Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “surface and interface chemistry”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

X-ray photoelectron spectroscopy of surfactants on sub-micron aqueous aerosols

Organic molecules at the aqueous interfaces of droplets and aerosols can influence multiphase chemistry and cloud condensation nuclei activity. While surface tension measurements on flat surfaces are commonly used to quantify organic partitioning and structure, extending these measurements to more realistic aerosols that might exist in metastable, supercooled and supersaturated states remains a challenge. Here, we use aerosol velocity map imaging X-ray photoelectron spectroscopy (A-VMI-XPS), a surface-sensitive and in situ technique, to study the partitioning and structure of a model surfactant (n-octyl β-D-thioglucopyranoside, OTG) in submicron aqueous aerosols with a mean radius of 116 nm. After accounting for finite size effects and evaporative cooling, we find the bulk concentrations of OTG in the aerosol are depleted 600-fold relative to macroscopic solutions. At the low temperatures of the experiment (ca. ∼188 K), we obtain a Langmuir equilibrium constant of 700 m3 mol-1, which corresponds to 4.9 m3 mol-1 at room temperature; a value that is consistent with prior literature reports. Analysis of photoelectron angular distributions, peak areas, and secondary electron escape barriers indicates a transition from a disordered surfactant layer at low [OTG] to a more structured layer at high [OTG]. These results link macroscopic surface tension measurements to nanoparticle surfactant behavior and demonstrate the utility of A-VMI-XPS in probing surfactant coating structure on free aerosols, with implications for understanding the impact of organic coatings on cloud formation and atmospheric chemistry.

Deal, Alexandra M↗
DOE OSTI2021

Visually resolving the direct Z-scheme heterojunction in CdS@ZnIn 2 S 4 hollow cubes for photocatalytic evolution of H 2 and H 2 O 2 from pure water

We report the direct Z-scheme heterojunction has been recently emerging as an appealing architecture for photocatalysts design. Its efficiency depends on the interfacial and structural features of the photocatalysts. Herein, the two-dimensional ZnIn 2 S 4 nanosheets are grown on the surface of CdS hollow cubes to construct the CdS@ZnIn 2 S 4 hierarchical hollow photocatalysts with chemically bonded interface. The visualized measurements based on spatial-resolved surface photovoltage spectroscopy, combined with other spectroscopic and simulation investigations, clearly disclose that the CdS@ZnIn 2 S 4 hollow cubes constitute a highly efficient direct Z-scheme system. This accounts for the stoichiometric generation of H 2 and H 2 O 2 from pure water observed for the CdS@ZnIn 2 S 4 sulfide-only photocatalysts under visible light irradiation with an apparent quantum efficiency of 1.63 % at 400 nm. The present work demonstrates an effective protocol to achieve comprehensive insights into the charge transfer route at semiconductor heterojunction, and offers a viable way for constructing efficient sulfide-only photocatalysts for driving water splitting reaction.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

pH-dependent reactivity of water at MgO(100) and MgO(111) surfaces

Facet-dependent surface charging of metal oxides in water dominates the ion transport behavior across the interface, in turn impacting many natural and industrial processes such as adsorption, the formation and stabilization of nanoparticle suspensions, corrosion, and heterogeneous catalysis. Here we investigated the pH-dependent surface chemistry of two low-index MgO single crystal surfaces, namely MgO(100) and MgO(111), using vibrational sum frequency generation (vSFG) spectroscopy. This allowed us to evaluate facet-dependent pH effects on the hydration and hydroxylation at the solid/aqueous interface and point-of-zero charge (PZC) values. The MgO system is complicated by its thermodynamic instability with respect to Mg(OH) 2 in water at ambient conditions. Here, for both hydroxylated MgO(100) and MgO(111) surfaces, the PZC is found to be around pH ∼ 12, which compares well with reported values for MgO single crystal and nanoparticle surfaces. However, structure specific differences in the molecular water hydrogen bonding network near the surface are evident at mildly acidic pH. To our knowledge, this is the first account of the PZC values for the MgO(111) single-crystal surface, an electrostatically unstable MgO termination that is prone to reconstruction.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

