Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “tunable light”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Finely tunable dynamical coloration using bicontinuous micrometer-domains

Nanostructures similar to those found in the vividly blue wings of Morpho butterflies and colorful photonic crystals enable structural color through constructive interference of light waves. Different from commonly studied structure-colored materials using periodic structures to manipulate optical properties, we report a previously unrecognized approach to precisely control the structural color and light transmission via a novel photonic colloidal gel without long-range order. Nanoparticles in this gel form micrometer-sized bicontinuous domains driven by the microphase separation of binary solvents. This approach enables dynamic coloration with a precise wavelength selectivity over a broad range of wavelengths extended well beyond the visible light that is not achievable with traditional methods. The dynamic wavelength selectivity is thermally tunable, reversible, and the material fabrication is easily scalable.

42 ENGINEERING↗
DOE OSTI2023

Expanding the color palette of bicolor-emitting nanocrystals

Owing to their bright and tunable luminescence spectra, nanocrystals appear as a unique playground for light source design. Displays and lighting require white light sources that combine several narrow lines. As Kasha's rule prevents the emission of hot carriers, blends of multiple nanocrystal populations are currently the obvious strategy for broad-band source design. However, a few reports suggest that bicolor emission can also be obtained from a single particle even under weak excitation if a careful design of the exciton scattering mechanism sufficiently slows down its relaxation pathways. A key challenge remains to maintain quantum confinement for color tunability in the same structure, while simultaneously achieving a large size to leverage the critical, slower exciton diffusion or relaxation down to the ground state. In this work, we demonstrate that 2D nanoplatelets offer an original opportunity for the design of confined and large heterostructures. We demonstrate that bicolor emission is not limited to green–red pair and show that blue–yellow and purple–green emissions can be obtained from CdSe/CdTe/CdSe core/crown/crown and CdSe/CdS core/crown heterostructures, respectively.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2025

Hidden domain boundary dynamics toward crystalline perfection

A central paradigm of nonequilibrium physics concerns the dynamics of heterogeneity and disorder, impacting processes ranging from the behavior of glasses to the emergent functionality of active matter. Understanding these complex mesoscopic systems requires probing the microscopic trajectories associated with irreversible processes, the role of fluctuations and entropy growth, and the timescales on which nonequilibrium responses are ultimately maintained. Approaches that illuminate these processes in model systems may enable a more general understanding of other heterogeneous nonequilibrium phenomena, and potentially define ultimate speed and energy cost limits for information processing technologies. Here, we apply ultrafast single-shot X-ray photon correlation spectroscopy to resolve the nonequilibrium, heterogeneous, and irreversible mesoscale dynamics during a light-induced phase transition in a (PbTiO 3 ) 16 /(SrTiO 3 ) 16 superlattice. Such ferroelectric superlattice systems are a useful platform to study phase transitions and topological dynamics due to their high degree of tunability. This provides an approach for capturing the nucleation of the light-induced phase, the formation of transient mesoscale defects at the boundaries of the nuclei, and the eventual annihilation of these defects, even in systems with complex polarization topologies. We identify a nonequilibrium correlation response spanning >10 orders of magnitude in timescales, with multistep behavior similar to the plateaus observed in supercooled liquids and glasses. We further show how the observed time-dependent long-time correlations can be understood in terms of stochastic and non-Markovian dynamics of domain walls, encoded in waiting-time distributions with power-law tails. This work defines possibilities for probing the nonequilibrium and correlated dynamics of disordered and heterogeneous media.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Quantification of Key Peroxy and Hydroperoxide Intermediates in the Low-Temperature Oxidation of Dimethyl Ether

