Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “worker”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Insulation Activation and Contamination in Low-Power Experiments

Among the diverse advanced nuclear reactor concepts being developed are designs that expect to operate at much higher temperatures than conventional light-water reactors, and therefore require alternative materials for components capable of withstanding these extreme temperatures. Insulation is one such component where alternative high-temperature industrial composites are being considered. Low-power experiments can provide an opportunity for advancing our understanding of material behavior under irradiation; however, these experiments are not without occupational hazards. The focus of this paper is the potential for activation of insulating composites when exposed to neutron fluence during reactor experiments, and to discuss the subsequent contamination of the testing area. This paper will also discuss practical measures for preventing the creation and inhalation of activated particulate matter (i.e., dust), such as engineering and administrative controls and personal protective equipment. This paper evaluates the suitability of several insulation materials for use in reactor experiments based on their activation from neutron irradiation. The materials considered are Pyrogel XTE by Aspen Aerogel, Cerablanket and Kaowool by Morgan Advanced Materials, Thermo-12 Gold by Johns Manville, and Maxsil CF6-2000 by McAllister Mills. Although these materials are not yet widely used in the nuclear industry, they are common in other industries due to their thermal insulating properties. These materials produce dust while handling that can pose health and safety hazards, which could be further exacerbated by activation. The analysis presented in this paper utilizes a deterministic method developed to predict the activation source term of the provided insulation materials. The method calculates the atomic density of each element within the composites and simulates their exposure to a specified neutron flux density representative of low power experimental conditions. During the irradiation phase and throughout the extensive cooling period, neutron absorptions and nuclear decays are tracked for relevant isotopes. The residual activity within each composite is then assessed to identify the material with the lowest potential radiological hazard to workers. Dust will be created during installation and removal of insulating materials and may also be generated during the experiment. Contamination of surrounding surfaces due to dispersion is highly likely unless preventative measures are taken. The results of this analysis are used to estimate an internal dose from inhalation of activated dust, which is significantly lower than the allowable whole-body dose. However, the risk of internal exposure may increase if the dust becomes a transport vector for nuclear material. The goals of this paper are to enhance the understanding of the potential activation and contamination hazards from the use of these insulating materials in low-power nuclear experiments and to foster safer work environments through informed decision-making and strategic planning. This work ultimately contributes to a broader understanding of how new non-nuclear materials for advanced reactors impact the radiological safety of co-located workers, helping to ensure the responsible management of radioactive materials during installation and decommissioning activities.

12 - MGMT OF RADIOACTIVE AND NON-RADIOACTIVE WASTE↗
DOE OSTI2024

Occupational Radiation Exposure Report for Calendar Year 2023

The U.S. Department of Energy Occupational Radiation Exposure Report for Calendar 2023 presents the results of analyses of occupational radiation exposures at the U.S. Department of Energy (DOE), including the National Nuclear Security Administration (NNSA) operations, during calendar year 2023. This report includes occupational radiation exposure data for over 80,000 DOE Federal employees, contractors, and subcontractors as well as members of the public who have worked in or entered controlled areas monitored for exposure to radiation. DOE publishes this annual report to provide DOE Management, Program Offices, workers, health physicists, and other stakeholders an evaluation of DOE-wide performance regarding compliance with Title 10 of the Code of Federal Regulations (CFR) Part 835, Occupational Radiation Protection (10 CFR 835) radiation exposure limits and adherence to as low as reasonably achievable principles. This report provides a discussion regarding radiation protection and exposure reporting requirements. It also includes calendar year (CY) 2023 information and analyses regarding aggregate, individual, site, DOE Program, transient individuals’ dose, as well as a historical review of DOE exposure data. DOE continues to be diligent in protecting its workers and the public from exposure to radiation from DOE operations as illustrated by the results contained in this report.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2024

Tribute to Kenneth Sauer (1931–2022): a mentor, a role-model, and an inspiration to all in the field of photosynthesis

