecraft; (4) Implement more advanced resource management, modeling and fault management capabilities that integrate the space and ground segments of the space system hardware; (5) Implement a beacon monitoring test; (6) Implement an experimental blackboard controller for space system management; (7) Further define typical ground station developments required for Internet-based remote control and for full system automation of the PI-to-spacecraft link. Each of those goals is examined in the next section. Significant sections of this report were also published as a conference paper.

Cantwell, Brian↗

Stratospheric Tracers of Atmospheric Transport (STRAT) Campaign: ER-2 Participation

The NASA Stratospheric Tracers of Atmospheric Transport (STRAT) mission was initiated to advance knowledge of the major transport mechanisms of the upper troposphere-lower stratosphere. This is the region of the atmosphere within which exchange processes take place that critically determine the response of the climate system and ozone distribution to changing conditions triggered by the release of chemicals at the surface. The mission series that extended from October 1995 to November 1997 was extremely successful. The scientific advances that emerged from that mission include analyses of: (1) troposphere-to-stratosphere transport in the lowermost stratosphere from measurements of H2O, CO2, N2O, and O3; (2) the effects of tropical cirrus clouds on the abundance of lower stratospheric ozone; (3) the role of HO(sub x) in super- and subsonic aircraft exhaust plumes; and (4) dehydration and denitrification in the arctic polar vortex during the 1995-96 winter. The abstracts from published papers are included.

Anderson, James G.↗

Ground Calibrations of the Clouds and the Earth's Radiant Energy System (CERES) Tropical Rainfall Measuring Mission Spacecraft Thermistor Bolometers

The Clouds and the Earth's Radiant Energy System (CERES) spacecraft scanning thermistor bolometers will measure earth-reflected solar and earth-emmitted,longwave radiances, at the top-of-the-atmosphere. The measurements are performed in the broadband shortwave (0.3-5.0 micron) and longwave (5.0 - >100 micron) spectral regions as well as in the 8 -12 micron water vapor window over geographical footprints as small as 10 kilometers at the nadir. The CERES measurements are designed to improve our knowledge of the earth's natural climate processes, in particular those related to clouds, and man's impact upon climate as indicated by atmospheric temperature. November 1997, the first set of CERES bolometers is scheduled for launch on the Tropical Rainfall Measuring Mission (TRMM) Spacecraft. The CERES bolometers were calibrated radiometrically in a vacuum ground facility using absolute reference sources, tied to the International Temperature Scale of 1990. Accurate bolometer calibrations are dependent upon the derivations of the radiances from the spectral properties [reflectance, transmittance, emittance, etc.] of both the sources and bolometers. In this paper, the overall calibration approaches are discussed for the longwave and shortwave calibrations. The spectral responses for the TRMM bolometer units are presented and applied to the bolometer ground calibrations in order to determine pre-launch calibration gains.

Lee, Robert B., III↗

Sofia Science Working Group

The purpose of this grant was to enable the Principal Investigator (P.I.) to travel to and participate in the meetings and activities of the NASA SOFIA Science Working Group (SSWG), and to spend time working on some of the associated technical issues relating to the SOFIA (Stratospheric Observatory for Infrared Astronomy) project. The SOFIA Science Working Group was established to help develop the plans and specifications for the next-generation airborne observatory ("SOFIA"), which is now under development. The P.I. was asked to serve on the SSWG due to his experience in airborne astronomy: he has developed several astronomical instruments for the Kuiper Airborne Observatory NASA's previous airborne astronomy platform (which was decommissioned in 1995 in preparation for SOFIA). SOFIA, which will be a 747 SP aircraft carrying a 2.7 meter diameter telescope, is a joint project sponsored by NASA and DLR (the German space agency), and is now under development by a consortium including Universities Space Research Association (USRA), Raytheon, Sterling Software, and United Airlines. Further details on the SOFIA project can be found on the internet at http: //sofia. arc. nasa. gov. Rather than develop the SOFIA observatory in-house, NASA decided to privatize the project by issuing a Request for Proposals (RFP). The respondents to this RFP were consortia of private organizations which together had the required facilities and expertise to be able to carry out the project; the winner was the group led by USRA. One of the main roles of the SSWG was to help develop the technical specifications for the SOFIA observatory. In particular, the SSWG provided advice to NASA on the specifications that were written into the RFP, particularly those which had an important impact on the scientific productivity of the observatory. These specifications were discussed at the meetings of the SSWG, which were held primarily at NASA/Ames (in California) and at NASA Headquarters (in Washington DC). Apart from these meetings, members of the SSWG were expected to perform more detailed analyses of the impact of certain parameters and specifications on the performance of astronomical instruments. The SSWG ended its activities with the selection of the USRA team in January 1997.

