SEARCH · Engineering Papers

Results for “time-dependent problem”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9

All sources NASA NTRS DOE OSTI

NASA NTRS1972

An analysis of the relaxation of laminar boundary layer on a flat plate after passage of an interface with application to expansion-tube flows

The relaxation of the accelerating-gas boundary layer to the test-gas boundary layer over a flat plate in an expansion tube is analyzed. Several combinations of test gas and acceleration gas are considered. The problem is treated in two conically similar limits: (1) when the time lag between the arrival of the shock and the interface at the leading edge of the plate is very large, and (2) when this lag is negligible. The time-dependent laminar-boundary-layer equations of a binary mixture of perfect gases are taken as the flow-governing equations. This coupled set of differential equations, written in terms of the Lam-Crocco variables, has been solved by a line-relaxation finite-difference techniques. The results presented include the Stanton number and the local skin-friction coefficient as functions of shock Mach number and the nondimensional distance-time variable. The results indicate that more than 95 percent of the test-gas boundary layer exists over a length, measured from the leading edge of the plate, equal to about three-tenths of the distance traversed by the interface in the free stream.

Gupta, R. N.↗

NASA NTRS1973

Thermoelastic flutter models for elements of flexible satellites

Models of thermally induced flutter of the flexible elements of a satellite, such as beams, circular plates, and cylindrical shells have been obtained. These models form the necessary blocks for analyzing the motion of satellites. The heat input is considered to be caused by solar radiations. The partial differential equations for all the elements of the satellite are linear in the space dependent variables and nonlinear in the time-dependent variables. These equations are coupled through the motion of the center of mass of the satellite. Galerkin's method has been used to remove the space-dependence of these equations. In the succeeding paper, a further reduction of these equations is made into singular perturbation equations, which are amenable to solution for complex problems of extremely large number of degrees of freedom.

Huang, T. C.↗

NASA NTRS1975

Finite difference methods for transient signal propagation in stratified dispersive media

Explicit difference equations are presented for the solution of a signal of arbitrary waveform propagating in an ohmic dielectric, a cold plasma, a Debye model dielectric, and a Lorentz model dielectric. These difference equations are derived from the governing time-dependent integro-differential equations for the electric fields by a finite difference method. A special difference equation is derived for the grid point at the boundary of two different media. Employing this difference equation, transient signal propagation in an inhomogeneous media can be solved provided that the medium is approximated in a step-wise fashion. The solutions are generated simply by marching on in time. It is concluded that while the classical transform methods will remain useful in certain cases, with the development of the finite difference methods described, an extensive class of problems of transient signal propagating in stratified dispersive media can be effectively solved by numerical methods.

Lam, D. H.↗

NASA NTRS1975

Modern control concepts in hydrology

Two approaches to an identification problem in hydrology are presented, based upon concepts from modern control and estimation theory. The first approach treats the identification of unknown parameters in a hydrologic system subject to noisy inputs as an adaptive linear stochastic control problem; the second approach alters the model equation to account for the random part in the inputs, and then uses a nonlinear estimation scheme to estimate the unknown parameters. Both approaches use state-space concepts. The identification schemes are sequential and adaptive and can handle either time-invariant or time-dependent parameters. They are used to identify parameters in the Prasad model of rainfall-runoff. The results obtained are encouraging and confirm the results from two previous studies; the first using numerical integration of the model equation along with a trial-and-error procedure, and the second using a quasi-linearization technique. The proposed approaches offer a systematic way of analyzing the rainfall-runoff process when the input data are imbedded in noise.

Duong, N.↗

NASA NTRS1977

Elastic wave propagation in a highly scattering medium - A diffusion approach

The propagation of elastic waves in the moon, where the first seismograms were characterized by the presence of a long coda attributed to strongly scattered waves, is modeled with the aid of the time-dependent equation of radiative transfer. The average energy density as a function of time and space is described by the diffusion equation with linear dissipation on the assumption that all the energy present has been scattered many times and the time and distance scales of the problem are long compared to the scales of the scattering process. Ultrasonic experiments in the laboratory confirm the applicability of the formalism.

Dainty, A. M.↗

NASA NTRS1977

A Navier-Stokes solution of the three-dimensional viscous compressible flow in a centrifugal compressor impeller

A two-dimensional time-dependent computer code was utilized to calculate the three-dimensional steady flow within the impeller blading. The numerical method is an explicit time marching scheme in two spatial dimensions. Initially, an inviscid solution is generated on the hub blade-to-blade surface by the method of Katsanis and McNally (1973). Starting with the known inviscid solution, the viscous effects are calculated through iteration. The approach makes it possible to take into account principal impeller fluid-mechanical effects. It is pointed out that the second iterate provides a complete solution to the three-dimensional, compressible, Navier-Stokes equations for flow in a centrifugal impeller. The problems investigated are related to the study of a radial impeller and a backswept impeller.

