Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “wind potential”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9

Dependence of polar cap potential drop on interplanetary parameters

The convection potential drop across the polar cap is computed from data obtained on high-inclination low-altitude satellites. Potential measurements are correlated with various combinations of parameters measured simultaneously in the upstream solar wind. Most of the potential drop is successfully predicted by merging theory, although a significant background potential drop of 35 kV does not depend on IMF parameters and is attributed to a process other than merging. Results indicate that small values of the IMF are amplified by a factor of 5-10 at the dayside magnetopause, which, when taken into account, improves correlations between IMF parameters and polar cap potential drop. Potential drop is better correlated with IMF parameters than with geomagnetic indices, due to nonlinear response of the magnetosphere affecting geomagnetic activity indices.

Reiff, P. H.↗

Hydrogen Generation Through Renewable Energy Sources at the NASA Glenn Research Center

An evaluation of the potential for generating high pressure, high purity hydrogen at the NASA Glenn Research Center (GRC) was performed. This evaluation was based on producing hydrogen utilizing a prototype Hamilton Standard electrolyzer that is capable of producing hydrogen at 3000 psi. The present state of the electrolyzer system was determined to identify the refurbishment requirements. The power for operating the electrolyzer would be produced through renewable power sources. Both wind and solar were considered in the analysis. The solar power production capability was based on the existing solar array field located at NASA GRC. The refurbishment and upgrade potential of the array field was determined and the array output was analyzed with various levels of upgrades throughout the year. The total available monthly and yearly energy from the array was determined. A wind turbine was also sized for operation. This sizing evaluated the wind potential at the site and produced an operational design point for the wind turbine. Commercially available wind turbines were evaluated to determine their applicability to this site. The system installation and power integration were also addressed. This included items such as housing the electrolyzer, power management, water supply, gas storage, cooling and hydrogen dispensing.

Colozza, Anthony↗

Evaluation of a wind turbine electric power generator

A technical assessment of the aerodynamic performance of the wind wheel turbine (WWT) is reported. The potential of the WWT in utilizing wind as an alternate power source was evaluated. Scaling parameters were developed to predict the aerodynamic performance of WWT prototype sized to produce 3, 9, 30, and 100 kw outputs in a 6.7 m/sec wind.

Swim, W. B.↗

A brief summary of the attempts to develop large wind-electric generating systems in the U.S.

Interest in developing large wind-electric generating systems in the United States was stimulated primarily by one man, Palmer C. Putnam. He was responsible for the construction of the largest wind-power system ever built - the 1250 kilowatt Smith-Putnam wind-electric plant. The existence of this system prompted the U.S. Federal Power Commission to investigate the potential of using the winds as a source energy. Also, in 1933 prior to Putnam's effort, there was an abortive attempt by J. D. Madaras to develop a wind system based on the Magnus effect. These three projects comprise the only serious efforts in America to develop large wind driven plants. In this paper, the history of each project is briefly described. Also discussed are some of the reasons why wind energy was not seriously considered as a major source of energy for the U.S.

Savino, J. M.↗

A brief summary of the attempts to develop large wind-electric generating systems in the US

Interest in developing large wind-electric generating systems in the United States was simulated primarily by one man, Palmer C. Putnam. He was responsible for the construction of the 1250 kilowatt Smith-Putnam wind-electric plant. The existence of this system prompted the U. S. Federal Power Commission to investigate the potential of using the winds as a source energy. Also, in 1933 prior to Putnam's effort, there was an abortive attempt by J. D. Madaras to develop a wind system based on the Magnus effect. These three projects comprise the only serious efforts in America to develop large wind driven plants. In this paper the history of each project is briefly described. Also discussed are some of the reasons why wind energy was not seriously considered as a major source of energy for the U. S.

Savino, J. M.↗

The relation of open magnetic structures to solar wind flow

A study has been made of solar wind observations and models of the low-coronal magnetic field of the sun during the Skylab mission. Potential sources of solar wind plasma have been identified and in most cases systematically associated with observed solar wind flow features. The study pinpoints the problems of associating significant portions of the observed solar wind with sources outside coronal holes, although such associations are strongly suggested by the models. The phenomenological relationship between observed high solar wind speed at 1 AU and small coronal field divergence near the sun is examined and found to be well established but causally inconclusive in light of models of the outer heliosphere.

Levine, R. H.↗

Low-Energy Electron Effects on the Polar Wind Observed by the POLAR Spacecraft

Large ion outflow velocity variation at POLAR apogee have been observed. The observed H+ flow velocities were in the range of 23-110 km/s and 0+ flow velocities were in the range of 5-25 km/s. These velocity ranges lie between those predicted by simulations of the photoelectron-driven polar wind and "baseline" polar wind. The electric current contributions of the photoelectrons and polar rain are expected to control the size and altitude of an electric potential drop which accelerates the polar wind at relatively high altitudes. In this presentation, we compare polar wind characteristics observed near 5000 km and 8 RE altitudes by the Thermal Ion Dynamics Experiment (TIDE) with measurements of low-energy electrons sampled by HYDRA, both from the POLAR spacecraft, to examine possible effects of the polar rain and photoelectrons on the polar wind. Both correlations and anti-correlations are found between the polar wind velocities and the polar rain fluxes at POLAR apogee during different polar cap crossings. Also, the low-altitude upward/downward photoelectron spectra are used to estimates the potential drops above the spacecraft. We interpret these observations in terms of the effects that both photoelectrons and polar rain may have on the electric potential and polar wind acceleration along polar cap magnetic field lines.

