Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “surface operations”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9

Thermodynamic stability and structures of iron chloride surfaces: A first-principles investigation

In this study, we report a comprehensive density functional theory investigation of the structure and thermodynamic stability of FeCl{sub 2} and FeCl{sub 3} surfaces. Calculated lattice constants and heats of formation for bulk FeCl{sub 2} and FeCl{sub 3} were found to be in relatively good agreement with experimental measurements. We provide structural parameters for 15 distinct FeCl{sub 2} and FeCl{sub 3} surfaces along the three low-index orientations. The optimized geometries for all surfaces are compared with analogous bulk values. Ab initio atomistic thermodynamic calculations have been carried out to assess the relative thermodynamic stability of FeCl{sub 2} and FeCl{sub 3} surfaces under practical operating conditions of temperatures and pressures. The FeCl{sub 2} (100-Cl) surface is found to afford the most stable configuration at all experimentally accessible gas phase conditions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

CERN’s Linac4 H{sup −} sources: Status and operational results

Two volume sources equipped with DESY and CERN plasma generators and a low voltage electron dump were operated at 45 kV in the Linac4 tunnel and on a dedicated test stand. These volume sources delivered approximately 20 mA and ensured the commissioning of the Radio Frequency Quadrupole accelerator and of the first section of the Drift Tube Linac. CERN’s prototype of a cesiated surface source equipped with this electron dump was operated continuously from November 2013 to April 2014 on the ion source test stand and is being commissioned in the Linac4 tunnel. Before cesiation, the prototype conditioned in volume mode provided up to 30 mA H{sup −} beam. Short cesiations, of the order of 10 mg effectively reduced the intensity of co-extracted electrons down to 2 - 8 times the H{sup −} current; this cesiated surface operation mode delivered up to 60 mA H{sup −} beam. An H{sup −} beam of the order of 40 mA was sustained up to four weeks operation with 500 μs pulses at 1.2s spacing. A new extraction was designed to match these beam properties. A copy of BNL’s magnetron produced at CERN was tested at BNL and delivered at 40 kV H{sup −} beam exceeding Linac4’s nominal intensity of 80 mA. In this contribution, the performances, dynamic response to cesiation, stability and availability of these prototypes are described. The needed optimization of the emittance of H{sup −} beam above 40 mA is presented, which requires an evolution of the front end that encompasses implementation of a large ceramic insulator.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Spanning surface interaction length scales for the design of industrial antifouling materials

Fouling of surfaces introduces significant operational and economic challenges in marine and membrane systems. While empirical fouling assays and surface science methodologies have independently introduced fouling resistant methodologies and functionalities within each of these respective application spaces, they remain limited by their inability to extrapolate findings across length scales and inform materials design strategies. This perspective emphasizes the need to bridge the macroscale fouling assays conducted in the marine community and molecular-scale insights obtained from the membranes community. Here, by uniting these approaches, generalized design strategies can be developed across applications, leading to the realization of effective antifouling materials over a wide spectrum of operating conditions and foulant types. Standardized and high-throughput methodologies are proposed as tools to unify research efforts to drive the development of next-generation antifouling coatings and treatments.

fouling assays↗

Analysis of the Monitoring Network at the Salmon, Mississippi, Site

The Salmon site in southern Mississippi was the location of two underground nuclear tests and two methane-oxygen gas explosion tests conducted in the Tatum Salt Dome at a depth of 2,715 feet below ground surface. The U.S. Atomic Energy Commission (a predecessor agency of the U.S. Department of Energy [DOE]) and the U.S. Department of Defense jointly conducted the tests between 1964 and 1970. The testing operations resulted in surface contamination at multiple locations on the site and contamination of shallow aquifers. No radionuclides from the nuclear tests were released to the surface or to groundwater, although radionuclide-contaminated drill cuttings were brought to the surface during re-entry drilling. Drilling operations generated the largest single volume of waste materials, including radionuclide-contaminated drill cuttings and drilling fluids. Nonradioactive wastes were also generated as part of the testing operations. Site cleanup and decommissioning began in 1971 and officially ended in 1972. DOE conducted additional site characterization between 1992 and 1999. The historical investigations have provided a reasonable understanding of current surface and shallow subsurface conditions at the site, although some additional investigation is desirable. For example, additional hydrologic data would improve confidence in assigning groundwater gradients and flow directions in the aquifers. The U.S. Environmental Protection Agency monitored groundwater at the site as part of its Long-Term Hydrologic Monitoring Program from 1972 through 2007, when DOE's Office of Legacy Management (LM) assumed responsibility for site monitoring. The current monitoring network consists of 28 monitoring wells and 11 surface water locations. Multiple aquifers which underlie the site are monitored. The current analyte list includes metals, radionuclides, and volatile organic compounds (VOCs).