Zmuidzinas, J.↗

Analysis of Hipparcos Observations

The funds provided in this grant were used to analyze and publish results from Hipparcos observations. The PI was chosen for preferred access to Hipparcos data in 1983 for two programs. Those data, together with the published results in the Hipparcos Catalogue, were used to prepare a talk given at the Hipparcos symposium in Venice in May, 1997. The following papers also were supported by this grant: The Age-Related Properties of the HD 98800 System. HD 98800: A Unique Stellar System of Post-T Tauri Stars. High-Resolution Spectroscopy of Some Very Active Southern Stars. The Problem of Hipparcos Distances to Open Clusters. I. Constraints from Multicolor Main Sequence Fitting. The Problem of Hipparcos Distances to Open Clusters. II. Constraints from Nearby Field Stars.

Soderblom, David↗

Plasma Pressure in the Topside Ionosphere

A previous three year NASA-funded project resulted in the first 2-D maps of magnetotail pressure, density and temperature. A proposal to continue the work was declined, but modest funding was provided for one year to ramp down of the work. During the phase-out year, we used a time when 5 DMSP satellites were simultaneously active to produce the first instantaneous partial image of the magnetotail. The results have been submitted to the proceedings of the 1998 Huntsville Meeting on "The New Millennium Magnetosphere: Integrating Imaging, Discrete Observations and Global Simulations". A method of inferring central plasma sheet (CPS) temperature, density, and pressure from ionospheric observations was developed under a previous 3-year grant. These particles properties are calculated from data taken by particle instruments on DMSP satellites. Ion spectra occurring in conjunction with electron acceleration events are excluded. Because of the variability of magnetotail stretching, mapping to the plasma sheet was done using a modified Tsyganenko 1989 magnetic field model adjusted to agree with the actual magnetotail stretch. On May 25, 1997, five DMSP satellites (F10-F14) passed through the southern hemisphere nightside oval within a 19 minute period. Attached is the first magnetotail image, which results from applying our technique to that data set.

Newell, Patrick T.↗

Five-Hole Flow Angle Probe Calibration for the NASA Glenn Icing Research Tunnel

A spring 1997 test section calibration program is scheduled for the NASA Glenn Research Center Icing Research Tunnel following the installation of new water injecting spray bars. A set of new five-hole flow angle pressure probes was fabricated to properly calibrate the test section for total pressure, static pressure, and flow angle. The probes have nine pressure ports: five total pressure ports on a hemispherical head and four static pressure ports located 14.7 diameters downstream of the head. The probes were calibrated in the NASA Glenn 3.5-in.-diameter free-jet calibration facility. After completing calibration data acquisition for two probes, two data prediction models were evaluated. Prediction errors from a linear discrete model proved to be no worse than those from a full third-order multiple regression model. The linear discrete model only required calibration data acquisition according to an abridged test matrix, thus saving considerable time and financial resources over the multiple regression model that required calibration data acquisition according to a more extensive test matrix. Uncertainties in calibration coefficients and predicted values of flow angle, total pressure, static pressure. Mach number. and velocity were examined. These uncertainties consider the instrumentation that will be available in the Icing Research Tunnel for future test section calibration testing.

