Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “water use”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9

Coupling Waste Feedstocks to Microbial Protein for a Circular Food System

The global food system is responsible for approximately 34% of annual greenhouse gas (GHG) emissions and up to 85% of water consumption. This critical sector suffers from intensive and inefficient land and water use, the generation of multiple (solid, liquid, and gaseous) waste streams, and high fuel, fertilizer, and pesticide consumption. The production of waste-derived microbial protein (MP) represents a promising alternative for reducing the environmental impacts of protein production relative to conventional agriculture. MP can be mass-produced in volumetrically scalable cultivation processes on short timescales, enabling facile up-scaling with lower greenhouse gas emissions, land use, and water impacts than animal and, in some cases, plant protein production. MP can also be produced from waste feedstocks, diverting waste from landfills or the natural environment. Here, we present the availability and suitability of waste feedstocks for MP production, as well as the fermentation and downstream processes required to convert MP into human food products. We discuss the challenges and opportunities facing waste-derived bacterial MP and highlight key areas for innovation in both the microbiology and process design space for a more sustainable and circular food system.

BASIC BIOLOGICAL SCIENCES,ENERGY PLANNING, POLICY,↗

Impacts of Riparian and Non-riparian Woody Encroachment on Tallgrass Prairie Ecohydrology

Woody encroachment has impacted grassland ecohydrology worldwide, prompting management strategies aimed at woody vegetation removal to prevent or mitigate loss of water yield. For this work, we measured stream discharge following sustained cutting of riparian trees (2010–2020) in a native tallgrass prairie (northeastern Kansas, USA). Discharge has declined at this site since the 1980’s despite a concurrent increase in precipitation. This decline has been previously attributed to increased transpiration of stream water by riparian vegetation. We used water stable isotopes (δ 18 O and δ 2 H) to determine whether riparian grasses, shrubs, and trees primarily used stream/groundwater or soil water. Additionally, we quantified the increase in riparian and non-riparian woody cover (1978–2020) and combined it with sap-flux data to estimate changes in transpirative water loss. Sustained cutting of riparian trees did not result in increased discharge. Rather than stream/groundwater, the largest proportion of water used by riparian trees (Quercus spp.) was deep soil water. Cornus drummondii (clonal woody shrub) used a higher proportion of stream water and had greater overall variability in water-use. Riparian shrub cover increased about 57% from 1978 to 2020. Over the same time period, shrub cover increased about 20% in areas outside the riparian zone, resulting in an estimated 25% increase in daily transpirative water loss. Although stream water use was less than 50% for all riparian zone species, the total increase in shrub cover on this watershed, coupled with higher transpiration rates of shrubs, suggests that these woody species—within and outside the riparian zone—are key contributors to observed declines in stream flow in this system.

54 ENVIRONMENTAL SCIENCES↗

A Comparison of Homogeneous and Heterogeneous Uranium Metal-Water Systems using Calculated and Experimental Critical Data

Heterogeneous effects of fissile units latticed in water has been documented in several forms in commonly referenced handbooks and guides. Many of these documents provide guidance for when heterogeneous systems are more reactive than their homogenous counterparts if controlling fissile mass or volume. This information provides insight into when heterogeneity should be considered for conservatism, however this information is not always displayed in a manner that is comparable to commonly referenced data, such as critical curves based on spherical systems. This paper aims to provide a juxtaposition of homogenous and heterogeneous uranium metal-water systems using both experimental and calculated critical data displayed in the format of commonly referenced critical curves. This format allows for easy comparison between the two systems against parameters that are often considered for single unit analysis such as: uranium density, fissile mass, system volume, and total system mass (fissile mass plus moderator mass). Calculated critical spherical systems provide an equal comparison between latticed geometry types as the latticed array can be cut off or restricted in the same manner in each series of models, which is not true for experimental values. Additionally, enrichment of the latticed units can be made uniform in the calculated systems, which is also difficult to achieve when referencing experimental data of varying latticed geometries. A comparison of calculated critical values and available experimental values is provided to show how these parameters can impact the critical spherical system result.