In Situ ATR-FTIR Study of the Cathode–Electrolyte Interphase: Electrolyte Solution Structure, Transition Metal Redox, and Surface Layer Evolution

We present a study of the lithium nickel manganese cobalt oxide (LiNi 0.6 Mn 0.2 Co 0.2 O 2 , NMC622) cathode-electrolyte interphase (CEI) during galvanostatic charging and discharging using in situ attenuated total reflectance Fourier transform infrared (ATR-FTIR) methods to investigate the voltage dependent electrolyte solution structure changes at the interface, transition metal (TM) redox chemistry, and cathode/electrolyte interfacial layer evolution. Furthermore, our in situ cell design provides both reliable electrochemical device testing and strong FTIR vibrational absorption signals near the cathode surface. Specifically, advanced spectral analysis elucidates changes of near-surface Li+ ion (de)solvation by solvent molecules during galvanostatic cycling. Moreover, cathode metal-oxygen vibrational absorptions, sensitive to TM redox behaviors and subsequent local structural variations, were correlated to cathode de-lithiation (and lithiation) and electrolyte solution structure changes. In addition, we have detected the formation and evolution of a CEI surface layer on the NMC622 cathode that contributes to the cell's capacity fade.

25 ENERGY STORAGE↗
DOE OSTI2026

Thermodynamic Control of Interface Directs MnO 2 Nucleation Chemistry for Dense and Conformal Electrodeposition

Manganese dioxide (MnO 2 ) is widely recognized as a promising material for high-energy-density energy storage systems due to its broad applicability and facile electrodeposition. However, achieving uniform, thin, and high-mass-loading MnO 2 coatings on high-surface-area electrodes remains a significant challenge. Conventional electrodeposition methods typically yield nonuniform, thick layers with poor conductivity and limited material utilization, restricting their practical use. Here, we uncover a thermodynamically engineered vanadyl/pervanadyl (VO 2+ /VO 2 + ) interface that fundamentally reshapes MnO 2 electrodeposition chemistry, enabling highly uniform and dense coatings. Here, combining in situ AFM measurement, Classical Nucleation Theory, and Johnson–Mehl–Avrami–Kolmogorov modeling, we show that this interface reduces early-stage detectable MnO 2 island size by 35-fold and shifts the MnO 2 growth from diffusion-limited to reaction-limited progressive nucleation. This thermodynamically controlled interface yields highly dense and conformal MnO 2 films with record-high mass loading of 241 mg cm –2 (1607 mg cm –3 ) on 3D-printed graphene aerogels, without compromising porosity or inducing thickness gradient. As a prototype demonstration, the resulting MnO 2 electrodes deliver record-setting volumetric performance in both capacitors (106 F cm –3 ) and Zn//MnO 2 pouch cells (162 mAh cm –3 ). Beyond energy storage, our findings demonstrate the significance of thermodynamic interface control in MnO 2 nucleation chemistry for achieving dense and uniform coatings on various substrates, with implications for electrocatalysis, semiconductor processing, and advanced materials manufacturing.

Batteries↗
DOE OSTI2020

Real-time mass spectrometric characterization of the solid–electrolyte interphase of a lithium-ion battery