Gonsalez, Jose C.↗

The Spectral Evolution of Gamma-Ray Bursts

The proposed project was a continuation of our work on the spectral evolution of gamma-ray bursts begun when the Co-I on this proposal. Lyle Ford, was my graduate student. In the proposal we discussed two projects. The first was finishing and publishing the last chapter of Professor Ford's thesis. In this research effort we looked for correlations in the energies of pairs of counts recorded by the BATSE Spectroscopy Detectors within a short time of each other. A greater correlation within a short time would indicate that the observed broadband spectrum is really composed of narrowband spectral components which last for a short time and which rapidly sum to the observed spectrum. We did not find any evidence for such narrowband emission, and are setting limits on its presence. Professor Ford is revising the last chapter of his thesis for publication with my participation. The second project was a continuation of my study of the cross-correlations between the gamma-ray burst lightcurves in different energy bands. I published a first study with this technique (1997. Ap.J., 486, 928) which showed that "hard-to-soft" spectral evolution is prevalent both within and between the bursts' intensity spikes. I proposed to continue developing this technique. However, I have been somewhat disillusioned about using this methodology quantitatively since it averages the spectral evolution on a given timescale over the entire burst. Nonetheless, I have been applying the technique to new bursts which are scientifically interesting for other reasons. Attached I include the cross-correlations for the burst GRB 990123, the burst during which ROTSE discovered an optical transient. The solid curve is the autocorrelatl'on of BATSE's channel 3 (100-300 keV), while the dashed, dot-dashed and 3 dots-dashed curves are the crosscorrelations of channel 3 with channels 1 (25-50 keV), 2 (50-100 keV), and 4 (300-2000 keV). The order of, and separation between, the curves on the positive lag side indicate "hard-to-soft" evolution on all timescales, while the FWHM of the crosscorrelations shows that the intensity spikes are narrower at high energy than at low energy. I have also been participating with my colleague on the BATSE team on other spectral evolution studies. Note that while I continue as a member of the BATSE team, I no longer receive funding from the team. For example, Preece et al. (1998, Ap.J., 496, 849) showed that the high energy spectral index varies during a burst, usually following a "hard-to-soft" trend. In addition, we have just submitted a catalog (Preece et al. 1999, Ap. J., submitted) of time-resolved spectral fits.

Band, David L.↗

The Clouds and the Earth's Radiant Energy System (CERES) Sensors and Preflight Calibration Plans

The Clouds and the Earth's Radiant Energy System (CERES) spacecraft sensors are designed to measure broadband earth-reflected solar shortwave (0.3-5 microns) and earth-emitted longwave (5- > 100 microns) radiances at the top of the atmosphere as part of the Mission to Planet Earth program. The scanning thermistor bolometer sensors respond to radiances in the broadband shortwave (0.3-5 microns) and total-wave (0.3- > 100 microns) spectral regions, as well as to radiances in the narrowband water vapor window (8-12 microns) region. 'ne sensors are designed to operate for a minimum of 5 years aboard the NASA Tropical Rainfall Measuring Mission and Earth Observing System AM-1 spacecraft platforms that are scheduled for launches in 1997 and 1998, respectively. The flight sensors and the in-flight calibration systems will be calibrated in a vacuum ground facility using reference radiance sources, tied to the international temperature scale of 1990. The calibrations will be used to derive sensor gains, offsets, spectral responses, and point spread functions within and outside of the field of view. The shortwave, total-wave, and window ground calibration accuracy requirements (1 sigma) are +/-0.8, +/-0.6, and +/-0.3 W /sq m/sr, respectively, while the corresponding measurement precisions are +/-O.5% and +/-1.0% for the broadband longwave and shortwave radiances, respectively. The CERES sensors, in-flight calibration systems, and ground calibration instrumentation are described along with outlines of the preflight and in-flight calibration approaches.

Lee, Robert B., III↗

Using the World Wide Web for GIDEP Problem Data Processing at Marshall Space Flight Center

Since April 1997, Marshall Space Flight Center has been using electronic transfer and the web to support our processing of the Government-Industry Data Exchange Program (GIDEP) and NASA ALERT information. Specific aspects include: (1) Extraction of ASCII text information from GIDEP for loading into Word documents for e-mail to ALERT actionees; (2) Downloading of GIDEP form image formats in Adobe Acrobat (.pdf) for internal storage display on the MSFC ALERT web page; (3) Linkage of stored GRDEP problem forms with summary information for access from the MSFC ALERT Distribution Summary Chart or from an html table of released MSFC ALERTs (4) Archival of historic ALERTs for reference by GIDEP ID, MSFC ID, or MSFC release date; (5) On-line tracking of ALERT response status using a Microsoft Access database and the web (6) On-line response to ALERTs from MSFC actionees through interactive web forms. The technique, benefits, effort, coordination, and lessons learned for each aspect are covered herein.