Abstract Kenneth (Ken) Sauer was a mainstay of research in photosynthesis at the University of California, Berkeley and the Lawrence Berkeley National Laboratory (LBNL) for more than 50 years. Ken will be remembered by his colleagues, and other workers in the field of photosynthesis as well, for his pioneering work that introduced the physical techniques whose application have enriched our understanding of the basic reactions of oxygenic photosynthesis. His laboratory was a training ground for many students and postdocs who went on to success in the field of photosynthesis and many others. Trained as a physical chemist, he always brought that quantitative approach to research questions and used several spectroscopic methods in his research. His broad scientific interests concerned the role of manganese in oxygen evolution, electronic properties of chlorophylls, energy transport in antenna complexes, and electron transport reactions. He was also an enthusiastic teacher, an enormously successful mentor who leaves behind a legion of scientists as his abiding legacy, a lover of music and the outdoors with many interests beyond science, and a dedicated family man with a great sense of humility. In this tribute, we summarize some aspects of Ken Sauer’s life and career, illustrated with selected research achievements, and describe his approach to research and life as we perceived it, which is complemented by reminiscences of several current researchers in photosynthesis and other fields. The supporting material includes Ken Sauers’s CV and publication list, as well as a list of the graduate students and postdocs he trained and of researchers that spent a sabbatical in his lab.

Plant Sciences↗
DOE OSTI2026

A catalyst that never rests: Cu/ZnO/Al2O3 under CO2 hydrogenation

For decades, the identity of the active site responsible for carbon dioxide-to-methanol conversion on industrial Cu/ZnO/Al₂O₃ has remained at the center of debate in catalysis. In a recent Nature Catalysis study, Lunkenbein and co-workers use operando transmission electron microscopy to reveal this catalyst in constant motion, cycling between alloyed, oxidized, and encapsulated states as it responds to the competing drives of carbon dioxide activation and hydrogenation.

03 NATURAL GAS↗
DOE OSTI2025

Analysis of semivolatile organics in liquid radioactive residue using sorptive stir bar and solvent back-extraction

Current methods for semivolatiles analysis in radioactive samples can produce large volumes of radioactive solvent residue. A method utilizing stir-bar sorptive extraction has been explored in this work for its applicability to radioactive waste samples. This low solvent analytical method may accelerate remediation, minimize hazardous solvent waste, and reduce exposure risk to workers. Organic compounds (polyaromatic hydrocarbons, chlorinated aromatics, and phenolic compounds) were chosen as surrogates for common Liquid Waste System (LWS) contaminants at Savannah River Site (Aiken, SC). Stir-bar extraction parameters (extraction time, matrix modification, and effective pH range) and solvent back extraction parameters (solvent type, volume, and extraction time) were optimized experimentally for the chosen compounds. Affinity of the stir-bar extraction polymer to radionuclides Cs-137 and Am-241 was observed to determine radionuclide concentration effects. The stir-bar method achieved mean recovery of 100 ± 0.7% (1σ), relative to 114 ± 7% using solvent extraction, while reducing weekly method hands-on time by 93.4% and solvent volume consumption by 99.3%. Sensitivity was improved by 378% in simulated tank waste and 278% in real-world LWS matrix, relative to solvent extraction. This work has produced a safe and optimized method for the low solvent analysis of organics in legacy radioactive tank waste by stir-bar sorptive extraction.

