SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
UO 2 F 2 biosensors, and related U-sensing and/or F-sensing genetic molecular components, genetic circuits, compositions, methods and systems are described, which in several embodiments can be used to detect and/or neutralize uranium and in particular bioavailable UO 2 F 2 .
Uranium contamination of soils and groundwater in the United States represents a significant health risk and will require multiple remediation approaches. Microbial phosphatase activity coupled to the addition of an organic P source has recently been studied as a remediation strategy that provides an extended release of inorganic P (Pi) into U-contaminated sites, resulting in the precipitation of meta-autunite minerals. Previous laboratory- and field-based biomineralization studies have investigated environments with relatively high U concentrations (>20 μM). However, most contaminated sites have much lower U concentrations (<2 μM). The Environmental Protection Agency (EPA) limit for U in drinking water is 0.126 μM. Reaching this regulatory limit becomes challenging as U concentrations approach autunite solubility. Furthermore, we studied the precipitation of U(VI)-phosphate minerals by an environmental isolate of Caulobacter sp. (strain OR37) from an Oak Ridge, Tennessee, U-contaminated site. Abiotic U(VI) solubility experiments reveal that U(VI)-phosphate minerals do not form in the presence of excess Pi (500 μM) when U(VI) concentrations are <1 μM and pH is <5. When OR37 cells are reacted under the same conditions with Pi or glycerol-2-phosphate, U(VI)-phosphate mineral formation was observed, along with the formation of intracellular polyphosphate granules. These results show that bacteria provide supersaturated microenvironments needed for U(VI)-phosphate mineralization while hydrolyzing organic P sources. This provides a pathway to lower U concentrations to below EPA limits for drinking water.
Uranium silicides are considered for advanced technology reactor fuels due to their enhanced thermal conductivity and high uranium density (U 3 Si and U 3 Si 2 ) compared to traditional UO 2 . Susceptibility to oxidation and wash out, in the event of a cladding breech, could limit the potential for deployment of silicides as accident tolerant fuels. Mitigating the water reaction for U 3 Si 2 could enable its use as an accident tolerant, high uranium density fuel or as a composite fuel constituent. Reported here is the impact of alloying additions of Al, Cr and Y on the high temperature, steam oxidation response of U 3 Si 2 . In addition to the thermogravimetric response, as melted microstructures, phase compositions and post oxidation analysis are also presented. Here, the investigation shows steam oxidation dynamics are altered, from non-alloyed U 3 Si 2 , under thermally ramped conditions. However, additional alloy development of these fuel forms is necessary for further consideration as candidate accident tolerant fuels in water-cooled reactor designs.
Uranium silicide (U 3 Si 2 ) is a candidate material for the high-density nuclear fuel in commercial light water reactors [1], [2]. Its higher uranium density, 11.3 g-U/cm3, compared to that of uranium dioxide (UO 2 ), 9.7 g-U/cm3, can improve the performance of a nuclear reactor while using low enriched uranium (LEU) and diversify the choice of cladding materials [1]–[3]. It also has a higher thermal conductivity than UO 2 , which can reduce the thermal stress on the material caused by a temperature gradient across the fuel pellet and provide a larger margin for some postulated accidents [1], [2], [4]. Furthermore, compared to U3Si, another high-density fuel candidate, it has better resistance to in-pile swelling due to less irradiation-induced rapid amorphization [1], [3]. Corresponding to its importance in nuclear engineering, many previous studies have reported the properties of U3Si2. Experiments showed that U 3 Si 2 is a paramagnetic (PM) metal, where a slight linear increase in magnetic susceptibility was measured with increasing temperature [5], [6]. In addition, thermodynamic quantities such as thermal expansion coefficient, heat capacity, and thermal conductivity were experimentally determined over a wide temperature range [1], [7], [8]. In several computational studies, ab initio atomistic simulations based on density functional theory (DFT) were performed to calculate various properties including elastic constants, electronic density of states (DOS), and phonon dispersion curves [9]–[12]. Nevertheless, thermal neutron scattering cross sections, which are critical to the prediction of the parameters in reactor physics that are ultimately related to reactor criticality, have not yet been evaluated for U3Si2. The scattering cross section can be calculated from the phonon DOS, or the energy spectrum of lattice vibrations, of the crystalline system [13], [14]. However, there is also no experimental data available for the phonon DOS of U 3 Si 2 . While some computational studies reported the phonon DOS and/or dispersion curves from ab initio simulations [9]–[12], the accuracy cannot be guaranteed because it is unclear whether the spin-polarization behavior of PM U 3 Si 2 was properly described. In the present study, the thermal neutron scattering cross section for U 3 Si 2 is evaluated for the first time by calculating the phonon DOS for U3Si2 from ab initio lattice dynamics (AILD) simulations based on DFT. First, U 3 Si 2 is modeled based on the experimental structure, and AILD simulations are performed on the modeled U3Si2 to optimize the structure. Next, AILD simulations are performed for supercells with atomic displacement to calculate Hellmann-Feynman forces. Based on the calculated forces, partial phonon DOSs for U and Si are obtained, and the thermal neutron scattering law (TSL) for U 3 Si 2 is finally evaluated. To verify the accuracy of the calculations in the present study, the calculation results are compared with experimental data on the structure and heat capacity of U3Si2 [1], [7], [8], [15].
