Synchrotron X-ray topography characterization of high quality ammonothermal-grown gallium nitride substrates
Abstract not provided
SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Abstract not provided
Not Available
High-energy synchrotron X-ray diffraction was utilized to study the mechanical response of the f.c.c delta hydride phase, the intermetallic precipitation with hexagonal C14 lave phase and the alpha-Zr phase in the Zircaloy-4 materials with a hydride rim/blister structure near one surface of the material during in-situ uniaxial tension experiment at 200 degrees C. The f.c.c delta was the only hydride phase observed in the rim/blister structure. The conventional Rietveld refinement was applied to measure the macro-strain equivalent response of the three phases. Two regions were delineated in the applied load versus lattice strain measurement: a linear elastic strain region and region that exhibited load partitioning. Load partitioning was quantified by von Mises analysis. The three phases were observed to have similar elastic modulus at 200 degrees C.
Highlights: • Differently oriented grains were studied in situ using synchrotron diffraction. • The effect of thermo-mechanical history on hydrogen location in α-Zr is considered. • Hydrogen redistribution in alpha-Zr matrix during thermal cycling discussed. - Abstract: Hydride distribution in a dual-phase hydrided Zr-2.5wt%Nb has been studied. Samples having different prior thermo-mechanical processing history were thermally cycled within a 86 keV X-ray photon beam. The diffraction patterns generated with this technique allow the evaluation of the relative quantity of hydrides within differently oriented grain sets. It was found that hydrides exist primarily within two different α-Zr grain-sets. One grain-set has its {0002} α-Zr direction oriented very close to the hoop direction while the other exists within a plane approximately 20° away from it. During thermal cycling, the proportion or hydrides oriented within different grain sets was shown to change from the distribution associated with the prior thermomechanical processing, to that corresponding to the current thermal cycling conditions. It was also shown that the ability for hydrogen to redistribute in the matrix correlates with the cooling rate of the specimen.
The nickel-base Alloy 617 has been considered as the lead candidate structural material for the intermediate heat exchanger (IHX) of the Very-High-Temperature Reactor (VHTR). In order to assess the long-term performance of Alloy 617, thermal aging experiments up to 10,000 h in duration were performed at 1000 degrees C. Subsequently, in-situ synchrotron wide-angle X-ray scattering (WAXS) tensile tests were carried out at ambient temperature. M23C6 carbides were identified as the primary precipitates, while a smaller amount of M6C was also observed. The aging effects were quantified in several aspects: (1) macroscopic tensile properties, (2) volume fraction of the M23C6 Phase, (3) the lattice strain evolution of both the matrix and the M23C6 precipitates, and (4) the dislocation density evolution during plastic deformation. The property-microstructure relationship is described with a focus on the evolution of the M23C6 phase. For aging up to 3000 h, the yield strength (YS) and ultimate tensile strength (UTS) showed little variation, with average values being 454 MPa and 787 MPa, respectively. At 10,000 h, the YS and UTS reduced to 380 MPa and 720 MPa, respectively. The reduction in YS and UTS is mainly due to the coarsening of the M23C6 Precipitates. After long term aging, the volume fraction of the M23C6 phase reached a plateau and its maximum internal stress was reduced, implying that under large internal stresses the carbides were more susceptible to fracture or decohesion from the matrix. Finally, the calculated dislocation densities were in good agreement with transmission electron microscopy (TEM) measurements. The square roots of the dislocation densities and the true stresses displayed typical linear behavior and no significant change was observed in the alloys in different aging conditions.
Trace elements, particularly metals, play an important role in a large variety of cellular processes in a biological system. In the context of biological organisms and tissues, the term trace element means that over the entire organisms an element is present at only trace levels, 100ppm or lower. Trace element distribution and content can be analyzed using several techniques, for example, visible light optical fluorescence imaging, energy-dispersive X-ray spectroscopy on an election microscope, synchrotron-based X-ray fluorescence (XRF) imagine,
Carbon compounds are ubiquitous and occur in a diversity of chemical forms in many systems including ancient and historic materials ranging from cultural heritage to paleontology. Determining their speciation cannot only provide unique information on their origin but may also elucidate degradation processes. Synchrotron-based X-ray absorption near-edge structure (XANES) spectroscopy at the carbon K-edge (280–350 eV) is a very powerful method to probe carbon speciation. However, the short penetration depth of soft X-rays imposes stringent constraints on sample type, preparation, and analytical environment. A hard X-ray probe such as X-ray Raman scattering (XRS) can overcome many of these difficulties. Here we report the use of XRS at ~6 keV incident energy to collect carbon K-edge XANES data and probe the speciation of organic carbon in several specimens relevant to cultural heritage and natural history. This methodology enables the measurement to be done in a nondestructive way, in air, and provides information that is not compromised by surface contamination by ensuring that the dominant signal contribution is from the bulk of the probed material. Using the backscattering geometry at large photon momentum transfer maximizes the XRS signal at the given X-ray energy and enhances nondipole contributions compared to conventional XANES, thereby augmenting the speciation sensitivity. The capabilities and limitations of the technique are discussed. As a result, we show that despite its small cross section, for a range of systems the XRS method can provide satisfactory signals at realistic experimental conditions. XRS constitutes a powerful complement to FT-IR, Raman, and conventional XANES spectroscopy, overcoming some of the limitations of these techniques.
Explore the source record for details and available documents.
