Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “water model”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9

Height Above Nearest Drainage (HAND) at Three-Meter Resolution for the State of Texas

URL: https://web.corral.tacc.utexas.edu/nfiedata/pin2flood/texas/ The current National Water Model and its Flood Inundation Mapping (FIM) service use 10-meter Height Above Nearest Drainage (HAND) hydrological terrain. In the Pin2Flood project (https://gis.tdem.texas.gov/portal/apps/storymaps/stories/72f0ec81a7654da688518f486122abed), funded by the Texas Division of Emergency Management (TDEM), ORNL computed the 3-meter HAND and associated synthetic rating curves for the State of Texas, covering 287,535 river streams (1.5km/stream) in 209 HUC8s. This archived dataset includes the HAND raster and the synthetic rating curve table for each of the 209 HUC8s in Texas. It is hosted at the Texas Advanced Computing Center (TACC). This 3-meter HAND is derived from the Fathom 3-meter DEM and NHDPlus V21 using an accelerated version of NOAA's Flood Inundation Mapping version 3 (FIM3, https://github.com/NOAA-OWP/inundation-mapping/tree/dev-fim3)

58 GEOSCIENCES↗

Hydrologic Evaluation of Smallmouth Bass Spawning Sites in the Upper Green River Using LiDAR

The smallmouth bass has been considered one of the most problematic invasive species in the upper Colorado River basin. As a predator of larval fish and juveniles, this nonnative species is an impediment to conservation efforts for endangered fish species of the Colorado River basin including Colorado pikeminnow (Ptychocheilus lucius), razorback sucker (Xyrauchen texanus), humpback chub (Gila cypha), and bonytail chub (Gila elegans). Several measures have been recommended to control smallmouth bass populations to conserve the endangered fish species. Among these measures are efforts to control flows during the spawning season to disrupt smallmouth bass reproduction. Previous work has suggested that smallmouth bass spawning in areas of the Green River could be inhibited during higher flows from the Flaming Gorge Dam due to lack of suitable habitat. Little research has been conducted to evaluate an optimal range of flow increases (“flow spikes”) needed to disrupt smallmouth bass reproduction in the Green River. Current research proposals to evaluate the effectiveness of flow spikes on controlling smallmouth bass reproduction target post-spawning flows of 4,500 cfs, maintained for three days, to inundate side-channel spawning habitats. In this report, we present results of a topographic study of smallmouth bass spawning sites in the upper Green River to characterize flow levels needed to inundate spawning habitats. This study used remotely sensed Light Detection and Ranging (LiDAR) data collected along the entire Green River, including channel margins and floodplain areas, to model water surface elevations and flow spikes needed to connect and inundate smallmouth bass spawning sites.

59 BASIC BIOLOGICAL SCIENCES↗

Dynamics of electrified liquid surface during plasma-liquid interaction

The research goal of this Department of Energy (DOE) Office of Fusion Energy Science (OFES) project was to investigate the electrified liquid surface dynamics using a shallow water model. The project was an extension of the Princeton Collaborative Research Facility (PCRF) project to work with Dr. Mikhail Shneider at Princeton University.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

RectifHydPlus: Forty Year Hydropower Generation Reanalysis for Conterminous United States, Version 1.1.

This dataset contains monthly hydropower net-generation totals for 590 plants (each >10 MW) across the conterminous United States (CONUS) from 1980 to 2019. RectifHydPlus v1.1 includes one harmonized table of historical monthly generation—backfilled with observed monthly values where available—and two companion tables: (i) an estimates-only version with no backfill and (ii) a hydrological-control version that removes the effects of capacity and operational change. Each table comprises 23,600 records (590 plants × 40 years). The dataset was developed to address temporal gaps and inconsistencies in publicly available hydropower generation data as available through EIA-923 survey reports. Each record includes a quality label denoting the underlying proxy—from best (direct reservoir releases) to weakest (pattern copied from similar years). By combining the agency-reported survey records with observed and simulated hydrologic releases, RectifHydPlus offers complete, quality-labeled monthly estimates suitable for trend analysis and generation of hydropower generation inputs for energy-water modeling.