36 MATERIALS SCIENCE↗

A Comparison of Homogeneous and Heterogeneous Uranium Metal-Water Systems using Calculated and Experimental Critical Data

Heterogeneous effects of fissile units latticed in water has been documented in several forms in commonly referenced handbooks and guides. Many of these documents provide guidance for when heterogeneous systems are more reactive than their homogenous counterparts if controlling fissile mass or volume. This information provides insight into when heterogeneity should be considered for conservatism, however this information is not always displayed in a manner that is comparable to commonly referenced data, such as critical curves based on spherical systems. This paper aims to provide a juxtaposition of homogenous and heterogeneous uranium metal-water systems using both experimental and calculated critical data displayed in the format of commonly referenced critical curves. This format allows for easy comparison between the two systems against parameters that are often considered for single unit analysis such as: uranium density, fissile mass, system volume, and total system mass (fissile mass plus moderator mass). Calculated critical spherical systems provide an equal comparison between latticed geometry types as the latticed array can be physically cut off or restricted in the same manner in each series of models, which is not true for experimental values. Additionally, enrichment of the latticed units can be made uniform in the calculated systems, which is difficult to achieve when referencing experimental data of varying latticed geometries. A comparison of calculated critical values and available experimental values is provided to show how these parameters can impact the critical spherical system result.

36 MATERIALS SCIENCE↗

Parametric Studies of Heat Pump Water Heater Using Low GWP Refrigerants

A storage heat pump water heater (HPWH) comprises a vapor compression system and a hot water tank. It can lead to more than 70% energy saving, compared with electric resistance heating. HPWH usually uses a wrapped-tank coil as the water heater. The wrapped coil has a strong interaction with the water tank and impose a new challenge for the engineering design and simulation study. Based on the US DOE/ORNL Heat Pump Design Model (HPDM), i.e., a public-domain, component-based thermal system modelling platform, a segment-to-segment wrapped-tank coil model coupled with a one-dimensional stratified water tank model were developed, which facilitates modeling and design HPWHs having various configurations and components. Additionally, the hardware-based design model was used to evaluate refrigerants having lower global warming potentials to replace R-134a, including R-1234yf, R-1234ze, R-290, R-513A and R-450A, when effects of compressor size, refrigerant charge on 24-hour uniform energy factor (UEF) and first-hour rating (FHR) were investigated.In the drop-in replacements, R-1234ze achieved the best UEF, and R-290 resulted in the lowest UEF. When downsizing the compressor to maximize the UEFs, the UEFs of R-134a, R-290, R1234yf, R-450A and R-513A ascended to the range of 4.4 to 4.53, with R-513A having the highest UEF. The R-1234ze ended up having the lowest UEF of 4.27. Refrigerants having larger volumetric vaporization heat led to higher FHRs if using the fixed-size compressor, that R-290 resulted in the highest FHR.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Molecular-level understanding of gibbsite particle aggregation in water

Using molecular dynamics simulations, we investigate the molecular scale origin of crystal face selectivity when one gibbsite particle attaches to another in water. A comparison of the free energy per unit surface area of particle–particle attachment indicates that particle attachment through edge surfaces, where the edge surfaces are either (1 0 0) or (1 1 0) crystal faces, is more energetically favorable compared to attachment between two basal surfaces (i.e., (0 0 1) crystal faces) or between the basal surface of one particle and the edge surface of another. This result suggests that gibbsite crystals with low basal/edge surface area ratio will preferentially attach through edge surfaces, potentially helping the crystals grow laterally. However, for larger gibbsite particles (high basal/edge surface area ratio) the total free energy, not normalized by surface area, of particle attachment through the basal surfaces is lower (more negative) than attachment through the edge surfaces, indicating that larger gibbsite particles will preferentially aggregate through basal surface attachments. The short-range electrostatic interactions including the interparticle hydrogen bonds from surface –OH groups drive particle attachment, and the dominant contribution to the free energy minimum is enthalpic rather than entropic. However, the enthalpy of basal-edge attachment is significantly offset by the entropy leading to a higher free energy (less negative) compared to that of basal-basal attachment. Study of the free energy for a few imperfect attachments of two particles indicates a higher free energy (i.e., less negative, less stable), compared to a perfect attachment

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Improving Discovery, Sharing, and Use of Water Data: Initial Findings and Suggested Future Work