Radiochronometry provides the model age of nuclear materials, which is useful for understanding the production history of materials found outside of regulatory control. Certified reference materials (CRMs) are important for radiochronometry to increase confidence in measurement quality; however, the absence of 231 Pa/ 235 U CRMs necessitates that nuclear forensic laboratories measure the 231 Pa/ 235 U model ages of preexisting uranium reference materials. Here, in this work, new consensus 231 Pa/ 235 U model ages are reported from three nuclear forensic laboratories for three reference materials using current analytical methods. These updated consensus values can be used for quality control of 231 Pa/ 235 U model age measurements.
Abstract Triuranium disilicide (U 3 Si 2 ) fuel with silicon carbide (SiC) composite cladding is being considered as an advanced concept/accident tolerant fuel for light water reactors thus, understanding their chemical compatibility under operational and accident conditions is paramount. Here we provide a comprehensive view of the interaction between U 3 Si 2 and SiC by utilizing density functional theory calculations supported by diffusion couple experiments. From the calculated reaction energies, we demonstrate that triuranium pentasilicide (U 3 Si 5 ), uranium carbide (UC), U 20 Si 16 C 3 , and uranium silicide (USi) phases can form at the interface. A detailed study of U 3 Si 2 and SiC defect formation energies of the equilibrated materials yielding the interfacial phases U 20 Si 16 C 3 , U 3 Si 5 and UC reveal a thermodynamic driving force for generating defects in both fuel and cladding. The absence of either the U 3 Si 2 or SiC phase, however, causes the defect formation energies in the other phase to be positive, removing the driving force for additional interfacial reactions. The diffusion couple experiments confirm the conclusion with demonstrated restricted formation of U 3 Si 5 , UC, and U 20 Si 16 C 3 /USi phases at the interface. The resulting lack of continuous interaction between the U 3 Si 2 and SiC, reflects the diminishing driving force for defect formation, demonstrating the substantial stability of this fuel-cladding system.
In natural uranium, the 234 U isotope represents only 0.0055%, however, this minor isotope can affect highly enriched uranium metal benchmark calculations. In fact, enriched uranium contains more 234 U than natural uranium as the result of the uranium enrichment process. Therefore, the n+ 234 U nuclear data evaluation is one of the milestones of the APPENDIX B within the Nuclear Criticality Safety Program (NCSP).
Oxidant K (1s) X-ray Emission Spectroscopy (XES) was used to investigate covalency in the Oxidant 2p – Uranium 5f bonds of Uranium Dioxide (UO 2 ) and Uranium Tetrafluoride (UF 4 ). It will be shown that the width of the 2p Occupied Density of States (ODOS), determined from the XES measurements, correlates with the increased 5f covalency of UO 2 and the increased ionicity of UF 4 . Analysis of the XES results includes comparison to spectral simulations, cluster calculations and peak fitting, demonstrating the potential of the oxidant XES measurements as a probe of 5f covalency.
Due to its high thermal conductivity and uranium density, U 3 S i2 has been considered as a candidate for use as an accident tolerant fuel (ATF). In order to fully assess its suitability and performance as a fuel, the impact of fission products (FPs) on the stability and performance of U 3 Si 2 must be investigated. The interactions of FPs and U 3 Si 2 have had relatively little study until now and require experimental and computational examination. U 3 Si 2 was doped with individual FPs to explore U-Si-FP interactions and phase equilibria that may impact the performance of the ATF during irradiation. Elemental Ce, Mo, Y, or Zr were used to individually dope U 3 Si 2 at a concentration of 5 wt% FP. A diffusion couple of a 1:1 Mo:Zr alloy and U 3 Si 2 was heated to 1200 °C in order to consider the impacts of multiple FPs on the stability and structure of the fuel. Samples were characterized for FP solubility and secondary phase formation using electron microscopy, energy dispersive spectroscopy, and x-ray diffraction. First principles density functional theory calculations complemented the experimental effort to understand FP behavior. Experimental and computational findings were used in the development of a thermodynamic database containing 8 major FPs and their associated silicide phases. Finally, fuel compositions generated from depletion calculations were used to thermodynamically model the equilibrium phases of the fuel undergoing burnup.