Dimethyl ether (DME) oxidation is a model chemical system with a small number of prototypical reaction intermediates that also has practical importance for low-carbon transportation. Although it has been studied experimentally and theoretically, ambiguity remains in the relative importance of competing DME oxidation pathways in the low-temperature autoignition regime. To focus on the primary reactions in DME autoignition, we measured the time-resolved concentration of five intermediates, CH 3 OCH 2 OO (ROO), OOCH 2 OCH 2 OOH (OOQOOH), HOOCH 2 OCHO (hydroperoxymethyl formate, HPMF), CH 2 O, and CH 3 OCHO (methyl formate, MF), from photolytically initiated experiments. We performed these studies at P = 10 bar and T = 450-575 K, using a high-pressure photolysis reactor coupled to a time-of-flight mass spectrometer with tunable vacuum-ultraviolet synchrotron ionization at the Advanced Light Source. Our measurements reveal that the timescale of ROO decay and product formation is much shorter than predicted by current DME combustion models. The models also strongly underpredict the observed yields of CH 2 O and MF and do not capture the temperature dependence of OOQOOH and HPMF yields. Adding the ROO + OH $\rightarrow$ RO + HO 2 reaction to the chemical mechanism (with a rate coefficient approximated from similar reactions) improves the prediction of MF. Increasing the rate coefficients of ROO ↔ QOOH and QOOH + O 2 ↔ OOQOOH reactions brings the model predictions closer to experimental observations for OOQOOH and HPMF, while increasing the rate coefficient for the QOOH $\rightarrow$ 2 CH 2 O + OH reaction is needed to improve the predictions of formaldehyde. In conclusion, to aid future quantification of DME oxidation intermediates by photoionization mass spectrometry, we report experimentally determined ionization cross-sections for ROO, OOQOOH, and HPMF.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Ligand Desorption and Fragmentation in Oleate-Capped CdSe Nanocrystals under High-Intensity Photoexcitation

Semiconductor nanocrystals (NCs) offer prospective use as active optical elements in photovoltaics, light-emitting diodes, lasers, and photocatalysts due to their tunable optical absorption and emission properties, high stability, and scalable solution processing, as well as compatibility with additive manufacturing routes. Over the course of experiments, during device fabrication, or while in use commercially, these materials are often subjected to intense or prolonged electronic excitation and high carrier densities. The influence of such conditions on ligand integrity and binding remains underexplored. Here, in this study, we expose CdSe NCs to laser excitation and monitor changes in oleate that is covalently attached to the NC surface using nuclear magnetic resonance as a function of time and laser intensity. Higher photon doses cause increased rates of ligand loss from the particles, with upward of 50% total ligand desorption measured for the longest, most intense excitation. Surprisingly, for a range of excitation intensities, fragmentation of the oleate is detected and occurs concomitantly with formation of aldehydes, terminal alkenes, H 2 , and water. After illumination, NC size, shape, and bandgap remain constant although low-energy absorption features (Urbach tails) develop in some samples, indicating formation of substantial trap states. The observed reaction chemistry, which here occurs with low photon to chemical conversion efficiency, suggests that ligand reactivity may require examination for improved NC dispersion stability but can also be manipulated to yield desired photocatalytically accessed chemical species.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Time-resolved quantification of key species and mechanistic insights in low-temperature tetrahydrofuran oxidation

Here, we investigate the kinetics and report the time-resolved concentrations of key chemical species in the oxidation of tetrahydrofuran (THF) at 7500 torr and 450–675 K. Experiments are carried out using high-pressure multiplexed photoionization mass spectrometry (MPIMS) combined with tunable vacuum ultraviolet radiation from the Berkely Lab Advanced Light Source. Intermediates and products are quantified using reference photoionization (PI) cross sections, when available, and constrained by a global carbon balance tracking approach at all experimental temperatures simultaneously for the species without reference cross sections. From carbon balancing, we determine time-resolved concentrations for the ROO˙ and ˙OOQOOH radical intermediates, butanedial, and the combined concentration of ketohydroperoxide (KHP) and unsaturated hydroperoxide (UHP) products stemming from the ˙QOOH + O 2 reaction. Furthermore, we quantify a product that we tentatively assign as fumaraldehyde, which arises from UHP decomposition via H 2 O or ˙OH + H loss. The experimentally derived species concentrations are compared with model predictions using the most recent literature THF oxidation mechanism of Fenard et al., (Combust. Flame, 2018, 191, 252–269). Our results indicate that the literature mechanism significantly overestimates THF consumption and the UHP + KHP concentration at our conditions. The model predictions are sensitive to the rate coefficient for the ROO˙ isomerization to ˙QOOH, which is the gateway for radical chain propagating and branching pathways. Comparisons with our recent results for cyclopentane (Demireva et al., Combust. Flame, 2023, 257, 112506) provide insights into the effect of the ether group on reactivity and highlight the need to determine accurate rate coefficients of ROO˙ isomerization and subsequent reactions.

