Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “surface effects”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9
All sourcesNASA NTRSDOE OSTI
DOE OSTI2010

Disentangling fluxes of energy and matter in plasma-surface interactions: Effect of process parameters

The possibility to discriminate between the relative importance of the fluxes of energy and matter in plasma-surface interaction is demonstrated by the energy flux measurements in low-temperature plasmas ignited by the radio frequency discharge (power and pressure ranges 50-250 W and 8-11.5 Pa) in Ar, Ar+H{sub 2}, and Ar+H{sub 2}+CH{sub 4} gas mixtures typically used in nanoscale synthesis and processing of silicon- and carbon-based nanostructures. It is shown that by varying the gas composition and pressure, the discharge power, and the surface bias one can effectively control the surface temperature and the matter supply rates. The experimental findings are explained in terms of the plasma-specific reactions in the plasma bulk and on the surface.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2014

Numerical study of the effects of surface topography and chemistry on the wetting transition using the string method

Droplets on a solid surface patterned with microstructures can exhibit the composite Cassie-Baxter (CB) state or the wetted Wenzel state. The stability of the CB state is determined by the energy barrier separating it from the wetted state. In this work, we study the CB to Wenzel transition using the string method [E et al., J. Chem. Phys. 126, 164103 (2007); W. Ren and E. Vanden-Eijnden, J. Chem. Phys. 138, 134105 (2013)]. We compute the transition states and energy barriers for a three-dimensional droplet on patterned surfaces. The liquid-vapor coexistence is modeled using the mean field theory. Numerical results are obtained for surfaces patterned with straight pillars and nails, respectively. It is found that on both type of surfaces, wetting occurs via infiltration of the liquid in a single groove. The reentrant geometry of nails creates large energy barrier for the wetting of the solid surface compared to straight pillars. We also study the effect of surface chemistry, pillar height, and inter-pillar spacing on the energy barrier and compare it with nails.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Modeling plasma-induced surface charge effects on CO 2 activation by single atom catalysts supported on reducible and irreducible metal oxides

Abstract The accumulation of negative surface charge on catalytic surfaces in the presence of low-temperature plasma (LTP) could influence catalytic performance. However, it is difficult to disentangle the role of surface charging and other LTP catalytic effects in experiment. Herein, we use density functional theory (DFT) modeling to understand the effect of plasma-induced surface charging on CO 2 activation by atomically dispersed single atom (SA) catalysts on both reducible and irreducible metal oxide supports. We model CO 2 adsorption strength and CO 2 dissociation barriers for Co 1 , Ni 1 , Cu 1 , Rh 1 , Pd 1 , and Ag 1 SAs on both reducible and irreducible supports, namely, CeO 2 (100), TiO 2 (101), and γ -Al 2 O 3 (110), to elucidate trends. We find that accumulated surface charge on the SA increases the CO 2 adsorption strength and decreases the CO 2 dissociation barrier for all studied SA/support combinations. For both charged and uncharged (neutral) systems, SAs on the reducible CeO 2 (100) support generally adsorb CO 2 more weakly compared to when on irreducible supports like γ -Al 2 O 3 (110). SAs on γ -Al 2 O 3 (110) typically have larger barriers for CO 2 dissociation for both charged and uncharged systems compared to TiO 2 (101) and CeO 2 (100). The magnitude of surface charging effects on CO 2 binding energies and dissociation barriers depends sensitively on both the SA and the support. In some cases, the CO 2 activation trends qualitatively change between neutral and charged systems for a fixed SA across different supports. This DFT modeling study demonstrates that surface charging should be considered in strong electric fields because it can have a large effect on molecule adsorption and bond-breaking on catalytic surfaces.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2010

Effect of Surface Charge on Laser-induced Neutral Atom Desorption

When an ionic metal oxide crystal is cleaved, inhomogeneous electrical charging of the surface can be a result. Such an effect has been well-documented in magnesium oxide (100). For example, recent rigorous AFM studies indicate that nanoscale charged clusters of MgO are created during cleavage, with high concentrations often located at terrace step edges.[1] In addition, ablation processes of freshly cleaved magnesium oxide crystals may be effected by remnant surface charging and microstructures.[2] We report here that such surface charging strongly impacts even neutral atom desorption, even under conditions of extremely mild excitation of surface terrace features. In our experiments, single crystal MgO (100) is cleaved in air and placed in an ultra-high vacuum chamber (UHV). We irradiate the crystal at 6.4 eV, photon energy resonant with five-coordinated (5-C) terrace sites and probe desorbing neutral oxygen atoms. It is found that a significant fraction of desorbed neutral oxygen atoms from the charged surface possess kinetic energies in excess of 0.7 eV. This is in contrast to uncharged samples (discharged in vacuo over 24 hours) that display a near-thermal oxygen atom distribution.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2019

