Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “transient analysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Investigation of the OECD/NEA PWR MOX/UO{sub 2} core transient benchmark using a coupled whole core pin-by-pin route in WIMS

This paper investigates the new CAMELOT coupling route developed in WIMS, which uses prepared tabulated cross-sections combined with the flux solver MERLIN module and the integrated sub-channel thermal hydraulics solver ARTHUR module to solve for the coupled core state. This coupling route is applied to the OECD/NEA pressurized water reactor (PWR) core transient benchmark exercise, involving 3-D neutronics and thermal-hydraulics analysis of a full-sized PWR core featuring MOX fuel at various core states, as well as simulating a control rod ejection transient. Analysis of the results for each part of the benchmark demonstrate that the high-resolution pin-by-pin analysis used in WIMS closely matches the other participants in the benchmark, with differences of between 20-200 pcm for k-effective, 1-2.5% RMS difference for assembly-averaged powers, 2-8% difference in rod worth calculations, < 200 ppm for calculations of critical boron concentration, zero difference in delayed neutron fraction calculation and a very close match for power response to the rod ejection transient. This is the first application of the WIMS-CAMELOT approach for the transient analysis of a full-sized reactor and as such further improvements such as reducing computational cost through parallelization, optimisation and memory reduction, are currently in active development. This paper demonstrates the accuracy and flexibility of the CAMELOT coupling route, providing a straightforward and consistent user image that can be easily used for a variety of modelling problems involving coupled neutronics and thermal-hydraulics. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗
DOE OSTI2023

Significant Roles of Surface Hydrides in Enhancing the Performance of Cu/BaTiO 2.8 H 0.2 Catalyst for CO 2 Hydrogenation to Methanol

Abstract Tuning the anionic site of catalyst supports can impact reaction pathways by creating active sites on the support or influencing metal‐support interactions when using supported metal nanoparticles. This study focuses on CO 2 hydrogenation over supported Cu nanoparticles, revealing a 3‐fold increase in methanol yield when replacing oxygen anions with hydrides in the perovskite support (Cu/BaTiO 2.8 H 0.2 yields ~146 mg/h/gCu vs. Cu/BaTiO 3 yields ~50 mg/h/gCu). The contrast suggests that significant roles are played by the support hydrides in the reaction. Temperature programmed reaction and isotopic labelling studies indicate that BaTiO 2.8 H 0.2 surface hydride species follow a Mars van Krevelen mechanism in CO 2 hydrogenation, promoting methanol production. High‐pressure steady‐state isotopic transient kinetic analysis (SSITKA) studies suggest that Cu/BaTiO 2.8 H 0.2 possesses both a higher density and more active and selective sites for methanol production compared to Cu/BaTiO 3 . An operando high‐pressure diffuse reflectance infrared spectroscopy (DRIFTS)‐SSITKA study shows that formate species are the major surface intermediates over both catalysts, and the subsequent hydrogenation steps of formate are likely rate‐limiting. However, the catalytic reactivity of Cu/BaTiO 2.8 H 0.2 towards the formate species is much higher than Cu/BaTiO 3 , likely due to the altered electronic structure of interface Cu sites by the hydrides in the support as validated by density functional theory (DFT) calculations.

He, Yang↗
DOE OSTI2022

Crystallographic dependence of CO 2 hydrogenation pathways over HCP-Co and FCC-Co catalysts