Demireva, Maria↗
DOE OSTI2023

Near-MHz temperature and H 2 O measurements in post-detonation fireballs of 25 g hemispherical explosives using scanned-wavelength-modulation spectroscopy

A laser absorption spectroscopy diagnostic integrated within a hardened optical probe was used to measure temperature and water mole fraction at 500 kHz in post-detonation fireballs of explosives. In the experiments, an exploding-bridgewire detonator initiated a 25 g hemisphere of explosive (N5 or PETN). This produced a hemispherical fireball that traveled radially towards a hardened measurement probe. The probe contained a pressure transducer and optical equipment to pitch fiber-coupled laser light across a 12.6 cm gap onto a detector. Tunable diode lasers emitting near 7185.6 and 6806 c m − <#comment/> 1 were used to measure the absorbance spectrum of H 2 O utilizing peak-picking scanned-wavelength-modulation spectroscopy with a scan frequency of 500 kHz and modulation frequencies of 35 and 45.5 MHz, respectively. This enabled measurements of temperature and X H 2 O in the shock-heated air and trailing fireball at 500 kHz. Time histories of pressure, temperature, and H 2 O mole fraction were acquired at different standoff distances to quantify how the fireball evolved in space and time as well as to compare measured quantities between PETN and N5 fireballs. The standard deviation of temperature and X H 2 O during one representative test were found to be 17 K (1.3%) and 0.011 (5%), respectively. These measurements demonstrate this diagnostic’s ability to provide rapid and reliable measurements in harsh, highly transient post-detonation environments produced by solid explosives.

Schwartz, Charles J.↗
DOE OSTI2024

Covalent Triazine-Based Frameworks with Ru-tda Based Catalyst Anchored via Coordination Bond for Photoinduced Water Oxidation

Light-induced water splitting (hν-WS) for the production of hydrogen as a solar fuel is considered a promising sustainable strategy for the replacement of fossil fuels. An efficient system for hν-WS involves a photoactive material that, upon shining light, is capable of separating and transferring charges to catalysts for the hydrogen and oxygen evolution processes. Covalent triazine-based frameworks (CTFs) represent an interesting class of 2D organic light-absorbing materials that have recently emerged thanks to their tunable structural, optical and morphological properties. Typically, catalysts (Cat) are metallic nanoparticles generated in situ after photoelectroreduction of metal precursors or directly drop-casted on top of the CTF material to generate Cat-CTF assemblies. Here, in this work, the synthesis, characterization and photocatalytic performance of a novel hybrid material, Ru-CTF, is reported, based on a CTF structure featuring dangling pyridyl groups that allow the Ru-tda (tda is [2,2':6',2'“-terpyridine]-6,6'”-dicarboxylic acid) water oxidation catalyst (WOC) unit to coordinate via covalent bond. The Ru-CTF molecular hybrid material can carry out the light-induced water oxidation reaction efficiently at neutral pH, reaching values of maximum TOF of 17 h -1 and TONs in the range of 220 using sodium persulfate as a sacrificial electron acceptor.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Self-Assembly Driven Microlithography via Near-Infrared Light Activation

Current vat photopolymerization (VP) relies on UV or visible light to start the rapid crosslinking of liquid photocurable resins into 3D-printed structures. Here, we develop a self-assembly-driven photopatterning approach to photothermally generate polymeric solids by combining thermoplasmonic nanoparticles and thermoresponsive polymers, in which near-infrared (NIR) light activates thermoplasmonic heating of nanoparticles, triggering the irreversible self-assembly of thermoresponsive polymers into insoluble mesoglobules. A small amount of thermal initiator and crosslinker leads to irreversible self-assembly of polymer nanocomposites. NIR light offers deeper penetration and reduced scattering compared to UV, enabling more uniform curing of thicker or filled materials and expanded process control for composites or opaque systems. Thermoplasmonic heat generation is achieved using surface-modified gold nanorods (AuNRs) with a longitudinal localized surface plasmon resonance peak in the NIR region. Key variables such as polymer composition, molecular weight, physical interactions at the nanoparticle–polymer interface, which can be tuned by surface functionalization, AuNR concentration, and pH can be used to tailor the assembly behavior of these systems, including photothermal effect, flocculation, and cloud point temperature, and the mechanical properties of the final structures. Collectively, these results highlight a platform for photothermally-driven microlithography of polymer solids with diverse, tunable macroscopic properties, enabled by low-energy NIR light-activated self-assembly.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Suppressing phase disproportionation in quasi-2D perovskite light-emitting diodes