Harp, J. L., Jr.↗

NASA NTRS1979

Numerical methods for large-scale, time-dependent partial differential equations

A survey of numerical methods for time dependent partial differential equations is presented. The emphasis is on practical applications to large scale problems. A discussion of new developments in high order methods and moving grids is given. The importance of boundary conditions is stressed for both internal and external flows. A description of implicit methods is presented including generalizations to multidimensions. Shocks, aerodynamics, meteorology, plasma physics and combustion applications are also briefly described.

Turkel, E.↗

NASA NTRS1981

Influence of exit impedance on finite difference solutions of transient acoustic mode propagation in ducts

The time-dependent governing acoustic-difference equations and boundary conditions are developed and solved for sound propagation in an axisymmetric (cylindrical) hard-wall duct without flow and with spinning acoustic modes. The analysis begins with a harmonic sound source radiating into a quiescent duct. This explicit iteration method then calculates stepwise in real time to obtain the steady solutions of the acoustic field. The transient method did not converge to the steady-state solution for cutoff acoustic duct modes. This has implications as to its use in a variable-area duct, where modes may become cutoff in the smal-area portion of the duct. For single cutoff mode propagation the steady-state impedance boundary condition produced acoustic reflections during the initial transient that caused finite instabilities in the numerical calculations. The stability problem is resolved by reformulating the exit boundary condition. Example calculations show good agreement with exact analytical and numerical results for forcing frequencies above, below, and nearly at the cutoff frequency.

Baumeister, K. J.↗

NASA NTRS1981

Submillisecond measurements of system optical modulation functions in mosaic focal plane arrays

Measurements of system optical modulation functions (MTF, SWR) may be distorted by time-dependent environmental effects (thermal, vibration, flexure) and by electronics drift. Fast data collection may therefore be advantageous by minimizing drift time. The problem of fast data collection is accentuated when modulation data must be taken on a large number of detectors in a focal plane array. A method has been developed for the generation and storage of knife edge data from focal plane arrays, where data collection time per detector is in the submillisecond range. Once knife edge collects are completed, MTF response is found using conventional convolution techniques. SWR is obtained directly from knife edge response using a computerized simulation algorithm which bypasses use of MTF harmonics. Requirements for detector electronics speed, damping, and dynamic range are considered.

Thurlow, P. E.↗

NASA NTRS1982

Development of low-frequency kernel-function aerodynamics for comparison with time-dependent finite-difference methods

Finite difference methods for unsteady transonic flow frequency use simplified equations in which certain of the time dependent terms are omitted from the governing equations. Kernel functions are derived for two dimensional subsonic flow, and provide accurate solutions of the linearized potential equation with the same time dependent terms omitted. These solutions make possible a direct evaluation of the finite difference codes for the linear problem. Calculations with two of these low frequency kernel functions verify the accuracy of the LTRAN2 and HYTRAN2 finite difference codes. Comparisons of the low frequency kernel function results with the Possio kernel function solution of the complete linear equations indicate the adequacy of the HYTRAN approximation for frequencies in the range of interest for flutter calculations.

Bland, S. R.↗

NASA NTRS1981

VNAP2: A Computer Program for Computation of Two-dimensional, Time-dependent, Compressible, Turbulent Flow

A computer program, VNAP2, for calculating turbulent (as well as laminar and inviscid), steady, and unsteady flow is presented. It solves the two dimensional, time dependent, compressible Navier-Stokes equations. The turbulence is modeled with either an algebraic mixing length model, a one equation model, or the Jones-Launder two equation model. The geometry may be a single or a dual flowing stream. The interior grid points are computed using the unsplit MacCormack scheme. Two options to speed up the calculations for high Reynolds number flows are included. The boundary grid points are computed using a reference plane characteristic scheme with the viscous terms treated as source functions. An explicit artificial viscosity is included for shock computations. The fluid is assumed to be a perfect gas. The flow boundaries may be arbitrary curved solid walls, inflow/outflow boundaries, or free jet envelopes. Typical problems that can be solved concern nozzles, inlets, jet powered afterbodies, airfoils, and free jet expansions. The accuracy and efficiency of the program are shown by calculations of several inviscid and turbulent flows. The program and its use are described completely, and six sample cases and a code listing are included.

Cline, M. C.↗

NASA NTRS1983

A time-split finite-volume algorithm for three-dimensional flow-field simulation

A general finite-volume algorithm is developed for solving three-dimensional, time-dependent, compressible Navier-Stokes equations for high Reynolds number flows over an arbitrary geometry. This algorithm adapts MacCormack's (1982) explicit-implicit scheme to a time-split, three-dimensional finite-volume concept in a general coordinate system. It is shown that the thin-layer approximation in all three spatial directions significantly reduces the evaluation of viscous terms and allows the algorithm to solve more complicated geometries with all boundaries in two or all three directions. The calculated results using this method are found to be in good agreement with the experimental measurements of a blunt-fin induced shock wave and boundary-layer interaction problems. Observations of the existence of peak pressure, primary horseshoe and secondary vortices, and reversed supersonic zones show that computational fluid dynamics can effectively supplement the wind tunnel tests for aerodynamic design as well as for understanding basic fluid dynamics.