We report efficient conversion of CO 2 is of great significance for sustainable supply of chemicals and fuels. While Co-based catalysts are known to be effective for CO hydrogenation in Fischer-Tropsch synthesis, they work very differently in CO 2 hydrogenation. This study reveals a crystallographic dependence of reaction pathways for CO 2 hydrogenation on Co catalyst showing a new type of structure sensitivity and structure-activity-selectivity relationship for CO 2 conversion to chemicals and fuels. The experimental work on CO 2 conversion including steady-state isotopic transient kinetic analysis (SSITKA) using 13 C-labeled CO 2 shows a preferential CH 4 formation over HCP-Co but dominant CO formation over FCC-Co. The density functional theory calculations indicate that CO 2 does dissociate directly into chemisorbed CO * and O * on both HCP-Co and FCC-Co, but the CO * intermediates on HCP-Co prefer to be hydrogenated to form CH 4 whereas the CO* on FCC-Co preferentially desorb to form CO. The significantly altered adsorption strength of CO * due to the presence of chemisorbed O * and CO 2 * species on the catalyst surface is responsible for the mechanistic disconnection in product selectivity between the CO 2 and CO hydrogenation over Co catalysts. This study also shows that the addition of K to Co diminishes the direct impact of Co crystal structure, but improves the selectivity to C 2 + hydrocarbons along with higher CO 2 conversion. This seems to result from another pathway originating from HCOO* intermediate from bonding interaction of surface Co atoms with carbon in CO 2 , leading to the formation of CH x * whose coupling subsequently give rises to C 2 + products. The present study sheds new light into the crystallographic structural sensitivity of CO 2 hydrogenation towards the rational design of more selective catalysts for CO 2 conversion.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Granger Causality for prediction in Dynamic Mode Decomposition: Application to power systems

Here, the dynamic mode decomposition (DMD) technique extracts the dominant modes characterizing the innate dynamical behavior of the system within the measurement data. For appropriate identification of dominant modes from the measurement data, the DMD algorithm necessitates ensuring the quality of the input measurement data sequences. On that account, for validating the usability of the dataset for the DMD algorithm, the paper proposed two conditions: Persistence of excitation (PE) and the Granger Causality Test (GCT). The virtual data sequences are designed with the hankel matrix representation such that the dimensions of the subspace spanning the essential system modes are increased with the addition of new state variables. The PE condition provides the lower bound for the trajectory length, and the GCT provides the order of the model. Satisfying the PE condition enables estimating an approximate linear model, but the predictability with the identified model is only assured with the temporal causation among data searched with GCT. The proposed methodology is validated with the application for coherency identification (CI) in a multi-machine power system (MMPS), an essential phenomenon in transient stability analysis. The significance of PE condition and GCT is demonstrated through various case studies implemented on 22 bus six generator system.

24 POWER TRANSMISSION AND DISTRIBUTION↗
DOE OSTI2020

Interpretation of bottom-hole temperature data from CO 2 injection projects

Although bottom-hole temperature (BHT) data is routinely collected with bottom-hole pressure (BHP) data during CO 2 injection in geological storage projects, it is seldom analyzed in a quantitative manner. However, the BHP and BHT signals do exhibit correlated behavior. This work proposes a practical approach for using BHT data from warmback (no injection) periods, in conjunction with the amplitude of BHP and BHT changes during the preceding injection event, to estimate formation permeability. The methodology is demonstrated using data from the AEP Mountaineer project in USA where CO 2 injection was carried out into a saline aquifer. Estimated permeability values from the proposed approach are in good agreement with those obtained from transient pressure analysis of BHP data from the falloff period.

42 ENGINEERING↗
DOE OSTI2024

Steady-state fuel performance analyses for the preliminary fuel concept of general atomics fast modular reactor

Here this manuscript presents the fuel performance analysis results of the General Atomics Fast Modular Reactor (FMR) based on an axi-symmetric (2D-RZ) geometry. Three fuel performance model sets that fit the FMR fuel specifications best, i.e., a BISON baseline model set, a BISON diffusion enhancement model set, and a BISON-FASTGRASS model set, were identified and evaluated against a series of relevant experimental cases featuring high burnup and low irradiation temperature conditions. The three BISON-based model sets were then utilized to conduct a comprehensive fuel performance analysis of the FMR fuel under normal operation including the shutdown/restarting periods for refueling. The evaluation of the fuel performance parameters, represented by temperature, internal pressure, stress, and strain, shows that the FMR fuel maintains its thermal and mechanical integrity during normal operation. Technology gaps and limitations are also discussed to guide future efforts for extending the performance analysis to transient scenarios as well as improving the fuel performance evaluation through experiments.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2024