54 ENVIRONMENTAL SCIENCES↗

Surface and bulk two-level-system losses in lithium niobate acoustic resonators

Lithium niobate (LN) is a promising material for building acoustic resonators used in quantum applications, but its performance is limited by poorly understood material defects called two-level systems (TLSs). Here, in this work, we fabricate high-performance acoustic resonators from LN with quality factors up to 6 ×10 7 and use them to separate bulk and surface contributions to TLS loss. By comparing these bulk acoustic wave (BAW) resonators with previous surface-acoustic-wave and phononic-crystal studies, we show that devices with high surface-participation ratios are limited by surface TLSs, while our BAW devices reveal an intrinsic bulk TLS limit. Through systematic surface treatments and microscopy, we demonstrate that BAW resonator performance remains unchanged despite surface modifications, confirming operation in a bulk-limited regime. Here, our work establishes quantitative bounds on both surface and bulk TLS losses in LN within the context of the material growth and fabrication approaches we have pursued, and it provides guidance for future device engineering and materials development.

acoustic wave phenomena↗

Titanium Disulfide Coated Carbon Nanotube Hybrid Electrodes Enable High Energy Density Symmetric Pseudocapacitors

While electrochemical supercapacitors often show high power density and long operation lifetimes, they are plagued by limited energy density. Pseudocapacitive materials, in contrast, operate by fast surface redox reactions and are shown to enhance energy storage of supercapacitors. Furthermore, several reported systems exhibit high capacitance but restricted electrochemical voltage windows, usually no more than 1 V in aqueous electrolytes. Here, it is demonstrated that vertically aligned carbon nanotubes (VACNTs) with uniformly coated, pseudocapacitive titanium disulfide (TiS 2 ) composite electrodes can extend the stable working range to over 3 V to achieve a high capacitance of 195 F g -1 in an Li-rich electrolyte. A symmetric cell demonstrates an energy density of 60.9 Wh kg -1 —the highest among symmetric pseudocapacitors using metal oxides, conducting polymers, 2D transition metal carbides (MXene), and other transition metal dichalcogenides. Nanostructures prepared by an atomic layer deposition/sulfurization process facilitate ion transportation and surface reactions to result in a high power density of 1250 W kg -1 with stable operation over 10 000 cycles. In conclusion, a flexible solid-state supercapacitor prepared by transferring the TiS 2 –VACNT composite film onto Kapton tape is demonstrated to power a 2.2 V light emitting diode (LED) for 1 min.

36 MATERIALS SCIENCE↗

On the accuracy of stratospheric aerosol extinction derived from in situ size distribution measurements and surface area density derived from remote SAGE II and HALOE extinction measurements

In situ stratospheric aerosol measurements, from University of Wyoming optical particle counters (OPCs), are compared with Stratospheric Aerosol Gas Experiment (SAGE) II (versions 6.2 and 7.0) and Halogen Occultation Experiment (HALOE) satellite measurements to investigate differences between SAGE II/HALOE-measured extinction and derived surface area and OPC-derived extinction and surface area. Coincident OPC and SAGE II measurements are compared for a volcanic (1991-1996) and nonvolcanic (1997 2005) period. OPC calculated extinctions agree with SAGE II measurements, within instrumental uncertainty, during the volcanic period, but have been a factor of 2 low during the nonvolcanic period. Three systematic errors associated with the OPC measurements, anisokineticity, inlet particle evaporation, and counting efficiency, were investigated. An overestimation of the OPC counting efficiency is found to be the major source of systematic error. With this correction OPC calculated extinction increases by 15 30% (30 50%) for the volcanic (nonvolcanic) measurements. These changes significantly improve the comparison with SAGE II and HALOE extinctions in the nonvolcanic cases but slightly degrade the agreement in the volcanic period. These corrections have impacts on OPC-derived surface area density, exacerbating the poor agreement between OPC and SAGE II (version 6.2) surface areas. This disparity is reconciled with SAGE II version 7.0 surface areas. For both the volcanic and nonvolcanic cases these changes in OPC counting efficiency and in the operational SAGE II surface area algorithm leave the derived surface areas from both platforms in significantly better agreement and within the 40% precision of the OPC moment calculations.