Solid-electrolyte interphase (SEI) is a key component that dictates the performance of most electrochemical devices, but the understanding of its chemistry and structure has been limited by the lack of in-situ tools. In this work, we report SEI live-formation in Li-ion battery under operando condition with liquid secondary ion mass spectrometry (SIMS), which, in combination with molecular dynamics (MD) simulation, presents the first dynamic picture with molecular-accuracy about this key component. Before any interphasial chemistry occurs during the initial charging, an electric double layer forms at the electrode-electrolyte interface via the self-assembly of solvent molecules directed by both Li+ and potential of the electrified surface. Such double layer structure predicts the eventual interphasial chemistries formed from the electrolytes, where the negatively-charged electrode surface repels salt anions from the inner-Helmholtz layer and results in an inner SEI that is thin, dense and inorganic in nature but LiF-depleted. It was this dense layer that exercises the major functions of an interphase, i.e., conducting Li+ but insulating electrons. An outer layer that is electrolyte-permeable and organic-rich appears after formation of the inner SEI. In highly-concentrated electrolyte, the presence of LiF in the inner-SEI is raised due to the high population of salt anions in the double layer. These real-time observations at nano-scale reveal in general sense how an interphase inherits chemistry from inner-Helmholtz layer structure, and establish guidelines in engineering desirable interphases for the future battery chemistries.

Zhou, Yufan↗
DOE OSTI2025

Nanopinhole-Enabled, Hole-Selective Poly-Si/SioxNy Passivating Contacts on Textured c-Si for Si Solar Cells

The next-generation silicon photovoltaics will be based on passivating electron- and hole-selective contacts with both very low interface recombination and contact resistivities. While the emerging mainstream TOPCon technology has developed excellent electron-selective poly-Si/tunneling SiOx contacts, hole-selective contacts, especially on textured surfaces, have remained a significant challenge. This contribution introduces novel high-performance hole selective poly-Si contacts on pyramid-textured Si, enabled by electrochemically produced hole transport nanopinholes in a 10 nm oxynitride passivating dielectric stack capped by p+ poly-Si. The highly passivating oxynitride layer is produced via atomic intermixing of O and N atoms in the initial SiOx/SiNy layer stack upon thermal annealing. Carrier transport is governed by nanopinhole density and size are tuned by Ag nanoparticle electrodeposition and surface attachment chemistries. This results in passivating hole contact resistivities in the m..omega..-cm2 range, while preserving interface recombination current prefactor around 5 fA/cm2.

14 SOLAR ENERGY↗
DOE OSTI2020

Erratum to: Soft- and reactive landing of ions onto surfaces: concepts and applications

Soft- and reactive landing of mass-selected ions is gaining attention as a promising approach for the precisely-controlled preparation of materials on surfaces that are not amenable to deposition using conventional methods. A broad range of ionization sources and mass filters are available that make ion soft-landing a versatile tool for surface modification using beams of hyperthermal (<100?eV) ions. The ability to select the mass-to-charge ratio of the ion, its kinetic energy and charge state, along with precise control of the size, shape, and position of the ion beam on the deposition target distinguishes ion soft landing from other surface modification techniques. Soft- and reactive landing have been used to prepare interfaces for practical applications as well as precisely-defined model surfaces for fundamental investigations in chemistry, physics, and materials science. For instance, soft- and reactive landing have been applied to study the surface chemistry of ions isolated in the gas-phase, prepare arrays of proteins for high-throughput biological screening, produce novel carbon-based and polymer materials, enrich the secondary structure of peptides and the chirality of organic molecules, immobilize electrochemically-active proteins and organometallics on electrodes, create thin films of complex molecules, and immobilize catalytically active organometallics as well as ligated metal clusters. In addition, soft landing has enabled investigation of the size-dependent behavior of bare metal clusters in the critical subnanometer size regime where chemical and physical properties do not scale predictably with size. The morphology, aggregation, and immobilization of larger bare metal nanoparticles, which are directly relevant to the design of catalysts as well as improved memory and electronic devices, have also been studied using ion soft landing. This review article begins in section 1 with a brief introduction to the existing applications of ion soft- and reactive landing. Section 2 provides an overview of the ionization sources and mass filters that have been used to date for soft landing of mass-selected ions. A discussion of the competing processes that occur during ion deposition as well as the types of ions and surfaces that have been investigated follows in section 3. Section 4 discusses the physical phenomena that occur during and after ion soft landing, including retention and reduction of ionic charge along with factors that impact the efficiency of ion deposition. The influence of soft landing on the secondary structure and biological activity of complex ions is addressed in section 5. Lastly, an overview of the structure and mobility as well as the catalytic, optical, magnetic, and redox properties of bare ionic clusters and nanoparticles deposited onto surfaces is presented in section 6. © 2015 Wiley Periodicals, Inc. Mass Spec Rev 35:439–479, 2016.