Hung, C. M.↗

NASA NTRS1984

Navier-Stokes Simulation of Homogeneous Turbulence on the CYBER 205

A computer code which solves the Navier-Stokes equations for three dimensional, time-dependent, homogenous turbulence has been written for the CYBER 205. The code has options for both 64-bit and 32-bit arithmetic. With 32-bit computation, mesh sizes up to 64 (3) are contained within core of a 2 million 64-bit word memory. Computer speed timing runs were made for various vector lengths up to 6144. With this code, speeds a little over 100 Mflops have been achieved on a 2-pipe CYBER 205. Several problems encountered in the coding are discussed.

Wu, C. T.↗

NASA NTRS1979

Solution of 3-dimensional time-dependent viscous flows. Part 1: Investigation of candidate algoriths

There is considerable interest in developing a numerical scheme for solving the time dependent viscous compressible three dimensional flow to aid in the design of helicopter rotors. Numerical algorithms are examined to determine their overall suitability for the efficient and routine solution of an appropriate system of partial differential equations. It is concluded that a consistently split time linearized block implicit scheme using either quintic B spline collocation or the generalized operator compact implicit approach to generate a fourth order accurate algorithm is particularly well suited for use on the present problem. High cell Reynolds number behavior leads to favoring the generalized operator compact implicit approach over the quintic B spline collocation method.

Weinberg, B. C.↗

NASA NTRS1984

A variational formulation for time-dependent climate models

A variational principle for time dependent diffusion problems is presented and is demonstrated by applying it to simple seasonal climate models. Two cases are treated. The first, a North-Coakley-type model with constant properties, is used as a tutorial example for the application of the technique. For the second case, heat capacity and thermal conductivity are considered to be latitude dependent in order to treat the effects of land/ocean distribution on the seasonal temperature distribution over the earth. The variational equations are derived and approximate analytical solutions are developed which delineate the influences of the physical asymmetries of the hemispheres in producing an asymmetric annual cycle.

Smith, G. L.↗

NASA NTRS1984

Numerical modeling of laser thermal propulsion flows

An review of the problems associated with modeling laser thermal propulsion flows, a synopsis of the status of such models, and the attributes of a successful model are presented. The continuous gaseous hydrogen laser-supported combustion wave (LSCW) thruster, for which a high-energy laser system (preferably space-based) should exist by the time the propulsion technology is developed, is considered in particular. The model proposed by Raizer (1970) is based on the assumptions of one-dimensional flow at constant pressure with heat conduction as the principal heat transfer mechanism. Consideration is given to subsequent models which account for radiative transfer into the ambient gas; provide a two-dimensional generalization of Raizer's analysis for the subsonic propagation of laser sparks in air; include the effect of forward plasma radiation in a one-dimensional model; and attempt a time-dependent (elliptic) solution of the full Navier-Stokes equations for the flow in a simple axisymmetric thruster. Attention is also given to thruster and nozzle flow models and thermodynamic and transport properties.

Mccay, T. D.↗

NASA NTRS1984

Physical processes in the strong magnetic fields of accreting neutron stars

Analytical formulae are fitted to observational data on physical processes occurring in strong magnetic fields surrounding accreting neutron stars. The propagation of normal modes in the presence of a quantizing magnetic field is discussed in terms of a wave equation in Fourier space, quantum electrodynamic effects, polarization and mode ellipticity. The results are applied to calculating the Thomson scattering, bremsstrahlung and Compton scattering cross-sections, which are a function of the frequency, angle and polarization of the magnetic field. Numerical procedures are explored for solving the radiative transfer equations. When applied to modeling X ray pulsars, a problem arises in the necessity to couple the magnetic angle and frequency dependence of the cross-sections with the hydrodynamic equations. The use of time-dependent averaging and approximation techniques is indicated.

Meszaros, P.↗

NASA NTRS1985

A complex T-matrix derivation of a resonance amplitude

Time-dependent perturbation-theory techniques are used to derive a compact expression, valid to arbitrary order and displaying time dependence explicitly, for a quantum-mechanical transition amplitude applicable to the description of resonances. A solution representing a complex-energy generalization of the usual real-energy (nonresonant) amplitude is obtained and generalized to all orders by introducing a complex-energy T matrix. Applications to physical problems such as the extension of the Fermi golden rules to resonances (Norbury and Deutchman, 1984); pion production in relativistic nucleus-nucleus collisions (Norbury et al., 1985); and the determination of resonant cross sections for nuclear, atomic, or molecular processes involving the formation and decay of intermediate discrete or continuum states are indicated.

Norbury, J. W.↗