Horwitz, J. L.↗

Transport of N2O in the stratosphere related to the equatorial semiannual oscillation

The double-peak structure observed in the distribution of N2O during the spring equinoctial condition is studied by means of a 2D time-dependent tracer model. The meridional transport circulation is determined from computed diabatic heating rates, and the horizontal eddy diffusion coefficients are computed as residuals by potential vorticity conservation, using observed mean winds to compute the budget of zonal mean potential vorticity. This model is used to predict the 30-d evolution of the observed N2O field. The integrated results are generally in good agreement with observed tracer fields up to the midstratosphere. It is proposed that standard climatologies underestimate the strength of the equatorial semiannual oscillation in the zonal mean wind and temperature fields.

Choi, Woo Kap↗

Using Wind Observations from Nearby Aircraft to Update the Optimal Descent Trajectory in Real-Time

The ability to meet a controlled time of arrival during a continuous descent operation will enable environmentally friendly and fuel efficient descent operations while simultaneously maintaining airport throughput. However, if the wind forecast used to compute the initial trajectory plan is not accurate enough, the guidance system will need to correct time deviations from the plan during the execution of the descent. Previous work proposed an on-board guidance strategy based on model predictive control, which repeatedly updates the trajectory plan in real-time from the current aircraft state and for the remainder of the descent. However, the wind conditions downstream, at altitudes not explored yet, were difficult to predict due to the lack of data. This paper shows the potential benefits of using wind observations, broadcast by nearby aircraft, to reconstruct the wind profile downstream. The wind profile in the trajectory optimization problem is modeled as a spline, which control points are updated to fit the observations before re-planning the trajectory. Results from simulations using realistic wind data show that the performance of model predictive control significantly improves when including up-to-date wind observations, in terms of time and energy errors at the metering fix and fuel consumption.

Dalmau, Ramon↗

Sources of mesoscale variability of gravity waves. I - Topographic excitation. II - Frontal, convective, and jet stream excitation

The effect of topography as a source of mesoscale variability was investigated using aircraft measurements of winds and temperature collected during the Global Atmospheric Sampling Program, with results showing marked increases in the variance of zonal and meridional wind speeds and of potential temperature over rough terrain. In addition, four cases of mesoscale variance enhancements of horizontal velocity and temperature due to frontal activity, nonfrontal convection, and wind shear were studied. The implications of these episodic enhancements of variances for the vertical transports of energy and momentum are considered in the framework of the gravity wave theory.

Nastrom, Gregory D.↗

SSM/I and ECMWF Wind Vector Comparison

Wentz was the first to convincingly show that satellite microwave radiometers have the potential to measure the oceanic wind vector. The most compelling evidence for this conclusion was the monthly wind vector maps derived solely from a statistical analysis of Special Sensor Microwave Imager (SSM/I) observations. In a qualitative sense, these maps clearly showed the general circulation over the world's oceans. In this report we take a closer look at the SSM/I monthly wind vector maps and compare them to European Center for Medium-Range Weather Forecasts (ECMWF) wind fields. This investigation leads both to an empirical comparison of SSM/I calculated wind vectors with ECMWF wind vectors, and to an examination of possible reasons that the SSM/I calculated wind vector direction would be inherently more reliable at some locations than others.

Wentz, Frank J.↗

Design and Development of a Deep Acoustic Lining for the 40-by 80-Foot Wind Tunnel Test Section

The work described in this report has made effective use of design teams to build a state-of-the-art anechoic wind-tunnel facility. Many potential design solutions were evaluated using engineering analysis, and computational tools. Design alternatives were then evaluated using specially developed testing techniques, Large-scale coupon testing was then performed to develop confidence that the preferred design would meet the acoustic, aerodynamic, and structural objectives of the project. Finally, designs were frozen and the final product was installed in the wind tunnel. The result of this technically ambitious project has been the creation of a unique acoustic wind tunnel. Its large test section (39 ft x 79 ft x SO ft), potentially near-anechoic environment, and medium subsonic speed capability (M = 0.45) will support a full range of aeroacoustic testing-from rotorcraft and other vertical takeoff and landing aircraft to the take-off/landing configurations of both subsonic and supersonic transports.