Turner, Sean [Oak Ridge National Laboratory (ORNL)↗

Building Energy Modeling Enhancements to Identify Least-Cost Pathways to Net-Zero Carbon Homes: Preprint

Residential grid-interactive efficient buildings (GEBs) can utilize high levels of energy efficiency and demand flexibility to deliver value to occupants, the grid, and society. However, without the ability to analyze, design, and optimize residential GEBs there is a risk that homes will not realize their full potential value as efficient and dynamic resources, which could ultimately lead to higher than necessary energy costs for U.S. households and lower realization of potential energy efficiency and demand flexibility benefits such as increased convenience/automation, thermal comfort, durability, indoor air quality, and resilience. In 2018, the National Renewable Energy Laboratory (NREL) Residential Modeling Team developed a vision for an open source Residential GEB Analytics Platform built within DOE's EnergyPlus and OpenStudio modeling environment that would enable the design and optimization of residential GEBs, including the identification of least-cost pathways to highly energy-efficient and energy-flexible homes (e.g., net zero carbon homes). We created a detailed workplan for the development of new and enhanced residential GEB component-level models for EnergyPlus and OpenStudio needed to progress toward the vision for the analytics platform while delivering near-term benefits to industry. This paper 1) presents the vision for the platform, summarizing the workplan for residential GEB modeling enhancements; 2) highlights significant advancements that have been achieved between 2018 and 2022, including stochastic residential occupancy modeling, flexible water heater modeling, detailed lithium-ion stationary battery modeling, and realistic residential HVAC modeling; and 3) outlines ongoing efforts and next steps toward the full vision for the platform.

building energy modeling↗

Evaluating an Earth system model from a water manager perspective

Abstract. The large spatial scale of global Earth system models (ESMs) is often cited as an obstacle to using the output by water resource managers in localized decisions. Recent advances in computing have improved the fidelity of hydrological responses in ESMs through increased connectivity between model components. However, the models are seldom evaluated for their ability to reproduce metrics that are important for and resonate with practitioners or that allow practitioners to situate higher-resolution model outputs within a cascade of uncertainty stemming from different models and scenarios. We draw on the combined experience of the author team and water manager workshop participants to identify salient water management metrics and evaluate whether they are credibly reproduced over the conterminous USA by the Community Earth System Model v2 (CESM2) Large Ensemble. We find that, while the exact values may not match the observations, aspects such as interannual variability can be reproduced by CESM2 for the mean wet day precipitation and length of dry spells. CESM2 also captures the proportion of total annual precipitation that derives from the heaviest rain days in watersheds that are not snow-dominated. Aggregating the 7 d mean daily runoff to two-digit Hydrological Unit Code (HUC2) watersheds also shows that rain-dominated regions capture the timing and interannual variability of annual maximum and minimum flows. We conclude that there is potential for far greater use of large-ensemble ESMs, such as CESM2, in long-range water management decisions to supplement high-resolution regional projections.

Tye, Mari R. (ORCID:0000000324911020)↗

Groundwater and Surface Water Flow (GSFLOW) model files for the East River, Colorado

The data package contains model input files and executables for the East River, Colorado (750 km2) located in the headwaters of the Upper Colorado River Basin. The code applied is the U.S. Geological Survey (USGS) Groundwater and Surface Water Flow (GSFLOW) model. The model contains a 100-m grid resolution to represent topographic complexity and a daily timestep accounts for energy and water partitioning between the snowpack, vegetation, soil zone and bedrock. The land surface model is dynamically linked to a three-dimensional groundwater flow model that allows for streamflow gaining and losing conditions. The groundwater model accounts for nine stratigraphic units and extends 400 m below land surface. Using this modeling framework we explore historical water budgets (water year 1987-2022) and the influence of seasonal warming and associated mechanisms driving groundwater declines and streamflow loss. A Readme_062424.txt file provides instructions on how to download all files. Input and output files are provided for the historical simulation representative of water years 1987 to 2022 (i.e. baseline) and the all-year +4C warming scenario. Instructions are provided to run the seasonal warming scenarios with warming applied only to the autumn, winter, spring or summer months. Modeled output used in figures for Carroll et al., 2024 are also provided with metadata describing where these data were obtained. This dataset additionally includes a file-level metadata (flmd.csv) file that lists each file contained in the dataset with associated metadata; and a data dictionary (dd.csv) file that contains column/row headers used throughout the files along with a definition, units, and data type.Updated on 06-24-2024: The dataset was updated to include model outputs (updated base.zip and 4C.zip files), figure source files (Figure_Source_Files.zip), an updated Readme file (Readme_062424.txt), climate input files (climate_input_files.zip), and the adoption of ESS-DIVE File Level Metadata and CSV reporting formats (inclusion of flmd.csv and dd.csv files).