McPherson, John W.↗

Proceedings of the First Annual Symposium for Nondestructive Evaluation of Bond Strength

Quantitative adhesive bond strength measurement has been an issue for over thirty years. Utilization of nonlinear ultrasonic nondestructive evaluation methods has shown more effectiveness than linear methods on adhesive bond analysis, resulting in an increased sensitivity to changes in bondline conditions. Correlation to changes in higher order material properties due to microstructural changes using nonlinear ultrasonics has been shown and could relate to bond strength. Nonlinear ultrasonic energy is an order of magnitude more sensitive than linear ultrasound to these material parameter changes and to acoustic velocity changes caused by the acoustoelastic effect when a bond is prestressed. This increased sensitivity will assist in getting closer to quantitative measurement of adhesive bond strength. Signal correlations between non-linear ultrasonic measurements and initialization of bond failures have been successfully measured. This paper reviews nonlinear bond strength research efforts presented by university and industry experts at the First Annual Symposium for Nondestructive Evaluation of Bond Strength organized by the NDE Sciences Branch at NASA Langley in November 1997.

Roberts, Mark J.↗

Some Recent Observations on the Burning of Isolated N-Heptane and Alcohol Droplets

In a joint program involving Prof F.A. Williams of the University of California, San Diego and Dr. Vedha Nayagam of the National Center for Microgravity Research on Fluid and Combustion, the combustion of liquid fuel droplets having initial diameters between about 1 mm and 6 mm is being studied. The objectives of the work are to improve fundamental knowledge of droplet combustion dynamics through microgravity experiments and theoretical analyses. The Princeton contributions to the collaborative program supports the engineering design, data analysis, and data interpretation requirements for the study of initially single component, spherically symmetric, isolated droplet combustion studies through experiments and numerical modeling. The complementary UCSD contributions apply asymptotic theoretical analyses and are described in the published literature and in a companion communication in this volume. Emphases of the Princeton work are on the study of simple alcohols (methanol, ethanol), alcohol/water mixtures, and pure alkanes (n-heptane, n-decane) as fuels, with time dependent measurements of drop size, flame-stand-off, liquid-phase composition, and finally, extinction. Ground based experiments have included bench-scale studies at Princeton and collaborative experimental studies in the 2.2 and 5.18 second drop towers at NASA-Glenn Research Center. Spacelab studies have included fiber-supported droplet combustion (FSDC) experiments in the Glovebox facility with accompanying numerical analyses. Experiments include FSDC-1, performed on the USML-2 mission in October, 1995 (STS-73) and FSDC-2, on the second flight of the MSL-1 mission in July, 1997 (STS-94).

Dryer, F. L.↗

Reflight of the Solid Surface Combustion Experiment: Flame Radiation Near Extinction

In flame spreading in quiescent and low-velocity opposing flows, effects of surface reradiation and flame radiation are important in establishing the spread rate and whether the flame, once ignited, survives to steady spread or extinguishes after a time long compared to the ignition event. A reflight of the Solid Surface Combustion Experiment (SSCE), supported by modelling, demonstrates that for thick, flat fuels, the ultimate fate of the flame is extinction rather than steady spread. A mismatch between the thermal scale in the gas, driven by radiation, and the species diffusion scale, driven by mass diffusion, develops such that the high temperature regions of the flame are ultimately located in a region to which oxygen cannot be supplied at a sufficient rate to sustain reaction, and extinction occurs. Results of the experiment conducted on Space Shuttle mission STS 85 on 9 August 1997 are reviewed. For the flat surface geometry, while the hydrodynamic phenomena associated with opposed-flow flame spread may be treated two dimensionally, the radiative effects are three dimensional, and so modelling the radiative processes, with the mismatch in dimensionality, is difficult. The cylindrical geometry at least one long compared to the radius, provides a configuration in which the radiative processes for spread in the axial direction are two dimensional, thus simplifying the modelling. The cylindrical geometry allows for the development of more sophisticated radiative models without the complication of dimensionality concerns, e.g., discrete transfer, which is discussed in detail by Bundy (1998). Additionally, the cylindrical geometry results in a "focussing" of the heat transfer to the surface and may allow for steady spread for radii that for thick fuels of the same half-thickness there is no steady spread.