GC-MS↗
DOE OSTI2025

Infrastructure and resource development needs to support a significant expansion of US nuclear capacity

In December 2023, the United States pledged at a United Nations conference to triple nuclear energy by 2050. In May of 2025 a new administration announced plans to quadruple nuclear energy by 2025, setting a new target that requires understanding the key infrastructure and resources needed to achieve large-scale deployment. This study attempts to quantify “what it takes” to deploy an additional 200 GWe of nuclear capacity. It projects demand levels for workforce, fuel, uranium mining and enrichment, waste management, supply chain, land, licensing, and water. Demand growth is also contextualized. For example, the peak number of construction workers required is approximately 215,000, a 37 % increase in the current US utility construction workforce. Up to 80,000 MT/year of mined uranium will be needed, necessitating a 60-fold increase in US mining production or a doubling of global mining if sourced externally. Advanced reactor fuels, uranium mining, and nuclear-grade equipment production would need substantial expansion. Operational workforce, enrichment needs, and licensing submissions also face significant increases. Although water consumption may see relatively lower increases, securing water rights poses unique challenges. This study consolidates various demand metrics in a broad context, highlighting the necessity of early preparations, such as workforce training, to support a tripling of nuclear energy. While it outlines the demand-side requirements, it does not assess the difficulties of ramping up or other supply-side issues. The findings also shed light on the impact of reactor size and reactor technology on various demand metrics.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗
DOE OSTI2025

Unlocking nighttime mobility: Land use and accessibility in public transit for night commuters

Night commuters are integral to urban transportation systems. Essential services such as healthcare and manufacturing rely on workers who travel at night, and reliable mobility options are crucial for them. A gap exists in understanding how land use and accessibility influence public transportation use among night commuters. This study addresses this gap by using public data to explore land use and accessibility factors that affect night commuters' public transportation use in New York State. We investigated (1) the demographic characteristics of night commuters; (2) the influence of land use and accessibility on nighttime public transportation use; and (3) potential improvements to increase public transportation use and their impact. We combined data from the National Household Travel Survey with the Smart Location Database to link home locations with land use characteristics. Using logistic regression, we found that although females are generally less likely to be night commuters, they are more likely to use public transportation. Longer commute distances are associated with higher use of public transportation. Increasing job density along fixed-guideway transit routes and improving overall job accessibility via public transportation significantly enhances public transportation use among night commuters. In conclusion, this research provides actionable insights for public transportation agencies and urban planners to support night commuters, improving access and encouraging nighttime employment.

Job accessibility↗
DOE OSTI2025

Key insights from US Department of Energy Better Plants workforce development bootcamps (2022–2025)

This study examines the effectiveness of the US Department of Energy’s Better Plants Program Bootcamps, which are designed to enhance participants’ technical skills in improving energy efficiency and optimizing operations in manufacturing facilities. Through the analysis of survey data collected from 529 participants across 9 bootcamps, the research investigates the motivations, benefits, and demographic trends of attendees. The findings reveal that skill acquisition and improvement are primary drivers for participation, with key benefits including hands-on training on diagnostic equipment and software tools, networking opportunities, and access to technical resources. The analysis shows strong participation from sectors characterized by high energy consumption and employment, such as chemical and transportation equipment manufacturing. Over 50% of participants have job titles that include “EHS” or “Energy” showing their key roles in leading energy efficiency and energy management efforts in manufacturing. Furthermore, the analysis highlights the distribution of participants across managerial, engineering, and technical roles, revealing a higher representation of managers and engineers. This observation suggests a need for targeted outreach to engage technicians, equipment operators, maintenance staff, and floor workers to ensure comprehensive workforce development. The post-bootcamp survey showed that the participants highly valued the opportunities for peer learning and idea exchange, and the benefits they gained from them. This research contributes to the advancement of manufacturing education by demonstrating the efficacy of specialized training in addressing critical industry challenges and fostering a more competent and empowered workforce.