54 ENVIRONMENTAL SCIENCES↗

Overall chilled water system energy consumption modeling and optimization

The emergence of increasingly affordable variable-speed drive technology has changed the approach used to control chilled water systems equipped with these drives. The purpose of this research was to develop an integrated chilled water modeling technique that can determine the optimal system setpoints and estimate the energy saving potential of chiller system. The chiller system equipped with Variable Frequency Drives (VFDs) on cooling tower fans and condenser water pumps. To accomplish the objective, physical component models of the centrifugal chiller, cooling tower and condenser water pump were established with the goal of incorporating the system’s condenser water flow rate and cooling tower fan speeds as optimization variables. Furthermore, a cooling load prediction algorithm was developed using a multiple non-linear regression model to approximate the building’s cooling load subject to a range of environmental conditions. The inputs and outputs of the individual component models were linked to estimate how adjusting the cooling tower fan and condenser water pump speed would influence the system’s comprehensive performance. Here, the overall system model was then optimized using a generalized reduced gradient optimization algorithm to determine the potential energy savings through speed control with VFDs and to ascertain a control logic strategy for the building automation system to operate the heating and cooling system. A case-study was performed on a single chiller system at a museum and the model was calibrated according to logged data collected over four months. Results showed that for the system analyzed, the energy saving of optimizing the cooling tower fan system was found to be 12–15%, while the energy saving potential of optimizing the condenser water pump with the cooling tower fan was negligible. Additionally, comparing different cooling tower fan control strategies showed that a wet-bulb approach-based cooling tower control strategy was shown to have the highest correlation to the optimized fan speed with an R 2 of 0.924.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Modeling a Water-Cooled Printed Circuit Heat Exchanger Condensing CO2 for use in SCO2 Cycle System Optimization Studies

This work describes a one-dimensional model of a water-cooled printed circuit heat exchanger (PCHE) condensing supercritical CO2. The model is developed for use in cycle optimization studies (e.g., minimizing levelized cost of electricity) as either the main heat rejection cooler and/or a compressor intercooler for recompression closed Brayton supercritical CO2 power cycles. Sensitivity and case studies are used to illustrate the impact of important model parameters, and this includes allowing for independent variation of zig-zag channel wave angles on the CO2 and water side. Results show that for a given CO2 design pressure (and thus saturation temperature), the PCHE design inlet water temperature has a significant impact on the PCHE size. Results also demonstrate that if wave angles are the same on the CO2 and water side, the water side pressure drop will have more influence on determining the optimum PCHE mass than the CO2 side pressure drop. Reducing the water side wave angle to near straight channel flow offers a more compact design for a similar water side pressure drop (and pump power requirement). Cases are also shown for further increasing the compactness and how the PCHE mass is affected along with water pump power.

Liese, Eric↗

A coupled equilibrium boundary layer model with stable water isotopes and its application to local water recycling

The contribution of evapotranspiration (ET) to regional precipitation, known as “local water recycling”, is a key process in the water cycle that can affect water management. However, the amount of planetary boundary layer (PBL) moisture that arises from ET is highly uncertain due to complex atmosphere and land surface conditions. In this study, an idealized two-layer equilibrium boundary layer model was coupled with a stable water isotope module including HDO and H 2 18 O to constrain PBL growing season water transport processes. The model was validated using turbulent heat fluxes and isotope ratios of water vapor (δ m ) and precipitation (δ P ) measured at a cropland site and a nearby tall tower in the Upper Midwest, United States. The results show that the PBL equilibrium features of δ m and δ P are well-constrained by thermal and moisture equilibrium in the PBL. For this study region, the summer values of rain evaporation fraction (f) and local water recycling ratio (LRR) are estimated to be 0.09 and 0.29 ± 0.12, respectively. The summer LRR values for the years 2006–2010 were 0.35, 0.36, 0.17, 0.29, and 0.29, respectively. The small value of LRR in 2008 corresponded to a drought condition with the lowest precipitation and second lowest ET among the five years. The summer magnitude of the amount effect is –2.8‰ (mm day –1 ) –1 and –0.8‰ (mm day –1 ) –1 for HDO and H 2 18 O, respectively. The local water recycling is identified as a significant factor influencing the continental isotope effect. Cropland has likely changed the regional LRR by –7.6 to 19.5% under different pre-agriculture land use scenarios. In conclusion, the feedback processes revealed here indicate that local water recycling is expected to be weakened under drought conditions, but it will be enhanced if irrigation is applied more intensely with more frequent drought events as the climate continues to warm.