Altenkirch, R. A.↗

Introduction to this Special Issue on Geostatistics and Scaling of Remote Sensing

The germination of this special PE&RS issue began at the Royal Geographical Society (with the Institute of British Geographers)(RCS-IBC) annual meeting in January, 1997 held at the University of Exeter in Exeter, England. The cold and snow of an England winter were greatly tempered by the friendly and cordial discussions that ensued at the meeting on possible ways to foster both dialog and research across "the Big Pond" between geographers in the US and the UK on the use of geostatistics and geospatial techniques for remote sensing of land surface processes. It was decided that one way to stimulate and enhance cooperation on the application of geostatistics and geospatial methods in remote sensing was to hold parallel sessions on these topics at appropriate meeting venues in 1998 in both the US and the UK Selected papers given at these sessions would be published as a special issue of PE&RS on the US side, and as a special issue of Computers and Geosciences (C&G) on the UK side, to highlight the commonality in research on geostatistics and geospatial methods in remote sensing and spatial data analysis on both sides of the Atlantic Ocean. As a consequence, a session on "Ceostatistics and Geospatial Techniques for Remote Sensing of Land Surface Processes" was held at the Association of American Geographers (AAG) annual meeting in Boston, Massachusetts in March, 1998, sponsored by the AAG's Remote Sensing Specialty Group (RSSG). A similar session was held at the RGS-IBG annual meeting in Guildford, Surrey, England in January 1998, organized by the Modeling and Advanced Techniques Special Interest Group (MAT SIG) of the Remote Sensing Society (RSS). The six papers that in part, comprise this issue of PE&RS, are the US complement to such a dual journal publication effort. Both of us are co-editors of each of the journal special issues, with the lead editor of each journal being from their respective side of the Atlantic where the journals are published. The special issue of C&G that constitutes the other half of this co-edited journal series will be published in early 1999, with 3 papers by US authors being published along with 6 papers authored by individuals from the UK and other places in Europe.

Quattrochi, Dale A.↗

Measuring Thermal Characteristics of Urban Landscapes

The additional heating of the air over the city is the result of the replacement of naturally vegetated surfaces with those composed of asphalt, concrete, rooftops and other man-made materials. The temperatures of these artificial surfaces can be 20 to 40 C higher than vegetated surfaces. Materials such as asphalt store much of the sun's energy and remains hot long after sunset. This produces a dome of elevated air temperatures 5 to 8 C greater over the city, compared to the air temperatures over adjacent rural areas. This effect is called the "urban heat island". Urban landscapes are a complex mixture of vegetated and nonvegetated surfaces. It is difficult to take enough temperature measurements over a large city area to characterize the complexity of urban radiant surface temperature variability. However, the use of remotely sensed thermal data from airborne scanners are ideal for the task. In a study funded by NASA, a series of flights over Huntsville, Alabama were performed in September 1994 and over Atlanta, Georgia in May 1997. Analysis of thermal energy responses for specific or discrete surfaces typical of the urban landscape (e.g., asphalt, building rooftops, vegetation) requires measurements at a very fine spatial scale (i.e., <15 m) to adequately resolve these surfaces and their attendant thermal energy regimes. Additionally, very fine scale spatial resolution thermal infrared data, such as that obtained from aircraft, are very useful for demonstrating to planning officials, policy makers, and the general populace, what the benefits are of the urban forest in both mitigating the urban heat island effect, in making cities more aesthetically pleasing and more habitable environments, and in overall cooling of the community. In this presentation we will examine the techniques of analyzing remotely sensed data for measuring the effect of various urban surfaces on their contribution to the urban heat island effect.

Luvall, Jeffrey C.↗

An overview of IACG campaign 4: Solar sources of heliospheric structure observed out of the ecliptic

In 1994, the Inter Agency Consultative Group (IACG), with represenation from ESA, the Japanese Institute of Space and Astronautical Science, the Russian Space Agency, and NASA, initiated a data analysis campaign entitled: 'solar sources of heliospheric structure observed out of the ecliptic' (IACG campaign 4). The primary campaign themes are: the large-scale heliosphere and its dependence on solar photospheric and coronal phenomena; the topology of coronal streamers; the 3D shape of coronal hole boundaries, and solar wind source and acceleration. These themes emphasize the collaborative analysis of remote sensing and in situ data sets for solar features such as coronal holes, coronal mass ejections, and other other solar sources of heliospheric structure. The key observation intervals, covering June 1994 to January 1997, were selected based on the timeline of the unique trajectory of the Ulysses mission. The capabilities and opportunities afforded by the core campaing missions, Ulysses and Yohkoh, and the availability of supportin solar ground observatories and other spacecraft missions, make this campaign of special interest to the solar and heliospheric communities.

Galvin, A. B.↗