Electroluminescence efficiencies and stabilities of quasi-two-dimensional halide perovskites are restricted by the formation of multiple-quantum-well structures with broad and uncontrollable phase distributions. Here, we report a ligand design strategy to substantially suppress diffusion-limited phase disproportionation, thereby enabling better phase control. We demonstrate that extending the π-conjugation length and increasing the cross-sectional area of the ligand enables perovskite thin films with dramatically suppressed ion transport, narrowed phase distributions, reduced defect densities, and enhanced radiative recombination efficiencies. Consequently, we achieved efficient and stable deep-red light-emitting diodes with a peak external quantum efficiency of 26.3% (average 22.9% among 70 devices and cross-checked) and a half-life of ~220 and 2.8 h under a constant current density of 0.1 and 12 mA/cm 2 , respectively. Our devices also exhibit wide wavelength tunability and improved spectral and phase stability compared with existing perovskite light-emitting diodes. These discoveries provide critical insights into the molecular design and crystallization kinetics of low-dimensional perovskite semiconductors for light-emitting devices.

14 SOLAR ENERGY↗
DOE OSTI2020

Two-dimensional forms of robust CO 2 reduction photocatalysts

Photoelectrocatalysts that use sunlight to power the CO 2 reduction reaction will be crucial for carbon-neutral power and energy-efficient industrial processes. Scalable photoelectrocatalysts must satisfy a stringent set of criteria, such as stability under operating conditions, product selectivity, and efficient light absorption. Two-dimensional materials can offer high specific surface area, tunability, and potential for heterostructuring, providing a fresh landscape of candidate catalysts. From a set of promising bulk CO 2 reduction photoelectrocatalysts, we screen for candidate monolayers of these materials, then study their catalytic feasibility and suitability. For stable monolayer candidates, we verify the presence of visible-light band gaps, check that band edges can support CO 2 reduction, determine exciton binding energies, and compute surface reactivity. We find visible light absorption for SiAs, ZnTe, and ZnSe monolayers, and that due to a lack of binding, CO selectivity is possible. We thus identify SiAs, ZnTe, and ZnSe monolayers as targets for further investigation, expanding the chemical space for CO 2 photoreduction candidates.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Water-Stable 1D Hybrid Tin(II) Iodide Emits Broad Light with 36% Photoluminescence Quantum Efficiency

The optical and light emission properties of tin and lead halide perovskites are remarkable because of the robust room-temperature (RT) performance, broad wavelength tunability, high efficiency, and good quenching resistance to defects. These highly desirable attributes promise to transform current light-emitting devices, phosphors, and lasers. One disadvantage in most of these materials is the sensitivity to moisture. Here, we report a new air-stable one-dimensional (1D) hybrid lead-free halide material (DAO)Sn 2 I 6 (DAO, 1,8-octyldiammonium) that is resistant to water for more than 15 h. The material exhibits a sharp optical absorption edge at 2.70 eV and a strong broad orange light emission centered at 634 nm, with a full width at half-maximum (fwhm) of 142 nm (0.44 eV). The emission has a long photoluminescence (PL) lifetime of 582 ns, while the intensity is constant over a very broad temperature range (145–415 K) with a photoluminescence quantum yield (PLQY) of at least 20.3% at RT. Above 415 K the material undergoes a structural phase transition from monoclinic (C2/c) to orthorhombic (Ibam) accompanied by a red shift in the band gap and a quench in the photoluminescence emission. Density functional theory calculations support the trend in the optical properties and the 1D electronic nature of the structure, where the calculated carrier effective masses along the inorganic chain are significantly lower than those perpendicular to the chain. As a result, thin films of the compound readily fabricated from solutions exhibit the same optical properties, but with improved PLQY of 36%, for a 60 nm thick film, among the highest reported for lead-free low-dimensional 2D and 1D perovskites and metal halides.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Luminescent MOFs (LMOFs): recent advancement towards a greener WLED technology