Uranium alloyed with 10 wt% Mo (U-10Mo) undergoes discontinuous precipitation (DP) when subjected to sub-eutectoid heat-treatment. It is hypothesized that the crystallographic texture of the U-10Mo can be modified to minimize the degree of DP, however the evolution of texture throughout the manufacturing process is not well understood. Crystallographic textures of two U-10Mo samples homogenized at 900°C and 1000°C were studied after uniaxial rolling and annealing. A total of 6 samples were analyzed upon rolling using a combination of hot and cold rolling conditions to strains of 83%, 90% and 97% and subsequently annealed at 700°C for one hour. Microstructures and textures were analyzed via electron backscatter diffraction (EBSD) for each homogenization, strain and post-annealed states. Results show that the U-10Mo exhibits typical rolling textures seen in body-centered cubic materials with increasing intensities of both a- and ?-fibers with increasing strain. After recrystallization, the texture appeared to be effectively randomized in all samples. Homogenization temperature showed no effect on the rolling and recrystallization behavior. Potential factors leading to the randomization of texture are discussed along with the implications of textures on the minimization of DP.
Application of the 231 Pa/ 235 U radiochronometer for nuclear forensic investigations is challenged by a lack of certified reference materials with 231 Pa/ 235 U model purification dates. The Japan Atomic Energy Agency, Los Alamos National Laboratory, and Lawrence Livermore National Laboratory completed an interlaboratory study measuring 231 Pa/ 235 U model ages of New Brunswick Laboratory CRM U100. Results from independent laboratories were combined to calculate a consensus 231 Pa/ 235 U model purification date for CRM U100 of March 26, 1959 ± 237 days. This 231 Pa/ 235 U consensus date for CRM U100 may be used by the nuclear forensic community for quality control of 231 Pa/ 235 U radiochronometry measurements of unknown materials.
Low enriched uranium (< 20 % 235 U)-molybdenum (U-Mo) monolithic fuel is the primary candidate for high performance research and test reactors, and is in the process of being qualified to replace highly enriched uranium (≥ 20 % 23 5U) fuel. As part of the qualification process, it is critical to understand and predict the behavior of fission gas bubbles under irradiation, which affects fuel swelling and fuel failure. Mechanistic fuel models are being developed that can both reproduce the existing experimental data for fuel swelling, and be further applied to irradiation conditions beyond the experimental scope. Diffusion of species under irradiation conditions is an important parameter in the mechanistic fuel models; however, no temperature-relevant experimental diffusion data exists. In the present work, radiation-enhanced diffusion coefficients of U, Mo, and Xe in λU-10wt.%Mo were calculated in the temperature range between 300 K and 1400 K via rate-theory models and molecular dynamics simulations with an embedded-atom method interatomic potential for the U-Mo-Xe system. Accordingly, total diffusion coefficients under relevant irradiation conditions are determined using previously obtained intrinsic thermal diffusion and radiation-driven diffusion coefficients, as well as the newly calculated radiation-enhanced diffusion coefficients presented herein. Radiation-enhanced diffusion of U and Mo was dominant in the intermediate temperature range, whereas radiation-enhanced diffusion of Xe did not significantly contribute to total diffusion of Xe at the relevant fission rate densities. Radiation-enhanced diffusion of Xe became faster than both intrinsic thermal diffusion and radiation-driven diffusion at a fission rate density of 5 x 10 22 fissions/m 3 /s, which is higher than the typical fission rate density range in research reactors. The temperature regime that radiation-enhanced diffusion of each element dominated was dependent on the fission rate density. Finally, the total diffusion coefficients of U, Mo, and Xe, updated in this work, will be utilized as parameters in the mechanistic fuel models to help predict the behavior of fission gas bubbles under irradiation more accurately.