Theory of Ion-Mediated Segmental Localization, Activated Structural Relaxation, and the Glass Transition in Polymerized Ionic Liquids

Here we combine polymer integral equation theory for structural correlations with a force-level theory for activated segmental relaxation to construct a microscopic theory for how ions modify the onset of segmental localization, the polymer alpha relaxation time, and glass transition temperature, T g , in dry polymerized ionic liquids (PolyILs). Our most important findings concerning the behavior of T g are (i) a weak dependence on anion–cation Coulomb attraction strength due to strong decoupling of ion and segmental dynamics, (ii) strong reduction with increasing mobile ion size due to both plasticization effects and weakening of ion-modified monomer caging, and (iii) increase with backbone rigidity and intrachain dynamic cooperativity. We quantitatively estimate T g variations as ion size and polymer static and dynamic rigidity are widely varied. The experimental data of 19 PolyILs are organized into a specific pattern consistent with the theoretical predictions with glass transition temperatures varying over a very wide range (~250 K) as observed experimentally. Based on the theoretical results, suggestions are made concerning the search for high conductivity Li- or Na-based PolyILs based on further lowering of T g via new polymer synthesis. Calculations of the alpha time as a function of packing fraction reveal the dynamic fragility increases for larger mobile ions, a more flexible backbone, and/or a smaller degree of intrachain dynamic cooperativity, as a consequence of the increasing importance of collective elasticity in determining the activation barrier. An analysis of transient segmental localization and a crossover to activated dynamics reveals similar, but not identical, trends as predicted at the laboratory vitrification timescale.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

In Situ Strong Metal–Support Interaction (SMSI) Affects Catalytic Alcohol Conversion

Strong metal–support interactions (SMSIs) and catalyst deactivation have been heavily researched for decades by the catalysis community. The promotion of SMSIs in supported metal oxides is commonly associated with H 2 treatment at high temperature (>500 °C), and catalyst deactivation is commonly attributed to sintering, leaching of the active metal, and overoxidation of the metal, as well as strong adsorption of reaction intermediates. Alcohols can reduce metal oxides, and thus here we have hypothesized that catalytic conversion of alcohols can promote SMSIs in situ . In this work we show, via IR spectroscopy of CO adsorption and electron energy loss spectroscopy (EELS), that during 2-propanol conversion over Pd/TiO 2 coverage of Pd sites occurs due to SMSIs at low reaction temperatures (as low as ~ 190 °C). The emergence of SMSIs during the reaction ( in situ ) explains the apparent catalyst deactivation when the reaction temperature is varied. A steady-state isotopic transient kinetic analysis (SSITKA) shows that the intrinsic reactivity of the catalytic sites does not change with temperature when SMSI is promoted in situ ; rather, the number of available active sites changes (when a TiO x layer migrates over Pd NPs). SMSI generated during the reaction fully reverses upon exposure to O 2 at room temperature for ~15 h, which may have made their identification elusive up to now.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Selective and Stable In-Promoted Fe Catalyst for Syngas Conversion to Light Olefins

A selective and stable alumina-supported In-promoted Fe catalyst (10 mol % In based on Fe) was discovered for converting syngas (2:1 H 2 /CO ratio) to olefins with high selectivity (45% with CO 2 included) and a remarkable stability (72 h run) at a CO conversion of 10% at 400 °C and 5 bar. The X-ray photoelectron spectroscopy results indicated that incorporating In into Fe catalysts changed the chemical bonding state of Fe and Fe/In composition near the surface layers, which affected the catalytic reactivity. Steady-state isotopic transient kinetic analysis showed that more stable CHx fragments are present on the catalyst surface when incorporating In into Fe, which can promote C–C coupling reaction toward olefins. Our study demonstrates that introducing In into Fe catalysts on Al 2 O 3 support can lower CO activation abilities. It has more impacts on lowering hydrogenation activity, which permits more C–C couplings and like of “ene” hydrogenation. Furthermore, weakening CO adsorption both in terms of sites and strength encouraged CO toward hydrocarbons rather than CO 2 .

