Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “temperature dependence”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Temperature Dependence of FDR Response for Thermally Aged Low-Voltage Cables

Frequency Domain Reflectometry (FDR) has attracted significant attention for use in nuclear power plants (NPPs) for non-destructive cable health monitoring. However, cable aging detection using FDR faces challenges due to its high sensitivity to environmental factors such as temperature, vibrations, proximity to other cables, and so on. This work aims to evaluate the influence of measurement temperature on the FDR reflected signal in a low voltage cable undergoing accelerated thermal aging. A 100 ft long multi-core low-voltage unshielded power cable insulated with flame retardant ethylene propylene rubber (FR-EPR) and covered by a chloro-polyethylene (CPE) jacket was selected for this study. The cable was energized during aging by a 480 VAC 3-phase motor, and a 30 ft mid-section of this cable was routed through an air circulating oven held at 140 °C for up to an effective aging time of 62 days. FDR measurements were taken periodically with the oven on (at 140 °C) and with the oven off (at 22 °C). A comparative analysis of data collected at both temperatures showed that the FDR response was strongly dependent on measurement temperature. FDR measurements at ambient temperature showed large peaks corresponding to impedance changes in the aged section of the cable after 3 days of aging. These peaks continued to rise steadily with increasing aging time. However, for measurements taken at 140 °C, slowly rising peaks in the oven region (aged section) were observed only after a lead time of 23 days of aging. This work highlights the importance of measurement temperature on the performance of FDR as a condition monitoring tool for aging cables.

Sriraman, Aishwarya↗
DOE OSTI2021

Temperature dependent x-ray fluorescence

A method and system for determining temperature are provided. The method comprises using an x-ray source to irradiate a sample of a material with x-rays. Photon fluorescence produced by the sample in response to the x-ray irradiation is detected by a number of photon detectors. Based on the detected fluorescence a temperature of the sample is determined according to a predetermined relationship between photon fluorescence and temperature for the material.

Gabet Hoffmeister, Kathryn N.↗
DOE OSTI2025

Assessing time-dependent temperature profile predictions using reduced transport models for high performing NSTX plasmas

Time-dependent, predictive simulations were performed with the 1.5D tokamak integrated modeling code TRANSP on a large set of well-analyzed, high performing discharges from the National Spherical Torus Experiment (NSTX) in order to evaluate how well modern reduced transport models can reproduce experimentally observed temperature profiles in spherical tokamaks. Overall, it is found that simulations using the Multi-Mode Model (MMM) more consistently agree with the NSTX observations than those using the Trapped Gyro-Landau Fluid (TGLF) model, despite TGLF requiring orders of magnitude greater computational cost. When considering all examined discharges, MMM has median overpredictions of electron temperature (T e ) and ion temperature (T i ) profiles of 28% and 27%, respectively, relative to the experiment. TGLF overpredicts T e by 46%, with much larger variance than MMM, and underpredicts T i by 25%. As the ratio of kinetic to magnetic field pressure (β) is increased across NSTX discharges, TGLF predicts lower T e and significant flattening of the T i profile, conflicting with NSTX observations. When using an electrostatic version of TGLF, both T e and T i are substantially overpredicted, underscoring the importance of electromagnetic turbulence in the high β spherical tokamak regime. Additionally, calculations with neural net surrogate models for TGLF were performed outside of TRANSP with a time slice flux matching transport solver, finding better agreement with experiment than the TRANSP simulations, highlighting the impact of different transport solvers and simulation techniques. Furthermore, the reasonable agreement with experiment of temperature profiles predicted by MMM motivates a more detailed examination of the sensitivities of the TRANSP simulations with MMM to different NSTX plasma regimes in a companion paper (Lestz et al Plasma Phys. Control. Fusion 67 105030), in preparation for self-consistent, time-dependent predictive modeling of NSTX-U scenarios.