54 ENVIRONMENTAL SCIENCES↗

Model files for estimating snow dynamics and stable water isotopes across the East River, CO.

A coupled hydrologic and snowpack stable water isotope model is used to assesses controls on isotopic inputs across the East River, Colorado, a large, mountainous basin. The hydrologic model uses the semi-empirical, spatially distributed and publicly available U.S. Geological Survey numerical code Precipitation-Modelling Runoff System (PRMS). Water and energy are tracked daily through the atmosphere, canopy and subsurface at a 100-m grid resolution. The isotope mass balance model follows previous work by Ala-aho et al. (2017) to track stable isotopes entering the soil system as snowmelt or rain. Water stores and fluxes needed for the isotope model use hydrologic model output for each timestep and model modeled grid location. This data package provides all files related to the hydrologic model (executable, input and output files), the isotopic model calibration and the historic isotopic model (water years 2015-2020). The isotope model source code and executable are provided. The file "readme.txt" includes information on the file structure, steps to run the model, and description of included folders.

54 ENVIRONMENTAL SCIENCES↗

Sequential Precipitation Input Tagging (SPIT) to Estimate Water Transit Times and Hydrologic Tracer Dynamics Within Water‐Tagging Enabled Hydrologic Models

Determining the age distribution of water exiting a catchment is important for understanding groundwater storage and mixing. New water-tagging capabilities within models track precipitation events as they move through simulated storages, yet forward modeling of individual events may not systematically capture the full transit time distribution (TTD). Here, we present a “sequential precipitation input tagging” (SPIT) framework to tag all input precipitation at regular intervals during extended model simulations. Monthly tags over 7 years were applied at six National Ecological Observatory Network sites to calculate TTDs and derive mean virtual tracer age, $\overline{T_{V}}$, fractions of young water, F yw , and hydrologic tracer concentrations (water isotopes δ 18 O and δ 2 H) within a tagging enabled version of the Weather Research and Forecast hydrologic model (WRF-Hydro). Throughout seven simulation years, the fraction of simulated discharge derived from tagged events, F tag , increased each year, with the final year's F tag ranging from 66% to 100% and highlights the need to apply SPIT over many years to understand TTDs. When the F tag was >75%, simulated $\overline{T_{V}}$ ranged 179–923 days and F yw 0.6%–23.9%, with daily values exhibiting a power-law relationship with precipitation, discharge, and groundwater. Through implementation of SPIT, we find this hydrologic model configuration performs poorly in estimation of $\overline{T_{V}}$ and F yw (root mean squared error of 469 days and 14.4% respectively), suggesting it misrepresents subsurface mixing. Thus, the SPIT framework provides a reproducible approach to calculate watershed transit times within tagging enabled models and thereby assess and improve representation of hydrologic processes.

fraction of young water↗

Optimize heat prosumers' economic performance under current heating price models by using water tank thermal energy storage

Due to heat prosumers' dual roles of heat producer and heat consumer, the future district heating (DH) systems will become more flexible and competitive. However, the current heating price models have not yet supported the reverse heat supply from prosumers to the central DH system, which means the prosumers would gain no economic benefit from supplying heat to the central DH system. These unidirectional heating price models will reduce interest in prosumers, and thus hinder the promotion of prosumers in DH systems. This study aimed to optimize prosumers' economic performance under the current heating price models by introducing water tank thermal energy storage (WTTES). A dynamic optimization problem was formulated to explore prosumers' economic potentials. The size parameter of WTTESs was swept in prosumers to obtain the optimal storage size considering the trade-off between the payback period and the heating cost saving. The proposed method was tested on a campus DH system in Norway. The results showed that the prosumer's annual heating cost was saved up to 9%, and the investment of WTTES could be recovered in less than ten years. This study could provide guidelines on improving prosumers' economic performance and promote the development of prosumers during the transformation period of DH systems.