Effect of surface treatment of microfiberlated cellulose fibers on biocomposite properties and additive manufacturing process

Polymer additive manufacturing (AM) is a rapidly growing technology and it is transitioning to become an advanced manufacturing technique with the introduction of fiberlar reinforcing materials such as carbon and glass fibers into polymer feedstock. As a result of increasing environmental and long-term sustainability concerns, there is an increasing interest in using bio-derived cellulose fibers to reinforce composites instead of carbon and glass fibers. Melt extrusion/fused filament fabrication method is the most commonly used polymer AM technique which enables direct digital manufacturing of parts with complex geometry with a controlled anisotropic distribution of reinforcing phase. However, there are multiple factors that affect the mechanical performance of the final part such as the dispersion and orientation of the reinforcing fibers, the adhesion between the fibers and the polymer matrix, and the porosity/defects present in the part. Chemical modification of the surface of the reinforcing fibers is an effective way of improving the fiber-polymer interaction. Furthermore, the improved adhesion between the fibers and the polymer can also enhance the fiber dispersion, improve the rheological behavior of the molten feedstock and minimize the formation of porosity during the printing process, which is one of the major issues in AM. In this study, we are investigating the effect of silane surface treatment of micro-cellulose fibers on the thermal, rheological and mechanical properties of cellulose-PLA biocomposites and on the 3D-printing process. X-ray photoelectron spectroscopy results confirmed the increase in amine and silane groups on the surface of modified fibers, indicating successful functionalization. Thermal and mechanical characterization of modified fiber-PLA composites showed significant increases in storage modulus, glass transition temperature, and complex viscosity compared to neat PLA.

Tekinalp, Halil↗
DOE OSTI2014

Effect of surface Si-Si dimers on photoluminescence of silicon nanocrystals in the silicon dioxide matrix

The effect of surface states of silicon nanocrystals embedded in silicon dioxide on the photoluminescent properties of the nanocrystals is reported. We have investigated the time-resolved and stationary photoluminescence of silicon nanocrystals in the matrix of silicon dioxide in the visible and infrared spectral ranges at 77 and 300 K. The structures containing silicon nanocrystals were prepared by the high-temperature annealing of multilayer SiO{sub x}/SiO{sub 2} films. The understanding of the experimental results on photoluminescence is underlain by a model of autolocalized states arising on surface Si-Si dimers. The emission of autocatalized excitons is found for the first time, and the energy level of the autolocalized states is determined. The effect of these states on the mechanism of the excitation and the photoluminescence properties of nanocrystals is discussed for a wide range of their dimensions. It is reliably shown that the cause of the known blue boundary of photoluminescence of silicon nanocrystals in the silicon dioxide matrix is the capture of free excitons on autolocalized surface states.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2023

Effects of surface vacancy-adatom pair formation on PFC tungsten surface morphological response

Abstract We report a simulation study of the effect of He-irradiation-induced surface vacancy-adatom pair formation on the surface morphological evolution of plasma-facing component (PFC) tungsten and examine a number of factors that impact such evolution. Our analysis is based on self-consistent dynamical simulations according to an atomistically-informed, continuum-scale surface evolution model that has been developed following a hierarchical multiscale modeling strategy and can access the spatiotemporal scales of relevance to fuzz formation. The model accounts for the flux of surface adatoms generated as a result of the surface vacancy-adatom pair formation effect upon He implantation, which contributes to the anisotropic growth of surface nanostructural features due to the different rates of adatom diffusion along and across step edges of islands on the tungsten surface. We have carried out atomic-scale computations of optimal diffusion pathways along and across island step edges on the W(110) surface and calculated Ehrlich–Schwoebel (ES) barriers in adatom diffusion along and across such step edges. This aspect of surface adatom diffusion contributes to anisotropic surface atomic fluxes, terrace and step diffusive currents, and has been incorporated into our PFC surface evolution model, which predicts the formation of preferentially aligned nanoridge stripe patterns on the PFC surface. We establish that these anisotropic diffusive currents accelerate nanotendril growth on the PFC surface and the onset of surface nanostructure pattern formation. We also explore systematically the dependence of the PFC surface morphological response on the surface temperature and He ion incident flux, characterize in detail the resulting surface topographies and growth kinetics, and compare the predicted surface morphologies with experimental observations. Our simulation predictions for the emerging surface nanostructure patterns under certain plasma exposure conditions are consistent with experimental findings in the literature.