Energy efficiency↗
DOE OSTI2024

A review of criticality dosimetry at the Y-12 National Security Complex and practical importance of dose accuracy in emergency response

A nuclear criticality results in the emission of both neutron and gamma radiation and can produce doses to personnel near the event that exceed 0.1 Gy (10 rad). The primary purpose of nuclear accident dosimetry is to rapidly identify affected personnel in need of prompt medical treatment and to reassure personnel who have been only minimally exposed. While accurate dosimetry is desired, it must be recognized that dose determinations made from whole-body dosimeters or simple triage methods are very rough estimates and contain significant uncertainties. Even when accounting for factors like varying neutron energy spectra, mean photon energies, body orientation within the radiation field, and transient effects on dosimeter response, etc., the end value is a dosimetric quantity defined for very specific radiological conditions and determined within a simple phantom usually at a single depth. Of more importance is the biological response to the radiation, which will vary by person and can be affected by the individual’s radiation sensitivity, age, gender, mass, and underlying health conditions. The overall biological, person-specific response to a given dose cannot be precisely determined except by patient symptom observation and individual biological dosimetry (e.g. chromosome analysis, lymphocyte ratios, etc.). This work describes and discusses the criticality accident dosimetry program at the Y-12 National Security Complex, a United States Department of Energy National Nuclear Security Administration facility. In conclusion, the primary goals of the Y-12 accident dosimetry program are, among others, the rapid identification of significantly exposed persons, prompt routing of exposed workers for medical evaluation and treatment, and the ultimate processing of dosimeters to assign doses to personnel.

61 RADIATION PROTECTION AND DOSIMETRY↗
DOE OSTI2026

Comparison of the performance of TLD, OSL and RPL personal dosimetry systems to the American National Standard Institute (ANSI) test categories

The Laboratory Accreditation Program (LAP) tests the capability and performance of the United States Department of Energy's (USDOE) facilities to accurately measure and quantify the whole-body and extremity radiation equivalent doses to the occupational workers. The dosimetry methods used in personal dosimetry can be Thermoluminescence (TL), Optically Stimulated Luminescence (OSL) and Radiophotoluminescence (RPL), among other techniques available. Currently, the TL (LiF:Mg,Ti) and OSL (Al 2 O 3 :C) dosimetry systems are DOELAP-accredited for occupational dose measurements and regulatory reporting. In this study, the performance of a beryllium oxide (BeO) OSL dosimetry system and of a silver-doped phosphate glass RPL dosimetry system is compared against the performance of an accredited LiF:Mg,Ti TL dosimetry system. The bias and standard deviation in each of the performance test categories are compared between these three systems for exposures to photons, beta, and mixed radiation fields with the criteria established by the American National Standard Institute (ANSI) and Health Physics Society (HPS) N13.11-2022 standard. The practical implementation of the dosimetry program and its equivalency to the occupational personal equivalent dose H p (0.07) and H p (10) measurements were evaluated. The TL, OSL and RPL dosimetry systems passed the ANSI performance test criteria for H p (0.07) and H p (10) occupational dose measurements and met the DOELAP accreditation requirements.

61 RADIATION PROTECTION AND DOSIMETRY↗
DOE OSTI2024

Funding a Just Transition Away from Coal in the U.S. Considering Avoided Damage from Air Pollution

Abstract Coal is declining in the U.S. as part of the clean energy transition, resulting in remarkable air pollution benefits for the American public and significant costs for the industry. Using the AP3 integrated assessment model, we estimate that fewer emissions of sulfur dioxide, nitrogen oxides, and primary fine particulate matter driven by coal’s decline led to $300 billion in benefits from 2014 to 2019. Conversely, we find that job losses driven by less coal plant and mining activity resulted in $7.84 billion in foregone wages over the same timeframe. While the benefits were greatly distributed (mostly throughout the East), costs were highly concentrated in coal communities. Transferring a small fraction of the benefits to workers could cover these costs while maintaining societal net benefits. Forecasting coal fleet damages from 2020 to 2035, we find that buying out or replacing these plants would result in $589 billion in air quality benefits, which considerably outweigh the costs. The return on investment increases when policy targets the most damaging capacity, and net benefits are maximized when removing just facilities where marginal benefits exceed marginal costs. Evaluating competitive reverse auction policy designs akin to Germany’s Coal Exit Act, we find that adjusting bids based on monetary damages rather than based only on carbon dioxide emissions – the German design – provides a welfare advantage. Our benefit–cost analyses clearly support policies that drive a swift and just transition away from coal, thereby clearing the air while supporting communities needing assistance.