Dense uranium mononitride (UN) pellets with controlled microstructures and tailored grain size from large-grained to a few microns are synthesized by spark plasma sintering (SPS) combined with high energy ball milling. The impacts of the sintering conditions on fuel microstructure, grain size, physical density, and phase behavior are systematically investigated, and the thermal-mechanical properties and oxidation behavior of the SPS densified UN pellets are characterized. Higher sintering temperatures and longer ball milling durations and thus finer starting UN powders promote sintering and densification, and dense UN pellets above 95% theoretical density can be achieved by SPS at 1873 K for 10 min. UN phase purity is maintained in the SPS-densified pellets sintered at a lower temperature and short duration. A phase heterogeneity with secondary UO 2 or uranium sesquinitride (U 2 N 3 ) occurs for the UN pellets sintered at higher temperatures using finer UN powders. The hardness and fracture toughness of the SPS-densified UN pellets increase with smaller grain sizes and higher densities to 7.9 GPa and 3.5 MPa m 1/2 , respectively. Furthermore, both small (1–2 μm) and large grain-sized (30–50 µm) UN pellets exhibit good thermal conductivity. Dynamic oxidation testing by a thermogravimetric analyzer in air shows that the onset temperature for oxidation varies with microstructure and phase heterogeneity of the SPS densified UN pellets. Particularly, the smaller-grained (micron-sized) UN pellets containing uranium oxides and U 2 N 3 display lower weight gain and significantly-reduced oxidation kinetics, and full oxidation completes at a temperature above 1173 K when tested with a ramp rate of 10 K/min.
High-throughput computational studies of lanthanide and actinide chemistry with density-functional theory are complicated by the need for Hubbard U corrections, which ensure localization of the f-electrons, but can lead to metastable states. This work presents a systematic investigation of the effects of both Hubbard U value and metastable states on the predicted structural and thermodynamic properties of four uranium compounds central to the field of nuclear fuels: UC, UN, UO 2 , and UCl 3 . We also assess the impact of the exchange-hole dipole moment (XDM) dispersion correction on the computed properties. Overall, the choice of Hubbard U value and inclusion of a dispersion correction cause larger variations in the computed geometric properties than result from metastable states. Further, the weak dependence of structure optimization on metastable states should simplify future high-throughput calculations on actinides. Conversely, addition of the dispersion correction is found to offset the repulsion introduced by the Hubbard U term and provides greatly improved agreement with experiment for both cell volumes and heats of formation. The XDM dispersion correction is largely invariant to the chosen U value, making it a robust dispersion correction for actinide systems.
A “screening analysis” is implemented at Pahute Mesa (PM), Nevada National Security Site (NNSS), to determine subsets of the 43 radionuclides listed in the radionuclide inventory of Finnegan et al. (2016) that are of relevance or potential relevance to the hydrologic source term (HST) for assessment of radionuclide transport in groundwater. Consideration is added to how levels of contamination are defined and whether any other radionuclides not in the inventory are relevant to the HST. A model is developed to estimate a range of possible source concentrations in groundwater that account for uncertainty in partitioning into melt glass and sorption into surrounding rock of the exchange zone for the 82 PM underground nuclear tests detonated in vertical shafts. The model also accounts for the varied hydrogeochemical settings. Transport parameters needed for the screening model calculations are developed from databases for hydrogeologic units, chemistry, mineralogy, fracture spacing, fracture aperture, fracture openness, matrix porosity, bulk density, saturation, and alteration. Of key importance is consideration of diagenetic zonation of the mineralogy related to hydrothermal alteration. The screening analysis compares model results with available groundwater radiochemistry data. Consistency between screening model results and available data helps validate the model for application to all 43 radionuclides, most of which have no measurements or only non-detect measurements of concentration in groundwater. The screening analysis determines that ten radionuclides – tritium, Sr-90, I-129, Cs-137, U-232, U-233, U-234, U-238, and the total of Pu-239 and Pu-240 are relevant to the HST. Determination of relevance is primarily based on data and/or model results indicating source concentration exceeding a maximum contaminant level (MCL) out to 100 years since the time of detonation. U-238 is relevant to assessment of contamination relative to MCLs for uranium and gross alpha particle activity. Five other radionuclides – C-14, Cl-36, Tc-99, Np-237, and Pu-238 – are determined potentially relevant to the HST based on a 0.1 MCL threshold. The screening analysis recommends additional attention to the natural daughter radionuclides of the uranium series (U-238) and thorium series (Th-232) decay chains, particularly Ra-226 and Ra-228, that were not included the inventory.