Lestz, J. B. [General Atomics, San Diego, CA (Unit↗
DOE OSTI2020

Rapid Shifts in the Temperature Dependence of Locomotor Performance in an Invasive Frog, Xenopus laevis , Implications for Conservation

Abstract Temperature is a critical abiotic factor impacting all aspects of the biology of organisms, especially in ectotherms. As such, it is an important determinant of the potential invasive ability of organisms and may limit population expansion unless organisms can physiologically respond to changes in temperature either through plasticity or by adapting to their novel environment. Here, we studied the African clawed frog, Xenopus laevis, which has become invasive on a global scale. We compared adults from an invasive population of western France with individuals from two populations in the native range in South Africa. We measured the thermal dependence of locomotor performance in adults given its relevance to dispersal, predator escape, and prey capture. Our results show significant differences in the limits of the 80% performance breadth interval for endurance with the French population showing a left shift in its limits congruent with the colder climate experienced in France. The French invasive population was introduced only about 40 years ago suggesting a rapid shift in the thermal physiology. Given that all individuals were acclimated under laboratory conditions at 23°C for 2 months this suggests that the invasive frogs have adapted to their new environment. These data may allow the refinement of physiologically informed species distribution models permitting better estimates of future ranges at risk of invasion.

Araspin, Laurie↗
DOE OSTI2021

Temperature-dependent collective magnetization reversal in a network of ferromagnetic nanowires

The collective behavior of geometrically frustrated magnetization in connected networks of ferromagnetic nanowires, known as artificial spin ice, leads to complex magnetotransport behavior in those structures. Here, we present temperature- and current-dependent magnetotransport studies on a connected square artificial spin-ice system and correlate our observations to micromagnetic simulations. We find that the field at which the lattice magnetization collectively switches increases as the temperature is lowered. Our experimental findings highlight the importance of the global and local temperatures for the onset of a collective magnetization reversal in the connected system. These studies may also provide useful insights into novel storage concepts and applications in neuromorphic computing.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Temperature-dependent solvent reorganization entropies, free energies, and transition dipole strengths for the photoexcitation of Reichardt’s dye B30

Absorption spectra of the solvatochromic dye 2,6-diphenyl-4-2,4,6-triphenyl-1-pyridinophenolate (B30) were measured in seven solvents of varying polarity over temperature ranging from each solvent’s freezing point to 300 K. The excitation energies and their variances allowed calculations of the solvent reorganization energies, reorganization free energies and reorganization entropies as functions of temperature. The entropies of solvent packing around the chromophore are found to make major contributions to the reorganization free energies. The variances of the excitation energies depend only weakly on temperature, in disagreement with an expression that is often used for solvent reorganization free energies. Polar solvents reduce the transition dipole strength of B30’s long-wavelength absorption band, probably because interactions with the solvent enhance the charge-transfer character of the transition. The dipole strength drops further at low temperatures.

Chemistry↗
DOE OSTI2026

Quantifying Temperature Dependence of Pu(IV) Absorbance Spectra for Advanced Online Monitoring of Nuclear Processes

This article presents a systematic study of Pu(IV) absorbance spectral features as a function of temperature to develop an understanding of this parameter’s effect on chemometric models that can be used as online monitoring tools to support nuclear processing. The descriptive and predictive models that provide real-time feedback of these processes are usually constructed with data collected in conditions typical of a laboratory environment, which can differ drastically from a processing environment. To assess the impact of temperature on Pu(IV) absorbance spectra, 11 samples of Pu(IV) were synthesized with varying HNO 3 concentrations ranging from 0.6 to 9.5 M and heated between 15 and 45 °C. Ultraviolet (UV)–visible (vis)–near-infrared (NIR) absorption spectra collected at different HNO 3 concentrations and temperatures revealed that features associated with Pu(IV) are sensitive to temperature at all HNO 3 concentrations and that changes in features depend on HNO 3 concentration. The contributions of temperature and HNO 3 concentration to variation in Pu(IV) spectral features were evaluated using the principal component analysis of spectra that were baseline-corrected with an asymmetric least-squares method. Furthermore, predictive modeling for HNO 3 concentration with partial least-squares regression of UV–vis–NIR spectra highlighted the importance of accounting for temperature in the calibration set to optimize model performance. This methodology constitutes a new, systematic approach to account for the effect of temperature on the absorption spectra of metal ions and is useful for process monitoring applications in many industries.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Temperature-dependent formation of gradient structures with anomalous hardening in an Al–Si alloy

The temperature effect on forming gradient structure in an Al-Si alloy during surface severe deformation is studied in this report. The intermediate temperature (473 K) produces the steepest gradient structure by an anomalous hardening on the top layer compared to lower (300 K) and higher temperature (673 K) counterparts. Our analysis shows profuse aluminum oxide particles in the top layer of the gradient structure under 473 K and thus lead to anomalous hardening by oxide-dispersion strengthening. Here, the counterintuitive enhancement of strengthening at the intermediate temperature is explained by the dynamic interplay between thermal-driven, mechanical-aided oxidation and the wear-induced loss of surface materials as a function of temperature, which yields a critical processing temperature to achieve the steepest gradient structure.