Johnson, Grant E.↗
DOE OSTI2021

Surface Dynamics of Charge Transport in LaAlO 3 /SrTiO 3 with Time-Resolved Kelvin Probe Force Microscopy

Time-resolved Kelvin probe force microscopy (tr-KPFM) was used to map surface potential dynamics in LAO/STO under its critical thickness, where it acts as an insulator, as polarizing and depolarizing electric fields were applied to planar electrodes in ambient conditions. Two time constants, for polarization and relaxation (i.e., depolarization) each, were derived and were shown to be independent of the direction of electrical field, revealing the reproducibility and recovery of the surfaces. Ambient aging or recent electrical history did not change the surface kinetics as determined by tr-KPFM. During polarization, the faster time constant (~3–6 s) is likely associated with the transport of H+ ions through the full length of the channel. The slower time constant (~40–50 s), on the other hand, is observed across only half the channel width near the higher-potential–more positive–electrode, which is likely associated with an electrochemical reaction such as the dissociation of water. This slower time constant drops to ~10–20 s toward the middle of the channel which could represent the transport of OH– ions. Furthermore, during relaxation, the fast time constant is consistent with polarization and is correlated to the same mechanism while the slower time constant is higher than it was during polarization and may represent the reabsorption of moisture from the atmosphere.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Beyond Idealized Models of Nanoscale Metal Hydrides for Hydrogen Storage

Metal hydrides are attractive for compact, low-pressure hydrogen storage, yet a foundational understanding of factors governing their thermodynamics and kinetics is still lacking. Predictive modeling from the atomic to the microstructural scale plays a critical role in addressing these gaps, particularly for nanoscale materials, which promise improved performance but are difficult to probe. In this paper, we summarize strategies being developed within the Hydrogen Materials—Advanced Research Consortium (HyMARC) for going beyond conventional models to incorporate more complex physics, more realistic structures, and better approximation of operation conditions in simulations of nanoscale metal hydrides. We highlight four beyond-ideal factors that influence predicted performance: (1) surface anharmonic dynamics, (2) interface and surface energy penalties, (3) mechanical stress under confinement, and (4) the presence of native surface oxide. Approaches for addressing these factors are demonstrated on model materials representative of high-capacity hydrogen storage systems, and implications for understanding performance under operating conditions are discussed.

08 HYDROGEN↗
DOE OSTI2024

Superhydrophobic Array Devices for the Enhanced Formation of 3D Cancer Models

During the metastatic cascade, cancer cells travel through the bloodstream as circulating tumor cells (CTCs) to a secondary site. Clustered CTCs have greater shear stress and treatment resistance, yet their biology remains poorly understood. We therefore engineered a tunable superhydrophobic array device (SHArD). The SHArD-C was applied to culture a clinically relevant model of CTC clusters. Using our device, we cultured a model of cancer cell aggregates of various sizes with immortalized cancer cell lines. These exhibited higher E-cadherin expression and are significantly more capable of surviving high fluid shear stress-related forces compared to single cells and model clusters grown using the control method, helping to explain why clustering may provide a metastatic advantage. Additionally, the SHArD-S, when compared with the AggreWell 800 method, provides a more consistent spheroid-forming device culturing reproducible sizes of spheroids for multiple cancer cell lines. Overall, we designed, fabricated, and validated an easily tunable engineered device which grows physiologically relevant three-dimensional (3D) cancer models containing tens to thousands of cells.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