36 MATERIALS SCIENCE↗
DOE OSTI2011

Effects of surface roughness and absorption on light propagation in graded-profile waveguides

This paper examines the effects of surface roughness and absorption on laser light propagation in graded-profile waveguiding structures. We derive analytical expressions for the scattering and absorption coefficients of guided waves and analyse these coefficients in relation to parameters of the waveguiding structure and the roughness of its boundary. A new approach is proposed to measuring roughness parameters of precision dielectric surfaces. Experimental evidence is presented which supports the main conclusions of the theory. (integraled-optical waweguides)

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2012

Effects of Surface Treatments on Mechanical Properties and Water Resistance of Kenaf Fiber-Reinforced Unsaturated Polyester Composites

Effects of surface treatments on the strength and water resistance of kenaf fiber-reinforced unsaturated polyester (UPE) composites were investigated. A new coupling agent that consists of 1,6-diisocyanato-hexane (DIH) and 2-hydroxylethyl acrylate (HEA) was investigated for surface treatments of kenaf fibers. The surface treatments were found to significantly enhance the tensile strength, modulus of rupture, modulus of elasticity, and water resistance of the resulting kenaf UPE composites. Fourier transform infrared spectroscopy (FTIR) confirmed that DIH-HEA was covalently bonded onto kenaf fibers. Scanning electron microscopy (SEM) images of the composites revealed that chemical treatment of kenaf fibers with a combination of DIH and HEA improved the interfacial adhesion between kenaf fibers and UPE resin in the DIHHEA-treated kenafUPE composites. The mechanisms by which the chemical treatment of kenaf fiber surfaces improved strength and water resistance of the resulting kenaf UPE composites were discussed.

co-polymerization↗
DOE OSTI2013

Effects of surface oxide formation on germanium nanowire band-edge photoluminescence

The effect of intentional surface oxide formation on band-edge photoluminescence (PL) of Ge nanowires was investigated. Thermal oxidation in molecular O{sub 2} was used to produce a surface oxide layer on assemblies of single crystal nanowires grown by the vapor-liquid-solid method. With increasing oxidation of the wires, the band-edge PL associated with the indirect gap transition becomes more intense. X-ray photoelectron spectroscopy confirms the formation of an increasingly GeO{sub 2}-like surface oxide under annealing conditions that enhance the indirect-gap PL, consistent with surface oxide passivation of nonradiative recombination centers initially present on the nanowire surface.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2023

A prescription for the asteroseismic surface correction

In asteroseismology, the surface effect refers to a disparity between the observed and the modelled frequencies in stars with solar-like oscillations. It originates from improper modelling of the surface layers. Correcting the surface effect usually requires using functions with free parameters, which are conventionally fitted to the observed frequencies. On the basis that the correction should vary smoothly across the H–R diagram, we parameterize it as a simple function of surface gravity, effective temperature, and metallicity. We determine this function by fitting a wide range of stars. The absolute amount of the surface correction decreases with luminosity, but the ratio between it and νmax increases, suggesting the surface effect is more important for red giants than dwarfs. Applying the prescription can eliminate unrealistic surface correction, which improves parameter estimations with stellar modelling. Using two open clusters, we found a reduction of scatter in the model-derived ages for each star in the same cluster. As an important application, we provide a new revision for the Δν scaling relation that, for the first time, accounts for the surface correction. The values of the correction factor, f Δν , are up to 2 percent smaller than those determined without the surface effect considered, suggesting decreases of up to 4 percent in radii and up to 8 percent in masses when using the asteroseismic scaling relations. This revision brings the asteroseismic properties into an agreement with those determined from eclipsing binaries. The new correction factor and the stellar models with the corrected frequencies are available at https://www.github.com/parallelpro/surface.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2011

Effects of surface morphology on the retention loss of ferroelectric domains in poly(vinylidenefluoride-co-trifluoroethylene) thin films.