Collaborative management of water resources requires a broad suite of “water data” that extends beyond basic information about water quantity and quality to other related topics such as water infrastructure, aquatic ecosystem health, socioeconomic factors, and power generation. Water data are disparate in nature because they are collected and provided by many entities, and in some cases, remain challenging to access and use. The U.S. Department of Energy’s Water Power Technologies Office initiated a project to characterize relevant categories of water data; describe the current state of accessing, using, and visualizing water data; and outline investigatory pathways for future efforts aimed at improving the discovery, sharing, and use of water data. Input on these topics was solicited from a small but diverse cross section of members of the water resources community. Fourteen broad categories of water data were identified: dams; ecology; flood control; hydroclimatology; hydrography; hydrology; hydropower; management landscape; migratory barriers; recreation and aesthetic importance; socioeconomic; water quality; water availability and use; and weather. Stakeholder perspectives on the accessibility and usability of water data indicate these aspects are affected by a complex set of technical and social factors. However, stakeholders generally agreed that better access to water data can provide a range of benefits to water management, and they stressed the need to generate broad support from water data users and producers. Two investigatory pathways were outlined that, taken together, provide a logical progression toward the goals of the project. The first pathway emphasizes further investigation to better define target audiences and data needs, identify opportunities for collaboration between related efforts, and conduct value demonstration activities to generate further support for improving discovery and access of water data. The second pathway focuses on creating a comprehensive vision for potential solutions that improve the discovery of water data. Several activities that align with the first pathway are suggested for the next phase of the project.

13 HYDRO ENERGY↗

Geographically Dependent Sustainability Indicators for Comparison of Conventional Vegetable Production to Controlled-Environment Agriculture

Many food system lifecycle analyses distill agricultural production and supply chain impacts into single-value sustainability metrics for various food categories. These studies provide an overview of the food supply system that highlight striking results such as the GHG impacts of meat production. The supply chain impacts of vegetable production occupy the middle ground; higher than average food loss and waste, lower than average overall energy use, etc. However, aggregated results obscure the sustainability implications of the location of food production, especially for vegetables. Moreover, the increasing instability of food production systems are not captured, as illustrated by a recent Washington Post article. According to a UC Merced study conducted for the state, California farmers left nearly 400,000 acres of agricultural land unplanted last year because of a lack of water. The result, the study found, was a direct economic cost to farmers of $1.1 billion and the loss of nearly 9,000 agricultural jobs. (The Washington Post, March 21, 2022.) Previous work quantified the food-energy-water nexus implications of transitioning vegetable production from large, centralized agricultural operations to smaller distributed production in controlled-environment farms (CEA). The importance of location-specific data is especially evident for water use. Water impacts of the food system are primarily local to the region where food is produced, water impacts vary significantly between locations, and water stress is a major concern in locations that currently host large agricultural operations. Location-specific data is needed to accurately assess the water impacts of transitioning to CEA. The location of farms in relation to consumers impacts transportation energy use, food loss and waste, and requirements for food processing (e.g., to reduce weight, preserve foods for long storage, and package foods to reduce damage and loss) Reducing transport is particularly relevant for agricultural products that could be grown in CEAs (fruits, vegetables, protein). Access to nutritious food is not evenly distributed in the population. Remote communities, communities in harsh environments, and economically-disadvantaged communities often have poor access to healthy foods. CEA is ideally suited to these environments. However, the energy and water use of CEA, while in many respects lower overall than conventional supply chains, are concentrated within communities and could have significant local impacts. This paper reports on development of sustainability metrics that seek to capture the tradeoffs between the current supply chain and a CEA supply chain for vegetables; focusing on the location-dependent implications of water use, the transition from largely fossil fuel based energy use to electricity, and the food access, resilience and wellbeing implications of urban versus rural food production.

controlled-environment agriculture↗

2019 ASHRAE Handbook: HVAC Applications - Chapter 37 - Energy Use and Management

Handbook is a highly-regarded engineers reference book for heating, ventilating, air conditioning, and energy engineers. Building energy and water use metrics were developed for 53 commercial and residential building types. Supporting narrative was drafted and provided along with multiple tables of building performance metrics for publication in this ASHRAE handbook. ORNL (T. Sharp) developed the building performance metrics in Tables 2, 3, and 4 and authored the narrative about them. T. Sharp also authored the section on "Benchmarking Water Use" and developed building water use metrics published in Table 5.

Sharp, Terry↗

Beneficiation of coal using supercritical water and carbon dioxide extraction: sulfur removal