The coupling and competition of crystallization and phase separation, correlating thermodynamics and kinetics in OPV morphology and performances

The active layer morphology transition of organic photovoltaics under non-equilibrium conditions are of vital importance in determining the device power conversion efficiency and stability; however, a general and unified picture on this issue has not been well addressed. Using combined in situ and ex situ morphology characterizations, morphological parameters relating to kinetics and thermodynamics of morphology evolution are extracted and studied in model systems under thermal annealing. The coupling and competition of crystallization and demixing are found to be critical in morphology evolution, phase purification and interfacial orientation. A unified model summarizing different phase diagrams and all possible kinetic routes is proposed. The current observations address the fundamental issues underlying the formation of the complex multi-length scale morphology in bulk heterojunction blends and provide useful morphology optimization guidelines for processing devices with higher efficiency and stability.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Methanol at Water–TiO 2 Interfaces: Free Energies of Water and Methanol Dissociation

Methanol adsorption on TiO 2 surfaces has long been studied due to its role in enhancing photocatalytic hydrogen evolution, yet how it modulates surface chemistry under aqueous conditions remains little understood. Using molecular dynamics with an ab initio-based deep neural network potential, we find that methanol adsorption induces markedly different effects on the aqueous surfaces of anatase and rutile, the two common phases of TiO 2 . In anatase, methanol adsorption significantly enhances water dissociation, which is otherwise rare at the neat water interface. This enhancement arises from an alternative dissociation pathway mediated by surface-bound methoxyl groups. In contrast, methanol adsorption tends to suppress water dissociation on rutile, replacing it with thermodynamically favored methanol dissociation. Overall, methanol adsorption in an aqueous environment alters not only the availability of key reactive intermediates involved in hydrogen evolution but also the hydrogen source, which turns out to be primarily methanol on rutile, whereas both water and methanol are consumed on anatase. These results provide mechanistic insights into the coupled roles of organic adsorbates and water at photocatalytic interfaces, with implications on how methanol enhances the activity of H 2 evolution.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Surface Charge at an Oil/Water Interface Promoting the Enhancement and Assignment of Water Combination Bands

Given the different polarities and distinct chemical structures, it is no wonder that oil and water are incompatible neighbors. They can be forced to cooperate if provided sufficient energy or a suitable intermediary. Emulsions are the result of such a cooperation, where an emulsifying agent (the intermediary) in the form of a surfactant or a cocktail of surface stabilizing compounds allows for the ‘mixing’ of oil and water. Surfactant stabilized emulsions that are nanoscale in size (nanoemulsions) have caught the attention of many because of their newly discovered use in the synthesis of nanomaterials, oil recovery, drug delivery, and food science. Unlike smaller emulsions (e.g. microemulsions with 2-20 nm diameters), very little is known about the molecular level properties of nanoemulsions (NEs) whose diameters are in the 100-500 nm range. One thing that is well known is the macroscopic properties of droplets from these two size regimes are dramatically different, often for reasons not yet fully understood. Nanoemulsions do not form spontaneously and require an external shear beyond ordinary procedures used to create micelles. This shear is required to overcome the effects of surface tension and create droplets in the nanoscale regime. Once formed, however, they can be stable for long periods of time, making them very attractive for commercial and pharmaceutical products requiring a long shelf life. What is not well known is the interfacial molecular processes that lead to the formation and stability of nanoemulsions including those stabilized by surfactants and/or polymers. Such knowledge is important in understanding the molecular structure-function relationship that assists in predicting what additives and solvents are necessary for a specific application. Key to advancing nanoemulsion utility is to develop the needed molecular-level understanding of the structure and bonding interactions present at the surface of these soft nanoparticles.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Hydrogen Bonds and H 3 O + Formation at the Water Interface with Formic Acid Covered Anatase TiO 2