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Mechanism for Acetone and Crotonaldehyde Production during Steam Reforming of Ethanol over La 0.7 Sr 0.3 MnO 3–x Perovskite: Evidence for a Shared C4 Aldol Addition Intermediate

Here a mechanistic study was conducted on the catalytic conversion of ethanol over La 0.7 Sr 0.3 MnO 3–x perovskite catalysts in the presence and absence of water. The study sought insights into the path of C–C coupling toward acetone and crotonaldehyde and also into clarifying whether the lack of previous reports of C–C coupling over La 0.7 Sr 0.3 MnO 3–x (100) could be due to a “pressure gap”. Several types of experiments were performed at 400–800 K: flow experiments with a torr range reactant gas flown over La 0.7 Sr 0.3 MnO 3–x powders; ultra-high vacuum experiments with continuous gas exposures to a La 0.7 Sr 0.3 MnO 3–x (100) single-crystal sample; and torr range continuous gas exposures to a La 0.7 Sr 0.3 MnO 3–x (100) single-crystal sample. When ethanol and water were flown over La 0.7 Sr 0.3 MnO 3–x powders at 400–800 K, the products detected were ethene, acetaldehyde, acetone, crotonaldehyde, CO, CO 2 , and H 2 . Acetone was catalytically produced over both the La 0.7 Sr 0.3 MnO 3–x powder and the La 0.7 Sr 0.3 MnO 3–x (100) single-crystal sample at temperatures of 700–800 K when reaction conditions were on the order of 1 Torr of reactant gas and with an excess of water relative to ethanol (1 ethanol/9 water). Isotopic labeling with deuterium was used to gain insights into the C–C coupling reaction mechanism and paths in species with three and four carbons (C 3 and C 4 species). Additionally, steady-state isotopic transient kinetic analysis (SSITKA) experiments + simulations using carbon labeling of the ethanol feed were performed. Three mechanistic paths were considered for the C–C coupling step: the first two paths, A and B, involve coupling between two intermediates which are both in oxygen vacancies; and the third path, C, involves coupling between one intermediate in an oxygen vacancy and one intermediate outside of an oxygen vacancy. The results suggest that the dominant path to the C 3 product, acetone, depends on the conditions. The less active path (attributed to path A or B) occurs at 600–700 K and involves coupling between two irreversibly bound species. The more active path (attributed to path C) requires an excess of water, becomes dominant at 600–800 K, and involves coupling between one irreversibly bound species and one reversibly bound species. Based on these various observations from experiments and simulations, an elementary step is proposed for acetone formation involving a previously unreported C 4 transition state that is formed after aldol addition. Density functional theory calculations were performed based on this hypothesis, and it confirmed that this specific and previously unreported aldol addition path to acetone does exist and that this path consistent with the experimental data. In this path, C–C formation occurs to create a C 4 intermediate that is bound to an oxygen vacancy, then a hydrogen transfer with C–C bond breaking occurs that results in the production of the acetone molecule. The proposed mechanism is also consistent with the experimental observation that acetone formation has a greater than first-order dependence on the water vapor pressure.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Nature of Reactive Hydrogen for Ammonia Synthesis over a Ru/C12A7 Electride Catalyst

Recently, there have been renewed interests in exploring new catalysts for ammonia synthesis under mild conditions. Electride-based catalysts are among the emerging ones. Ruthenium particles supported on an electride composed of a mixture of calcium and aluminum oxides (C12A7) have attracted great attention for ammonia synthesis due to their facile ability in activating N2 under ambient pressure. However, the exact nature of the reactive hydrogen species and the role of electride support still remain elusive for this catalytic system. Here, we report for the first time that the surface-adsorbed hydrogen, rather than the hydride encaged in the C12A7 electride, plays a major role in ammonia synthesis over the Ru/C12A7 electride catalyst with the aid of in situ neutron scattering techniques. Combining in situ neutron diffraction, inelastic neutron spectroscopy, density functional theory (DFT) calculation, and temperature-programmed reactions, the results provide direct evidence for not only the presence of encaged hydrides during ammonia synthesis but also the strong thermal and chemical stability of the hydride species in the Ru/C12A7 electride. Steady state isotopic transient kinetic analysis (SSITKA) of ammonia synthesis showed that the coverage of reactive intermediates increased significantly when the Ru particles were promoted by the electride form (coverage up to 84%) of the C12A7 support rather than the oxide form (coverage up to 15%). Such a drastic change in the intermediate coverage on the Ru surface is attributed to the positive role of electride support where the H2 poisoning effect is absent during ammonia synthesis over Ru. The finding of this work has significant implications for understanding catalysis by electride-based materials for ammonia synthesis and hydrogenation reactions in general.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