Abstract This work explores the use of carbon dioxide, water, and their mixtures as solvent for the precombustion beneficiation of raw coal without using any toxic mineral acids in the temperature range of 200–400 °C. The fluid polarity, ionic constant, and supercritical point can be adjusted by H 2 O/CO 2 ratio and temperature. Adding carbon dioxide to hydrothermal fluid also increases the ionization by forming carbonic acid. Extractions with supercritical fluids have several benefits including enhanced mass transport, ease of separation and recycle, wide range of extractive capability and tunability, better inherent safety, and in the case of carbon dioxide and water–low cost. A semi-continuous extraction system was designed and built in which pressure, temperature and the relative flow rates of CO 2 and H 2 O can be controlled. Coal powder is kept in a packed bed and the extraction is carried out at 143 bar pressure. Using sulfur as a model heteroatom, extractive efficiency is examined as a function of the temperature, fluid composition, fluid flow, and extraction time. The results indicate that carbon dioxide, water, and supercritical water-carbon dioxide (ScWC) all can effectively extract about 50% of total sulfur from bituminous coal in 1 h. Extraction above 350 °C decreased effectiveness, and extraction above the supercritical point of pure water caused hydrothermal carbonization. ScWC extraction may provide necessary control to prevent organic dissolution while removing sulfur.

DeCuir, Matthew J.↗

Porous Polymer Structures with Tunable Mechanical Properties Using a Water Emulsion Ink

Recently, the manufacturing of porous polydimethylsiloxane (PDMS) with engineered porosity has gained considerable interest due to its tunable material properties and diverse applications. An innovative approach to control the porosity of PDMS is to use transient liquid phase water to improve its mechanical properties, which has been explored in this work. Adjusting the ratios of deionized water to the PDMS precursor during blending and subsequent curing processes allows for controlled porosity, yielding water emulsion foam with tailored properties. The PDMS-to-water weight ratios were engineered ranging from 100:0 to 10:90, with the 65:35 specimen exhibiting the best mechanical properties with a Young’s Modulus of 1.17 MPa, energy absorption of 0.33 MPa, and compressive strength of 3.50 MPa. This led to a porous sample exhibiting a 31.46% increase in the modulus of elasticity over a bulk PDMS sample. Dowsil SE 1700 was then added, improving the storage capabilities of the precursor. The optimal storage temperature was probed, with -60 °C resulting in great pore stability throughout a three-week duration. The possibility of using these water emulsion foams for paste extrusion additive manufacturing (AM) was also analyzed by implementing a rheological modifier, fumed silica. Fumed silica’s impact on viscosity was examined, revealing that 9 wt% of silica demonstrates optimal rheological behaviors for AM, bearing a viscosity of 10,290 Pa·s while demonstrating shear-thinning and thixotropic behavior. This study suggests that water can be used as pore-formers for PDMS in conjunction with AM to produce engineered materials and structures for aerospace, medical, and defense industries as sensors, microfluidic devices, and lightweight structures.

36 MATERIALS SCIENCE↗

Well Stimulation Treatment in California: Evaluation of Disclosure Data, May 2015 – October 2019

In this document, disclosure data from 1,228 well stimulations occurring May 2015 to October 2019 in California are evaluated. This evaluation updates a previous study that was based on 618 well stimulations occurring May 2015 to June 2016 (Stringfellow, W.T., Camarillo, M.K., and Jordan, P. 2017, Status of Well Stimulation in California Since Implementation of SB-4 Regulations, Berkeley National Laboratory, Berkeley, CA). While the goal of the previous study was to provide a summary of information obtained since passage of California Senate Bill No. 4—Oil and Gas, the goal of the current evaluation is to provide a basis for studying chemical indicators that could potentially be used to detect aquifer contamination. We evaluate chemical indicators is a separate document using the data contained herein as well as data from monitoring wells located within oil fields. Compared with the data used by Stringfellow et al. 2017, the current evaluation is based on a more diverse data set. While the previous study contained data for only two oil fields with more than 30 well stimulations, the current data set contains four oil fields with more than 30 well stimulations, making these data more ideal for comparisons using statistical tests. More producers and a new oil field, Buena Vista Nose, are represented in the current data set. Some well stimulation practices remain relatively unchanged since the previous study. Well stimulation is mostly occurring in Kern County with the exception of a single well stimulation in Orange County. Almost all well stimulations are hydraulic fracturing. The current data set contains two acid fracturing treatments and one matrix acidizing treatment. The median number of chemicals added per well stimulation—excluding water and proppant—was previously 21; the number in the expanded data set is 20. Median water added per well stimulation was previously 89,000 gallons and is now 98,000 gallons. While this water use represents a 10% increase, water use for hydraulic fracturing in California is still lower than water use in other oil and gas fields. Chemical formulations appear to have shifted since the previous study. This shift may be related to a change in the predominant service company. We identified 26 chemicals for which the frequency of use has changed by more than 30%. The total number of chemicals used has also expanded. Previously, 178 unique chemicals were identified as being added to well stimulation fluids. The total number of unique chemicals is now 205. Analytical data available for base and recovered fluids has expanded. The number of base fluid samples has increased from 12 to 35 and the number of recovered fluid samples has increased from 1,078 to 2,166. The expanded data set is more ideal for an evaluation of indicator chemicals and comparisons across different formations. The analytical data for recovered fluid samples indicates that many ions, radioactive constituents, and organics are consistently observed, making these chemicals ideal for consideration as potential indicators of aquifer contamination.