Effects of surface morphology on the retention loss of ferroelectric domains of poly(vinylidenefluoride-co-trifluoroethylene) thin films were investigated using piezoresponse force microscopy. We found that the retention loss occurred by nucleation of opposite domains at the regions with morphological gradients between 0.079 and 0.146. In addition, we observed collective decreases in piezoresponse amplitude of the opposite domains after 0.8 x 10{sup 6} s, although each reversed domain showed different growth rate as evidenced by different threshold time for phase reversal. These results suggest that the surface morphology has a strong influence in determining the nucleation and growth kinetics by which the retention loss occurs.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Capturing Surface Coverage Effects in Heterogeneous Catalysis

Adsorbate–adsorbate lateral interactions at relevant surface coverages have a significant effect on chemical kinetics, thereby influencing the activity of a heterogeneous catalyst. Coverage-dependent kinetic and thermodynamic parameters therefore must be included in studies of such complex systems to properly predict the turnover frequencies and kinetic trends. Thus, it becomes extremely important to accurately capture the strength of lateral interactions between neighboring species under realistic reaction conditions. In this Perspective, we discuss the various existing computational and experimental methods for determining adspecies coverage and configurational effects. The choice of the tools and methods employed in such studies depends on factors such as time, length scales, computational cost, the presence of solvents, and reaction conditions. The applications of each method and the respective challenges are also discussed here. As a result, we discuss the recent developments and future of the state-of-the-art for inclusion of surface coverage and configuration into a holistic picture for accurate predictions of catalytic behavior.

09 BIOMASS FUELS↗
DOE OSTI2013

A Climatology of Surface Cloud Radiative Effects at the ARM Tropical Western Pacific Sites

Cloud radiative effects on surface downwelling fluxes are investigated using long-term datasets from the three Atmospheric Radiation Measurement (ARM) sites in the Tropical Western Pacific (TWP) region. The Nauru and Darwin sites show significant variability in sky cover, downwelling radiative fluxes, and surface cloud radiative effect (CRE) due to El Niño and the Australian monsoon, respectively, while the Manus site shows little intra-seasonal or interannual variability. Cloud radar measurement of cloud base and top heights are used to define cloud types so that the effect of cloud type on the surface CRE can be examined. Clouds with low bases contribute 71-75% of the surface shortwave (SW) CRE and 66-74% of the surface longwave (LW) CRE at the three TWP sites, while clouds with mid-level bases contribute 8-9% of the SW CRE and 12-14% of the LW CRE, and clouds with high bases contribute 16-19% of the SW CRE and 15-21% of the LW CRE.

ARM↗
DOE OSTI2016

Apparent permeability prediction of organic shale with generalized lattice Boltzmann model considering surface diffusion effect

Gas flow in shale is associated with both organic matter (OM) and inorganic matter (IOM) which contain nano-pores ranging in size from a few to hundreds of nano-meters. In addition to the non-continuum effect which leads to an apparent permeability of gas higher than the intrinsic permeability, the surface diffusion of adsorbed gas in organic pores also can influence the apparent permeability through its own transport mechanism. In this study, a generalized lattice Boltzmann model (GLBM) is employed for gas flow through the reconstructed shale matrix consisting of OM and IOM. The Expectation–Maximization (EM) algorithm is used to assign the pore size distribution to each component, and the dusty gas model (DGM) and generalized Maxwell–Stefan model (GMS) are adopted to calculate the apparent permeability accounting for multiple transport mechanisms including viscous flow, Knudsen diffusion and surface diffusion. Effects of pore radius and pressure on permeability of both IOM and OM as well as effects of Langmuir parameters on OM are investigated. The effect of total organic content and distribution on the apparent permeability of the reconstructed shale matrix at different surface diffusivity is also studied. It is found that the influence of pore size and pressure on the apparent permeability of organic matter is affected by the surface diffusion of adsorbed gas. Furthermore, surface diffusion plays a significant role in determining apparent permeability and the velocity distribution of shale matrix.