Dennin, Luke R. (ORCID:0000000205405520)↗
DOE OSTI2025

Developing and Implementing Risk-Based Research Safety at Argonne National Laboratory

Facilities operated by the US Department of Energy (DOE) are required to have extensive worker safety and health programs by regulation. Here we describe how Argonne National Laboratory (ANL) has implemented the DOE requirements to bring the Laboratory’s multidisciplinary research risk to an acceptable level to safely execute ANL’s mission to perform cutting-edge research.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Temperature Dependence of 239 Pu NMR Parameters in PuO 2

Solid-state 239 Pu NMR spectra of crystalline PuO 2 have been recorded over temperatures from 11 to 295 K with better than part per thousand resolution. These experiments represent the first independent detection of 239 Pu NMR in PuO 2 since the original report by Yasuoka and co-workers and extend the NMR observations to higher temperatures where recent theoretical explanations of the enigmatic magnetism and electronic structure of PuO 2 may be evaluated. The sensitivity achieved in these experiments was sufficient to measure the sinusoidal dependence of the NMR signal amplitude on the radiofrequency pulse length, which allows the determination of the nuclear g factor and magnetic moment of 239 Pu. These results demonstrate the use of NMR with an open-shell f element to explore subtle magnetic effects in plutonium materials of both technological and scientific significance.

Actinides↗
DOE OSTI2025

DFT calculations and theory do not support enantiospecificity in NMR J-coupling constants

Distinguishing the enantiomers of small organic molecules is an industrially relevant problem with important implications for the health of the population. In a recent publication, Bouchard and co-workers have suggested that large differences in indirect spin-spin (J) coupling constants between enantiomers are possible. A close inspection of their work revealed significant flaws in their density functional theory (DFT) calculations and that the reported effects disappear with appropriate care. We thus conclude that enantiospecificity in spin-spin coupling constants has not be demonstrated either experimentally or theoretically.

Perras, Frédéric A. [Ames Laboratory (AMES), Ames,↗
DOE OSTI2025

Hydra: An AI-Based Framework for Interpretable and Portable Data Quality Monitoring

Hydra is an advanced framework designed for training and managing AI models for near real time data quality monitoring at Jefferson Lab. Deployed in all four experimental halls, Hydra has analyzed over 2 million images and has extended its capabilities to offline monitoring and validation. Hydra utilizes computer vision to continually analyze sets of images of monitoring plots generated 24/7 during experiments. Generally, these sets of images are produced at a rate and quantity that is exceedingly difficult for shift crews to effectively monitor. Significant effort has been devoted to enhancing Hydra’s user interface, to ensure that it provides clear, actionable insights for shift workers and other users. Gradient Weighted Class Activation Maps (GradCAM) provide added interpretability, allowing users to visualize important regions of the image for classification. Hydra has been containerized to enable the creation of portable demos and seamless integration with container-based technologies such as Kubernetes and Docker. With the user interface enhancements and containerization, Hydra can be rapidly deployed for new use cases and experiments. This talk will describe the Hydra framework, its user interface and experience, and the challenges inherent in its design and deployment.