54 ENVIRONMENTAL SCIENCES↗

Memory effect in composites of liquid crystal and silica aerosil

Aerosil silica nanoparticles dispersed in a liquid crystal (LC) possess the interesting property of keeping memory of an electric- or magnetic-field-induced orientation. Two types of memory have been identified: thermally erasable memory arising from the pinning of defect lines versus a 'permanent' memory where the orientation persists even after thermal cycling the samples up to the isotropic phase. To address the source of the latter type of memory, solid-state nuclear magnetic resonance spectroscopy and conventional x-ray diffraction (XRD) were first combined to characterize the LC orientational order as a function of multiple in-field temperature cycles. Microbeam XRD was then performed on aligned gels of different concentrations to gain knowledge of the structural properties at the origin of the memory effect. No detectable anisotropy of the gel or significant breaking of silica strands with heating ruled out the formation of an anisotropic silica network as the source of the permanent memory as previously proposed. Instead, support for a role of the surface memory effect, well known for planar substrates, in stabilizing the permanent memory was deduced from 'training' of the composites, that is, optimizing the orientational order through the thermal in-field cycling. The ability to train the composites is inversely proportional to the strength of the random-field disorder. The portion of thermally erasable memory also decreases as the silica density increases. We propose that the permanent memory originates from the surface memory effect operating at points of intersection in the silica network. These areas, where the LC is strongly confined with conflicted surface interactions, are trained to achieve an optimized orientation and subsequently act as sites from which the LC orientational order regrows after zero-field thermal cycling up to the isotropic phase.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Containment vessel drain system

A system for draining a containment vessel may include a drain inlet located in a lower portion of the containment vessel. The containment vessel may be at least partially filled with a liquid, and the drain inlet may be located below a surface of the liquid. The system may further comprise an inlet located in an upper portion of the containment vessel. The inlet may be configured to insert pressurized gas into the containment vessel to form a pressurized region above the surface of the liquid, and the pressurized region may operate to apply a surface pressure that forces the liquid into the drain inlet. Additionally, a fluid separation device may be operatively connected to the drain inlet. The fluid separation device may be configured to separate the liquid from the pressurized gas that enters the drain inlet after the surface of the liquid falls below the drain inlet.

42 ENGINEERING↗

Efficient Super-Resolution of Near-Surface Climate Modeling Using the Fourier Neural Operator

Downscaling methods are critical in efficiently generating high-resolution atmospheric data. However, state-of-the-art statistical or dynamical downscaling techniques either suffer from the high computational cost of running a physical model or require high-resolution data to develop a downscaling tool. Here, we demonstrate a recently proposed zero-shot super-resolution method, the Fourier neural operator (FNO), to efficiently perform downscaling without the need for high-resolution data. Because the FNO learns dynamics in Fourier space, FNO is a resolution-invariant emulator; it can be trained at a coarse resolution and produces emulation at any high resolution. We applied FNO to downscale a 4-km resolution Weather Research and Forecasting (WRF) Model simulation of near-surface heat-related variables over the Great Lakes region. The FNO is driven by the atmospheric forcings, and topographic features used in the WRF model at the same resolution. We incorporated a physics-constrained loss in FNO by using the Clausius-Clapeyron relation to better constrain the relations among the emulated states. Trained on merely 600 WRF snapshots at 4-km resolution, the FNO shows comparable performance with a widely used convolutional network, U-Net, achieving averaged modified Kling-Gupta Efficiency of 0.88 and 0.94 on the test dataset for temperature and pressure, respectively. We then employed the FNO to produce 1-km emulations to reproduce the fine climate features. Further, by taking the WRF simulation as ground truth, we show consistent performances at the two resolutions, suggesting the reliability of FNO in producing high-resolution dynamics. Our study demonstrates the potential of using FNO for zero-shot super-resolution in generating first-order estimation on atmospheric modeling.