02 PETROLEUM↗
DOE OSTI2016

Pore-scale lattice Boltzmann simulation of micro-gaseous flow considering surface diffusion effect

Some recent studies have shown that adsorbed gas and its surface diffusion have profound influence on micro-gaseous flow through organic pores in shale gas reservoirs. Here, a multiple-relaxation-time (MRT) LB model is adopted to estimate the apparent permeability of organic shale and a new boundary condition, which combines Langmuir adsorption theory with Maxwellian diffusive reflection boundary condition, is proposed to capture gas slip and surface diffusion of adsorbed gas. The simulation results match well with previous studies carried out using Molecular Dynamics (MD) and show that Maxwell slip boundary condition fails to characterize gas transport in the near wall region under the influence of the adsorbed gas. The total molar flux can be either enhanced or reduced depending on variations in adsorbed gas coverage and surface diffusion velocity. The effects of pore width, pressure as well as Langmuir properties on apparent permeability of methane transport in organic pores are further studied. It is found that the surface transport plays a significant role in determining the apparent permeability, and the variation of apparent permeability with pore size and pressure is affected by the adsorption and surface diffusion.

04 OIL SHALES AND TAR SANDS↗
DOE OSTI2015

Isotope analysis of diamond-surface passivation effect of high-temperature H{sub 2}O-grown atomic layer deposition-Al{sub 2}O{sub 3} films

The Al{sub 2}O{sub 3} film formed using an atomic layer deposition (ALD) method with trimethylaluminum as Al precursor and H{sub 2}O as oxidant at a high temperature (450 °C) effectively passivates the p-type surface conduction (SC) layer specific to a hydrogen-terminated diamond surface, leading to a successful operation of diamond SC field-effect transistors at 400 °C. In order to investigate this excellent passivation effect, we carried out an isotope analysis using D{sub 2}O instead of H{sub 2}O in the ALD and found that the Al{sub 2}O{sub 3} film formed at a conventional temperature (100 °C) incorporates 50 times more CH{sub 3} groups than the high-temperature film. This CH{sub 3} is supposed to dissociate from the film when heated afterwards at a higher temperature (550 °C) and causes peeling patterns on the H-terminated surface. The high-temperature film is free from this problem and has the largest mass density and dielectric constant among those investigated in this study. The isotope analysis also unveiled a relatively active H-exchange reaction between the diamond H-termination and H{sub 2}O oxidant during the high-temperature ALD, the SC still being kept intact. This dynamic and yet steady H termination is realized by the suppressed oxidation due to the endothermic reaction with H{sub 2}O. Additionally, we not only observed the kinetic isotope effect in the form of reduced growth rate of D{sub 2}O-oxidant ALD but found that the mass density and dielectric constant of D{sub 2}O-grown Al{sub 2}O{sub 3} films are smaller than those of H{sub 2}O-grown films. This is a new type of isotope effect, which is not caused by the presence of isotopes in the films unlike the traditional isotope effects that originate from the presence of isotopes itself. Hence, the high-temperature ALD is very effective in forming Al{sub 2}O{sub 3} films as a passivation and/or gate-insulation layer of high-temperature-operation diamond SC devices, and the knowledge of the aforementioned new isotope effect will be a basis for further enhancing ALD technologies in general.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2020

Quantitatively accounting for the effects of surface topography on the oxidation kinetics of additive manufactured Hastelloy X processed by electron beam melting

In this work, the effects of surface roughness on the high-temperature corrosion of nickel-based superalloy X produced through electron-beam melting (EBM) additive manufacturing were studied. Surface area of samples in the rough, as-fabricated condition was measured using a 2D cross-section image analysis technique and a 3D image analysis technique. To verify the accuracy of surface area measurements, oxidation testing of samples in the as-fabricated and polished conditions was performed; polished sample oxidation curves were then compared to the as-fabricated sample oxidation curves before and after being adjusted using obtained surface area measurements. It was found that the 2D technique accurately measured surface area and accounted for the overlapping features present on EBM sample surfaces, whereas the 3D technique did not. Further, it was also observed that oxidation kinetics were moderately faster on the alloy X samples in the as-fabricated condition than for the polished condition.

36 MATERIALS SCIENCE↗