Li, H↗

Sampling and resolution characteristics in reduced order models of shallow water equations: Intrusive vs nonintrusive

We investigate the sensitivity of reduced order models (ROMs) to training data spatial resolution as well as sampling rate. In particular, we consider proper orthogonal decomposition (POD), coupled with Galerkin projection (POD-GP), as an intrusive reduced order modeling technique. For non-intrusive ROMs, we consider two frameworks. The first is using dynamic mode decomposition (DMD), and the second is based on artificial neural networks (ANNs). For ANN, we utilized a residual deep neural network, and for DMD we have studied two versions of DMD approaches; one with hard thresholding and the other with sorted bases selection. Also, we highlight the differences between mean-subtracting the data (centering) and using the data without mean-subtraction. We tested these ROMs using a system of 2D shallow water equations for four different numerical experiments, adopting combinations of sampling rates and spatial resolutions. For these cases, we found that the DMD basis obtained with hard threshodling is sensitive to sampling rate. The sorted DMD algorithm helps to mitigate this problem and yields more stabilized and converging solution. Furthermore, we demonstrate that both DMD approaches without mean subtraction provide significantly more accurate results than DMD with mean-subtracting the data. On the other hand, POD is relatively insensitive to sampling rate and yields better representation of the flow field. Meanwhile, spatial resolution has little effect on both POD and DMD performances. Here, the numerical results reveal that an ANN on POD subspace (POD-ANN) performs remarkably better than POD-GP and DMD in capturing system dynamics, even with a small number of modes.

42 ENGINEERING↗

Biophysical model of eelgrass and water quality in Coos Bay, OR shows greater mitigation potential for ocean acidification than hypoxia

Seagrass beds provide important ecosystem services and are valued, in part, for their potential to mediate stressors such as ocean acidification and hypoxia (OAH) for sensitive species. However, the susceptibility of seagrasses to anthropogenic impacts and recent declines motivate the need to better understand the drivers of seagrass and the water quality consequences that occur with variation in seagrass abundance. To meet this need, we leveraged existing monitoring data (water quality and seagrass), hydrodynamic circulation model, and biogeochemical model framework with seagrass submodel, to produce a biophysical model of Coos Bay estuary, Oregon, U.S. The model includes biogeochemical processes involving water quality, plankton, seagrass, and sediment-water interactions. Ecosystem models like this are useful for evaluating complex estuarine systems because they allow us to extend our understanding of system dynamics beyond existing observations and perform experiments to identify the processes driving observed patterns. We used the biophysical model of Coos Bay to evaluate the dynamics of water quality and native eelgrass (Zostera marina) under three eelgrass abundance scenarios (zero eelgrass, current extent, and maximum observed extent) to elucidate the relationship between eelgrass and OAH. Including eelgrass in the Coos Bay model produced results that more closely resembled water quality observations - dissolved oxygen (DO) and pH were more dynamic in simulations with eelgrass, often having both higher highs and lower lows. While there were some areas of the estuary where DO improved with the addition of eelgrass to the model there was overall a small net increase in harmful DO conditions (based on a salmon physiological threshold). In contrast, ocean acidification conditions, pH and calcium carbonate saturation state for aragonite (Ω), were improved (based on oyster requirements) with the addition of eelgrass - although the magnitude of improvement differed seasonally and spatially. Our new model represents a useful tool - one which accounts for and controls the relevant physical and biogeochemical processes - to evaluate conditions that confer resilience or enhance vulnerability to OAH in an important Pacific Northwest coastal estuary and results can inform the OAH-related dynamics occurring in other eastern boundary current estuaries.

FVCOM-ICM↗

Delineation of endorheic drainage basins in the MERIT-Plus dataset for 5 and 15 minute upscaled river networks

Abstract The MERIT-Hydro networks re-gridded by the Iterative Hydrography Upscaling (IHU) algorithm do not retain exo- or endorheic basin attributes from the original data. Here we developed methods to assign such attributes to those and any other digital river networks. The motivation is that endorheic inland drainage basins are essential for hydrologic modelling of global and regional water balances, land surface water storage, gravity anomalies, sea level rise, etc. First, we create basin attributes that explicitly label endorheic and exorheic catchments by the criteria of direct or hidden connectivity to the ocean without changing their flow direction grid. In the second step we alter the delineation of endorheic basins by the merging algorithm that eliminates small inland watersheds to the adjacent host basins. The resulting datasets have a significantly reduced number of endorheic basins while preserving the total land portion and topology of the inland basins. The data was validated using the Water Balance Model by comparing volume of endorheic inland depressions with modelled water accumulation in their inland lakes.

58 GEOSCIENCES↗