Plate-type fuel elements consisting of a high-density, low-enriched uranium (LEU) U–10Mo-based fuel foil encapsulated in an aluminum alloy (AA) cladding are fabricated using the hot isostatic pressing (HIP) technique. During the HIP process, the fuel plate system is heated to 560 °C, then cooled to room temperature. This heat cycle significantly affects the mechanical properties of the aluminum cladding, and experimental investigations have shown that, post-HIP bonding, the mechanical properties of the aluminum cladding transition from those of AA 6061-T6 to something closer to the O temper. More specifically, the ultimate strength of the cladding decreases while its ductility increases, making it challenging to capture the changes in mechanical behavior and material properties. Understanding the residual stresses generated during the HIP process is critical for assessing the fuel plate’s integrity under various temperature, pressure, and irradiation. To simulate the HIP bonding process, the elastic, plastic, and thermal properties of the cladding are assumed to be similar to those of AA 6061-O temper. However, the primary challenge lies in the lack of available data for the creep model of the AA 6061 cladding during this transient process of HIP. The present study focuses on developing a computational model that predicts the creep behavior of the aluminum cladding in the fuel plates during the HIP process, as cladding creep significantly influences the residual stresses generated in U-10Mo fuel plates during HIP fabrication. Furthermore, as HIP bonding occurs at high temperatures that are nearing the melting point of aluminum, the present work considered a temperature-dependent Arrhenius-type creep model. In particular, a hyperbolic sine creep model is employed to estimate the creep properties of the as-fabricated aluminum cladding. In conclusion, the residual stresses predicted in the U-10Mo fuel when using the newly calibrated creep model closely align with the experimental measurements, validating the model’s accuracy.
Uranium-233 plays an important role in the Th-U fuel cycle, with substantial production in the cycle. This cycle has been proposed as an alternative to the U-Pu fuel cycle due to its reduced production of transuranic elements. An accurate measurement of the 233 U($\eta$,$\gamma$) cross section is required by the National Criticality Safety Program (NCSP) to complete the neutron-induced cross section data, where experimental capture cross section data are scarce and were measured decades ago. The most recent capture cross section data available in the literature were measured in 2007 at the n_TOF facility (CERN); in the 60s measurements were performed at Rensselaer Polytechnic Institute (RPI) and at LANL. Finally, as reported by ORNL, a new evaluation with a revised (renormalized) fission cross section is needed on 233 U. The challenge for this measurement lies in the difficulty of measuring the capture cross section data in the competing fission background, as the fission cross section is around one order of magnitude larger than the capture cross section for 233 U. The accuracy of a capture cross section measurement depends on discrimination between $\gamma$’s produced in capture and fission reactions, for which an experimental setup combining capture and fission detectors is needed. For the ($\eta$,$\gamma$) cross section measurement at LANSCE, this discrimination is achieved by combining the Detector for Advanced Neutron Capture Experiments (DANCE), to measure $\gamma$’s from capture reactions, with a Parallel Plate Avalanche Counter (PPAC) to tag the $\gamma$’s produced by fission. This method was successfully used to measure 235 U and 239 Pu capture cross sections. In these measurements, the neutron capture cross section was determined in a large fission background well above 100 keV. As part of the NCSP nuclear data effort, we have looked at past DANCE measurements on 233 U($\eta$,$\gamma$) and evaluated whether existing data is adequate to apply this technique.
Reactor physics depletion benchmarks for low-enriched uranium fuel are limited in number. In particular, there is very limited data for LEU benchmarks for U-10Mo (Uranium-10% Molybdenum) plate fuel developed for use in U.S. high-performance research reactors (USHPRR). USHPRR includes the Advanced Test Reactor (ATR), Advanced Test Reactor Critical Facility (ATR-C), High Flux Isotope Reactor (HFIR), University of Missouri Research Reactor (MURR), Massachusetts Institute of Technology Reactor (MITR), and National Bureau of Standards Reactor (NBSR) at the National Institute of Science and Technology. These reactors are fueled with high-enriched uranium dispersed fuel in a silicon/aluminum matrix. In support of conversion to a HALEU fuel, qualification of U-10Mo formed into a monolithic foil is being performed. Fuel qualification involves irradiated fueled specimens in the ATR. The irradiation tests provide an opportunity to benchmark depletion capabilities of reactor physics codes in support of the ATR operation, as well as develop benchmarks that can be used by other institutions to benchmark other reactor physics codes. This report documents the development of a benchmark model of the irradiation of the ATR Full -size plate In center flux trap Position 7 (AFIP-7) experiment.