36 MATERIALS SCIENCE↗
DOE OSTI2024

On the Lineshapes of Temperature-Dependent Transport Measurements of Superconductors Under Pressure

Recent reports of superconductivity in the vicinity of room temperature have been the subject of discussion by the community. Specifically, features in the resistance-temperature (R-T) relations have raised questions. We show that many of these features can arise from previously unaccounted-for dynamic effects associated with the AC transport techniques often used in high- pressure experiments. These dynamic AC effects can cause the apparent resistance (R apparent ) to diverge from the DC resistance (R DC ), sharpen measured superconducting transitions, and produce other features in the measured R-T response. Here, we also show that utilizing the full output of phase-sensitive transport measurements provides a valuable probe of superconducting samples in difficult-to-measure systems.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2022

The temperature-dependent conformational ensemble of SARS-CoV-2 main protease (M pro )

The COVID-19 pandemic, instigated by the SARS-CoV-2 coronavirus, continues to plague the globe. The SARS-CoV-2 main protease, or M pro , is a promising target for the development of novel antiviral therapeutics. Previous X-ray crystal structures of M pro were obtained at cryogenic temperature or room temperature only. Here we report a series of high-resolution crystal structures of unliganded M pro across multiple temperatures from cryogenic to physiological, and another at high humidity. We interrogate these data sets with parsimonious multiconformer models, multi-copy ensemble models, and isomorphous difference density maps. Our analysis reveals a perturbation-dependent conformational landscape for M pro , including a mobile zinc ion interleaved between the catalytic dyad, mercurial conformational heterogeneity at various sites including a key substrate-binding loop, and a far-reaching intramolecular network bridging the active site and dimer interface. Our results may inspire new strategies for antiviral drug development to aid preparation for future coronavirus pandemics.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2022

Temperature-Dependent Reaction Pathways in FeS 2 : Reversibility and the Electrochemical Formation of Fe 3 S 4

The present study has used a variety of characterization techniques to determine the products and reaction pathways involved in the rechargeable Li–FeS 2 system. We revisit both the initial lithiation and subsequent cycling of FeS 2 employing an ionic liquid electrolyte to investigate the intermediate and final charge products formed under varying thermal conditions (room temperature to 100 °C). The detection of Li 2 S and hexagonal FeS as the intermediate phases in the initial lithiation and the electrochemical formation of greigite, Fe 3 S 4 , as a charge product in the rechargeable reaction differ significantly from previous reports. The conditions for Fe 3 S 4 formation are shown to be dependent on both the temperature (~60 °C) and the availability of sulfur to drive a FeS to Fe 3 S 4 transformation. Upon further cycling, Fe 3 S 4 transforms to a lower sulfur content iron sulfide phase, a process which coincides with the loss of sulfur based on the new reaction pathways established in this work. The connection between sulfur loss, capacity fade, and charge product composition highlights the critical need to retain sulfur in the active material upon cycling.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Carrier recombination dynamics and temperature dependent optical properties of InAs–GaSb heterostructures

Heterostructures with two dissimilar materials could offer unprecedented properties if one can carefully synthesize these heterostructures with atomically smooth interfaces and reduced number of recombination centers. InAs/GaSb-based heterostructures have technological importance for long wavelength infrared photodetectors if one can synthesize these materials with high-optical quality and high-carrier lifetime. In this work, the InAs/GaSb heterostructures with a different number of heterointerfaces and growth conditions were grown by solid source molecular beam epitaxy using valved cracker sources for both arsenic and antimony. Precise control of growth parameters and shutter sequences enabled abrupt InAs/GaSb heterointerfaces, as supported by a high-resolution transmission electron microscopic study. The temperature and power-dependent optical properties by photoluminescence (PL) spectroscopic analysis of InAs/GaSb heterostructures with 4 and 28 heterointerfaces displayed donor to the acceptor and the exciton bound to complex defects (V Ga Ga Sb ) 0 . Since the optical transition in PL measurements serves to determine the quality of the material, and the observed excitonic transitions from these InAs/GaSb heterostructures is an indication of high-quality materials. The high-carrier lifetimes of 139 ns to 185 ns from InAs/GaSb heterostructures were measured using microwave photoconductivity decay (μ-PCD) technique at room temperature. The observed increase in carrier lifetime is due to the decreasing number of Ga-related carrier recombination centers or defect complexes. This is further supported by the PL spectroscopic study. In addition, the carrier lifetime with different injection levels is supported by Shockley–Read–Hall recombination. We report these InAs/GaSb heterostructures with high-optical quality and high-carrier lifetimes would offer a path for the development of high-performance infrared photodetectors.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Complete separation of benzene-cyclohexene-cyclohexane mixtures via temperature-dependent molecular sieving by a flexible chain-like coordination polymer