54 ENVIRONMENTAL SCIENCES↗

Trade-offs among restored ecosystem functions are context-dependent in Mediterranean-type regions

Global biodiversity hotspots, including Mediterranean-type ecosystems worldwide, are highly threatened by global change that alters biodiversity, ecosystem functions, and services. Some restoration activities enhance ecosystem functions by reintroducing plant species based on known relationships between plant traits and ecosystem processes. Achieving multiple functions across different site conditions, however, requires understanding how abiotic factors like climate and soil, along with plant assemblages, influence ecosystem functions, including their trade-offs and synergies. We used the ModEST ecosystem simulation model, which integrates carbon, water, and nutrient processes with plant traits, to assess the relationships between restored plant assemblages and ecosystem functions in Mediterranean-type climates and soils. We investigated whether maximised carbon increment, water use efficiency, and nitrogen use efficiency, along with their trade-offs and synergies, varied across different abiotic contexts. Further, we asked whether assemblages that maximised functions varied across environments and among these functions. We found that maximised ecosystem carbon increment and nitrogen use efficiency occurred under moist, warm conditions, while water use efficiency peaked under drier conditions. Generally, the assemblage that maximised one function differed from those for other maximised functions. Synergies were rare, except between water and nitrogen use efficiencies in loam soils across most climates. Trade-offs among maximised functions were common, varying in strength with abiotic context and plant assemblages, and were more pronounced in sandy loam soils compared to clay-rich soils. Our findings suggest that due to variation in abiotic conditions within and across Mediterranean-type regions at the global scale, site-specific plant assemblages are required to maximise ecosystem functions. Thus, lessons from a single site cannot be transferred to another site, even where the same plant functional types are available for restoration. Our simulation results offer valuable insights into potential ecosystem performance under specific abiotic conditions following restoration with particular plant functional types, thereby informing local restoration efforts.

54 ENVIRONMENTAL SCIENCES↗

Computational investigation of water glasses using machine-learning potentials

The molecular origins of water’s anomalous properties have long been a subject of scientific inquiry. The liquid–liquid phase transition hypothesis, which posits the existence of distinct low-density and high-density liquid states separated by a first-order phase transition terminating at a critical point, has gained increasing experimental and computational support and offers a thermodynamically consistent framework for many of water’s anomalies. However, experimental challenges in avoiding crystallization near the postulated liquid–liquid critical point have focused attention to water’s canonical glassy states: low-density and high-density amorphous ice. Here, we use two Deep Potential machine-learning models, trained on the Strongly Constrained and Appropriately Normed density functional and the highly accurate Many-Body Polarizable potential, to conduct an investigation of water’s glassy phenomenology based on quantum mechanical calculations. Despite not being explicitly trained on amorphous ices, both models accurately capture the structure and transformation of the water glasses, including their interconversion along different thermodynamic paths. Isobaric quenching of liquid water at various pressures generates a continuum of intermediate amorphous ices and density fluctuations increase near the liquid–liquid critical pressure. The glass transition temperatures of the amorphous ices produced at different pressures exhibit two distinct branches, corresponding to low-density and high-density amorphous ice behaviors, consistent with experiment and the liquid–liquid transition hypothesis. Extrapolating transformation pressures from isothermal compressions to experimental compression rates brings our simulations into excellent agreement with data. Our findings demonstrate that machine-learning potentials trained on equilibrium phases can effectively model nonequilibrium glassy behavior and pave the way for studying long-timescale, out-of-equilibrium processes with quantum mechanical accuracy.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Increased activity of core photorespiratory enzymes and CO 2 transfer conductances are associated with higher and more optimal photosynthetic rates under elevated temperatures in the extremophile Rhazya stricta