Britton, Thomas [Thomas Jefferson National Acceler↗
DOE OSTI2025

Towards an IPv6-only WLCG: More successes in reducing IPv4

The Worldwide Large Hadron Collider Computing Grid (WLCG) community’s deployment of dual-stack IPv6/IPv4 on its worldwide storage infrastructure has been very successful. Dual-stack is not, however, a viable longterm solution; the HEPiX IPv6 Working Group has focused on studying where and why IPv4 is still being used, and how to flip such traffic to IPv6. The agreed end goal is to turn IPv4 off and run IPv6-only over the wide-area network to simplify both operations and security management.This paper reports our work since the CHEP2023 conference. Firstly, we present our campaign to deploy IPv6 on CPU services and Worker Nodes, with a deadline of end of June 2024. Then, the WLCG Data Challenge (DC24) performed in February 2024 was an excellent opportunity to observe the percentage of data transfers carried by IPv6. We observed the predominance of IPv6 in data transfers during DC24 and were able to understand yet more reasons for the use of IPv4 and areas for remedial action.The paper ends with the working group’s plans for moving WLCG to “IPv6- only”. One aspect of this is the possible automated use of IPv6-only clients configured with a customer-side translator, or CLAT, together with a deployment of NAT64 using what is often known as “IPv6-Mostly”, enabling IPv6-only sites to connect to non-WLCG IPv4-only services.

Attebury, Garhan [U. Nebraska, Lincoln]↗
DOE OSTI2025

Are humans still necessary? Expanding the discussion

The rise of automation, artificial intelligence (AI), and autonomous systems raises important questions about the future role of humans and the field of human factors/ergonomics in workplaces. This paper builds on Dr. Peter Hancock’s 2023 ‘Are Humans Still Necessary?’ article published in the Ergonomics journal. Using a multi-method approach that included a debate, opinion polling, roundtable discussions, and AI queries, the current effort examined the necessity of human involvement in future work environments. Debate team members presented arguments for and against the need for human workers, considering human factors, technology, and socioeconomic factors. Observations indicate that while AI may handle routine tasks, humans will likely remain essential for complex decision making, creativity, and ethical considerations. The paper advocates for viewing workplace dynamics as collaborative human-AI partnerships rather than competition, highlighting the need for a transdisciplinary approach in which human factors/ergonomics professionals play a vital role in enhancing these relationships.

99 - GENERAL AND MISCELLANEOUS↗
DOE OSTI2024

Assessment of Technoeconomic Opportunities in Automation for Nuclear Microreactors

Achieving full decarbonization of all economic sectors remains a challenge, especially in niche markets. For example, remote communities and industrial or mining activities detached from the main electric grid heavily rely on fossil fuels, similar to urban and industrial microgrids with combined heat and power needs. A combination of renewables and energy storage is often not suitable due to cost, reliability, intermittency, and large storage requirements. Small nuclear reactors with a flexible purpose could serve these applications. Microreactors (MR) are a class of reactors that are compact, factory manufactured, transportable, and self-regulating. Typically, they generate much less power than their large reactor counterparts. The main advantages of microreactors include the versatile nature of the energy produced, the reliability of supply, and freedom from having to transport and store large quantities of fuels on-site, coupled with the absence of dependence on an electrical grid. A strong business case is needed to move from the microreactor prototype to the commercialization phase. In fact, fossil fuels are still relatively inexpensive, and in the near term, carbon credits will be available to virtually compensate for emissions. For microreactors, one of the main costs in operation and maintenance (O&M) is their staffing levels. In this study, we investigate how to optimize the number (and thus the cost) of workers, moving from a traditional, fully manned, on-site personnel approach to an unmanned, remote personnel approach. We examine four different staffing models that can be implemented as the technology matures and evolves. We estimate the staffing needs of each model and build a business case to justify the substitution of on-site personnel with adequate technologies. To do so, we propose a cost model to quantify potential cost reductions from automating O&M activities. The model accounts for both the reduction in cost derived from the reduced number of full-time-equivalent (FTE) employees and the increase in cost derived from the need to buy new control hardware as needed. Applying the cost model that we created to different scenarios, an on-site O&M cost reduction exceeding 80% can be expected. Additionally, we found that it is more impactful to focus on automating routine O&M tasks rather than attempting to automate transient management (shutdowns, restarts, monitoring condition deviations). In fact, transients typically account for less than 1% of the total FTE time spent on the reactors.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