Carboxylic acid-modified TiO 2 surfaces in aqueous environment are of widespread interest, yet atomic-scale understanding of their structure is limited. In this work, we investigate formic acid (FA) on anatase TiO 2 (101) (A-101) in contact with water using density functional theory (DFT) and ab-initio molecular dynamics (AIMD). Isolated FA molecules adsorbed in a deprotonated bridging bidentate (BD) form on A-101 are found to remain stable at the interface with water, with the acid proton transferred to a surface oxygen to form a surface bridging hydroxyl (O br H). With increasing FA coverage, adsorbed monolayers of only BD and successively of alternating monodentate (MD) and BD species give rise to a higher concentration of surface O br H’s. Simulations of these adsorbed monolayers in water environment show that some protons are released from the surface O br H’s to water resulting in a negatively charged surface with nearby solvated H 3 O + ions. These results provide insight into the complex acid-base equilibrium between an oxide surface, adsorbates and water and can also help obtain a better understanding of the wetting properties of chemically modified TiO 2 surfaces.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Relationships between Water’s Structure and Solute Affinity at Polypeptoid Brush Surfaces

Excellent antifouling surfaces are generally thought to create a tightly bound layer of water that resists solute adsorption, and highly hydrophilic surfaces such as those with zwitterionic functionalities are of significant current interest as antifoulant strategies. Furthermore, despite significant proofs-of-concept, we still lack a fundamental understanding of how the nanoscopic structure of this hydration layer translates to reduced fouling, how surface chemistry can be tuned to achieve antifouling through hydration water, and why, in particular, zwitterionic surfaces seem so promising. Here, we use molecular dynamics simulations and free energy calculations to investigate the molecular relationships among surface chemistry, hydration water structure, and surface–solute affinity across a variety of surface-decorated chemistries. Specifically, we consider polypeptoid-decorated surfaces that display well-known experimental antifouling capabilities and that can be synthesized sequence specifically, with precise backbone positioning of, e.g., charged groups. Through simulations, we calculate the affinities of a range of small solutes to polypeptoid brush surfaces of varied side-chain chemistries. We then demonstrate that measures of the structure of surface hydration water in response to a particular surface chemistry signal solute–surface affinity; specifically, we find that zwitterionic chemistries produce solute–surface repulsion through highly coordinated hydration water while suppressing tetrahedral structuring around the solute, in contrast to uncharged surfaces that show solute–surface affinity. Based on the relationship of this structural perturbation to the affinity of small-molecule solutes, we propose a molecular mechanism by which zwitterionic surface chemistries enhance solute repulsion, with broader implications for the design of antifouling surfaces.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Interface, bulk and surface structure of heteroepitaxial altermagnetic α-MnTe films grown on GaAs(111)

Epitaxial MnTe films have recently seen a surge in research into their altermagnetic semiconducting properties. However, those properties may be extremely sensitive to structural and chemical modifications. We report a detailed investigation of the synthesis of the altermagnet α-MnTe on GaAs(111), which reveals the bulk defect structure of this material, the mechanism by which it releases strain from the underlying substrate, and the impact of oxidation on its surface. X-ray diffraction measurements show that α-MnTe layers with thicknesses spanning 45 to 640 nm acquire lattice parameters different from bulk, mostly due to thermal strain caused by the substrate rather than strain from the lattice mismatch. Through high-resolution transmission electron microscopy (TEM) measurement, we then unveil a misfit dislocation array at the interface, revealing the mechanism by which lattice strain is relaxed. TEM also reveals a stacking fault in the bulk, occurring along a glide plane parallel to the interface. The combination of TEM with polarized neutron reflectometry measurements finally reveals the impact of oxidation on the chemistry of the surface of uncapped MnTe. Furthermore, or findings highlight the subtle role of epitaxy in altering the structure of α-MnTe, providing potential opportunities to tune the altermagnetic properties of this material.

Altermagnets↗