54 ENVIRONMENTAL SCIENCES↗

A thermal control system for long-term survival of scientific instruments on lunar surface

A thermal control system is being developed for scientific instruments placed on the lunar surface. This thermal control system, Lunar Mission Survival Module (MSM), was designed for scientific instruments that are planned to be operated for over a year in the future Japanese lunar landing mission SELENE-2. For the long-term operations, the lunar surface is a severe environment because the soil (regolith) temperature varies widely from nighttime −200 degC to daytime 100 degC approximately in which space electronics can hardly survive. The MSM has a tent of multi-layered insulators and performs a “regolith mound”. Temperature of internal devices is less variable just like in the lunar underground layers. The insulators retain heat in the regolith soil in the daylight, and it can keep the device warm in the night. We conducted the concept design of the lunar survival module, and estimated its potential by a thermal mathematical model on the assumption of using a lunar seismometer designed for SELENE-2. Thermal vacuum tests were also conducted by using a thermal evaluation model in order to estimate the validity of some thermal parameters assumed in the computed thermal model. The numerical and experimental results indicated a sufficient survivability potential of the concept of our thermal control system.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Oklahoma Mesonet Soil Moisture (OKMSOIL) Value-Added Product Report

Land surface and subsurface state characteristics (e.g., soil moisture) are critical measurements for ongoing weather and climate analyses of land-atmospheric interactions and processes. Knowledge of the variation in soil moisture across the U.S. Department of Energy Atmospheric Radiation Measurement (ARM) user facility’s Southern Great Plains (SGP) observatory domain is anticipated as a key quantity for assessing the potential impact of these interactions. This Oklahoma Mesonet Soil Moisture (OKMSOIL) value-added product (VAP) has been developed in response to growing demand for delivering a long-term measurement record of soil moisture (over an extended area) for such land-atmospheric studies. The Oklahoma Mesonet (OKM) started as a joint project between Oklahoma State University and the University of Oklahoma (Brock 1995). The OKM currently operates over 100 surface Mesonet stations across the state of Oklahoma, with an operational data record that extends into the early 1990s. This dense network of atmospheric and surface state instrumentation enables representation of land surface/subsurface conditions over this region and extended record. Algorithms introduced by previous Oklahoma Mesonet activities (e.g., Scott et al. 2013) are implemented in this documented OKMSOIL VAP to derive a key soil moisture quantity, the volumetric water content (volume of water per volume of soil in units, cm 3 /cm 3 ), from measurements of soil matric potential. These algorithms use a soil hydraulic parameter database (Meso-Soil Database) provided by the Oklahoma Mesonet scientists to estimate this quantity and several additional Mesonet station/sample details.

54 ENVIRONMENTAL SCIENCES↗

Oklahoma Mesonet Soil Moisture (OKMSOIL) Value-Added Product Report

Land surface and subsurface state characteristics (e.g., soil moisture) are critical measurements for ongoing weather and climate analyses of land-atmospheric interactions and processes. Knowledge of the variation in soil moisture across the U.S. Department of Energy Atmospheric Radiation Measurement (ARM) user facility’s Southern Great Plains (SGP) observatory domain is anticipated as a key quantity for assessing the potential impact of these interactions. This Oklahoma Mesonet Soil Moisture (OKMSOIL) value-added product (VAP) has been developed in response to growing demand for delivering a long-term measurement record of soil moisture (over an extended area) for such land-atmospheric studies. The Oklahoma Mesonet (OKM) started as a joint project between Oklahoma State University and the University of Oklahoma (Brock 1995). The OKM currently operates over 100 surface Mesonet stations across the state of Oklahoma, with an operational data record that extends into the early 1990s. This dense network of atmospheric and surface state instrumentation enables representation of land surface/subsurface conditions over this region and extended record. Algorithms introduced by previous Oklahoma Mesonet activities (e.g., Scott et al. 2013) are implemented in this documented OKMSOIL VAP to derive a key soil moisture quantity, the volumetric water content (volume of water per volume of soil in units, cm 3 /cm 3 ), from measurements of soil matric potential. These algorithms use a soil hydraulic parameter database (Meso-Soil Database) provided by the Oklahoma Mesonet scientists to estimate this quantity and several additional Mesonet station/sample details.