The replacement of traditional incandescent, halogen and fluorescent lamps by white light emitting diodes (WLEDs) is expected to reduce the global electricity consumption by one-third by 2030, according to the US Department of Energy. The current WLED technology uses rare-earth element (REE) based phosphor materials, which, not only is cost-intensive but also constitutes an environmental concern. Hence, researchers are in a quest for a new-generation of opto-electronic materials that can replace the conventional phosphors in WLEDs and thus aim towards a cleaner and more energy efficient lighting technology for the future. Luminescent metal–organic frameworks (LMOFs) have recently emerged as a new sub-class of MOFs which have demonstrated enormous potential for applications in sensing, imaging, optoelectronics and in solid-state lighting (SSL) technology. LMOFs could be game changers as lighting phosphors due to advantages such as high luminescence quantum yield, tunable excitation and emission which can be achieved by rational design and optimization of metal centers, linkers, and the guest molecules, facile fabrication into devices, and structural robustness. These clear advantageous features of LMOFs make them score over other contemporary materials, and enable them to be futuristic phosphor materials for WLED technology. Here, in this feature article, we will provide an overview of the most recent developments of LMOF-based phosphor materials for SSL with a special focus on WLED technology. The emphasis will be centered around REE-free LMOFs, as the aim is to direct the attention of the readers towards a more viable and greener lighting technology.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Additive Manufacturing of Self‐Sensing Carbon Fiber Composites

Carbon fiber-reinforced polymer (CFRP) composites have gained substantial attention across various industries owing to their exceptional mechanical properties and lightweight nature. The emergence of additive manufacturing technologies brings new opportunities to the industry, offering advantages such as design freedom, rapid prototyping, and customization. However, the fabrication of CFRP composites through 3D printing techniques poses challenges pertaining to low resolution and limitations in complex geometry realization. This work introduces digital light processing printing as a versatile, high-resolution method ideal for CFRP composite fabrication. Furthermore, the development and characterization of CFRP are focused on and the manipulation of mechanical properties through variations in matrix resins and fiber loadings is investigated, showcasing the versatility of CFRP composites for tailored applications. Additionally, the integration of self-sensing capabilities in CFRP structures is explored, which opens up opportunities for applications in smart components for automotive and structural health monitoring.

carbon fiber composites↗
DOE OSTI2021

Growth-Controlled Broad Emission in Phase-Pure Two-Dimensional Hybrid Perovskite Films

Two-dimensional hybrid metal halide perovskites (2D perovskites) are attractive for light-emitting devices and other applications because their emission is tunable across the visible spectrum. The emission profile of 2D perovskites can be broadened via a variety of mechanisms and is further complicated by the presence of impurities. Here, the challenge of making phase-pure films in Ruddlesden–Popper phases [(A') 2 (A) n–1 B n X 3n+1 structure] is overcome by using a single A/A'-site cation, ethylammonium (EA), whose optimal size also prohibits the formation of off-target phases. In the (EA) 2 (EA) n–1 Pb n Br 3n+1 family, the low-energy, broad emission observed in bulk crystals is reduced in spin-cast, polycrystalline films. This decrease in broad emission, attributed to phonon-mediated processes, is correlated with the strain in polycrystalline films that is observed by X-ray scattering. Photothermal deflection spectroscopy shows that strain also increases the electronic disorder near the free exciton absorbance. Broad emission in films can be recovered by slowing growth kinetics, which removes the strain acquired from spin-casting and increases the domain size. Furthermore, these results help extend the utility of 2D perovskites by suggesting design rules for the growth of thin films with the targeted phase and emission.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Energy Transfer Mechanisms in Large Low-Bandgap Polymers from Time-Resolved Experiments and Nonadiabatic Molecular Dynamics Calculations