Abstract not provided
Precipitation of silver ions simultaneously with chloride and bromide ions in ethylene glycol at a mild temperature (e.g., 60 degrees C) has been successfully demonstrated for the synthesis of silver chlorobromide (AgClxBr1-x, 0 < x < 1) nanoparticles, which is realized by injecting a AgNO3 solution into a solution containing both halogen ions. The injection rate of the AgNO3 solution has been determined to be critical for controlling the uniformity of AgClxBr1-x nanoparticles. Time-resolved in situ high-energy synchrotron X-ray diffraction has been applied, for the first time, to quantitatively monitor the reaction kinetics of nanocrystal formation. The real-time results shed light on the fact that the injection rate of AgNO3 solution significantly influences the nucleation and growth processes, and thus the quality of resulting AgClxBr1-x nanoparticles. Specifically, fast injection enables the complete addition of AgNO3 solution to the reaction solution before the nucleation process starts, leading to a good separation of nucleation and growth and thus the formation of uniform AgClxBr1-x nanocubes with well-defined composition and narrow size distribution. By contrast, slow injection results in a continuous addition of AgNO3 solution to the reaction solution even after nucleation starts, leading to continuous multiple nucleation/growth processes and thus the formation of AgClxBr1-x nanoparticles with broad dimensional and morphological distributions.
Recent research showed that fracture of sand particles plays a significant role in determining the plastic bulk volumetric changes of granular materials under different loading conditions. One of the major tools used to better understand the influence of particle fracture on the behavior of granular materials is discrete-element modeling (DEM). This paper employed the bonded block model (BBM) to simulate the fracture behavior of sand. Each sand particle is modeled as an agglomerate of rigid blocks bonded at their contacts using the linear-parallel contact model, which can transmit both moment and force. DEM simulated particles closely matched the actual three-dimensional (3D) shape of sand particles acquired using high-resolution 3D synchrotron microcomputed tomography (SMT). Results from unconfined one-dimensional (1D) compression of a single synthetic silica cube were used to calibrate the model parameters. Particle fracture was investigated for specimens composed of three sand particles that were loaded under confined 1D compression. Breakage energy measured from DEM models matched well with that measured experimentally. The paper studied the effects of contact loading condition and particle interaction on the fracture mode of particles using BBM that can closely capture the 3D shape of real sand particles.
Nonisothermal densification in 8% yttria doped zirconia (8YSZ) particulate matter of 250 nm median particle size was studied under 215 V/cm dc electric field and 9 Degree-Sign C/min heating rate, using time-resolved in-situ high temperature energy dispersive x-ray diffractometry with a polychromatic 200 keV synchrotron probe. Densification occurred in the 876-905 Degree-Sign C range, which resulted in 97% of the theoretical density. No local melting at particle-particle contacts was observed in scanning electron micrographs, implying densification was due to solid state mass transport processes. The maximum current draw at 905 Degree-Sign C was 3 A, corresponding to instantaneous absorbed power density of 570 W/cm{sup 3}. Densification of 8YSZ was accompanied by anomalous elastic volume expansions of the unit cell by 0.45% and 2.80% at 847 Degree-Sign C and 905 Degree-Sign C, respectively. The anomalous expansion at 905 Degree-Sign C at which maximum densification was observed is characterized by three stages: (I) linear stage, (II) anomalous stage, and (III) anelastic recovery stage. The densification in stage I (184 s) and II (15 s) was completed in 199 s, while anelastic relaxation in stage III lasted 130 s. The residual strains ({epsilon}) at room temperature, as computed from tetragonal (112) and (211) reflections, are {epsilon}{sub (112)} = 0.05% and {epsilon}{sub (211)} = 0.13%, respectively. Time dependence of (211) and (112) peak widths ({beta}) show a decrease with both exhibiting a singularity at 905 Degree-Sign C. An anisotropy in (112) and (211) peak widths of {l_brace} {beta}{sub (112)}/{beta}{sub (211)}{r_brace} = (3:1) magnitude was observed. No phase transformation occurred at 905 Degree-Sign C as verified from diffraction spectra on both sides of the singularity, i.e., the unit cell symmetry remains tetragonal. We attribute the reduction in densification temperature and time to ultrafast ambipolar diffusion of species arising from the superposition of mass fluxes due to Fickian diffusion, thermodiffusion (Soret effect), and electromigration, which in turn are a consequence of a superposition of chemical, temperature, and electrical potential gradients. On the other hand, we propose defect pile-up at particle-particle contacts and subsequent tunneling as a mechanism creating the 'burst-mode' discontinuous densification at the singularities observed at 847 and 905 Degree-Sign C.
Abstract not provided
We calculate and plot the synchrotron power, P {sub n}u, the absorption coefficient, alpha{sub n}u, and the source function, S {sub n}u, for a power-law distribution of charged particles with Lorentz parameter values gamma{sub 1} <= gamma <= gamma{sub 2}. For this purpose, we define parametric functions Z{sub p} (x, eta), H{sub p} (x, eta), and Y{sub p} (x, eta) with eta = gamma{sub 2}/gamma{sub 1}, such that P {sub n}u propor to Z{sub p} (gamma{sup -2} {sub 1}nu/nu{sub 0}, eta), alpha{sub n}u propor to H{sub p} (gamma{sup -2} {sub 1}nu/nu{sub 0}, eta), and S {sub n}u propor to Y{sub p} (gamma{sup -2} {sub 1}nu/nu{sub 0}, eta). Corresponding asymptotic forms are also calculated and plotted for three frequency ranges, i.e., x << 1, 1 << x << eta{sup 2}, and x >> eta{sup 2}, especially in the case of finite parameter eta. Asymptotic forms of the middle range are possible for functions Z{sub p} and Y{sub p} for p>1/3, and for function H{sub p} for all positive values of index p. A characteristic value, eta {sub c}(p, epsilon) (with epsilon << 1), is then defined for each of the above functions so that for eta approx> eta {sub c}(p, epsilon) the middle range asymptotic forms could be considered. Further calculation details are also presented and discussed.