A Robust Methodology to Elucidate Kinetics of Room Temperature Electrochemical Propane Adsorption on Platinum

Electrocatalytic activation of alkanes can further decarbonize chemical manufacturing by leveraging affordable renewable electricity and readily available shale gas reserves in the United States. Earlier works have identified the unique role of Pt in adsorbing and activating alkanes, like propane, at room temperature in acidic, aqueous electrolytes, revealing spontaneous formation of deeply dehydrogenated propane-derived surface species with an intact C 3 - backbone. Although an adsorption mechanism was hypothesized, it has not been explicitly investigated to date, preventing the quantification of kinetic rate parameters. A robust methodology to investigate and benchmark propane adsorption kinetics on Pt is critical for the rational design of electrocatalysts that exhibit higher selectivity toward desired partially oxidized products. Herein, we analyze an oxidative current transience that appears during the adsorption of propane on Pt in aqueous electrochemical conditions and develop a methodology that elucidates the adsorption mechanism and enables quantification of rate parameters such as order dependences and apparent activation barriers. This method yields an expected first-order dependence with respect to propane concentration at low coverage and reveals a second-order dependence with respect to the concentration of surface active sites. Additionally, the apparent activation barrier for propane adsorption was calculated using an Arrhenius analysis of the current transience under temperature control. The experimentally measured activation barrier of 35 kJ mol –1 is in excellent agreement with the theoretical barrier calculated by density functional theory (DFT). The kinetic analysis was extended, via the use of transition state theory, to extract entropy and enthalpy of activation, yielding consistent results with the proposed two-step adsorption mechanism and DFT calculations. These results demonstrate reliable quantification of kinetic parameters for electrocatalytic activation of C–H bonds in alkanes that can be employed for rational catalyst development for a versatile range of electrocatalytic conditions.

alkane activation↗
DOE OSTI2020

Time–series Analysis of Volume Change at Brady Hot Springs, Nevada, USA using Geodetic Data from 2003 – 2018

Brady Hot Springs geothermal field has exhibited subsidence, as measured by interferometric synthetic aperture radar (InSAR). Previous studies have examined both the temporal evolution of the deformation from 2004 through 2016 and the spatial extent of the deformation, directly relating the observed subsidence to volumetric changes below the surface. We extend the modeling at Brady to analyze a data set of interferometric pairs spanning from the end of 2003 through 2018. We examine spatial and temporal trends in the observed deformation by time–series analysis of each of the 1656 cubic voxels in a parameterized elastic dislocation model to identify areas where the subsurface volume changes as a function of time. Joint time–series analysis of Global Positioning System and InSAR pairs confirm significant changes in rates of volume change during time intervals when well operations were varied. Here, the rate of subsidence increases with increased injection, consistent with the identification of thermal contraction of the rock matrix as the dominant driving mechanism. Conversely, the modeled volume increases when pumping ceases, suggesting thermal expansion of the rock matrix.