Conjugated polymers offer unprecedented chemical tunability for modulating energy transfer in a multitude of infrared light applications. In this work, we use a combination of time-resolved spectroscopic experiments and nonadiabatic molecular dynamics calculations to probe the photochemistry and nonradiative transitions in a recently synthesized narrow bandgap donor–acceptor conjugated polymer based on alternating cyclopentadithiophene and electronegative benzothiadiazole heterocycles. Using large-scale semi-empirical nonadiabatic molecular dynamics, which can treat a large 260-atom hexamer, we calculate an S 5 → S 1 lifetime of 34.75 fs, which is consistent with our time-resolved spectroscopic data. Our simulations suggest that vibronic motions of the central carbons in the cyclopentadithiophene functional groups are predominantly involved in the nonradiative transitions, and the excitation becomes more localized on a monomer fragment over time. The combined use of time-resolved experiments and nonadiabatic molecular dynamics calculations in this work provides mechanistic insight into chemical functionalities that can be tuned to enhance energy transfer in other prospective low-bandgap polymer materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Flash Formation of I-Rich Clusters during Multistage Halide Segregation Studied in MAPbI 1.5 Br 1.5

Wide band gap mixed halide perovskites such as MAPb(I 1–x Br x ) 3 sparked great research interest because of their outstanding optoelectronic properties, ease of fabrication, and band gap tunability. Their application thus far is however limited by light-induced halide segregation in which microscopic clusters with a high iodide content are formed and act as recombination centers. The key mechanism(s) underlying this halide segregation process are still debated. Here, we present a study on the photoluminescence evolution in MAPb(I 1.5 Br 1.5 ) perovskites with varying microstructures under constant illumination at room temperature and at elevated temperature. Our findings reveal a more complicated picture of the segregation mechanism occurring in three stages instead of two as commonly reported. The process starts with a flash formation of I-rich domains. Following is a rapid blue shift before the gradual and typically observed red shift occurs. The evolution of the three stages is fully reversible in the dark and is also present at elevated temperatures (50 °C). We explain the existence of multiple stages during light-induced halide segregation by natural compositional fluctuations of the halides and the formation of halide clusters with a dynamically changing distribution in I–Br content. The variation in the I–Br ratio depends on the grain size and film heterogeneity. Overall, these findings add further details in the quest of unraveling the underlying segregation mechanism(s), which need to be identified to stabilize halides in wide band gap perovskites.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Ligand Controls Excited Charge Carrier Dynamics in Metal-Rich CdSe Quantum Dots: Computational Insights

Small metal-rich semiconducting quantum dots (QDs) are promising for solid-state lighting and single-photon emission due to their highly tunable yet narrow emission line widths. Nonetheless, the anionic ligands commonly employed to passivate these QDs exert a substantial influence on the optoelectronic characteristics, primarily owing to strong electron–phonon interactions. In this work, we combine time-domain density functional theory and nonadiabatic molecular dynamics to investigate the excited charge carrier dynamics of Cd 28 Se 17 X 22 QDs (X = HCOO – , OH – , Cl – , and SH – ) at ambient conditions. These chemically distinct but regularly used molecular groups influence the dynamic surface-ligand interfacial interactions in Cd-rich QDs, drastically modifying their vibrational characteristics. The strong electron–phonon coupling leads to substantial transient variations at the band edge states. The strength of these interactions closely depends on the physicochemical characteristics of passivating ligands. Consequently, the ligands largely control the nonradiative recombination rates and emission characteristics in these QDs. Our simulations indicate that Cd 28 Se 17 (OH) 22 has the fastest nonradiative recombination rate due to the strongest electron–phonon interactions. Conversely, QDs passivated with thiolate or chloride exhibit considerably longer carrier lifetimes and suppressed nonradiative processes. The ligand-controlled electron–phonon interactions further give rise to the broadest and narrowest intrinsic optical line widths for OH and Cl-passivated single QDs, respectively. Finally, obtained computational insights lay the groundwork for designing appropriate passivating ligands on metal-rich QDs, making them suitable for a wide range of applications, from blue LEDs to quantum emitters.

36 MATERIALS SCIENCE↗