58 GEOSCIENCES↗

Water Structure and Properties at Hydrophilic and Hydrophobic Surfaces

The properties of water on both molecular and macroscopic surfaces critically influence a wide range of physical behaviors, with applications spanning from membrane science to catalysis to protein engineering. Yet, our current understanding of water interfacing molecular and material surfaces is incomplete, in part because measurement of water structure and molecular-scale properties challenges even the most advanced experimental characterization techniques and computational approaches. This review highlights progress in the ongoing development of tools working to answer fundamental questions on the principles that govern the interactions between water and surfaces. One outstanding and critical question is what universal molecular signatures capture the hydrophobicity of different surfaces in an operationally meaningful way, since traditional macroscopic hydrophobicity measures like contact angles fail to capture even basic properties of molecular or extended surfaces with any heterogeneity at the nanometer length scale. Resolving this grand challenge will require close interactions between state-of-the-art experiments, simulations, and theory, spanning research groups and using agreed-upon model systems, to synthesize an integrated knowledge of solvation water structure, dynamics, and thermodynamics.

catalysis (heterogeneous)↗

Splice Resistance Measurements in 2G YBCO Coated Conductor

Abstract The Oak Ridge National Laboratory has been investigating the electrical splice resistance of second-generation (2G) YBCO coated conductor. The purpose of the experimental investigation is to study the splice resistance of 2G YBCO coated conductor as a function of: a) operating temperature, b) magnetic field strength (B-field), and c) magnetic field orientation ( ). Understanding the splice resistance with its corresponding variation as a function of surface preparation and operating conditions is essential to the practical implementation of electric utility devices; e.g., motors, generators, transformers, cables, and fault-current limiters, etc. Preliminary test results indicate that the 2G YBCO splice resistance shows a weak temperature dependence and a significantly stronger dependence upon magnetic field strength and magnetic field orientation. Surface preparation conditions are also briefly discussed. Index Terms coated conductor, splice, critical current, YBCO

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Method for warning of radiological and chemical agents using detection paints on a vehicle surface

A paint that warns of radiological or chemical substances comprising a paint operatively connected to the surface, an indicator material carried by the paint that provides an indication of the radiological or chemical substances, and a thermo-activation material carried by the paint. In one embodiment, a method of warning of radiological or chemical substances comprising the steps of painting a surface with an indicator material, and monitoring the surface for indications of the radiological or chemical substances. In another embodiment, a paint is operatively connected to a vehicle and an indicator material is carried by the paint that provides an indication of the radiological or chemical substances.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Poly-Gaussian model of randomly rough surface in rarefied gas flow

Surface roughness is simulated by the model of non-Gaussian random process. Our results for the scattering of rarefied gas atoms from a rough surface using modified approach to the DSMC calculation of rarefied gas flow near a rough surface are developed and generalized applying the poly-Gaussian model representing probability density as the mixture of Gaussian densities. The transformation of the scattering function due to the roughness is characterized by the roughness operator. Simulating rough surface of the walls by the poly-Gaussian random field expressed as integrated Wiener process, we derive a representation of the roughness operator that can be applied in numerical DSMC methods as well as in analytical investigations.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Low temperature laser scanning microscopy of a superconducting radio-frequency cavity

An apparatus was created to obtain, for the first time, 2D maps of the surface resistance of the inner surface of an operating superconducting radio-frequency niobium cavity by a low-temperature laser scanning microscopy technique. This allows identifying non-uniformities of the surface resistance with a spatial resolution of about one order of magnitude better than with earlier methods. A signal-to-noise ratio of about 10 dB was obtained with 240 mW laser power and 1 Hz modulation frequency. The various components of the apparatus, the experimental procedure and results are discussed in details in this contribution.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