58 GEOSCIENCES↗
DOE OSTI2021

Evidence for a thermally driven charge-density-wave transition in 1T-TaS 2 thin-film devices: Prospects for GHz switching speed

We report on the room-temperature switching of 1T-TaS 2 thin-film charge-density-wave devices, using nanosecond-duration electrical pulsing to construct their time-resolved current–voltage characteristics. The switching action is based upon the nearly commensurate to incommensurate charge-density-wave phase transition in this material, which has a characteristic temperature of 350 K at thermal equilibrium. For sufficiently short pulses, with rise times in the nanosecond range, self-heating of the devices is suppressed, and their current–voltage characteristics are weakly nonlinear and free of hysteresis. This changes as the pulse duration is increased to ~200 ns, where the current develops pronounced hysteresis that evolves nonmonotonically with the pulse duration. By combining the results of our experiments with a numerical analysis of transient heat diffusion in these devices, we clearly reveal the thermal origins of their switching. In spite of this thermal character, our modeling suggests that suitable reduction of the size of these devices should allow their operation at GHz frequencies.

36 MATERIALS SCIENCE↗
DOE OSTI2023

SALT2 versus SALT3: updated model surfaces and their impacts on type Ia supernova cosmology

ABSTRACT For the past decade, SALT2 has been the most common model used to fit Type Ia supernova (SN Ia) light curves for dark energy analyses. Recently, the SALT3 model was released, which upgraded a number of model features but has not yet been used for measurements of dark energy. Here, we evaluate the impact of switching from SALT2 to SALT3 for a SN cosmology analysis. We train SALT2 and SALT3 on an identical training sample of 1083 well-calibrated Type Ia supernovae, ensuring that any differences found come from the underlying model framework. We publicly release the results of this training (the SALT ‘surfaces’). We then run a cosmology analysis on the public Dark Energy Survey 3-Yr Supernova data sample (DES-SN3YR), and on realistic simulations of those data. We provide the first estimate of the SN + CMB systematic uncertainty arising from the choice of SALT model framework (i.e. SALT2 versus SALT3), Δw = + 0.001 ± 0.005 – a negligible effect at the current level of dark energy analyses. We also find that the updated surfaces are less sensitive to photometric calibration uncertainties than previous SALT2 surfaces, with the average spectral energy density dispersion reduced by a factor of two over optical wavelengths. This offers an opportunity to reduce the contribution of calibration errors to SN cosmology uncertainty budgets.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2021

Impact Analysis of Data Integrity Attacks on FACTS-based Wide-Area Voltage Control System

Energy management system (EMS) consists of several wide-area control applications that serve as a backbone for security, stability, and reliability of the power system. Wide-area voltage control system (WAVCS), one of the critical wide-area applications, operates in coordination with local Flexible AC Transmission System (FACTS) devices to provide voltage security and optimal management of active and reactive power resources. Since the WAVCS relies on wide-area communication and data sharing devices, possible cybersecurity vulnerabilities have to be addressed to ensure the closed-loop operation of WAVCS. In this paper, we present a methodology for performing an impact analysis of cyber-attacks in WAVCS cybersecurity. In particular, different types of data integrity attacks, such as malicious tripping, fault replay, and signal altering attacks, are considered, and detailed impact analysis is conducted in a testbed environment using the Kundur's four machine two-area system. For performing an impact analysis, the transient voltage stability of the sensitive bus voltage is studied, followed by the quantitative assessment and severity ranking using the voltage profile index. Our experimental evaluation reveals that the data integrity attacks on control signals exhibit a higher attack severity than on the measurement signals. Further, the severity of these attacks varies with nature (static or dynamic), location, and types of attacks.

24 POWER TRANSMISSION AND DISTRIBUTION↗
DOE OSTI2020

Four-Switch Buck-Boost Converter Based on Model Predictive Control with Smooth Mode Transition Capability

Four-switch buck-boost converter supports both voltage step-up and step-down functionalities, but it suffers from mode transfer challenge that would need reliable mode detection when designed to operate in multi different modes. In this paper, a novel control method based on model predictive current control is proposed for such converter with inherent smooth mode transfer capability without extra design on mode detection and transfer scheme. Modulator and mode detection are replaced by an optimization process through cost function. This largely simplifies the design and makes it easily implemented. Therefore, seamless transfer between buck and boost modes is achieved with many other system level benefits. Simulation and experimental results are provided to verify the effectiveness of proposed method for the four-switch buck-boost converter.

42 ENGINEERING↗