Increase photorespiration and optimising intrinsic water use efficiency are unique challenges to photosynthetic carbon fixation at elevated temperatures. To determine how plants can adapt to facilitate high rates of photorespiration at elevated temperatures while also maintaining water-use efficiency, we performed in-depth gas exchange and biochemical assays of the C 3 extremophile, Rhazya stricta. These results demonstrate that R. stricta supports higher rates of photorespiration under elevated temperatures and that these higher rates of photorespiration correlate with increased activity of key photorespiratory enzymes; phosphoglycolate phosphatase and catalase. The increased photorespiratory enzyme activities may increase the overall capacity of photorespiration by reducing enzymatic bottlenecks and allowing minimal inhibitor accumulation under high photorespiratory rates. Additionally, we found the CO 2 transfer conductances (stomatal and mesophyll) are re-allocated to increase the water-use efficiency in R. stricta but not necessarily the photosynthetic response to temperature. These results suggest important adaptive strategies in R. stricta that maintain photosynthetic rates under elevated temperatures with optimal water loss. The strategies found in R. stricta may inform breeding and engineering efforts in other C 3 species to improve photosynthetic efficiency at high temperatures.

59 BASIC BIOLOGICAL SCIENCES↗

Charge Reduction and Performance Analysis of a Heat Pump Water Heater Using R290 as a Refrigerant—A Field Study

Heat pump water heaters (HPWHs) are a proven technology for water heating that has been commercialized. The adoption of HPWHs for domestic and commercial water heating is growing rapidly because of their superior performance compared with alternative water heating methods. Whereas most existing systems use R-134a as a working refrigerant, R290 has gained major attention owing to its superior thermodynamic properties. The goal of the current study is to assess the performance of residential HPWH with R290 as a direct refrigerant replacement for R134a. Two units of a 50 gal HPWH were used in this experimental study. A baseline unit contained R134a refrigerant, and a prototype unit contained R290 refrigerant. The prototype unit was developed through the modification of a commercially available HPWH unit to achieve a low charge of R290 refrigerant. Another major modification was the replacement of the baseline compressor with a compressor designed for R290. Tests were conducted in a field environment (a research and demonstration house) using programmed drawn profiles daily. The prototype that reduced the charge by 43–47% provided displayed performance comparable to the baseline unit regarding first-hour rating (FHR) and the uniform energy factor (UEF).

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Idaho National Laboratory Water Assessment

Established in 1949, Idaho National Laboratory (INL) is part of the U.S. Department of Energy’s (DOE) complex of national laboratories. INL performs work in each of the strategic goal areas of the department: energy, national security, science, and environment, and is the nation’s center for nuclear energy research and development. Located in southeastern Idaho, its physical footprint includes 569,180 acres of federally owned land. A water balance for the fiscal year (FY) 2022 year was conducted for INL to identify major water using equipment and calculate the end-use categories. FY 2022 was selected as the evaluation year per the DOE Sustainability Performance Office. This report provides an analysis of facilities on the INL Site operated by Battelle Energy Alliance, LLC (BEA). This water balance report focused on the Advanced Test Reactor (ATR) Complex, Materials and Fuels Complex, Idaho Falls campus, and Central Facilities Area campuses, which consumed 98% of the 540,611 thousand gallons (kGal) of water used by INL in FY 2022. The resulting water balance identified the use categories for 75.3% of the FY 2022 water consumption.

99 GENERAL AND MISCELLANEOUS↗

S AP F LOWER : an automated tool for sap flow data preprocessing, gap-filling, and analysis using deep learning

Sap flow, a critical process in plant water use and ecosystem water cycles, is often measured using thermal dissipation probes (TDP) due to their ease of installation and continuous data collection. However, sap flow data frequently include noise, outliers, and gaps, creating challenges for analysis and requiring substantial manual processing. We developed S AP F LOWER , a tool that automates data preprocessing, model training, gap-filling, sapwood area scaling and modeling, and water use analysis. It integrates autocleaning, machine learning and deep learning models (e.g. random forest, Gaussian process regression, long short-term memory (LSTM), bidirectional LSTM (BiLSTM)), and efficient workflows to process sap flow data. S AP F LOWER can remove over 90% of noisy data while preserving legitimate variations and achieve high accuracy in gap-filling based on user-determined parameters. Random forest, LSTM, and BiLSTM models reduced root mean square error to 10% or less for long-term gaps. Model training and prediction can be performed efficiently within seconds. S AP F LOWER significantly enhances the efficiency and accessibility of TDP data analysis by automating complex tasks, enabling researchers without programming expertise to employ advanced techniques. Future improvements will focus on species-specific corrections for TDP and support for additional measurement methods. S AP F LOWER is openly available on GitHub (https://github.com/JiaxinWang123/SapFlower) and Zenodo (doi: 10.5281/zenodo.13665919).

ecosystem water balance↗