Abstract The separation and purification of C6 cyclic hydrocarbons (benzene, cyclohexene, cyclohexane) represent a critically important but energy intensive process. Developing adsorptive separation technique to replace thermally driven distillation processes holds great promise to significantly reduce energy consumption. Here we report a flexible one-dimensional coordination polymer as an efficient adsorbent to discriminate ternary C6 cyclic hydrocarbons via an ideal molecular sieving mechanism. The compound undergoes fully reversible structural transformation associated with removal/re-coordination of water molecules and between activated and hydrocarbon-loaded forms. It exhibits distinct temperature- and adsorbate-dependent adsorption behavior which facilitates the complete separation of benzene, cyclohexene and cyclohexane from their binary and ternary mixtures, with the record-high uptake ratios for C 6 H 6 /C 6 H 12 and C 6 H 10 /C 6 H 12 in vapor phase and highest binary and ternary selectivities in liquid phase. In situ infrared spectroscopic analysis and ab initio calculations provide insight into the host-guest interactions and their effect on the preferential adsorption and structural transformation.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Temperature-dependent iron motion in extremophile rubredoxins – no need for ‘corresponding states’

Extremophile organisms are known that can metabolize at temperatures down to – 25 °C (psychrophiles) and up to 122 °C (hyperthermophiles). Understanding viability under extreme conditions is relevant for human health, biotechnological applications, and our search for life elsewhere in the universe. Information about the stability and dynamics of proteins under environmental extremes is an important factor in this regard. Here we compare the dynamics of small Fe-S proteins – rubredoxins – from psychrophilic and hyperthermophilic microorganisms, using three different nuclear techniques as well as molecular dynamics calculations to quantify motion at the Fe site. The theory of ‘corresponding states’ posits that homologous proteins from different extremophiles have comparable flexibilities at the optimum growth temperatures of their respective organisms. Although ‘corresponding states’ would predict greater flexibility for rubredoxins that operate at low temperatures, we find that from 4 to 300 K, the dynamics of the Fe sites in these homologous proteins are essentially equivalent.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2025

Temperature Dependence of 239 Pu NMR Parameters in PuO 2

Solid-state 239 Pu NMR spectra of crystalline PuO 2 have been recorded over temperatures from 11 to 295 K with better than part per thousand resolution. These experiments represent the first independent detection of 239 Pu NMR in PuO 2 since the original report by Yasuoka and co-workers and extend the NMR observations to higher temperatures where recent theoretical explanations of the enigmatic magnetism and electronic structure of PuO 2 may be evaluated. The sensitivity achieved in these experiments was sufficient to measure the sinusoidal dependence of the NMR signal amplitude on the radiofrequency pulse length, which allows the determination of the nuclear g factor and magnetic moment of 239 Pu. These results demonstrate the use of NMR with an open-shell f element to explore subtle magnetic effects in plutonium materials of both technological and scientific significance.

Actinides↗
DOE OSTI2024

Utah FORGE: Temperature-Dependent Fracture Seismicity from Fluid Injection Experiments

This dataset contains experimental data from fluid injection experiments conducted to investigate the influence of temperature on fracture seismicity. The experiments were performed on granite samples from Utah FORGE. The samples were prepared with a 30-degree inclined fracture and subjected to controlled stress and temperature conditions. Data were collected under three distinct temperature settings: 24 C, 78 C, and 137 C. During the experiments, a constant confining pressure of 10 MPa and a constant shear stress at 80% of the shear strength of the sample were maintained. Pore pressure was incrementally increased at a rate of 300 kPa every three minutes to simulate fluid injection. Temperature was raised rapidly and then stabilized for the duration of each test. The dataset includes shear stress and displacement measurements under each temperature condition, along with supplementary figures illustrating the experimental setup and time-series plots of pressures and temperature.

15 GEOTHERMAL ENERGY↗