Soderman, Paul T.↗

A System for Measuring the Sway of the Vehicle Assembly Building

A system was developed to measure the sway of the Vehicle Assembly Building (VAB) at Kennedy Space Center. This system was installed in the VAB and gathered more than one total year of data. The building movement was correlated with measurements provided by three wind towers in order to determine the maximum deflection of the building during high-wind events. The VAB owners were in the process of obtaining new platforms for use in assembling very tall rockets when analysis of the VAB showed that a high wind could move the building sufficiently that an upper platform might impact a rocket. The problem arises because safety requires a relatively small gap between the platform and the rocket, while a large enough gap is needed to ensure that stacking tolerances prevent contact between the rocket and the platform. This only leaves an inch or two (approximately 2 to 5 cm) of total clearance, so when the analysis showed that more than a couple of inches of motion could occur in a high wind, there was a potential for damaging the rocket. The KSC Applied Physics Laboratory was asked to install a system in the VAB that could measure the motion of the building in high winds to determine the actual building sway. The motion of the VAB roof under wind load was measured optically, and under analysis, it was determined that a relatively large-aperture optical system would be required to reduce diffraction effects to less than a small fraction of an inch (approximately mm) at a distance of 500 ft (≈150 m). A 10-in. (approximately 250 mm) telescope was placed on the floor of the building, looking at the ceiling. On the ceiling, a flat plate with three white LEDs was mounted in an "L" shape, such that the telescope was essentially looking at three stars. Software was written to track the motion of these three points using an image processing system. This provided a better than 1/10-in. (approximately 2.5-mm) 2D measurement faster than once a second. Data was downloaded once a month for comparison with the wind tower data. The system was fully operational and provided enough data to show that the VAB will only move 1 in. (approximately 2.5 cm) at the ceiling under 70-knot winds. Adjustable platforms are not required.

Youngquist, Robert↗

Small UAV Flight Planning in Urban Environments

This work proposes a fast algorithm for generating obstacle-free and wind-efficient flight paths at a constant above-ground-level altitude in urban environments because a fast flight path planning algorithm is an essential function or service needed for enabling small unmanned aerial vehicle (sUAV) to operate in urban environments within Class G airspace. The proposed method first converts the 3D path planning problem to a 2D problem by constructing an obstacle map at a given above-ground-level altitude. A quad-tree decomposition is then used to build a search space in terms of obstacle occupancy and wind difference. The wind cost of traveling through each cell is defined based on energy consumption under various wind conditions. A repulsive potential is also adopted to make sure that the flight plans stay away from obstacles. The Theta* search algorithm, a variant of A* algorithm, is applied to mitigate the path angle change constraints introduced by grid-based graphs. With the Theta* and postsmoothing techniques, an obstacle-free, wind efficient, and constant above-ground-level flight plan can be quickly generated for sUAV operations in urban environments while meeting the lateral path angle constraints. The results showed that the path planning algorithm is efficient and can be finished within several seconds. With a proper choice of wind coefficient, the proposed path planning algorithm outperforms the multiple-shooting trajectory optimization method even in an obstacle-free environment. With the flexibility of incorporating other geo-related costs and computation efficiency, the proposed algorithm shows the potential for real-time flight path planning in complex urban environments.

Path planning↗

The useful potential of using existing data to uniquely identify predictable wind events and regimes, part 2

Wind data from four sites were stratified and found to naturally fit into a few unique groups. These were compared with synoptic weather patterns using the Booz-Allen classification system. Strong relationships became evident between a particular synoptic type and wind events for each site. Statistics indicate certain patterns which result in strong winds and some that result in weak winds. For each site there is a preferred wind direction associated with the strongest speed. Important relationships were also found comparing 850-mb and surface wind. Additionally, comparisons between pressure gradient and wind speed for a given gradient direction show some significant relationships. It can be stated that the overall results show what by using existing data for any site, the winds can be characterized and correlated with synoptic weather patterns. As a result, reliable wind forecasts can be made for utility companies for the purpose of power generation.

Notis, C.↗

Potential errors in using one anemometer to characterize the wind power over an entire rotor disk

Wind data collected at four levels on a 90-m tower in a prospective wind farm area are used to evaluate how well the 10-m wind speed data with and without intermittent vertical profile measurements compare with the 90-m tower data. If a standard, or even predictable, wind speed profile existed, there would be no need for a large, expensive tower. This cost differential becomes even more significant if several towers are needed to study a prospective wind farm.

Simon, R. L.↗

Potential advantages of the spaced antenna method for operational wind profiling, part 3.1B

The problem of very short-range forecasting is twofold. It is necessary to understand the processes that are being forecasted, and data appropriate to the scale of interest has to be generated. Coherent VHF and UHF radars are being used for operational wind profiling and are providing part of the solution to the data-acquisition problem. The Profiler system operated by the Wave Propagation Laboratory at NOAA has already shown great promise. As a result, plans are being considred for expanding the network of radars to cover a larger area of the country. The Profiler uses what is commonly referred to as the Doppler method for measuring winds. Two beams are pointed off-vertical, and the Doppler shift of the echo determines the line-of-sight velocity. The velocity components along the beams are then translated to horizontal wind components. A number of possible advantages of the spaced antennas (SA) method for operational wind profiling are discussed.

Rottger, J.↗